Re: [Serhelp] Re: [Serusers] Problem with Radius Auth, any hint?

Hi Jan, Already gone through this, did exactly the same, radiusclient is installed n configured, While m geting an error in debug of ser, that is 15(26965) check_nonce(): comparing [3f7e23177ff358f48050c11e7540943971b73f02] and [3f7e23177ff358f48050c11e7540943971b73f02] 15(26965) authorize(): Credentials realm and URI host do not match 15(26965) build_auth_hf(): 'WWW-Authenticate: Digest realm="cooking.com.pk", nonce="3f7e23177ff358f48050c11e7540943971b73f02" While ser conf is fine enough, pasted below. alias="cooking.com.pk" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") modparam("auth_radius", "service_type", 15) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops....:("); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"voice.cooking.com.pk") { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("cooking.com.pk")) { www_challenge("cooking.com.pk", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found....!!!"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Seems some minor mistake.., As no request is being sent to radius, ngrep shows nothing for that.... JF Jan Janak wrote: See http://iptel.org/ser/ser_radius.html Jan. On 03-10 03:47, John Foster wrote: --------------------------------- Do you Yahoo!? The New Yahoo! Shopping - with improved product search