sr-users

sr-users@lists.kamailio.org

25 participants
37440 discussions

RE: [Serusers] SER/SERWeb Howto...
by MANSOOR Usama FTRD/DMR/LON 12 Dec '02

12 Dec '02

OK, thanks, that did the trick. I added the 'ser' username and password to the 'db_url' parameter, changed '127.0.0.1' to 'localhost', and now it works :) Thanks again - Usama

1 0

RE: RE: [Serusers] SER/SERWeb Howto...
by MANSOOR Usama FTRD/DMR/LON 12 Dec '02

12 Dec '02

OK, I've tried running the script as root (and it prompts me for the password) but the permissions still don't get set. So I then log in manually to the mysql database and set the permissions using 'GRANT' to be the same as mentioned in the faq. Unfortunately I still get the following error message: Dec 12 10:20:25 localhost /usr/sbin/ser[14700]: connect_db(): Access denied for user: 'user(a)localhost.localdomain' (Using password: YES) Dec 12 10:20:26 localhost /usr/sbin/ser[14700]: db_init(): Error while trying to connect database Dec 12 10:20:26 localhost /usr/sbin/ser[14700]: init_modules(): Error while initializing module jabber I'm not sure what else to try. Any suggestions would be much appreciated. - Usama -----Original Message----- From: Dan Austin [mailto:Dan_Austin@Phoenix.com] Sent: Friday, December 06, 2002 5:41 PM To: serusers(a)lists.iptel.org Subject: RE: RE: [Serusers] SER/SERWeb Howto... Are you running the script as root? Before upgrading MySQL I did use the grant command, and managed to get the correct permissions installed. I ran into other problems with the client libraries, so I did a complete upgrade. After upgrading the ser_mysql.sh script did everyting it should have and I did not need to make any changes. I'm also fairly new to MySQL, but from your error message, it looks like you are running the script from an account that does not have permissions inside the database. As root if you run mysql, does it prompt for a password? From your select statement, I would not expect it to. If it allows you to logon to the database, you can try to assign the default permissions manually. Dan <snip>

2 1

RE: RE: [Serusers] SER/SERWeb Howto...
by MANSOOR Usama FTRD/DMR/LON 12 Dec '02

12 Dec '02

Yep, I can log in to mysql using both 'ser' and 'serro' user names. Where in the ser config file should these user name and password be set? - Usama -----Original Message----- From: Jiri Kuthan [mailto:jiri@iptel.org] Sent: Thursday, December 12, 2002 11:46 AM To: MANSOOR Usama FTRD/DMR/LON; serusers(a)lists.iptel.org Subject: RE: RE: [Serusers] SER/SERWeb Howto... At 11:38 AM 12/12/2002, MANSOOR Usama FTRD/DMR/LON wrote: >OK, I've tried running the script as root (and it prompts me for the password) but the permissions still don't get set. You might have read my previous email and learned that the issue had not been probably caused by insufficient rights. Is it possible that you did not set your username/password in ser configuration properly? Can you login with this username/password pairs using the mysql tool? I would really start with such trivial checks. -Jiri

1 0

RE: RE: [Serusers] SER/SERWeb Howto...
by Jiri Kuthan 12 Dec '02

12 Dec '02

At 11:38 AM 12/12/2002, MANSOOR Usama FTRD/DMR/LON wrote: >OK, I've tried running the script as root (and it prompts me for the password) but the permissions still don't get set. You might have read my previous email and learned that the issue had not been probably caused by insufficient rights. Is it possible that you did not set your username/password in ser configuration properly? Can you login with this username/password pairs using the mysql tool? I would really start with such trivial checks. -Jiri

1 0

Re: [Serusers] SER/Jabber question
by Daniel-Constantin MIERLA 12 Dec '02

12 Dec '02

Hello, >>Hi all! >> >>I'm new to SER, and already I have a question regarding the SER to Jabber: If I setup the jabber.so module to interface to a jabber server for IM, what's the recommended way to monitor the presence status of the SIP IM client? >> The presence support is not implemented yet in the public release of Jabber module. I hope this week (there are still 2 days ... :-) ) the new version will be available. >>For example, if a user with MSN Messenger registers with SER, and I set a rule that at registration the jab_go_online call will be made so this user is available on the jabber server, how do I monitor the Messenger user's presence? I mean, they're not subscribed to, so the Messenger client doesn't send presence updates to SER, and hence to the jabber server. >> >>Then, of course, if I do subscribe from SER, who maintains the state? >> The upcoming Presence Agent for SER (a new module) will manage all the presence states for users. The Jabber module will use PA to notify SIP user about presence state of a Jabber user when that SIP user subscribes for Jabber user's presence. Best regards, Daniel >> >>Hmmmm.... >> >>Any help or examples would be terrific! >> >>Thanks! >>- Chris >> >>Chris Dingman >>dingman(a)avaya.com >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >> > >-- >Jiri Kuthan http://iptel.org/~jiri/ > > >

2 2

[Serusers] SER/Jabber question
by Christopher Dingman 11 Dec '02

11 Dec '02

Hi all! I'm new to SER, and already I have a question regarding the SER to Jabber: If I setup the jabber.so module to interface to a jabber server for IM, what's the recommended way to monitor the presence status of the SIP IM client? For example, if a user with MSN Messenger registers with SER, and I set a rule that at registration the jab_go_online call will be made so this user is available on the jabber server, how do I monitor the Messenger user's presence? I mean, they're not subscribed to, so the Messenger client doesn't send presence updates to SER, and hence to the jabber server. Then, of course, if I do subscribe from SER, who maintains the state? Hmmmm.... Any help or examples would be terrific! Thanks! - Chris Chris Dingman dingman(a)avaya.com

1 0

[Serusers] cpl problem
by haibo_chen 10 Dec '02

10 Dec '02

serusershi, i have some problems with cpl and cpl-c modules. first: in cpl module,what's the Java CPL Interpreter Server, is it another server for interpret cpl? where can i get Java CPL Interpreter Server? second:in cpl-c module ,i can't find the function for processing the sip_message and cpl, just like the executeCPLForSIPMessage fuction in cpl module ? three: with cpl or cpl-c module ,how to realize the cpl function with ser? i have compiled the both modules and loaded with ser. thanks! regards,Joe_chen

2 1

[Serusers] debugging / learning curve log() question
by lgfausak＠august.net 10 Dec '02

10 Dec '02

I have found the log() function aids in debugging (obviously). Are there any low level string productions so I can pass more information to log? For instance, it would be great to: log("in route[1] with uri ".uri." and method ".method); Can anything be passed to log() besides a static string? ---greg Greg Fausak August.Net Services, LLC greg(a)august.net

2 1

[Serusers] Noisy feedback
by lgfausak＠august.net 09 Dec '02

09 Dec '02

I am constantly seeing this warning: Warning: 392 216.87.128.67:5060 "Noisy feedback tells: pid=3961 req_src_ip=216.87.128.68 in_uri=sip:216.87.128.67 out_uri=sip:216.87.128.67 via_cnt==1". What does it mean??? ---greg

2 1

Re: [Serusers] new release of admin guide available
by lgfausak＠august.net 09 Dec '02

09 Dec '02

Thank you for the reply. I guess what I'm asking is what does stateful do? Does it take control of all requests relating to the current call-id from that point on? So my may route logic does not need to think about ACKs and retransmissions? ---greg > >At 07:08 PM 12/9/2002, Greg Fausak wrote: >>Has this documentation always been available? >> >>This is definately making a difference for me! > >We just released this documentation update. > >Yes, forward is built-in, t_relay/t_relay_to is >part of tm modules. forward(<host>,<port>) or >t_relay_to("<host>", "<port>") sends a request >to the address in params. forward(uri:host, uri:port) >and t_relay() sends a request to the address in current >URI. > >The trade-offs between stateless forward and stateful >t_relay are described in >http://www.iptel.org/ser/doc/seruser-html/x740.html#AEN839 > >If you do not not, whether to go stateful or stateless, >you will be probably better if with stateful. > >Cheers, > >-Jiri > >-- >Jiri Kuthan http://iptel.org/~jiri/ > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers >

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users