12 Nov
2005
12 Nov
'05
2:51 p.m.
Greetings Serg,
You should start by reading the README and INSTALL files found in the
mediaproxy package. Then you will need to load the mediaproxy.so
module with all your modules listed at the top of your ser.cfg. You'll
also need make your specific config changes in mediaproxy.ini. I would
also suggest looking at the onsip.org mediaproxy ser.cfg example. Hope
this helps.
- Daryl
On 11/12/05, messa(a)innsof.com <messa(a)innsof.com> wrote:
Hi all
I want to use madiaproxy module to do nat transversal. But it not work
for me. I run the media proxy server (proxy server) in the same host
than openser on a host with public IP and i set the openser
configuration file to above:
#
# $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
#Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/openser_fifo"
#loadmodule "/usr/local/lib/openser/modules/mysql.so"
loadmodule "/usr/local/lib/openser/modules/sl.so"
loadmodule "/usr/local/lib/openser/modules/tm.so"
loadmodule "/usr/local/lib/openser/modules/rr.so"
loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
loadmodule "/usr/local/lib/openser/modules/usrloc.so"
loadmodule "/usr/local/lib/openser/modules/registrar.so"
#loadmodule "/usr/local/lib/openser/modules/auth.so"
#loadmodule "/usr/local/lib/openser/modules/auth_radius.so"
#loadmodule "/usr/local/lib/openser/modules/auth_db.so"
loadmodule "/usr/local/lib/openser/modules/uri.so"
#loadmodule "/usr/local/lib/openser/modules/domain.so"
loadmodule "/usr/local/lib/openser/modules/nathelper.so"
loadmodule "/usr/local/lib/openser/modules/textops.so"
#loadmodule "/usr/local/lib/openser/modules/uri_db.so"
#loadmodule "/usr/local/lib/openser/modules/uri_radius.so"
#modparam("auth_db|usrloc|uri_db",
"db_url","mysql://ser:heslo@localhost/ser")
#modparam("auth_db", "calculate_ha1", 1)
#modparam("auth_db", "password_column", "password")
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "rtpproxy_disable", 1)
modparam("nathelper",
"rtpproxy_sock","unix:/var/run/rtpproxy.sock")
modparam("usrloc", "db_mode", 0)
modparam("registrar", "nat_flag", 6)
modparam("rr", "enable_full_lr", 1)
route {
#----------------------------------------------------------------
# Sanity Check Section
#-----------------------------------------------------------------
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
exit;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message Overflow");
exit;
};
#-----------------------------------------------------------------
# Record Route Section
#-----------------------------------------------------------------
if (method!="REGISTER") {
record_route();
};
if (method=="BYE" || method=="CANCEL") {
unforce_rtp_proxy();
};
#-----------------------------------------------------------------
# Loose Route Section
#-----------------------------------------------------------------
if (loose_route()) {
if (has_totag() && method=="INVITE") {
if (nat_uac_test("19")) {
setflag(6);
force_rport();
fix_nated_contact();
};
force_rtp_proxy("l");
};
route(1);
exit;
};
#-----------------------------------------------------------------
# Call Type Processing Section
#-----------------------------------------------------------------
if (uri==myself) {
if (method=="INVITE") {
route(3);
exit;
} else if (method=="REGISTER") {
route(2);
exit;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not
Found");
exit;
};
route(1);
};
}
route[1] {
#-----------------------------------------------------------------
# Default Message Handler
#-----------------------------------------------------------------
t_on_reply("1");
if (!t_relay()) {
if (method=="INVITE" && isflagset(6)) {
unforce_rtp_proxy();
};
sl_reply_error();
};
}
route[2] {
#-----------------------------------------------------------------
# REGISTER Message Handler
#----------------------------------------------------------------
if (!search("^Contact: \*") && nat_uac_test("19")) {
setflag(6);
fix_nated_register();
# fix_nated_contact();
force_rport();
};
sl_send_reply("100", "Trying");
# if (!www_authorize("","subscriber")) {
# www_challenge("","0");
# exit;
# };
# if (!check_to()) {
# sl_send_reply("401", "Unauthorized");
# exit;
# };
# consume_credentials();
if (!save("location")) {
sl_reply_error();
};
}
route[3] {
#-----------------------------------------------------------------
# INVITE Message Handler
#-----------------------------------------------------------------
if (nat_uac_test("19")) {
setflag(6);
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
exit;
};
# if (!proxy_authorize("","subscriber")) {
# proxy_challenge("","0");
# break;
# } else if (!check_from()) {
# if(!check_from()) {
# sl_send_reply("403", "Use From=ID");
# exit;
# };
# consume_credentials();
if (isflagset(6)) {
force_rport();
fix_nated_contact();
force_rtp_proxy();
};
t_on_reply("1");
if (!t_relay()) {
if(isflagset(6)) {
unforce_rtp_proxy();
};
sl_reply_error();
};
}
onreply_route[1] {
if (isflagset(6) && (status=~"(180)|(183)|2[0-9][0-9]")) {
if (!search("^Content-Length:\ 0")) {
force_rtp_proxy();
};
}
else if (nat_uac_test("1")) {
fix_nated_contact();
};
}
What's wrong?
your comments are welcome.
Thanks
Serge MESSA
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users