30 Nov
2011
30 Nov
'11
11:59 a.m.
Now I understood why the messagem is forward with UDP protocol... This
problem occurs with bria on android plataform, this softphone send the
INVITE request with tls protocol specified only on the contact header.
Contact: "XXX" <sip:XXX@YYY.YYY.YYY.YYY:YYY;transport=TLS>.
as Daniel pointed out, "The contact header address is not used for routing
SIP requests, only Route headers and R-URI addresses"
In this case, I should add the transport protocol TLS on R-URI before to
forward message with t_relay function... Correct?
Cheers
2011/11/29 Daniel-Constantin Mierla <miconda(a)gmail.com>
On 11/29/11 6:24 PM, Bruno Bresciani wrote:
Thank's for attention Andrew
I'm reading the source code of tm module to try understand better this
behavior...
I can't understand what meaning that "the outbound proxy address is
set"... where I define this address?
Outbound proxy address is stored in an internal structure, it is not part
of a SIP request. It represents the address where to send the request,
regardless of request URI (r-uri) address. One common use case is when
dealing with NAT routers, the r-uri is set to the contact address of the
destination phone and the outbound proxy address is set to the NAT router.
From configuration file, you can access it via $du (read and write via
assignment operation). There are couple of modules that may set the
outbound proxy address, like registrar/usrloc, rr, lcr...
Maybe the best is to post here an ngrep with the SIP trace of such case,
that we can see if something is wrong.
Cheers,
Daniel
2011/11/29 Andrew Pogrebennyk <apogrebennyk(a)sipwise.com>
Bruno,
the address from contact header is put into R-URI on outgoing request to
that user. This is where I catch that parameter. I think we should debug
why kamailio sends the request using UDP, it is not clear, as Daniel
pointed out it should work automatically. I think I had to do these
manipulations because in my case the outbound proxy address is set
On 11/29/2011 05:38 PM, Bruno Bresciani wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin:
http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
In my case the transport=TLS is present in
contact header, has the same
treatment of R-URI?
Cheers
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users