12 Jan
2010
12 Jan
'10
3:09 p.m.
By the way, a short description of record-routing, strict vs loose:
http://sip-router.org/docbook/sip-router/branch/master/sip/sip_introduction…
If you have kamailio 3.0.0 source tree, you find it under doc/sip/
directory as well.
Hope it helps.
Cheers,
Daniel
On 1/12/10 9:04 PM, Daniel-Constantin Mierla wrote:
Hi Julien,
On 1/12/10 8:46 PM, Julien Chavanton wrote:
--
Daniel-Constantin Mierla
* http://www.asipto.com/
I take this as an answer :
"(Route set is filled with Record-Route values of the
INVITE - 200)."
Case closed, sorry but reading RFC about SIP proxy is not always 100%
clear for me, for example there is no ACK in the example.
indeed, Route headers
are built out of Record-Route headers found in
INVITE and 200ok.
Note that Kamailio is doing by default loose routing, you may find
some devices still doing the old specs with strict-routing.
When it is the case of strict routing you find Contact address in last
Route header, otherwise, with loose routing, contact address is in
Request URI and Route headers only with addresses from Record-Route.
If you are involved in a scenario with strict and loose routers, then
it is a bit more complex. However Kamailio deals very well with both
separately or in a mixture.
Cheers,
Daniel
--
Daniel-Constantin Mierla
*http://www.asipto.com/
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users