- sr-users - kamailio.org

Kamailio DRA - Unable to get diameter_request() function to send
by Nick Jones 10 Aug '19

10 Aug '19

Hi Kamailio users, I'm trying to setup Kamailio as a Diameter Routing Agent, but I just can't seem to get the diameter_request() function to actually send a diameter request, I just get a warning about no JSON Response: *WARNING: ims_diameter_server [avp_helper.c:341]: addAVPsfromJSON(): No JSON Response* Inside my event route I've got one line to send the data to the peer "ims-hss.localdomain": *event_route[diameter:request]{ diameter_request("ims-hss.localdomain", $diameter_application, $diameter_command, $diameter_request); xlog("Forwarded Diameter Request");}* Hard as I try I can't seem to get this request forwarded to this peer and see that next xlog() line. In the config file I've included the cdp_check_peer & cdp_has_app checks to confirm the peer is up, and able to accept the request, (full config in pastebin below) I've defined the peers in the diametercfg.xml config file, and they're all showing as online when I do a "kamcmd cdp.list_peers": * FQDN: ims-hss.localdomain Details: { State: I_Open Disabled: False Last used: 0 Applications: { appid:vendorid: 16777216:10415 appid:vendorid: 16777216:4491 appid:vendorid: 16777216:13019 appid:vendorid: 16777216:0 appid:vendorid: 16777217:10415 appid:vendorid: 16777221:10415 } }* The source of avp_helper.c shows the warning is called if the length of the JSON is <= 0, but as I'm feeding back out what I've received it's not 0, an no recent major changes to the source, so I'm stumped as to why it's catching this. I'm running Kamailio 5.1.2 on Ubuntu 18.04 installed from Repos. Full Kamailio Config: https://pastebin.com/afgqUfWr Diameter CDP Config XML: https://pastebin.com/bVrBG8mG Relevant Syslog: https://pastebin.com/ZY8z2kd4 Kamcmd cdp.list_peers: https://pastebin.com/cKi4JAHC Any ideas as to what am I missing? Thanks in advance! Nick

1 0

need to Configure S-CSCF, I-CSCF and P-SCF
by ganesh nanaiah 10 Aug '19

10 Aug '19

Hi how do we configure the S-CSCF, I-CSCF and P-CSCF in kamalio 5.2.3 to authenicate with the HSS/PCRF, please point us to document to configure the IMS modules regards Ganesh

3 2

kamailio as UAC and NAPTR / sendsocket question
by Karsten Horsmann 09 Aug '19

09 Aug '19

Hi List, I try to register to Deutsche Telekom and there product Deutschland Lan siptrunk. Thats works find but i see an intressting behaviour on selecting the right outgoing interface. Kamailio is sending out with tcp the REQUEST via first private ip configured on that server (172.20.120.53). There is no listen directive for that. I forced NAPTR to use tcp or udp and i assume that kamailio got the right dns answers. On the list i read also that i can use force_send_socket to force the outgoing request. Now my idea - hey i use the $rP for the outgoing to select the right outgoing listen directive. $rP - reference to transport protocol of R-URI But to my surprise the logfile told me thats "UDP" - it sends out via TCP (thats okay). Whats an good transport selector variable from kamailio that works? event_route[tm:local-request] { if(!is_method("OPTIONS")) { xlog("L_INFO", "[tm:local-request] request [$rm] from [$fu] to [$ru] [$rP]\n"); } } INFO: <script>: [tm:local-request] request [REGISTER] from [ sip:+49XXXXXXXX@sip-trunk.telekom.de] to [sip:sip-trunk.telekom.de] [UDP] listen=tcp:2xx.xx.xx.xx:5060 listen=udp:2xx.xx.xx.xx:5060 listen=tls:2xx.xx.xx.xx:5061 advertise CFG_EXT_NAME:5061 listen=udp:172.20.120.55:5060 listen=udp:172.20.120.56:5060 listen=udp:172.20.120.57:5060 listen=udp:172.20.120.58:5060 listen=tcp:172.20.120.58:5060 use_dns_cache=on # use internal DNS cache use_dns_failover=on # depends on internal DNS cache dns_srv_loadbalancing=on dns_try_naptr=on dns_retr_time=1 # seconds before retrying a DNS request dns_retr_no=3 # number of DNS retransmissions dns_naptr_ignore_rfc=yes # ignore target NAPTR priority dns_tcp_pref=30 # TCP has second-highest priority dns_udp_pref=10 # use UDP with least priority tcp_connection_lifetime=3605 # set higher than registration expires #dont' restore modparam("uac","restore_mode","none") modparam("uac","restore_dlg",0) ## UAC REGISTER #!ifdef WITH_UAC_REGISTER modparam("uac", "reg_contact_addr", "CFG_PROD_IP") modparam("uac", "reg_timer_interval", 10) modparam("uac", "reg_retry_interval", 10) modparam("uac", "reg_db_url", DBURL) modparam("uac", "restore_mode", "none") modparam("uac", "auth_username_avp", "$avp(AVP_AUTH_USERNAME)") modparam("uac", "auth_password_avp", "$avp(AVP_AUTH_PASSWORD)") modparam("uac", "auth_realm_avp", "$avp(AVP_AUTH_REALM)") #!endif ip a l 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens192: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:50:56:b5:c1:48 brd ff:ff:ff:ff:ff:ff inet 172.20.120.53/24 brd 172.20.120.255 scope global ens192 valid_lft forever preferred_lft forever inet 2xx.xx.xx.xx/29 scope global ens192 valid_lft forever preferred_lft forever inet 172.20.120.56/24 scope global secondary ens192 valid_lft forever preferred_lft forever inet 172.20.120.57/24 scope global secondary ens192 valid_lft forever preferred_lft forever inet 172.20.120.58/24 scope global secondary ens192 valid_lft forever preferred_lft forever inet 172.20.120.55/24 brd 172.20.120.255 scope global secondary ens192 valid_lft forever preferred_lft forever inet6 fe80::250:56ff:feb5:c148/64 scope link valid_lft forever preferred_lft forever default via 172.20.120.253 dev ens192 172.20.120.0/24 dev ens192 proto kernel scope link src 172.20.120.53 2xx.xx.xx.xx/29 dev ens192 proto kernel scope link src 2xx.xx.xx.xx -- Kind Regards Mit freundlichen Grüßen *Karsten Horsmann*

4 9

failure_route - no UAC support
by Attila Czébán 09 Aug '19

09 Aug '19

Hello, I'm trying to restart phones with local-requests (from config or kamctl cisco_restart). I can enable t_on_failure("REMOTE_AUTH") in event_route[tm:local-request] but when 401 Reply comes in I get this warning: "tm [t_reply.c:968]: run_failure_handlers(): no UAC support (1, 0)". kamailio -V version: kamailio 5.1.8 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 6.3.0 How can I make it work? Thank you! Regards, Attila

1 0

Kamailio auth via http post.
by Zhan Bazarov 09 Aug '19

09 Aug '19

Hello, Its possible to made authentication via http request to third party Web-API instead of storing users credentials into Dataqbase? Now I looking on auth_ephemeral, but not sure is that my case... Don't see when I have to put API url.. Could anyone, please, shed any light on this issue?

2 1

XMLRPC request URL
by David Villasmil 08 Aug '19

08 Aug '19

Hello guys, I can't find any reference to a pseudovariable containing the request url, i.e.: http://myserver/XMLRPC?server=1.2.3.4 I'd like to get that server variable and manipulate the dispatcher list... the http client can't do XMLRPC or add a body, just an https request.. Any ideas? Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

2 3

Breaking HTABLE changes from v5.2 to v5.3? Function renamed
by Joel Serrano 08 Aug '19

08 Aug '19

Hi all, Just noticed that when updating from 5.2 to 5.3 I saw some errors in Kam logfile regarding HTABLE module commands failing, the reason is the function 'sht_has_name' has been renamed to 'sht_match_name': https://www.kamailio.org/docs/modules/stable/modules/htable.html#htable.f.s… https://www.kamailio.org/docs/modules/devel/modules/htable.html#htable.f.sh… Not sure if updating this doc is automatic or manual but I think it's definitely worth mentioning: https://www.kamailio.org/wiki/install/upgrade/stable-to-devel Just FYI! Cheers, Joel.

2 1

Re: [SR-Users] Sqlops
by arish haque 08 Aug '19

08 Aug '19

Hi, Passing the value within single quotes works. Thanks for the help Fred. With Regards, Arish

1 0

Reload geoip2 database without restart
by Joel Serrano 07 Aug '19

07 Aug '19

Hi guys, Is there a way to instruct the geoip2 module to reload its database without a full restart of kamailio? Maybe some rpc command or something? I haven't found anything in the docs other than the comment about "Database is loaded at startup in cache." which makes me assume that just overwriting the db file wouldn't be enough. Any suggestions? Thanks!! Joel.

2 2

Sipt redirection number retrieves old values
by Duarte Rocha 07 Aug '19

07 Aug '19

Greetings, I'm doing VoiceMail detection using $sipt(redirection_number) from SIPT module and i've been having some false positives on the detection. I inspected further and noticed that in some cases $sipt(redirection_number) returns old values from previous messages, which makes me think that it's value is not being correctly refreshed. I'm using this variable on a on_reply_route. As far as i know, $sipt(redirection_number) is read only and can't be refreshed by me in the code. Here is an example : Aug 7 16:51:49 dev_sbc_a_vts01 /usr/local/kamailio-5.2/sbin/kamailio[4746]: ERROR: <script>: VMD2 : Reply Code : 180 ; Sipt Redir = 9610050000 and Call ID = 00158FED-98B7-E911-8B3B-4DA50AE2ED72(a)192.168.24.86 and Cseq = 83 Here is the JSON from the 180 message : https://pastebin.com/zFHKxyav As you can see, there isn't any 9610050000 in the message. What can be causing this issue ? Best Regards, Duarte Rocha

2 2

Sqlops
by arish haque 07 Aug '19

07 Aug '19

Hi all, I am querying mysql db inside routing block in kamailio.cfg ERROR: db_mysql [km_dbase.c:128]: db_mysql_submit_query(): driver error on query: Unknown column '8d77' in 'where clause' (1054) Aug 7 18:09:22 localhost /usr/local/sbin/kamailio[25333]: ERROR: <core> [db_query.c:181]: db_do_raw_query(): error while submitting query Aug 7 18:09:22 localhost /usr/local/sbin/kamailio[25333]: ERROR: sqlops [sql_api.c:265]: sql_do_query(): cannot do the query [select * from vca_asterisk where front_id=8d77] I'm getting the above error message when, variable front_id=8d77 is alphanumeric. It's working fine when front_id is pure numeric. eg: front_id=877 Database column front_id is VARCHAR(255). Any suggestions to solve this error? Thanks, Arish

