2 Feb
2006
2 Feb
'06
9:58 a.m.
Thanks Andrei for the clear answer... I might stick with the UDP then.
It seems clear that it would be better choice to use UDP for clients. I'm
just wondering, since I've understood that TCP is sort of recommenend
transport for SIP, but would this only be the case in the perfect world
where no NATs exists and no persistent connections would be needed?
- Teemu
2006/2/1, Andrei Pelinescu-Onciul <andrei(a)iptel.org>rg>:
On Feb 01, 2006 at 09:20, Teemu Harju <teemu.harju(a)gmail.com> wrote:
--
Teemu Harju
http://www.teemuharju.net
Hi,
This is a question that has been bugging me for some time now. If I use
SER
and the clients connected to it use only TCP,
will there be a problem
with
the number of sockets that can be open at the
same time, if these
clients
are behind NAT? I mean that for NAT bindings to
stay open, each client
has
to keep open TCP connection to SER all the time
after registration. What
is
the maximum number of open sockets that Linux can
handle at the same
time?
First of all if you can, use UDP. tcp is more resource demanding (CPU
wasted looking for the Content-Length, CPU wasted snychronizing writes
to reuse the same connection, file descriptors and kernel tcp memory
wasted to keep all the connections) and more DOS-prone (it's much easier
to
use tcp to try to DOS your sip server).
If you have to use tcp, then if you use ser 0.9.x, it cannot handle more
then 1024 connections (in fact it's a little less then 1024).
I've changed the maximum number of open files to 65535 (ulimit -n
65535).
Doesn't this also mean the maximum number of
sockets? Is this the
absolute
maximum? Also, does this mean the maximum number
of clients that can
connect
to my proxy?
No, it's not that easy :-)
You would need to use ser unstable (CVS HEAD), set
tcp_max_connections=65535, start ser with a lot of shared memory
and/or decrease TCP_BUF_SIZE to something smaller (e.g. 10k) and
recompile ser.
You should also watch for /proc/sys/fs/file-max (should be >=65535).
If you have lots of disconnects (clients closing connections) you might
also want to enable /proc/sys/net/ipv4/tcp_tw_recycle.
I was able to open 50K connections on the same machine (and if you have
lots of RAM you could go further).
Andrei
P.S.: if you want to use unstable, then better wait a few weeks, I'm
currently working on the tcp code