Re: [SR-Users] help with kamailio rpm made from source

I made loadmodule and modparam("debugger", "cfgtrace", 1) but anyway - no logs when I register. As I understand - it's like no config file. On Thursday, September 15, 2016 6:01 PM, Daniel-Constantin Mierla <miconda(a)gmail.com> wrote: I am not familiar with kazoo configs, maybe asking on their mailing list can help you more. From Kamailio point of view, you can load debugger module and set its cfgtrace parameter to 1, then see what actions from config are executed and why is not getting to the authentication part. Cheers, Daniel On 15/09/16 14:09, Dmitry wrote: /etc/kazoo/kamailio/default.cfg - which containes all routes. 2600hz/kazoo-configs | | | | | | | | | | | 2600hz/kazoo-configs kazoo-configs - Kazoo Configuration Files for Software We Use | | | | I test on a working server (testing one) and a working config On Thursday, September 15, 2016 3:56 PM, Daniel-Constantin Mierla <miconda(a)gmail.com> wrote: Are you using default kamailio.cfg or another one? Cheers, Daniel On 15/09/16 12:39, Dmitry wrote: Hello I took this spec from suse. It generates no errors. When I installed from the RPM I had made - the phone register, but The phone sends a REGISTER and the KAmailio sends 200ok back to the phone (so no NONCE authorization) and no logs during it. In default.cfg I set L_DBG but no logs are generated during registering a phone. And I see no AMQP messages (I set to 1 Kazoo_enable in the SPEC file). Why there are no logs during register (I saw register in tcpdump)? On Wednesday, September 14, 2016 7:42 PM, Daniel-Constantin Mierla <miconda(a)gmail.com> wrote: Then you just need add those files in various packages inside the spec file, so they are not detected to be orphaned. Maybe you can inspire from:   - https://build.opensuse.org/package/view_file/home:kamailio:v4.3.x-rpms/kama… Cheers, Daniel On 14/09/16 16:35, Dmitry wrote: 4.3.4 version is for Kazoo It is on production server currently. I need to rebuild the current RPM so as to apply patches. But first I want to get a working Kamailio and only after it I will apply the patches. I think I may take a list of modules from the production Kazoo-kamailio and rearchive the tar.gz because now the Fedora 18 rpmbuild gives a lot of files: RPM build errors:     Installed (but unpackaged) file(s) found:   /usr/lib64/kamailio/modules/auth_xkeys.so   /usr/lib64/kamailio/modules/dmq_usrloc.so   /usr/lib64/kamailio/modules/ims_charging.so   /usr/lib64/kamailio/modules/jsonrpc-s.so   /usr/lib64/kamailio/modules/mohqueue.so   /usr/lib64/kamailio/modules/nosip.so   /usr/lib64/kamailio/modules/rtjson.so   /usr/lib64/kamailio/modules/rtpengine.so   /usr/lib64/kamailio/modules/statsd.so   /usr/lib64/kamailio/modules/tcpops.so   /usr/lib64/kamailio/modules/tsilo.so   /usr/share/doc/kamailio/modules/README.auth_xkeys   /usr/share/doc/kamailio/modules/README.dmq_usrloc   /usr/share/doc/kamailio/modules/README.ims_charging   /usr/share/doc/kamailio/modules/README.ims_registrar_scscf   /usr/share/doc/kamailio/modules/README.jsonrpc-s   /usr/share/doc/kamailio/modules/README.mohqueue   /usr/share/doc/kamailio/modules/README.nosip   /usr/share/doc/kamailio/modules/README.rtjson   /usr/share/doc/kamailio/modules/README.rtpengine   /usr/share/doc/kamailio/modules/README.statsd   /usr/share/doc/kamailio/modules/README.tcpops   /usr/share/doc/kamailio/modules/README.tsilo   /usr/share/snmp/mibs/KAMAILIO-MIB   /usr/share/snmp/mibs/KAMAILIO-REG-MIB   /usr/share/snmp/mibs/KAMAILIO-SIP-COMMON-MIB   /usr/share/snmp/mibs/KAMAILIO-SIP-SERVER-MIB   /usr/share/snmp/mibs/KAMAILIO-TC On Wednesday, September 14, 2016 5:05 PM, Daniel-Constantin Mierla <miconda(a)gmail.com> wrote: Hello, any reason not to use series 4.4.x? Iirc, the latest spec that got update on 4.4 are those for oracle enterprise linux, perhaps is something that you can reuse a lot for upgrading to the centos flavour. On the other hand, you can use opensuse build service if you want to build yourself, the spec from the kamailio project there is up to date and the ones for 4.3 should still be there. Anyhow, as I said, I would recommend to go with 4.4.x version. Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com - http://www.kamailio.org http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda -- Daniel-Constantin Mierla http://www.asipto.com - http://www.kamailio.org http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda