20 Apr
2005
20 Apr
'05
7:56 p.m.
One more which came into my mind and has been reported to block is syslog.
At 07:39 PM 4/20/2005, Ricardo Martinez wrote:
Thanks Jiri.
I remember have been checked the typical services when the problem was
happening.
My Radius (i'm not use mysql) for example was working without problems...
How can i log information of SER failures?
nagios/sipsak is an option.
-jiri
Regards,
Ricardo.-
--
Jiri Kuthan http://iptel.org/~jiri/
-----Mensaje original-----
De: Jiri Kuthan [mailto:jiri@iptel.org]
Enviado el: Miércoles, 20 de Abril de 2005 13:12
Para: Ricardo Martinez; 'serusers(a)lists.iptel.org'
Asunto: Re: [Serusers] Serious Problems with SER - Not responding
anything.
a typical reason is SER is blocked waiting for some external service.
It may be possibly unavailable mysql, DNS, or RADIUS...
-jiri
At 07:09 PM 4/20/2005, Ricardo Martinez wrote:
www_challenge("sip.mydomain.com", "1");
www_challenge("sip2.mydomain.net", "1");
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers Hello list.
I'm experiencing problems with my SER. As i
mentioned in a past
post
(http://lists.iptel.org/pipermail/serusers/2005-April/018324.html),
from time to time (it is getting pretty often) my
SER not
answering any
request, when a REGISTER reach the server it is
not
challenged, this happens
too with the INVITE's messages. About two
hours ago this
happened again.
I asked in my last post how to LOG the internal
errors or
messages from SER
to see if i can get some idea about what's
going on, but i
have no answer
about it.
This is the infornmation i was able to capture when this was
happening :
the serctl moni command shows a lot of "failures".
[cycle #: 11; if constant make sure server lives and fifo is on]
Server: Sip EXpress router (0.8.14-3 (i386/linux))
Now: Wed Apr 20 12:56:29 2005
Up Since: Thu Apr 14 21:32:18 2005
Up time: 487451 [sec]
Transaction Statistics
Current: 6 (2612 waiting) Total: 38194 (0 local)
Replied localy: 80752
Completion status 6xx: 4643, 5xx: 768, 4xx: 10664, 3xx:
0,2xx: 22552
Stateless Server Statistics
200: 5975004 202: 0 2xx: 0
300: 0 301: 0 302: 0 3xx: 0
400: 0 401: 205980 403: 0 404: 0 407: 22918 408: 0 483: 0
4xx: 19
500: 0 5xx: 0
6xx: 0
xxx: 0
failures: 24180
UsrLoc Stats
Domain Registered Expired
'location' 219 4552
--------------------------------------------------------------
[cycle #: 5; if constant make sure server lives and fifo is on]
Server: Sip EXpress router (0.8.14-3 (i386/linux))
Now: Wed Apr 20 12:56:47 2005
Up Since: Thu Apr 14 21:32:18 2005
Up time: 487469 [sec]
Transaction Statistics
Current: 4 (2619 waiting) Total: 38219 (0 local)
Replied localy: 80762
Completion status 6xx: 4643, 5xx: 770, 4xx: 10667, 3xx:
0,2xx: 22552
Stateless Server Statistics
200: 5975030 202: 0 2xx: 0
300: 0 301: 0 302: 0 3xx: 0
400: 0 401: 205995 403: 0 404: 0 407: 22922 408: 0 483: 0
4xx: 19
500: 0 5xx: 0
6xx: 0
xxx: 0
failures: 24380
UsrLoc Stats
Domain Registered Expired
'location' 220 4552
-----------------------------------------------------------------
[cycle #: 2; if constant make sure server lives and fifo is on]
Server: Sip EXpress router (0.8.14-3 (i386/linux))
Now: Wed Apr 20 12:56:52 2005
Up Since: Thu Apr 14 21:32:18 2005
Up time: 487474 [sec]
Transaction Statistics
Current: 4 (2620 waiting) Total: 38224 (0 local)
Replied localy: 80762
Completion status 6xx: 4643, 5xx: 770, 4xx: 10667, 3xx:
0,2xx: 22552
Stateless Server Statistics
200: 5975034 202: 0 2xx: 0
300: 0 301: 0 302: 0 3xx: 0
400: 0 401: 206000 403: 0 404: 0 407: 22923 408: 0 483: 0
4xx: 19
500: 0 5xx: 0
6xx: 0
xxx: 0
failures: 24445
UsrLoc Stats
Domain Registered Expired
'location' 215 4557
What is happening to cause the "failures" counter grows that much?.
The free command shows this :
[root@root]# free
total used free shared
buffers cached
Mem: 1030888 626464 404424
0
86692 369848
-/+ buffers/cache: 169924 860964
Swap: 2040244 4864 2035380
The top command shows not much use of CPU. The proccess
were running (the
SER and mediaproxy)
Despite of all this, the SER was not answering anything.
Could this be a bug? or maybe a problem with my ser.cfg file?. I'm
attaching my ser.cfg file too to see if someone can tell me
if there is
something wrong about it.
I really hope that someone could help me, this is getting
really complicated
every time it happens.
Thanks
Ricardo Martinez.-
**************************************************
SER.CFG
**************************************************
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
++++++++++++++++++++++++++++++
# ----------- global configuration parameters
------------------------
debug=0 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=yes # (cmd line: -E)
#Uncomment these lines to enter debugging mode
#fork=no
#log_stderror=yes
listen=ip.of.my.ser
alias=sip.mydomain.com
alias=sip2.mydomain.net
alias=ip.of.my.ser
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
#children=4
fifo="/tmp/ser_fifo"
fifo_mode=0666
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "/usr/local//lib/ser/modules/mysql.so"
loadmodule "/usr/local//lib/ser/modules/sl.so"
loadmodule "/usr/local//lib/ser/modules/tm.so"
loadmodule "/usr/local//lib/ser/modules/rr.so"
loadmodule "/usr/local//lib/ser/modules/maxfwd.so"
loadmodule "/usr/local//lib/ser/modules/usrloc.so"
loadmodule "/usr/local//lib/ser/modules/registrar.so"
loadmodule "/usr/local//lib/ser/modules/textops.so"
loadmodule "/usr/local//lib/ser/modules/exec.so"
# ++++++++++ Para trabajar con NAT
loadmodule "/usr/local//lib/ser/modules/mediaproxy.so"
loadmodule "/usr/local//lib/ser/modules/domain.so"
loadmodule "/usr/local//lib/ser/modules/dbtext.so"
loadmodule "/usr/local//lib/ser/modules/nathelper.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
# ++++++++++ Modulos de Accounting y Autorizacion via Radius
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
loadmodule "/usr/local/lib/ser/modules/group_radius.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
# ----------------- setting module-specific parameters
---------------
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# +++++ module authorization
modparam("auth_radius","radius_config","/usr/local/etc/radius
client/radiuscl
ient.conf")
modparam("auth_radius","service_type",15)
# +++++ module accounting
modparam("acc","radius_config","/usr/local/etc/radiusclient/r
adiusclient.con
f")
modparam("acc","log_level",1)
modparam("acc", "service_type", 15)
modparam("acc", "radius_flag", 1)
modparam("acc", "radius_missed_flag", 3)
modparam("acc", "failed_transactions", 1)
modparam("acc", "report_ack", 0)
# +++++ group radius
modparam("group_radius","radius_config","/usr/local/etc/radiu
sclient/radiusc
lient.conf")
modparam("group_radius", "use_domain", 1)
# +++++ module mediaproxy
modparam("mediaproxy", "natping_interval", 60)
modparam("mediaproxy", "mediaproxy_socket",
"/var/run/mediaproxy.sock")
#modparam("mediaproxy",
"sip_asymmetrics",
"/usr/local/etc/ser/sip-asymmetrics-clients")
#modparam("mediaproxy", "rtp_asymmetrics",
"/usr/local/etc/ser/rtp-asymmetrics-clients")
modparam("registrar", "nat_flag", 5)
# +++++ module domain
modparam("domain", "db_url",
"/usr/local/etc/ser/domaintables")
modparam("domain", "domain_table", "domain")
modparam("domain", "domain_col", "domain")
# +++++ module tm
modparam("tm", "fr_timer", 15)
modparam("tm", "fr_inv_timer", 22)
modparam("tm", "wt_timer", 5)
# +++++ module registrar (Con estos parametro haces que el
location lookup
priorize solo los mas recientes contacts)
modparam("registrar", "append_branches", 0)
modparam("registrar", "desc_time_order", 1)
# ------------------------- request routing logic
-------------------
# main routing logic
route {
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++
# Llamada a Rutina Externa
"translate" para cambio de numero
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++
if (method=="INVITE" || method=="CANCEL") {
exec_dset("/usr/local/etc/ser/translate");
};
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++
# Initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
# Marcamos todos los mensajes para que
pasen por
nuestro servidor
# a traves del record route.
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
record_route();
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
# Permitimos el uso del campo Route en el
ruteo de la llamada
#
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
if (method=="BYE" || method=="CANCEL") {
log(1, "NAT: BYE o CANCEL recibido -->
terminando la
sesion
de media\n");
end_media_session();
setflag(1);
};
if (loose_route()) {
t_relay();
break;
};
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+
# Manejo de los mensajes NOTIFY para Keep Alive de NAT
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+
if ((method=="NOTIFY") && search("^Event:
keep-alive")) {
sl_send_reply("200", "OK");
break;
};
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+
# Marcamos las llamadas para accounting
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+
setflag(1);
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+
# Test para clientes NATeados
#
# 1 : Chequea si el cliente tiene IP privada en el
campo Contact.
# 2 : Chequea si el cliente se contacto
con una IP
distinta a la del
campo VIA.
# 3 : Chequea si el cliente tiene IP privada en el
ultimo campo VIA.