2 1

ul.rm_contact usage
by Володимир Іванець 07 Aug '19

07 Aug '19

Hello, I'm trying to use *ul.rm_contact* RPC command to unregister spesific Contact but can not figure out "contact" parameter. I tried different combinations but received "error: 404 - Contact not found" message every time. Could please someone tell how this command should be called for one of registered Contacts? Thank you! *# kamcmd ul.dump* *{* * Domains: {* * Domain: {* * Domain: location* * Size: 1024* * AoRs: {* * Info: {* * AoR: 200-test* * HashID: 406934013* * Contacts: {* * Contact: {* * Address: sip:200-test@1.1.1.1:52181;transport=TCP;rinstance=5d1a0b6b677f269d* * Expires: 114* * Q: -1.000000* * Call-ID: YmNlMmJlNDMwMGY5NGFkYzkzOTU2NDFhNzc5NWE3Mzc.* * CSeq: 4* * User-Agent: 3CXPhone 6.0.26523.0* * Received: sip:1.1.1.1:52181;transport=tcp* * Path: [not set]* * State: CS_NEW* * Flags: 0* * CFlags: 65536* * Socket: tcp:172.16.30.205:5060 <http://172.16.30.205:5060>* * Methods: 5119* * Ruid: uloc-5d4983fb-40b5-4* * Instance: [not set]* * Reg-Id: 0* * Server-Id: 0* * Tcpconn-Id: 3* * Keepalive: 0* * Last-Keepalive: 1565099252* * Last-Modified: 1565099252* * }* * Contact: {* * Address: sip:200-test@1.1.1.1:58166;rinstance=5996b96740d52a3a* * Expires: 118* * Q: -1.000000* * Call-ID: 97566MWMxYmVhMmE1OGUyOTlkMzVmYTYzZmE2ZDE5YWJkYTc* * CSeq: 4* * User-Agent: X-Lite release 5.5.0 stamp 97566* * Received: sip:1.1.1.1:58166 <http://1.1.1.1:58166>* * Path: [not set]* * State: CS_NEW* * Flags: 0* * CFlags: 65536* * Socket: udp:172.16.30.205:5060 <http://172.16.30.205:5060>* * Methods: 5087* * Ruid: uloc-5d4983fb-4093-2* * Instance: [not set]* * Reg-Id: 0* * Server-Id: 0* * Tcpconn-Id: -1* * Keepalive: 0* * Last-Keepalive: 1565099256* * Last-Modified: 1565099256* * }* * }* * }* * }* * Stats: {* * Records: 1* * Max-Slots: 1* * }* * }* * }* *}*

2 2

100% CPU usage after NTP date update
by Benjamin Marty 07 Aug '19

07 Aug '19

Hello, I'm facing the same issue. Is there a solution for this in the meantime? Benjamin https://lists.kamailio.org/pipermail/sr-users/2015-November/090487.html

2 2

Problem with tcp connections
by logosvlad＠gmail.com 07 Aug '19

07 Aug '19

Hello! we have kamailio 5.2.3 and openssl 1.1.0f. wss connections incoming to kamailio and outgoing sip connections, after some time http request check not getting answer from kamailio. Netstat show increase recieve tcp buffer on connections of kamailio. We set up script which after not response of http check, run SIGSEGV of main process of kamailio. gdb) bt full #0 0x00007fb779279450 in futex_wait (private=<optimized out>, expected=1, futex_word=0x7fb6f78cb964) at ../sysdeps/unix/sysv/linux/futex-internal.h:61 __ret = -512 err = <optimized out> #1 futex_wait_simple (private=<optimized out>, expected=1, futex_word=0x7fb6f78cb964) at ../sysdeps/nptl/futex-internal.h:135 No locals. #2 __pthread_rwlock_wrlock_slow (rwlock=0x7fb6f78cb958) at pthread_rwlock_wrlock.c:67 waitval = 1 result = 0 futex_shared = <optimized out> #3 0x00007fb77995eee9 in CRYPTO_THREAD_write_lock () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 No symbol table info available. #4 0x00007fb779907896 in ?? () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 No symbol table info available. #5 0x00007fb77990807e in CRYPTO_free_ex_data () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 No symbol table info available. #6 0x00007fb779c65a09 in SSL_free () from /usr/lib/x86_64-linux-gnu/libssl.so.1.1 No symbol table info available. #7 0x00007fb777c022d6 in tls_h_tcpconn_clean (c=0x7fb6fbb73d58) at tls_server.c:655 extra = 0x7fb6fba1a6d0 __func__ = "tls_h_tcpconn_clean" #8 0x0000559ddff2966f in _tcpconn_free (c=0x7fb6fbb73d58) at core/tcp_main.c:1339 __func__ = "_tcpconn_free" #9 0x0000559ddff3c5f7 in tcpconn_put_destroy (tcpconn=0x7fb6fbb73d58) at core/tcp_main.c:3017 __func__ = "tcpconn_put_destroy" #10 0x0000559ddff3e0f2 in send_fd_queue_run (q=0x559de0518bc0 <send2child_q>) at core/tcp_main.c:3210 p = 0x7fb77e19e2c8 t = 0x7fb77e19e2c8 __func__ = "send_fd_queue_run" #11 0x0000559ddff4f61c in tcp_main_loop () at core/tcp_main.c:4548 si = 0x0 r = 10 __func__ = "tcp_main_loop" #12 0x0000559ddfe4e85d in main_loop () at main.c:1753 i = 3 pid = 0 si = 0x0 si_desc = "udp receiver child=2 sock=127.0.0.1:5060 (127.0.0.1:5060)\000\065\060\066\060)\000\000\000\000\200\000\000\000\000\000\000\000\002\000\000\000\000\006\000\000\000\000\000\000\000O \254\177\267\177\000\000p\324\067?\375\177\000\000\060\000\000\000\060\000\000\000\020\325\067?\375\177\000\000\360k\255}\267\177\000" nrprocs = 3 woneinit = 1 __func__ = "main_loop" #13 0x0000559ddfe554ce in main (argc=13, argv=0x7ffd3f37d7a8) at main.c:2696 cfg_stream = 0x559de1c10010 c = -1 r = 0 tmp = 0x7ffd3f37deba "" tmp_len = 32765 port = 1060623840 proto = 32695 options = 0x559de01c2a50 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 33232859 ---Type <return> to continue, or q <return> to quit--- rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x0 p = 0xf0b5ff <error: Cannot access memory at address 0xf0b5ff> st = {st_dev = 19, st_ino = 13222, st_nlink = 2, st_mode = 16832, st_uid = 108, st_gid = 112, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = 4096, st_blocks = 0, st_atim = { tv_sec = 1560780032, tv_nsec = 539855841}, st_mtim = {tv_sec = 1565076521, tv_nsec = 998570962}, st_ctim = {tv_sec = 1565076521, tv_nsec = 998570962}, __glibc_reserved = {0, 0, 0}} __func__ = "main" Maybe our problem correlate with https://github.com/kamailio/kamailio/issues/1860

1 0

app_ruby - invalid ruby environment attributes or parameters
by Andrew White 07 Aug '19

07 Aug '19

Hey all, I’m setting up a dev-7 (bd477f) server to test as per the other thread, however I’m getting the following loading my config: ERROR: app_ruby [app_ruby_api.c:465]: sr_kemi_ruby_exec_func_ex(): invalid ruby environment attributes or parameters I’m unsure what this error means - are there expected environment variables or other values that must be set? I didn’t see this issue in dev-4. I thought it might be not able to find the library, but I ran with debug=4 and saw: DEBUG: app_ruby [app_ruby_api.c:193]: ruby_sr_init_child(): test execution without error ERROR: app_ruby [app_ruby_api.c:107]: app_ruby_print_last_exception(): exception: undefined method `>' for false:FalseClass I changed kamailio.cfg to load my generic routing script, and during the onreply_manage it runs: scode = KSR::PV.get("$rs”) This now returns false (which appears to be the second error above, I check if scode is > 599). Has anything changed in the way ruby is loaded in dev-7? I’m using the same ruby/ruby-devel library versions on the same OS. I did this deploy the same with devel-4 a few weeks ago and this didn’t happen. Thanks! Andrew

3 8

using in almost one worker
by logosvlad＠gmail.com 06 Aug '19

06 Aug '19

Hello! We have in configuration : c <sr-users(a)lists.kamailio.org>hildren=3 tcp_children=30 But in 90-95% connections kamailio use one worker (one process) by statitistics netstat -anp. Why not using more other workers (processes) ?

2 2

what version openssl recomnded for kamailio 5.2.3
by logosvlad＠gmail.com 06 Aug '19

06 Aug '19

Hello! what version openssl 1.1.x did you recomnded for kamailio 5.2.3 for more stable operation ?

1 0

The domain module in 5.1.8 has a memory leak
by Mack Hendricks 06 Aug '19

06 Aug '19

Based on my tests, the memory leak is only exposed when you are using domain attributes, which are stored in the domain_attrs table. I wanted to see if anymore else is running into this issue. *Reproducible use case:* 1) Insert the following into the database insert into domain values (null,"aprilco.com","aprilco.com",now()); insert into domain_attrs values (null,"aprilco.com","pbx_type",0,"0",now()); insert into domain_attrs values (null,"aprilco.com","pbx_id",0,"65",now()); 2) Open a new terminal window and execute: watch "kamcmd core.shmmem" 3) Open up another terminal windows and execute: while true; do kamcmd domain.reload; done *Expected Results:* You will see the shared memory being allocated, but never freed. The more entries you have in the domain_attrs table, the faster it will run out of memory. Thanks, *Mack Hendricks / Head of Support / dOpenSource* web: http://dopensource.com support: +888-907-2085 dSIPRouter <http://dsiprouter.org/> - GUI focused on implementing Kamailio to provide SIP Trunking and PBX Hosting Services

