sr-users

sr-users@lists.kamailio.org

20 participants
37232 discussions

Start a nNew thread

[Serusers] SER and TCP

by Cinzia Raineri

Hello, I would like know if SER support also the trasmission protocol TCP, or TLS. Thanks, Cinzia.

21 years, 7 months

[Serusers] SIP2Jabber Presence Support

by jaime.gill＠orange.co.uk

Daniel, Not sure if it has been asked before. Is presence support from SIP to Jabber and viceversa completely working in cvs version? Regards, Jaime ******************************************************************************* Important. Confidentiality: This communication is intended for the above-named person and may be confidential and/or legally privileged. Any opinions expressed in this communication are not necessarily those of the company. If it has come to you in error you must take no action based on it, nor must you copy or show it to anyone; please delete/destroy and inform the sender immediately. Monitoring/Viruses Orange may monitor all incoming and outgoing emails in line with current legislation. Although we have taken steps to ensure that this email and attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. Orange PCS Limited is a subsidiary of Orange SA and is registered in England No 2178917, with its address at St James Court, Great Park Road, Almondsbury Park, Bradley Stoke, Bristol BS32 4QJ. *******************************************************************************

21 years, 7 months

[Serusers] [Fwd: ser-0.8.10: Fehler beim Kompilierung der Quellencode.]

by Savasar Sinan UYGUR

21 years, 7 months

[Serusers] Connection to Jabber server lost

by jaime.gill＠orange.co.uk

Hi, When using the Jabber Gateway, some users get the following error from time to time: ERROR: Connection to Jabber server lost. You have to login to Jabber server again (join again the conferences that you were participating, too). sip_to_jabber_gateway says: INFO: Your are now offline in Jabber network. Thank you for using SIP-Jabber gateway. Do you know the reason why these messages appear and if it is possible to avoid them? Thanks, Jaime ******************************************************************************* Important. Confidentiality: This communication is intended for the above-named person and may be confidential and/or legally privileged. Any opinions expressed in this communication are not necessarily those of the company. If it has come to you in error you must take no action based on it, nor must you copy or show it to anyone; please delete/destroy and inform the sender immediately. Monitoring/Viruses Orange may monitor all incoming and outgoing emails in line with current legislation. Although we have taken steps to ensure that this email and attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. Orange PCS Limited is a subsidiary of Orange SA and is registered in England No 2178917, with its address at St James Court, Great Park Road, Almondsbury Park, Bradley Stoke, Bristol BS32 4QJ. *******************************************************************************

21 years, 7 months

[Serusers] Header Field P-Hint: USRLOC

by Karsten Knuettel

Hi, does anybody know anything about the P-Hint Header Field added from SER? Cheers, Karsten

21 years, 7 months

[Serusers] Change in the default log file

by Daniel Perez

Is there any way to change the defaul log file to a special SER.log file ????? Daniel

21 years, 7 months

Fwd: [Serusers] Multiple potential memory leaks in ser

by Jiri Kuthan

Maxim, Thank you very much for your report. I'm not the code owner who has the last word, but I agree there is a memory leak. It seems to me that insert_new_lump family is ok as long as the calling functions care to free their lump buffers on failure -- that's where the leak lives. Which imho happens at few places on CVS: +insert_new_lump_before - save_ruri in rr/loose.c - textops/append_hf_helper.c - (on contrary, it is ok in maxfwd/add_maxfwd_header, rr functions calling insert_RR, and msg_translator.c) +insert_new_lump_after - search_append_f in textops.c - replace_f in textops.c - (ok in build_req_buf...) The memory leak is unlikely to occur, as it is triggered by lack of private memory which (unlike shmem) hardly gets exhausted -- so operation is fortunately not affected. It will be fixed in the next release. -Jiri ps -- I swear on cscope :) >Folks, > >I've noticed that there are multiple potential memory leaks in SER. >The problem is that if a insert_new_lump*() function returns a NULL >for some reason (currently the only condition is memory allocation >error), it doesn't free the memory buffer passed to it and most of >the code doesn't care to deallocate that buffer after NULL is returned. >It could be easily fixed and probably needs to before the next version >is released. > >Thanks! > >-Maxim >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

21 years, 7 months

[Serusers] Question on gateway routing through UA proxy

by John Todd

Goal: To learn about ser in a "non-critical" and very small PBX-like environment so as to be able to understand nuances of the system in a production environment at a later date at various firms whose owners who have expressed to me a high degree of interest in SIP call routing for larger enterprise and CLEC implementations. Sub-Goal: to make all calls into and out of my house routed via IP to alternate destinations based on ser routing configuration. I have subscribed to a long-distance plan via "iconnecthere.com", I have a PRI gateway configured at a remote location (for calls into two area codes only) and my plan is to have a Cisco 2610 with FXO card for terminating my "local" phone line. My house phones are all Cisco ATA-186 devices. Based on called number, my calls will be sent to the iconnecthere.com SIP service, the Cisco PRI gateway, or the Cisco 2610 single-line gateway. Calls will also be routed appropriately based on number called on an inbound basis from any of those three gateway systems (PRI, 2610, or iconnecthere.com) Progress: I have phone-to-phone calling working well, and I have phone-to-PRI gateway calling working well in both directions. I have not yet received the 2610, so I do not have the single-line analog gateway running, but I don't expect any issues with that system, as I understand the Cisco implementation of inbound/outbound VOIP sessions. Problem: My "iconnecthere.com" account is a username/password protected account which (of course) requires a UA at my side of the connection. To forward calls from the various phones in the house, I would need to have something re-write my username/password requests on the fly when they are sent out to the iconnecthere.com SIP proxies/gateways. My first assumption is that I'll need a (sigh) B2BUA to act as a gateway, running (for convenience) on the same UNIX platform as ser. After thinking about it for a while, I am uncertain if that is required, but at this point I can't determine what I need to do. I would appreciate hints on: a) Wether I need a B2BUA at all, and if not, what config options should I be looking at in ser? b) If I do need a B2BUA, what would you recommend? I'm using OpenBSD as my platform, and (personally) I'd like to stay away from Java for the moment. Continuing discussion: I could see this as a fairly useful toolkit trick for a small business who wants to replace their phone switch with SER or ser-like systems. If you've got an office with 10 people, it may make economic sense to simply get "generic" accounts with a SIP long distance gateway provider like iconnecthere.com (there are others) and allocate each of those accounts to individuals in the organization. This is not a solution for a large-scale operation for the various reasons outlined in the http://www.iptel.org/info/trends/#b2bua texts, but the number of small-scale shops out there is very large and a simply understood package (and simply billed) is what would be desired for many places who still use under ~10 analog lines for outbound dialing from their PBX. Any outbound calls to certain prefixes would always be pushed through a specific account for LD calling. Additionally, inbound calling through a similar service would have to also come in via the same mechanism, with a REGISTER request being sent by the B2BUA and all subsequent calls being routed through the SER proxy. PS: I'd appreciate any open-source hints on how to get an ATA-186 (v2.15) running behind NAT with ser on the "outside" of the NAT, without statically configuring the "NAT" address on the ATA-186 every time the outside address changes. Lots of keyword matches found on Google, but very few clues to be scraped from the resulting documents as to "how" do it from the server side. JT

21 years, 7 months

[Serusers] Too much shared memory demanded: 33554432

by NIBLE

Greetings to all and happy new year I'm in the process of installing ser 0.8.10 on Linux (intel) and when I run Too much shared memory the "ser"executable I receive the following error message "Too much shared memory demanded: 33554432" When I turn the debug option on I receive the following: 0(4019) WARNING: hash function optimized for 1024 entries 0(4019) WARNING: use of 65536 entries may lead to unflat distribution 0(4019) ERROR: shm_mem_init: could not attach shared memory segment: Invalid argument 0(4019) could not initialize shared memory pool, exiting... Too much shared memory demanded: 33554432 Any ideas? Thanks __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com

21 years, 7 months

[Serusers] sip server

by geetha shree

Dear Sir/Madam, We are developing a sip stack. We wanted to know whether you can provide any sip server for testing our stack. We also wanted to know the procedures invloved in it. Thanks in advance Geetha Catch all the cricket action. Download Yahoo! Score tracker

21 years, 7 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users