Re: [Serusers] ser/radius accounting not happening

Could you post some examples of start and stop records with the same time ? Jan. On 17-01 08:35, Madan wrote: > Hi List, > I 'am facing a problem with ser/radius configuration which is working

> > here is my ser.cfg > > # > # ----------- global configuration parameters ------------------------ > debug=9 # debug level (cmd line: -dddddddddd) > fork=no > log_stderror=yes # (cmd line: -E) > listen=10.0.0.1 > /* Uncomment these lines to enter debugging mode > debug=7 > fork=no > log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > port=5060 > children=4 > fifo="/tmp/ser_fifo" > > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule "/usr/local/lib/ser/modules/mysql.so" > loadmodule "/usr/local/lib/ser/modules/sl.so" > loadmodule "/usr/local/lib/ser/modules/tm.so" > loadmodule "/usr/local/lib/ser/modules/rr.so" > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > loadmodule "/usr/local/lib/ser/modules/registrar.so" > loadmodule "/usr/local/lib/ser/modules/uri.so" > loadmodule "/usr/local/lib/ser/modules/auth.so" > loadmodule "/usr/local/lib/ser/modules/auth_db.so" > loadmodule "/usr/local/lib/ser/modules/acc.so" > loadmodule "/usr/local/lib/ser/modules/auth_radius.so" > loadmodule "/usr/local/lib/ser/modules/group_radius.so" > > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > > modparam("usrloc", "db_mode", 2) > modparam("auth_radius",

> #modparam("auth_radius", "service_type", 15) > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > modparam("acc", "log_level", 1) > modparam("acc", "radius_flag", 1) > > # ------------------------- request routing logic ------------------- > # main routing logic > > route{ > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if (len_gt( max_len )) { > sl_send_reply("513", "Message too big"); > break; > }; > > > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > # t_relay(); > # break; > # }; > > if (loose_route()) { > > if (method=="BYE" || method=="CANCEL") { > log (1, "BYE or CANCEL\n"); > setflag(1); > }; > > > t_relay(); > break; > }; > > > > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > > if (method=="REGISTER") { > > log(1, "REGISTER: Authenticating user\n"); > > if (!radius_www_authorize("")) { > log(1, "REGISTER: challenging user\n"); > www_challenge("", "0"); > break; > }; > save("location"); > break; > }; > >

> if (uri=~"^sip:44[127][0-9]+@.*$") > { > > if (rewritehostport("10.0.0.8:5060")) > { > if (!t_relay()) > { > sl_reply_error(); > }; > > } > else > { > sl_reply_error (); > }; > break; > > } > else if (method=="INVITE") > { > sl_send_reply("403", "Call cannot be served here"); > > }; > > > # account completed transactions via syslog > setflag(1); > > >