25 Jun
2004
25 Jun
'04
9:04 a.m.
On Fri, 25 Jun 2004, CM Rahman wrote:
Looking through your cisco config file, I am guessing
your E1 are not
Pri. Ami I correct? I am dealing with a channelized DS3 with T1 Pri. I
will also share my config file after I can get the call routed.
Currently I am getting this below. My understanding is there is
something wrong in the call going from cisco to Pri trunk. Anybody can
give me some clue, that will be great.
Enable these debugs in your gateway:
deb ccsip all
and some:
deb isdn xxx
where xxx can be q931, error, etc.
With this, you should see where is the problem.
-----Original Message-----
From: Stephen Kingham [mailto:Stephen.Kingham@aarnet.edu.au]
Sent: Thursday, June 24, 2004 11:56 PM
To: CM Rahman
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] as5400 and ser
Hi
Along with several other we are putting together a SER implementation
Tutorial for the R&E sector.
We have a page up the the AS5300 and it may help you, also if anyone is
interested in reviewing it?
http://www.aarnet.edu.au/events/conferences/2004/apan-questnet/sipworksh
op/uas/ciscoas5300.html
Regards
Stephen
CM Rahman wrote:
Saludos
JesusR.
-------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr(a)voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------
Anybody here using cisco as5400 for PSTN
termination? I am having some
problem with call routing. If there are such person will to help,
please
drop me an email.
Thanks
&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*
C.M. Rahman Jr.
CCNP, MCSE Security "Secure your self by securing your System"
CompTI Security Plus Certified
CCS Internet
http://www.ccsi.com
13704 Research Blvd. Building O-Suite 4
Austin, TX 78750
Tel: 512-257-2274 Ex: 115
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Atle Samuelsen
Sent: Thursday, June 24, 2004 7:29 PM
To: Andreas Granig
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Weird problem when, restarting ser.
Hi Andy
* Andreas Granig <a.granig(a)inode.at> [040625 02:19]:
--
Stephen Kingham, MIT, BSc, E&C Cert
Project Manager and Consulting Engineer
mailto:Stephen.Kingham@aarnet.edu.au
Telephone +61 2 6222 3575 (office)
+61 419 417 471 (mobile)
Voice and Video over IP
for The Australian Academic Research Network (AARNet) and
http://www.aarnet.edu.au
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Andrei Pelinescu-Onciul wrote:
the
>>It started with log entries like this:
>>
>>Jun 24 11:55:54 voip /usr/local/ser/sbin/ser[16801]: ERROR:
>>build_req_buf_from_sip_req: out of memory
>>Jun 24 11:55:54 voip /usr/local/ser/sbin/ser[16801]: ERROR:
>>print_uac_request: no pkg_mem
>>Jun 24 11:55:54 voip /usr/local/ser/sbin/ser[16801]: ERROR:
>>t_forward_nonack: failure to add branches
>>
>>
This could be a mem. leak (but this is unrelated to the startup
problem).
I use a stock SER (0.8.12) without modifications. I just execute some
external C code by exec_dset and exec_msg, but this shouldn't matter.
Since this problem occured on our public server, I just wanted to get
the service up and running again and thus didn't think about dumping
database for later analysis on the test system.
However, I'll try to
reproduce this effect and send some logs...
I would check with Andrei and see what he says.
-Atle
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers