Hi Baris,
Could you please send full Kamailio config file? As I see call is not routed to Freeswitch for some reason. Maybe you don't have following lines in your config:
#!ifdef WITH_FREESWITCH freeswitch.bindip = "192.168.2.131" desc "FreeSWITCH IP Address" freeswitch.bindport = "5090" desc "FreeSWITCH Port"#!endif
Without full Kamailio config file, I doubt that I will be able to help you.
With kind regards,
2016-01-29 14:43 GMT+02:00 Barış Şekerciler baris.sekerciler@outlook.com:
Hello thanks,
Log file in attachment (I added as Terminal Output) so it contains daemon.log and syslog in the same file. You can see the terminal commands with relations.
Here is the log file content: http://paste2.org/AwNINLtm
It was too big and I could not send by mail.
Regards.
On 29 Jan 2016, at 14:25, Jurijs Ivolga jurij.ivo@gmail.com wrote:
Hi Baris,
Standard output means your screen where you putting your commands, like reboot.
http://www.linfo.org/standard_output.html
Kamilio writes logs, when not in debug to syslog, in your case it will be /var/log/syslog or /var/log/messages or anything else like Phil mentioned, but this is when no debug is enabled. When debug is enabled it should appear on your linux shell.
With kind regards,
Jurijs
2016-01-29 14:17 GMT+02:00 Barış Şekerciler baris.sekerciler@outlook.com :
Hi, I checked /var/logs directory for files which has relationship with Kamailio but nothing found.
Is there anything to do in this case?
Regards.
On 29 Jan 2016, at 13:37, Jurijs Ivolga jurij.ivo@gmail.com wrote:
div dir="ltr"> Hi,
Kamilio logs should be in standard output, so basically in console, keep in mind that you need to restart kamailio after updating kamailio.cfg.
With kind regards,
2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerciler@outlook.com
:
Hello Jurjis, I could not reach the Freeswitch DEMO IVR with IP phones which registered at Kamailio Server. I think Kamailio can not route the Freeswitch. Because phone says "Not Found" when I dialed the "455000". And nothing to see except this at fs_cli:
freeswitch@internal> console loglevel 7 +OK log level 7 [7] +OK console log level set to DEBUG
And I added #!define WITH_DEBUG line on Kamailio configuration file. So, where does it write logs?
Regards.
On 29 Jan 2016, at 12:59, Jurijs Ivolga jurij.ivo@gmail.com wrote:
Hi Baris,
On freeswitch: /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next command run into it. console loglevel 7
Then make a call from one extension to another and to 455000(what should be freeswitch demo IVR) Then copy all logs, put in file and send as attachment.
On kamailio server somewhere on top add:
#!define WITH_DEBUG
Now all logs will be in console, so for same call copy logs what you get in console to separate file, attach and send too.
With kind regards,
2016-01-29 12:40 GMT+02:00 Barış Şekerciler < baris.sekerciler@outlook.com>:
Hello again, I authanticated with Kamailio and communicate with IP phones succesfully. But depends on this tutorial: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc When I tried to call "44102" I should go to voicemail box of user 102 but phone says "not found" and I think Kamailio could not route to Freeswitch.
BTW, what kind of logs do you want? Level? How can I send these are?
Regards.
From: baris.sekerciler@outlook.com Date: Fri, 29 Jan 2016 11:37:54 +0200 To: sr-users@lists.sip-router.org Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
Hello Jurjis, thanks for your answer.
I did not try default IVR with Freeswitch. But I will try and write.
Regards.
On 29 Jan 2016, at 11:32, Jurijs Ivolga jurij.ivo@gmail.com wrote:
Hi Baris,
Are you able to dial into Freeswitch default IVR(5000 ext)?
It will helps if you send logs from Kamailio and freeswitch.
With kind regards,
2016-01-29 11:14 GMT+02:00 Barış Şekerciler < baris.sekerciler@outlook.com>:
Thanks for answer Phill. Actually I did not apply any different configuration than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb Jessie repos) After that, I applied these are: http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I adapted to Kamailio 4.3 (at least I tried) There is nothing to different from this link.
So, I work on VmWare. Kamailio Server IP: 192.168.2.98 FreeSwitch Server IP: 192.168.2.131
On 29 Jan 2016, at 10:38, Phil Lavin phil.lavin@synety.com wrote:
You'll need to share your Kamailio config and some details of your network setup (specifically if NAT is involved).
Phil
-----Original Message----- From: sr-users [mailto:sr-users-bounces@lists.sip-router.org sr-users-bounces@lists.sip-router.org] On Behalf Of Baris Sekerciler Sent: 29 January 2016 08:35 To: sr-users@lists.sip-router.org Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
Hello everyone. I'm a student and I'm working on project which about SIP communication and PBXs with IP phones.
So, my first test results were OK with JITSI. But I think I need Freeswitch for working with IP phones. In a word, I need configure an integration Kamailio and Freeswitch.
First, I setup Debian 8.3 Jessie and installed Kamailio on this my local server, after that I installed another Debian 8.3 Jessie (from same image) as my second server and it was going to run Freeswitch on itself. Then I tried to send my communication requests to my Freeswitch server. I made some tests, my Jitsi accounts which are set in Kamailio server were done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I applied exactly the same thing but I did not work. When I tried to reach another IP phone from my IP phone (I registered them) phone always say "NOT FOUND". I'm sure I did my configuration properly.
So, how can I figure it out these things? How can I understand, does Kamailio routes to Freeswitch to my phones?
Best regards. Thanks. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Jurijs ___________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--===============18
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Jurijs _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users