23 Sep
2004
23 Sep
'04
4:15 p.m.
Hi Guys,
Could someone just confirm my question about packet direction? Should it be
that packets go both from and to the phones or just one way?
Many Thanks,
Dave
On Wednesday 22 September 2004 16:09, David Simmons wrote:
Hi,
I have setup a server with the default config and my topology is as
follows:
192.168.10.2 (my PC with SJPhone)
192.168.10.20 (ZyXEL Prestige 2000W)
192.168.10.50 (IPTel SER 0.8.14 src)
Both phones register fine.
When I make a call all packets traverse fine ... phones ring ... I pick up
the phone and no sound.....
I know both phones work as I have had them running through asterisk without
issues.
Here is a tcpdump from my PC:
djs:/home/dave # tcpdump -n net 192.168.10.0/24
tcpdump: listening on eth0
16:07:39.941268 192.168.10.2.5060 > 192.168.10.50.5060: udp 625 (DF)
16:07:39.942286 192.168.10.50.5060 > 192.168.10.2.5060: udp 583 (DF) [tos
0x10] 16:07:42.347992 192.168.10.50.5060 > 192.168.10.2.5060: udp 481 (DF)
[tos 0x10] 16:07:43.157053 192.168.10.50.5060 > 192.168.10.2.5060: udp 481
(DF) [tos 0x10] 16:07:44.933756 arp who-has 192.168.10.2 tell 192.168.10.50
16:07:44.933787 arp reply 192.168.10.2 is-at 0:50:fc:72:48:a7
16:07:51.478977 192.168.10.50.5060 > 192.168.10.2.5060: udp 728 (DF) [tos
0x10] 16:07:51.483097 192.168.10.2.5060 > 192.168.10.50.5060: udp 493 (DF)
16:07:51.617704 arp who-has 192.168.10.2 tell 192.168.10.20
16:07:51.617742 arp reply 192.168.10.2 is-at 0:50:fc:72:48:a7
16:07:51.624504 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.649217 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.664914 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.696964 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.728381 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.760793 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.792979 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.824425 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.857219 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.889120 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.904975 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.937186 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:51.968744 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:52.000985 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:52.032817 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
16:07:52.064412 192.168.10.20.2070 > 192.168.10.2.16390: udp 252
No matter which phone I make the call from packets only go like above from
the ZyXEL to the SJPhone PC.
Am I right in thinking that packets should go both ways??
Any other ideas as to why I have no sound?
Pulling my hair out on this one :)
Cheers,
Dave
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers