Hi All,
I'd really appreciate any help from you guys. Below is my ser.cfg, when I start the daemon on debugging mode....port 5060 opens up but starting ser doesn't say it's [OK]. it just stopped pls see below.
[root@nj modules]# /etc/rc.d/init.d/ser restart Stopping ser: [FAILED] Starting ser:
When I start it not on debugging mode, it says starting ser [OK], even on the message log it says that startup of ser suceeded but when I do a netstat, I don't see the 5060 open.
Also, I have two SIP phones, I created two subscriber 1001 and 1002, I tried to test it when 5060 is open on my sip server, but I always get the busy line. And on one of the phones, the screen shows 404.
here is my ser.cfg, hope you can guys help me out, TIA
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
#/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes #*/
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" listen=192.168.0.2 listen=127.0.0.1 alias="silverbackasp.com" # ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=="silverbackasp.com") {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication if (!www_authorize ("silverbackasp.com", "subscriber")) { www_challenge("silverbackasp.com", "0"); break; };
save("location"); break; };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
}