Sorry, i ran the older version of openser not the new. :-) thx
-----Original Message----- From: Pletli Antal Sent: Friday, August 04, 2006 8:45 AM To: users@openser.org Subject: RE: [Users] Two c= tags in sdp body
Hi,
It doesn't work, with the 'c' flag all the c= tags remain unchanged.
-----Original Message----- From: Ovidiu Sas [mailto:sip.nslu@gmail.com] Sent: Thursday, August 03, 2006 5:00 PM To: Pletli Antal Cc: users@openser.org Subject: Re: [Users] Two c= tag in sdp body
Check the new 'c' flag in 1.1 release: http://www.openser.org/docs/modules/1.1.x/nathelper.html#AEN275
-ovi
On 8/3/06, Pletli Antal a.pletli@euromacc.hu wrote:
Hello,
I use OpenSer with Cisco AS5300/5350/5400 with IOS 12.3. When Cisco sends an OK 200 SIP message to OpenSer, there are two "c=IN
IPV4"
tags in sdp body with the same IP address. The nathelper module only replaces the last occurence of c= tag so some SIP clients works wrong because those get the first IP from the
first "c="
tag...
How can i replace the all occurences of "c=" tag in sdp body with the help of nathelper?
Thx,
Antal
Content-Type: application/sdp. Content-Length: 277. . v=0. o=CiscoSystemsSIP-GW-UserAgent 7144 773 IN IP4 213.253.220.242. s=SIP Call. c=IN IP4 213.253.xxx.xxx. -> this is the original address of Cisco GW
t=0 0. m=audio 35944 RTP/AVP 18. c=IN IP4 213.253.xxx.yyy. -> this is the nated address replaced
by
nathelper a=rtpmap:18 G729/8000. a=fmtp:18 annexb=no. m=video 35946 RTP/AVP. c=IN IP4 213.253.220.253. a=nortpproxy:yes. _______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users