15 Nov
2005
15 Nov
'05
6:44 a.m.
Hi Daryl,
just setting a new domains in domain tables is not enough. You also need
to perform some script changes like:
replace all tests like: uri==myself with is_uri_host_local() and
from==myself with is_from_local().
Please see http://www.openser.org/docs/modules/1.1.x/domain.html
If you still have problems, try to insert log messages (use xlog) in
order to debug and trace your script.
regards,
bogdan
Daryl Sanders wrote:
Hi Everyone,
I just added a second domain to my openser box and screwed things up somehow.
Maybe someone can help figure out what's going on.
I'm using the new onsip config (unmodified except IPs & replacing
breaks w/returns).
I'm using mediaproxy for NAT. Everything worked properly prior to
adding the new domain.
I did add the new domain to the domain table, and have loaded the
domain module with modparams as follows.
modparam("domain", "db_url",
"mysql://openser:mypass@myhost/openser")
modparam("domain", "db_mode", 1)
modparam("domain", "domain_table", "domain")
modparam("domain", "domain_col", "domain")
Existing domain: sip1.mydomain.com
New domain: sip1.mydomain.com
user1: X-Lite (behind NAT)
private-IP (192.168.x.x)
Registers using domain sip1.mydomain.com
user2: Linksys PAP2-NA
public-IP (same subnet as Utsarcom)
Registers using domain sip1.mydomain.com
user3: Utstarcom iAN-02EX
public-IP (63.225.x.x)
Registers using domain sip2.mydomain.com
Here is what happens now...
- All users can register fine.
- user1 & user2 can only receives calls from user3 (can't call others
or pstn , 407 Proxy Auth Required)
- user3 is the only one who can call others (calls to user1,user2, &
pstn are fine)
It's probably just something simple I missed, but I can't seem to
figure it out. As always, thanks for your assistance.
- Daryl
_______________________________________________
Serusers mailing list
Serusers(a)iptel.org
http://mail.iptel.org/mailman/listinfo/serusers