9 Jan
2007
9 Jan
'07
7:23 a.m.
Hi Daniel,
by using the following code in the failure_route block, i am able to
have a better accounting record for billing. However, i am having one
way audio problem which i believe it is related to NAT. I have tested
forward a call on a UA which is on public ip, which works prefectly.
However, when i tested it with UA which is behind NAT, one way audio
happen when the UA send 302 reply to forward a call..
failure_route[1]
{
end_media_session();
# Handle 302 Redirects
if (t_check_status("302")) {
get_redirects("*");
t_relay();
};
}
Anyone has an idea on how i can fix this?
Regards,
Howard
On 1/9/07, Daniel-Constantin Mierla <daniel(a)voice-system.ro> wrote:
Hello,
when the call A -> B is forwarded to C, then you need to have in your
script:
avp_write("A", "$avp(i:110)");
avp_write("B", "$avp(i:111)");
avp_write("B", "$avp(i:110)");
avp_write("C", "$avp(i:111)");
A, B, C are the SIP addresses of the parties involved in this call.
Cheers,
Daniel
On 01/08/07 23:14, Howard Tang wrote:
Hi,
Did anyone successfully setup call accounting for call forward? I have
been searching for a working example for few days on google, I still
couldn't find any working example.
The config I have at the moment is
modparam("acc", "multi_leg_enabled", 1)
modparam("acc", "src_leg_avp_id", 110)
modparam("acc", "dst_leg_avp_id", 111)
In the main route,
if (!method=="REGISTER" && !method=="NOTIFY") {
avp_write("$from/username", "$avp(i:110)");
avp_write("$ruri/username", "$avp(i:111)");
};
Let say A call B and B forward call to C, the record in the acc table
is all
A to C without B in any one of the record for billing purpose. The
Call forward was set on the UA.
Can anyone give me a hand on this please?