Re: [SR-Users] Sending to an announcement server from a failure_route

Hi list, I'm trying to play an announcement for my users when my PSTN gateway responds with a 404 Not Found (Reason: Q.850;cause=3), indicating a wrong number. I'm a bit lost and would appreciate any advice. What I am seeing is two parallel SIP invites, one to my announcement server (hooray!) and one to the PSTN gateway again (which I don't want). How do I stop the original branch from starting again? I've tried changing the order of rewritehostport and append_branch without any difference. I've also tried to use t_relay() instead of the RELAY route. I'm using Kamailio 5.1 and have modified the deafult kamailio.cfg Thanks! Boden I think this is the relevant parts of the config: # PSTN GW routing route[PSTN] { [PSTN regex logic omitted] # classify as an outbound call set_dlg_profile("outbound_calls"); # select a PSTN gateway from the dispatcher if (!ds_select_dst("66", "8")) { send_reply("404", "No destination"); exit; } # failover if the selected PSTN gateway is down t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } # Try next destinations in failure route failure_route[RTF_DISPATCH] { xlog("inside RTF_DISPATCH"); if (t_is_canceled()) { exit; } # wrong number from PSTN if (t_check_status("404")) { append_branch(); append_hf("X-Application: announcement\r\n"); append_hf("X-Announcement-Playback: wrong-number\r\n"); route(TO_ANNOUNCEMENT); exit; } # next DST - only for 500 or local timeout if (t_check_status("500") or (t_branch_timeout() and !t_branch_replied())) { xlog("selecting next destination"); if (ds_next_dst()) { t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } } } # Routing to announcement server route[TO_ANNOUNCEMENT] { if (!is_method("INVITE")) { return; } rewritehostport('ANNOUNCEMENT_SERVER:5060'); route(RELAY); exit; } _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users