[SR-Users] too many recursive routing table lookups

I have another ERROR that is presenting: "WARNING: too many recursive routing table lookups (101) giving up!" I have a routing diagram that includes max number of channels per gateway. The dialog module keeps track of the number of channels use by active calls ( set_dlg_profile, get_profile_size) and if a gateway has reached his maximum , I search for next_gw(). This recursive mechanism can be made several times if many gateways of one route are full. But I analyzed the error and I have maximum 24 repeats of this process per call, never reach 100 repeats as shown by the ERROR. Can the maximum value of recursive lookups be the sum of lookups counting all the early dialogs? Regards, Camila *De:* Daniel-Constantin Mierla [mailto:miconda@gmail.com] *Enviado el:* lunes, 10 de marzo de 2014 14:21 *Para:* Camila Troncoso; Kamailio (SER) - Users Mailing List *Asunto:* Re: [SR-Users] Kamailio LCR unable to relay new calls, memory issue Indeed, "kamctl fifo get_statistics all" is the same as "kamctl stats" in newer versions. You run with default 32MB which is rather low, imo. You have less than 1MB free at this moment. Start kamailio with larger memory, like -m 512. It is not going to be taken from the system unless kamailio is really using it. Cheers, Daniel On 10/03/14 17:01, Camila Troncoso wrote: Daniel, With the command " kamctl fifo get_statistics all" i get this: shmem:fragments = 2565 shmem:free_size = 1028552 shmem:max_used_size = 33554432 shmem:real_used_size = 32525880 shmem:total_size = 33554432 shmem:used_size = 26417552 Regards, Camila *De:* Camila Troncoso [mailto:ctroncoso@redvoiss.net] *Enviado el:* lunes, 10 de marzo de 2014 12:43 *Para:* &#39;miconda(a)gmail.com&#39;com'; 'Kamailio (SER) - Users Mailing List' *Asunto:* RE: [SR-Users] Kamailio LCR unable to relay new calls, memory issue Daniel, I haven't use the -m command. I´m running kamailio 3.2.4 version. The command kamctl stats is not available. Regards, Camila *De:* sr-users-bounces(a)lists.sip-router.org [ mailto:sr-users-bounces@lists.sip-router.org<sr-users-bounces@lists.sip-router.org>] *En nombre de *Daniel-Constantin Mierla *Enviado el:* lunes, 10 de marzo de 2014 11:52 *Para:* Kamailio (SER) - Users Mailing List *Asunto:* Re: [SR-Users] Kamailio LCR unable to relay new calls, memory issue Hello, how much shared memory have you allocated to kamailio? In other words, have you given any value via -m command line parameter? You can see it also via: kamctl stats Look for shmem fields. Cheers, Daniel On 10/03/14 14:37, Camila Troncoso wrote: Hi, Last Friday I presented a increase of load in kamailio by a client. The load was almost twice as usual. By that time I encountered with many issues in kamailio. The calls were not relay to gateways, and a lot of messages about memory were appearing in log file. Kamailio didn't crash. When I remove the extra traffic all went back to normal. Is there a issue about memory leak or about to few memory resources to manage this amount of traffic? ERROR: tm [t_reply.c:1799]: ERROR: relay_reply: cannot alloc reply shmem ERROR: <core> [msg_translator.c:1782]: ERROR: build_req_buf_from_sip_req: out of memory ERROR: tm [t_fwd.c:431]: ERROR: print_uac_request: no shm mem ERROR: tm [t_fwd.c:1534]: ERROR: t_forward_nonack: failure to add branches ERROR: tm [tm.c:1369]: ERROR: w_t_relay_to: t_relay_to failed ERROR: tm [t_reply.c:598]: ERROR: _reply_light: cannot allocate shmem buffer ERROR: tm [t_msgbuilder.c:371]: ERROR: cannot allocate shared memory ERROR: tm [t_msgbuilder.c:521]: ERROR: build_local_reparse: cannot build ACK request MERROR: tm [t_msgbuilder.c:371]: ERROR: cannot allocate shared memory ERROR: tm [t_msgbuilder.c:521]: ERROR: build_local_reparse: cannot build ACK request ERROR: sl [sl_funcs.c:282]: ERROR: sl_reply_error used: No error (2/SL) ERROR: <core> [msg_translator.c:1782]: ERROR: build_req_buf_from_sip_req: out of memory ERROR: tm [t_fwd.c:431]: ERROR: print_uac_request: no shm mem ERROR: tm [t_fwd.c:1534]: ERROR: t_forward_nonack: failure to add branches ERROR: tm [tm.c:1369]: ERROR: w_t_relay_to: t_relay_to failed ERROR: sl [sl_funcs.c:282]: ERROR: sl_reply_error used: No error (2/SL) ERROR: <core> [sip_msg_clone.c:506]: ERROR: sip_msg_cloner: cannot allocate memory ERROR: tm [t_lookup.c:1338]: ERROR: new_t: out of mem: ERROR: tm [t_lookup.c:1478]: ERROR: t_newtran: new_t failed ERROR: sl [sl_funcs.c:282]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) Regards, Camila *Camila Troncoso Solar **|* Ingeniero de Desarollo +56 2 22408535 *·* +56 9 97327220 | ctroncoso(a)redvoiss.net Badajoz 130, piso 16, Las Condes | Santiago - CHILE | *www.redvoiss.com <http://www.redvoiss.com>* _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio World Conference - April 2-4, 2014, Berlin, Germany http://www.kamailioworld.com -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio World Conference - April 2-4, 2014, Berlin, Germany http://www.kamailioworld.com