#
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+
if (client_nat_test("3")) {
log(1, "NAT: Requerimiento de IP privada -->
fixed
contact
(en rutina principal)\n");
setflag(5);
force_rport();
if (method=="REGISTER") {
fix_nated_contact();
} else {
fix_contact();
};
append_hf("P-hint: fixed NAT contact for
request\r\n");
};
if (uri==myself) {
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++
# Chequeo de REGISTRO para equipos
del dominio 1
# Dominio Voiss : sip.mydomain.com
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++
if (method=="REGISTER" &&
uri=~"^sip:.*sip.mydomain.com") {
# Challenge/Response
if (
!radius_www_authorize("sip.mydomain.com"))
{
break;
};
# Mandamos un mensaje de Log si es
que un cliente
NATEADO se registro.
if (isflagset(5)) {
log(1, "NAT: Cliente
NAT'eado registrado
(dentro del chequeo de REGISTER)\n");
};
save("location");
break;
}; # Fin chequeo de Registro para Dominio :
sip.mydomain.com
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++
# Chequeo de REGISTRO para equipos
del dominio 2
# Dominio Mayoristas : sip2.mydomain.net
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++
if (method=="REGISTER" &&
uri=~"^sip:.*sip2.mydomain.net") {
# Challenge/Response
if (
!radius_www_authorize("sip2.mydomain.net"))
{
break;
};
# Mandamos un mensaje de Log si es
que un cliente
NATEADO se registro.
if (isflagset(5)) {
log(1, "NAT: Cliente
NAT'eado registrado
>(dentro del chequeo de REGISTER)\n");
> };
>
> save("location");
> break;
> }; # Fin chequeo de Registro para Dominio :
>sip2.mydomain.net
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
++
# CHEQUEO DEL INVITE PARA TODAS LAS LLAMADAS
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
++
if (method=="INVITE" && src_ip!=xx.xx.xx.xx) {
if ( !radius_proxy_authorize("")) {
proxy_challenge("", "1");
log (1, "LOG: Llamada no
AUTORIZADA\n");
> break;
> };
> };
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
++++++++++
# Llamadas hacia dominio H.323
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
++++++++++
if ( (uri=~"^sip:717.*@.*") |
(uri=~"^sip:707.*@.*") |
>(uri=~"^sip:777.*@.*") | (uri=~"^sip:333.*@.*") |
(uri=~"^sip
>:0.*@.*") ){
> log(1,"FORWARDING : Llamada hacia plataforma
>H.323\n");
> route(1);
> break;
> };
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
++++++++
# Llamadas SIP locales
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
>++++++++
>
> if (!lookup("location")) { #Usuarios que no estan en
>"location" database.
> route(4);
> break;
> };
>
>
> setflag(3);
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
++++++++
# Manejo para llamadas NAT'das
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
++++++++
if (method=="INVITE") {
log(1, "ROUTING: Reply processing
(online user)
enabled to handle NAT'd resonses\n");
t_on_reply("1");
if ( (isflagset(5)) &&
(method=="INVITE" ||
method=="ACK") ) {
log(1, "NAT: Invite
received -->
enabling media proxy (else del lookup 2do
if)\n");
use_media_proxy();
append_hf("P-hint:
request forced to
media proxy\r\n");
};
};
# Do it ? (Ricardo Martinez)
};
append_hf("P-hint: USRLOC\r\n");
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+++++
# Efectuamos la llamada
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+++++
if (!t_relay()) {
sl_reply_error();
break;
};
} /* end of initial routing logic */
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
++++++++++++++++++
# COMIENZO DE LA SECCION DE RUTAS
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
++++++++++++++++++
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
++++++++++++++++++
# Route 1 : Llamadas con destino plataforma
H.323#+++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+++++++++++++++++++++++
route[1]
{
# send it out now; use stateful forwarding as it
works reliably
# even for UDP2TCP
# Esta NATEADO?
if (isflagset(5)) {
log(1, "NAT: At least one participant NAT'd
--> enable
reply
processing (hacia GW)\n");
t_on_reply("1");
if (method=="INVITE") {
log(1, "NAT: Invite received -->
enabling proxied
media session (hacia GW)\n");
setflag(1);
use_media_proxy();
};
};
rewritehostport("mygw.mydomain.com:5060");
append_hf("P-hint: GATEWAY\r\n");
if (!t_relay()) {
sl_reply_error();
break;
};
}
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+++++++++++++++++
# Route 4 : Llamadas a usuarios Off-line
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+++++++++++++++++
route[4] {
if (!t_newtran()) {
sl_reply_error();
};
if (!t_reply("404", "Not Found IT!")) {
sl_reply_error();
};
break;
}
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+++++++++++++++++
# On Reply Route 1 : Equipos NATeados!!
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++
+++++++++++++++++
onreply_route[1] {
if ((isflagset(5) || client_nat_test("3")) &&
(status=~"(180)|(183)|2[0-9][0-9]")) {
if (!search("^Content-Length:\ 0")) {
use_media_proxy();
};
};
if (client_nat_test("1")) {
fix_nated_contact();
};
}
Ricardo Martinez.-
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
Jiri Kuthan http://iptel.org/~jiri/