24 Aug
2009
24 Aug
'09
10:45 a.m.
On 24.08.2009 9:49 Uhr, aiphie wrote:
hi,all
I have use sed command to clear the comment which in front of regarding nat,But
it's always use local network IP to fill session description protocol->connection
information->connection address,I know sip server can rewrite this message item,Can you
tell me how to let sip server rewrite it?
annex is my config file,please look what wrong in this?
have you read my previous email entirely? There was something about
rtpproxy that may lead you to discover what is wrong.
Cheers,
Daniel
thank you!
--aiphie
----- Original Message -----
From: "Daniel-Constantin Mierla" <miconda(a)gmail.com>
To: "aiphie" <chengwu8(a)139.com>
Cc: <users(a)lists.kamailio.org>
Sent: Friday, August 21, 2009 6:55 PM
Subject: Re: [Kamailio-Users] sip phone behind the nat
--
Daniel-Constantin Mierla
* http://www.asipto.com/
Hello,
On 21.08.2009 12:52 Uhr, aiphie wrote:
------------------------------------------------------------------------
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users Hi,body.
I'm using the kamailio as a sip server,If in the local network ,It
works very well ,But when i set the sip server in the internet, When
starting voice chat,Two sip phone will receive the behind net ip
address(sip phone's local ip address).
How i can configure sip server(kamailio) let sip server send sip
phone's peer ip address using front nat ip address(internet ip address)?
Any body can give me how to realize it?
you need to enable nathelper module + appropriate lines in config file
and install rtpptoxy.
If you check the default config file you will see at the top some
comments regarding nat traversal and what sed command you can use to
enable it.
Cheers,
Daniel
--
Daniel-Constantin Mierla
* http://www.asipto.com/