Have you configured your Radius servers correctly? (in radiusclient.cconf)
klaus
Rosa De Santis wrote:
Hi Jan.
I put the acc_rad_request("text") and the setflag(1) in the route section and now I receive a warn message in syslog: rc_send_server: no reply from RADIUS server unknown: 1646. I still don't have any package out of port 1813, but i find packages trying to go out port 1646.
Do you know why is this happening? Please help...
Rosa.
From: Jan Janak jan@iptel.org To: Rosa De Santis rosadesantis@hotmail.com CC: Subject: Re: [Serusers] Radius accounting Date: Sat, 19 Nov 2005 00:16:08 +0100
Only if a transaction has been created. REGISTERs, for example, do not create transactions.
Try to add acc_rad_request("text"); right after setflag(1). This should log any request.
Jan.
On 18-11-2005 22:27, Rosa De Santis wrote:
Hi again Jan.
The way I have the setflag command does not register all messages for accounting? I mean: register, invite, bye, etc ?
Thanks Rosa.
From: Jan Janak jan@iptel.org To: Rosa De Santis rosadesantis@hotmail.com CC: > >Subject: Re: [Serusers] Radius accounting Date: Fri, 18 Nov 2005 23:08:16 +0100
Yes, this is what I meant. Could you also post dumps of SIP
traffic that
should have been accounted ?
Jan.
On 18-11-2005 21:50, Rosa De Santis wrote:
Hello. Thanks for your help.
This is my ser.cfg. I set log_flag, log_level and radius_flag to 1, and I don't get
anything
in
syslog. This is what you mean?
Thanks again. Rosa.
debug = 9 fork=no log_stderror=yes
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
modparam("usrloc", "db_mode", 2) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "radius_missed_flag", 2) modparam("acc", "radius_flag", 1) modparam("acc", "service_type", 15) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf")
route{
if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; setflag(1); if (!method=="REGISTER") record_route(); if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; if (uri==myself) { if (method=="REGISTER") { if (!radius_www_authorize("")) { www_challenge("", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1);}
route[1] { if (!t_relay()) { sl_reply_error(); }; }
>From: Jan Janak jan@iptel.org >To: Rosa De Santis rosadesantis@hotmail.com >CC: serusers@lists.iptel.org >Subject: Re: [Serusers] Radius accounting >Date: Fri, 18 Nov 2005 21:16:22 +0100 > >Did you mark the transaction with correct flag ? Try to
configure both
>syslog and radius accounting with the same flag and see if you
get any
>accounting records in syslog. > > Jan. > >On 18-11-2005 20:04, Rosa De Santis wrote: >> Yes, I set the server IP in authserver and acctserver in the >> radiusclient.conf file in the radiusclient-ng folder. >> I also added the server and secret in the servers file in the
same
>folder. >> The strange thing is that i'm making authorization to the
same Radius
>> server, why accounting is not working? >> >> Thanks >> Rosa. >> >> >> >From: Jan Janak jan@iptel.org >> >To: Rosa De Santis rosadesantis@hotmail.com >> >CC: serusers@lists.iptel.org >> >Subject: Re: [Serusers] Radius accounting >> >Date: Fri, 18 Nov 2005 21:04:26 +0100 >> > >> >Did you configure the accounting server in the configuration
file of
>> >radiusclient-ng ? >> > >> >Do you have correct secret for the server ? >> > >> > Jan. >> > >> >On 18-11-2005 18:25, Rosa De Santis wrote: >> >> Hello all. >> >> >> >> Please, I am trying to make Radius authorization and
accounting
using
>> >SER >> >> 0.9.3 and radiusclient-ng. I already set all the
configuration as
the
>> >> ser_radius HowTo. >> >> Now, I'm making Radius authorization successfully, but not >accounting, I >> >> don't get anything going out through port 1813. >> >> >> >> The Radius Server is in another machine, i'm configuring
only the
>radius >> >> client. >> >> Is there other things to do besides the ser_radius howto?
Please
>help... >> >> >> >> Thanks a lot >> >> Rosa. >> >> >> >> >> >> _______________________________________________ >> >> Serusers mailing list >> >> serusers@lists.iptel.org >> >> http://lists.iptel.org/mailman/listinfo/serusers >> >> >> _______________________________________________ >> Serusers mailing list >> serusers@lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers