sr-users

sr-users@lists.kamailio.org

32 participants
37086 discussions

by Mario Kolberg

Hi, I have a problem with ser 0.8.11pre36 (i386/linux) which is the stable version downloaded from cvs: Often when I start it, it pretends to be ok (log file says Listing on ....) but in fact all ser processes are dead. I need to start it a few times usually, to get it running. Once it is running and I try to shut it down it writes a lot (thousands!) of error messages into the log file. Messages in the log seem to be repeated. This also occurs if no single message has been sent to it. I attach the config file I'm using and a short extract from the log file. Any ideas appreciated! (I did not have this problem with ser version 0.8.11pre26 which I used before.) Thanks, Mario -- The University of Stirling is a university established in Scotland by charter at Stirling, FK9 4LA. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not disclose, copy or deliver this message to anyone and any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of the University of Stirling shall be understood as neither given nor endorsed by it. # # $Id: ser.cfg,v 1.18 2003/05/06 16:19:15 janakj Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" alias="cs.stir.ac.uk" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" #loadmodule "/usr/local/lib/ser/modules/pscon.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") #modparam("pscon", "polserver_name", "d254203.cs.stir.ac.uk") #modparam("pscon", "polserver_port", 9997) #modparam("pscon", "lead_msg", "") #modparam("pscon", "tail_msg", "") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # exec_pol(); # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing loose_route(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("cs.stir.ac.uk", "subscriber")) { www_challenge("cs.stir.ac.uk", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Jul 7 12:20:47 d254203 ser: Listening on Jul 7 12:20:47 d254203 ser: 127.0.0.1 [127.0.0.1]:5060 Jul 7 12:20:47 d254203 ser: 139.153.254.203 [139.153.254.203]:5060 Jul 7 12:20:47 d254203 ser: Aliases: d254203.cs.stir.ac.uk:5060 localhost:5060 localhost.localdomain:5060 d254203:5060 cs.stir.ac.uk:* Jul 7 12:20:47 d254203 ser: Listening on Jul 7 12:20:47 d254203 ser: 127.0.0.1 [127.0.0.1]:5060 Jul 7 12:20:47 d254203 ser: 139.153.254.203 [139.153.254.203]:5060 Jul 7 12:20:47 d254203 ser: Aliases: d254203.cs.stir.ac.uk:5060 localhost:5060 localhost.localdomain:5060 d254203:5060 cs.stir.ac.uk:* Jul 7 12:20:47 d254203 ser: Listening on Jul 7 12:20:47 d254203 ser: 127.0.0.1 [127.0.0.1]:5060 Jul 7 12:20:47 d254203 ser: 139.153.254.203 [139.153.254.203]:5060 Jul 7 12:20:47 d254203 ser: Aliases: d254203.cs.stir.ac.uk:5060 localhost:5060 localhost.localdomain:5060 d254203:5060 cs.stir.ac.uk:* Jul 7 12:20:47 d254203 ser: ser startup succeeded Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1109]: mod_init(): Database connection opened successfuly Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1109]: INFO: udp_init: SO_RCVBUF is initially 65535 Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1109]: INFO: udp_init: SO_RCVBUF is finally 131070 Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1109]: INFO: udp_init: SO_RCVBUF is initially 65535 Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1109]: INFO: udp_init: SO_RCVBUF is finally 131070 Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1127]: INFO: fifo process starting: 1127 Jul 7 12:20:47 d254203 /usr/local/sbin/ser[1127]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: used= 3764, used+overhead=36332, free=986540 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: max used (+overhead)= 36368 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: dumping all allocked. fragments: Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: 0. N address=0x80bd3b0 frag=0x80bd398 size=16 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: alloc'd from fifo_server.c: register_fifo_cmd(122) Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: start check=f0f0f0f0, end check= c0c0c0c0, abcdefed Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: 1. N address=0x80bd3f0 frag=0x80bd3d8 size=16 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: alloc'd from fifo_server.c: register_fifo_cmd(122) Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: start check=f0f0f0f0, end check= c0c0c0c0, abcdefed Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1144]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1143]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1142]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1141]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1140]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1127]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1126]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1119]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1118]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1117]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1116]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1115]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1114]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1113]: INFO: signal 15 received Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: 2. N address=0x80bd430 frag=0x80bd418 size=16 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1144]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1143]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1142]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1141]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1140]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1127]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1126]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1119]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1118]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1117]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1116]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1115]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1114]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1113]: Memory status (pkg): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: alloc'd from fifo_server.c: register_fifo_cmd(122) Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1144]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1143]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1142]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1141]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1140]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1127]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1126]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1119]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1118]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1117]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1116]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1115]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1114]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1113]: qm_status (0x80b6f60): Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: start check=f0f0f0f0, end check= c0c0c0c0, abcdefed Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1144]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1143]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1142]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1141]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1140]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1127]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1126]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1119]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1118]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1117]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1116]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1115]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1114]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1113]: heap size= 1022872 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1149]: 3. N address=0x80bd470 frag=0x80bd458 size=16 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1144]: used= 3764, used+overhead=36332, free=986540 Jul 7 12:20:58 d254203 /usr/local/sbin/ser[1143]: used= 3764, used+overhead=36332, free=986540

20 years, 10 months

[Serusers] adding a header

by Mario Kolberg

Hi, I'm trying to add a header to SIP messages (for a research project). However, it seems as ser (version 0.8.11pre26) doesn't like my code. Below is the function which is part of a module. It seems as depending on the length of the variable test, ser either crashes or just doesn't send on the full message (truncated after the new header). It sounds a bit like a memory problem. I tried to make sure that memory is properly allocated (thats why the pkg_malloc) and the string is terminated. I'd be grateful for any pointers! Thanks, Mario -- static int exec_pol(struct sip_msg* msg, char* string, char* string2) { struct lump* anchor; char* nheader; char test[] = "ConType: ABC"; LOG(L_ERR, "PSCON: New Attempt to Add a Header"); if (parse_headers(msg, HDR_EOH, 0) == -1) { LOG(L_ERR, "Error parsing headers"); return 1; } if(msg->first_line.type == SIP_REQUEST) { anchor = anchor_lump(&msg->add_rm, msg->eoh - msg->buf, 0, 0); if (anchor == 0) { LOG(L_ERR, "Problem with getting anchor"); return 1; } nheader = pkg_malloc(strlen(test)+1); strcpy(nheader, test); nheader[strlen(test)]=0; if (insert_new_lump_after(anchor, nheader, strlen(nheader)+1, 0)==0) { LOG(L_ERR, "ERROR: inserting new header"); } } LOG(L_ERR, "pscon: all fine, returning now ...\n"); return 1; } -- The University of Stirling is a university established in Scotland by charter at Stirling, FK9 4LA. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not disclose, copy or deliver this message to anyone and any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of the University of Stirling shall be understood as neither given nor endorsed by it.

20 years, 10 months

[Serusers] restart problems with 0.8.10 and >6000 locations

by Volker Voigt

Hi! I'm using ser 0.8.10 with mysql on RedHat 8.1. For some loadtests I generated 10000 REGISTERs with sipsak. Worked fine. I stopped ser and tried to restart it. During that I found out that ser won't start if more than ~6000 entries are in the location table of mysql. The start script says "OK", but a "ps aux" afterwards shows that no ser process is running. A look into /var/log/messages shows nothing (debug level set to 9). After reducing the number of entries with the mysql command client to <6000 ser will start up and copy the entries to its memory, as 'serctl monitor' shows. Am I missing something? Best regards, Volker

20 years, 10 months

[Serusers] IETF in Vienna

by Jiri Kuthan

Hello serusers, few of our iptel team including myself will be in the upcoming IETF meeting in Vienna. http://www.ietf.org/meetings/IETF-57.html Contact me if you wish to talk together. -Jiri -- Jiri Kuthan http://iptel.org/~jiri/

20 years, 10 months

[Serusers] Record-Route with domains

by Fernando Nachtigall

Hello all, Is there a way to make SER use its domain name instead of IP address when placing itself in Record-Route field? Fernando Nachtigall --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.488 / Virus Database: 287 - Release Date: 6/5/2003

20 years, 10 months

[Serusers] RE: 483 - Too many hops

by chintan

It works with the IP address after @. The only time it gives error in my case is when the proxy is listed in the Route header Thanks, I have seen this problem as well I thought it was just me. It seemed to be related to using IP addresses after the @ instead of a hostname after the @. It was happening to me when I was trying to REGISTER. When I used the hostname instead of IP address after the @ the problem went away. This does look like some kind of bug, because both should work.

20 years, 10 months

[Serusers] questions???

by Hassan CHOUMAR

Hello, I installed the server ser and the graphic interface serweb; but when I open the administrative page of serweb as for example: Http: //mydomain.com/serweb/admin/ I cannot connect on this page Anybody knows are what the username, and password has to put during the identification Thanks you in advance Hassan CHOUMAR Hassan cité universitaire de la pacaterie (chambre459) 91400 Orsay Por :33/0675909977 Email: hmchoumar(a)hotmail.com

20 years, 10 months

[Serusers] questions?

by Hassan CHOUMAR

Hello all, I well installed the SER with serweb in my PC , but I have a probleme that every time I want to restart the server SER,it gives a message as which it is stop For example: > /etc./init.d/ser restart Arret de ser echoué Demarrage de ser completé > anybody knows why resolve my problem Cordialement Hassan CHOUMAR Hassan cité universitaire de la pacaterie (chambre459) 91400 Orsay Por :33/0675909977 Email: hmchoumar(a)hotmail.com

20 years, 10 months

[Serusers] SER with Mysql (I am not a linux guru, sorry)

by Director General: NEFACOMP

When installing SER and configuring it to work with MySQL. Do I need to create the database and tables or there is a script that can do it for me. Also, how do I uninstall SER? I am sure that someone can help me!!! Thanks, __________________________________ NZEYIMANA Emery Fabrice NEFA Computing Services, Inc. P.O. Box 5078 Kigali Office Phone: +250-51 11 06 Office Fax: +250-50 15 19 Mobile: +250-08517768 Email: dg(a)nefacomp.net http://www.nefacomp.net/

20 years, 10 months

[Serusers] Fatl erro while trying to use Serweb

by Director General: NEFACOMP

I think I should post this to the PHP or MySQL mail list but if anyone can help me, please. Below is the error message I am getting while trying to open serweb. Fatal error: Call to undefined function: mysql_pconnect() in /var/www/phplib/db_mysql.inc on line 73 I have not tried to see if other PHP-MYSQL stuffs work. Please help me __________________________________ NZEYIMANA Emery Fabrice NEFA Computing Services, Inc. P.O. Box 5078 Kigali Office Phone: +250-51 11 06 Office Fax: +250-50 15 19 Mobile: +250-08517768 Email: dg(a)nefacomp.net http://www.nefacomp.net/

20 years, 10 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users