Re: [SR-Users] Cisco 79XX Series Phones and TLS integration with kamailio

Hi Jon, In terms or software version for the Cisco, we use SIP45.9-3-1SR4-1S, this being for 7945,7965,7940,7941,7961. All seem to work ok with kamailio version 4.x Jon From: john.murray(a)skyracktelecom.com To: sr-users(a)lists.sip-router.org Date: Thu, 19 Jun 2014 10:58:10 +0100 Subject: Re: [SR-Users] Cisco 79XX Series Phones and TLS integration with kamailio Jon hi, Which software version/image do you find works best for this?We found some later versions to have introduced more problems. Regards John From: sr-users-bounces(a)lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Jonathan Hunter Sent: 19 June 2014 10:48 To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] Cisco 79XX Series Phones and TLS integration with kamailio Hi Mark, Sure of course, they are some what painful to get working due to their asymmetric NAT behaviour. What handset models are you working with, and what firewall devices do you have on site, as I have them working with a Cisco ASA on the network edge. Then I can give you some more details on at least them trying to register to kamailio. Thanks JonFrom: mark(a)darkorigins.com Date: Thu, 19 Jun 2014 10:37:42 +0100 To: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Cisco 79XX Series Phones and TLS integration with kamailio Hi Jon It sounds like you’re a few steps in front of me. I’m just starting to try and get a working set of config files etc for provisioning to the phones. Which at the moment is going through the motions of registering but not actually sending anything. Would you mind sharing your experiences so far? Thanks Mark On 19 Jun 2014, at 09:50, Jonathan Hunter <hunterj91(a)hotmail.com> wrote: Hi All, As you guys might remember I have been doing alot of work with these legacy handsets recently, in particular the Cisco IP phones 7945G and 7965G. They work well now with kamailio, using UDP or TCP as the transport protocol. I am now looking to implement SIP over TLS with them, and wondered if anyone had completed the same, as it appears they were designed very much to support SIP over TLS and SRTP but with Cisco call manager and not other SIP devices. I am trying to understand if its possible to integrate with kamailio, as from Cisco documentation it appears a CTL file (client trust list) is required which seems to be generated by cisco software, and the handset needs it before it will try to initiate a SIP connection over TLS. I have implemented TLS /SRTP with Cisco SPA's, Bria etc on kamailio fine, so its more a question around the handset and if anyone has achieved this. Thanks Jon_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users