2 3

Error Registering the user and finding the AVP
by jespinosa 06 Aug '19

06 Aug '19

Hello, My name is Javier, I must first apologize for my little knowledge about the tool and my poor English. I am trying to connect a functional core network LTE with Kamailio and I have used the Polaris Networks Solution that brings an iso with both functionalities. The EPC is correctly configured and working because I can have data connection in my UE, I have also activated all the IMS options in the EPC: I have created the APN with ims identifier, the default carrier QCI assigned is 5 (for SIP signaling), the MME has activated the option to support IMS Voice over the PS session and the HSS and PCRF nodes are configured with the interfaces at the addresses and ports Cx-HSS 127.0.0.1:3868 and Cx-PCRF 10.11.0.35:3868 . There are several parameters that I do not know if it is necessary to activate, for example, in the PCRF the customization of the QCI for the media type, if I must include the OCS and OFCS as nodes, or if in the profile of my APN I must include authentication by PDN AAA. The configuration I use for the IMS is as follows: imsrealm = net1.test imsport = 5060 pcscfgmip = 10.77.0.35 pcscfgmipintf = eth6 pcscfrxip = 10.102.81.111 pcscfrxipintf = eth1 icscfmwip = 127.0.0.21 icscfmwipintf = lo:21 icscfcxip = 127.0.0.20 icscfcxipintf = lo:20 scscfmwip = 127.0.0.23 scscfmwipintf = lo:23 scscfcxip = 127.0.0.22 scscfcxipintf = lo:22 audiobandwidth = 64 videobandwidth = 128 epcrealm = epc.mnc001.mcc001.3gppnetwork.org pcrfhost = pcrf2.morsecore pcrfrxip = 10.11.0.35 pcrfrxport = 3868 hsshost = hss6.morsecore hsscxdxip = 127.0.0.1 hsscxdxport = 3868 Both cores are running on the same machine but I have disabled the option of PCRF Co-located with IMS to be able to edit the pcrf host name since if I enable it it does not reach the peer pcrf.localhost even if the DNS is well configured. My UE is not able to launch the REGISTER by itself when it is going to make a call, so I am using the Google IMSDroid application to be able to launch the SIP requests and check the operation of the IMS. In the application of the UE the configuration is as follows: Identity: Alice Public Identity: sip:<MSISDN>@net1.test (MSISDN=8800000451 configurado previamente en el EPC) Private Identity: sip:<IMSI>@net1.test (IMSI incluyendo MCC y MNC) Password: alice Realm: net1.test (Aunque no sé si debo poner aquí epc.mnc001.mcc001.3gppnetwork.org, pero entonces la petición da error) Network: Proxy-CSCF Host: 10.77.0.35:5060 Transport UDP and NO Proxy-CSCF discovery. So, I launch my request and the log of the P-CSCF node is as follows: Aug 2 12:50:04 morsecore kamailio[53656]: INFO: <script>: REGISTER (sip:8800000451@net1.test (10.77.0.196:37651) to sip:8800000451@net1.test, 76203fe6-1d8f-bcba-c9ab-4050ac0d8cc8) Aug 2 12:50:04 morsecore kamailio[53656]: INFO: cdp [authstatemachine.c:200]: auth_client_statefull_sm_process(): after callback of event 1 Aug 2 12:50:04 morsecore kamailio[53802]: INFO: cdp [authstatemachine.c:200]: auth_client_statefull_sm_process(): after callback of event 7 Aug 2 12:50:04 morsecore kamailio[53655]: INFO: <script>: REGISTER (sip:8800000451@net1.test (10.77.0.196:37651) to sip:8800000451@net1.test, 76203fe6-1d8f-bcba-c9ab-4050ac0d8cc8) Aug 2 12:50:05 morsecore kamailio[53664]: INFO: <script>: REGISTER (sip:8800000451@net1.test (10.77.0.196:37651) to sip:8800000451@net1.test, 76203fe6-1d8f-bcba-c9ab-4050ac0d8cc8) Aug 2 12:50:07 morsecore kamailio[53659]: INFO: <script>: REGISTER (sip:8800000451@net1.test (10.77.0.196:37651) to sip:8800000451@net1.test, 76203fe6-1d8f-bcba-c9ab-4050ac0d8cc8) Aug 2 12:50:11 morsecore kamailio[53666]: INFO: <script>: REGISTER (sip:8800000451@net1.test (10.77.0.196:37651) to sip:8800000451@net1.test, 76203fe6-1d8f-bcba-c9ab-4050ac0d8cc8) I understand that everything is correct until now, but in the I-CSCF node it appears: Aug 2 12:50:04 morsecore kamailio[53397]: INFO: ims_icscf [cxdx_uar.c:71]: create_uaa_return_code(): created AVP successfully : [uaa_return_code] Aug 2 12:50:04 morsecore kamailio[53465]: INFO: ims_icscf [cxdx_avp.c:137]: cxdx_get_avp(): cxdx_get_server_name: Failed finding avp Aug 2 12:50:04 morsecore kamailio[53465]: INFO: ims_icscf [cxdx_avp.c:137]: cxdx_get_avp(): cxdx_get_capabilities: Failed finding avp Aug 2 12:50:04 morsecore kamailio[53465]: INFO: ims_icscf [cxdx_avp.c:137]: cxdx_get_avp(): cxdx_get_result_code: Failed finding avp Aug 2 12:50:04 morsecore kamailio[53465]: ERROR: ims_icscf [cxdx_uar.c:152]: async_cdp_uar_callback(): RC_IMS_DIAMETER_ERROR_USER_UNKNOWN Aug 2 12:50:04 morsecore kamailio[53465]: INFO: ims_icscf [cxdx_uar.c:71]: create_uaa_return_code(): created AVP successfully : [uaa_return_code] Aug 2 12:50:04 morsecore kamailio[53465]: ERROR: <script>: UAR failure - error response sent from module Where I believe that the REGISTER message is not even forwarded, however it seems that it gives an error that the user is unknown or not registered but if I access the MySQL database, the registered users are: +----+------------+-----------+----------+---------------+----------------------------------+----------------------------------+------+ | id | username | domain | password | email_address | ha1 | ha1b | rpid | +----+------------+-----------+----------+---------------+----------------------------------+----------------------------------+------+ | 1 | alice | net1.test | alice | | 91cc8c652ef5f37e91c468c7319d0086 | 044776963e2661788e8db076b393333e | NULL | | 2 | bob | net1.test | bob | | 6ef7f9c924f1385d83cf22cbb94cfbbb | 0d893d2d8c10a044b918e4bd73b6bee5 | NULL | | 3 | 8800000451 | net1.test | alice | | 46811c4e58f298953a6f9efccf6c32f1 | 49c7a7ad84fe797fbefa2185be4cd226 | NULL | +----+------------+-----------+----------+---------------+----------------------------------+----------------------------------+------+ However, I do not know if it is accessing the mounted MySQL database or accessing the HSS and on this node, in the databases it does not contain the user (although it must be because it is registered in the network correctly). In case it works, this is the trace of wireshark filtered by the protocols S1AP, SIP and Diameter just when a REGISTER request is launched: "596","2019-08-02 12:50:00.705985000","127.0.0.20","127.0.0.1","DIAMETER","130","cmd=Device-Watchdog Request(280) flags=R--- appl=Diameter Common Messages(0) h2h=fedcb89 e2e=4df0bbf5 | " "597","2019-08-02 12:50:00.706133000","127.0.0.1","127.0.0.20","DIAMETER","210","cmd=Device-Watchdog Answer(280) flags=---- appl=Diameter Common Messages(0) h2h=fedcb89 e2e=4df0bbf5 | " "599","2019-08-02 12:50:00.786878000","127.0.0.22","127.0.0.1","DIAMETER","130","cmd=Device-Watchdog Request(280) flags=R--- appl=Diameter Common Messages(0) h2h=fedcb89 e2e=4df0bbf5 | " "600","2019-08-02 12:50:00.787019000","127.0.0.1","127.0.0.22","DIAMETER","210","cmd=Device-Watchdog Answer(280) flags=---- appl=Diameter Common Messages(0) h2h=fedcb89 e2e=4df0bbf5 | " "602","2019-08-02 12:50:00.914405000","10.102.81.111","10.11.0.35","DIAMETER","130","cmd=Device-Watchdog Request(280) flags=R--- appl=Diameter Common Messages(0) h2h=fedcb89 e2e=4df0bbf5 | " "603","2019-08-02 12:50:00.914549000","10.11.0.35","10.102.81.111","DIAMETER","214","cmd=Device-Watchdog Answer(280) flags=---- appl=Diameter Common Messages(0) h2h=fedcb89 e2e=4df0bbf5 | " "622","2019-08-02 12:50:04.027238000","10.77.0.196","10.77.0.35","GTP <SIP>","1034","Request: REGISTER sip:net1.test (1 binding) | " "623","2019-08-02 12:50:04.027347000","10.77.0.196","10.77.0.35","GTP <SIP>","1034","Request: REGISTER sip:net1.test (1 binding) | " "624","2019-08-02 12:50:04.027448000","10.77.0.196","10.77.0.35","SIP","998","Request: REGISTER sip:net1.test (1 binding) | " "625","2019-08-02 12:50:04.028850000","10.102.81.111","10.11.0.35","DIAMETER","426","cmd=AA Request(265) flags=RP-- appl=3GPP Rx(16777236) h2h=fedcb8a e2e=4df0bbf6 | " "626","2019-08-02 12:50:04.029862000","10.11.0.35","10.102.81.111","DIAMETER","350","cmd=AA Answer(265) flags=-P-- appl=3GPP Rx(16777236) h2h=fedcb8a e2e=4df0bbf6 | " "630","2019-08-02 12:50:04.031113000","10.77.0.35","127.0.0.21","SIP","1280","Request: REGISTER sip:net1.test (1 binding) | " "631","2019-08-02 12:50:04.031794000","127.0.0.21","10.77.0.35","SIP","440","Status: 100 Trying | " "632","2019-08-02 12:50:04.032382000","127.0.0.20","127.0.0.1","DIAMETER","354","cmd=User-Authorization Request(300) flags=RP-- appl=3GPP Cx(16777216) h2h=fedcb8a e2e=4df0bbf6 | " "633","2019-08-02 12:50:04.033101000","127.0.0.1","127.0.0.20","DIAMETER","298","cmd=User-Authorization Answer(300) flags=-P-- appl=3GPP Cx(16777216) h2h=fedcb8a e2e=4df0bbf6 | " "636","2019-08-02 12:50:04.033557000","127.0.0.21","10.77.0.35","SIP","504","Status: 403 Forbidden - HSS User Unknown | " I don't know if any information or configuration details are missing but I can attach it at any time without any problem. Regards and thank you very much in advance, Javier Espinosa.

2 3

Kamailio Process CPU 100%
by M. Salman 05 Aug '19

05 Aug '19

Hi Team, Facing 100% Kamilio CPU issue, here are the details, any pointers/hints would help. Thanks *Scenario:* Random Kamailio CPU shoot, restart fixes it. Happens once or twice in a day. It's a pre-production server with around 30 extensions, not much load. For now, it has 2 CPUs and 4 G memory. *[Info]* uname -a Linux ip-X-aws #46-Ubuntu SMP Thu Jul 4 13:38:28 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux kamailio -V version: kamailio 5.2.3 (x86_64/linux) c36229 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: c36229 *(gdb) bt full* #0 0x00007f0069d97aab in ?? () from /usr/lib/x86_64-linux-gnu/libmysqlclient.so.20 No symbol table info available. #1 0x00007f0069d7d6bd in ?? () from /usr/lib/x86_64-linux-gnu/libmysqlclient.so.20 No symbol table info available. #2 0x00007f0069d657c7 in ?? () from /usr/lib/x86_64-linux-gnu/libmysqlclient.so.20 No symbol table info available. #3 0x00007f0069d3ebce in ?? () from /usr/lib/x86_64-linux-gnu/libmysqlclient.so.20 No symbol table info available. #4 0x00007f0069d3fc4c in ?? () from /usr/lib/x86_64-linux-gnu/libmysqlclient.so.20 No symbol table info available. #5 0x00007f0069d33edc in ?? () from /usr/lib/x86_64-linux-gnu/libmysqlclient.so.20 No symbol table info available. #6 0x00007f0069d34fa8 in ?? () from /usr/lib/x86_64-linux-gnu/libmysqlclient.so.20 No symbol table info available. #7 0x00007f0069d36d71 in mysql_real_query () from /usr/lib/x86_64-linux-gnu/libmysqlclient.so.20 No symbol table info available. #8 0x00007f006a31e4b4 in db_mysql_submit_query (h=0x7f006a6cdb20, s=0x7f0069af92d0 <sql_str>) at km_dbase.c:116 t = 1564528172 i = 0 code = 0 _func_ = "db_mysql_submit_query" #9 0x00007f00698e8fb3 in db_do_submit_query (h=0x7f006a6cdb20, query=0x7f0069af92d0 <sql_str>, submit_query=0x7f006a31dd3c <db_mysql_submit_query>) at db_query.c:58 ret = 10 tvb = {tv_sec = 0, tv_usec = 0} tve = {tv_sec = 0, tv_usec = 2077076196242373120} tz = {tz_minuteswest = 0, tz_dsttime = 0} tdiff = 0 _func_ = "db_do_submit_query" #10 0x00007f00698ec1dc in db_do_delete (h=0x7f006a6cdb20, k=0x7ffcdb440fa0, o=0x0, v=0x7ffcdb440fb0, _n=2, val2str=0x7f006a340429 <db_mysql_val2str>, submit_query=0x7f006a31dd3c <db_mysql_submit_query>) at db_query.c:299 off = 68 ret = 36 ---Type <return> to continue, or q <return> to quit--- _func_ = "db_do_delete" #11 0x00007f006a322f6a in db_mysql_delete (h=0x7f006a6cdb20, k=0x7ffcdb440fa0, o=0x0, v=0x7ffcdb440fb0, _n=2) at km_dbase.c:515 No locals. #12 0x00007f0065b6da70 in remove_dialog_from_db (cell=0x7f005c5ed3d8) at dlg_db_handler.c:722 values = {{type = DB1_INT, nul = 0, free = 477963473, val = {int_val = 1460, ll_val = 140720308487604, double_val = 6.9525070095907518e-310, time_val = 140720308487604, string_val = 0x7ffc000005b4 <error: Cannot access memory at address 0x7ffc000005b4>, str_val = { s = 0x7ffc000005b4 <error: Cannot access memory at address 0x7ffc000005b4>, len = 0}, blob_val = { s = 0x7ffc000005b4 <error: Cannot access memory at address 0x7ffc000005b4>, len = 0}, bitmap_val = 1460, uint_val = 1460, ull_val = 140720308487604}}, {type = DB1_INT, nul = 0, free = 0, val = {int_val = 8020, ll_val = 139637976735572, double_val = 6.899032715982534e-310, time_val = 139637976735572, string_val = 0x7f0000001f54 <error: Cannot access memory at address 0x7f0000001f54>, str_val = { s = 0x7f0000001f54 <error: Cannot access memory at address 0x7f0000001f54>, len = 0}, blob_val = { s = 0x7f0000001f54 <error: Cannot access memory at address 0x7f0000001f54>, len = 0}, bitmap_val = 8020, uint_val = 8020, ull_val = 139637976735572}}} match_keys = {0x7f0065dfc6c0 <h_entry_column>, 0x7f0065dfc6b0 <h_id_column>} vars_match_keys = {0x7f0065dfc7f0 <vars_h_entry_column>, 0x7f0065dfc7e0 <vars_h_id_column>} _func_ = "remove_dialog_from_db" #13 0x00007f0065b49375 in destroy_dlg (dlg=0x7f005c5ed3d8) at dlg_hash.c:371 ret = 1 var = 0x7f0065b45442 <futex_get+40> _func_ = "destroy_dlg" #14 0x00007f0065b50ca0 in dlg_unref_helper (dlg=0x7f005c5ed3d8, cnt=2, fname=0x7f0065be1eff "dlg_handlers.c", fline=1182) at dlg_hash.c:961 d_entry = 0x7f005c45b4c0 _func_ = "dlg_unref_helper" #15 0x00007f0065b7f708 in unref_dlg_from_cb (t=0x7f005c5b5dc0, type=131072, param=0x7ffcdb4412a0) at dlg_handlers.c:1182 dlg = 0x7f005c5ed3d8 iuid = 0x7f005c568c38 #16 0x00007f0068295b05 in run_trans_callbacks_internal (cb_lst=0x7f005c5b5e38, type=131072, trans=0x7f005c5b5dc0, params=0x7ffcdb4412a0) at t_hooks.c:260 cbp = 0x7f005c606118 backup_from = 0x5569cc3da8b0 <def_list+16> backup_to = 0x5569cc3da8b8 <def_list+24> ---Type <return> to continue, or q <return> to quit--- backup_dom_from = 0x5569cc3da8c0 <def_list+32> backup_dom_to = 0x5569cc3da8c8 <def_list+40> backup_uri_from = 0x5569cc3da8a0 <def_list> backup_uri_to = 0x5569cc3da8a8 <def_list+8> backup_xavps = 0x5569cc3da2c0 <_xavp_list_head> _func_ = "run_trans_callbacks_internal" #17 0x00007f0068295c2c in run_trans_callbacks (type=131072, trans=0x7f005c5b5dc0, req=0x0, rpl=0x0, code=0) at t_hooks.c:287 params = {req = 0x0, rpl = 0x0, param = 0x7f005c606128, code = 0, flags = 0, branch = 0, t_rbuf = 0x0, dst = 0x0, send_buf = { s = 0x0, len = 0}} #18 0x00007f00681cbf45 in free_cell_helper (dead_cell=0x7f005c5b5dc0, silent=0, fname=0x7f00682de882 "timer.c", fline=689) at h_table.c:166 b = 0x7f005c5b5dc0 "" i = 1 rpl = 0x7ffcdb4413a0 tt = 0x0 foo = 0x7ffcdb441390 cbs = 0x7f005c378700 cbs_tmp = 0x1681ca80f _func_ = "free_cell_helper" #19 0x00007f0068283bf6 in wait_handler (ti=855479619, wait_tl=0x7f005c5b5e48, data=0x7f005c5b5dc0) at timer.c:689 p_cell = 0x7f005c5b5dc0 ret = 1 unlinked = 0 rcount = 1 _func_ = "wait_handler" #20 0x00005569cbdb0661 in timer_list_expire (t=855479619, h=0x7f005c238af0, slow_l=0x7f005c23ae08, slow_mark=5646) at core/timer.c:874 tl = 0x7f005c5b5e48 ret = 0 #21 0x00005569cbdb0b09 in timer_handler () at core/timer.c:939 saved_ticks = 855479619 run_slow_timer = 0 i = 526 _func_ = "timer_handler" #22 0x00005569cbdb0fd2 in timer_main () at core/timer.c:978 ---Type <return> to continue, or q <return> to quit--- No locals. #23 0x00005569cbcf1382 in main_loop () at main.c:1727 i = 8 pid = 0 si = 0x0 si_desc = "udp receiver child=7 sock=172.31.2.33:6000 ( 13.54.252.29:6000)\000\034\004\000\000\000\000\000\000\000\321$}\034\000\000\000\000P0\316\313iU\000\000 \031D\333\374\177", '\000' <repeats 18 times>, "`\026D\333\374\177\000\000\360S\361\313iU\000" nrprocs = 8 woneinit = 1 _func_ = "main_loop" #24 0x00005569cbcf8a7b in main (argc=13, argv=0x7ffcdb441928) at main.c:2696 cfg_stream = 0x5569cd7c7260 c = -1 r = 0 tmp = 0x7ffcdb441f39 "" tmp_len = -616294480 port = 32764 proto = 3 options = 0x5569cc074190 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 3114863458 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x7f006af01787 p = 0x9c0 <error: Cannot access memory at address 0x9c0> st = {st_dev = 23, st_ino = 456, st_nlink = 2, st_mode = 16877, st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 60, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1564229247, tv_nsec = 809557407}, st_mtim = {tv_sec = 1564229229, tv_nsec = 217250917}, st_ctim = {tv_sec = 1564229279, tv_nsec = 666090748}, __glibc_reserved = {0, 0, 0}} _func_ = "main" (gdb) -- Regards M. Salman

3 4

alias="server" from db?
by David Villasmil 05 Aug '19

05 Aug '19

Hello guys, I can't find a module that does this, i want to load my hostname aliases from db, instead of alias="host1:5060" alias="host2:5060" alias="host3:5060" I assume it is possible, but how? first time i need to implement this Thanks! Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

3 6

Re: [SR-Users] Kamailio v5.2 kamctl alias add problem
by Igor Potjevlesch 04 Aug '19

04 Aug '19

Hi kamailio Users, I meet a problem with the " kamctl alias add" command in the 5.2 version, I saw that the module used to add an alias had changed, and now the command result with an error : [kamailio]# kamctl alias add XXXX@XXXX sip:XXXXX@XXXX { "jsonrpc": "2.0", "error": { "code": 500, "message": "Not enough parameters or wrong format" }, "id": XXXXX } So in the version 5.2, the table aliasdb replace the table alias ? We are using the table alias for the incomming call, and we implemented scripts to add with the command kamctl alias add the information needed in the tavble alias to route the call. But since the version 5.2 we need to add an argument "path" in this command, and we don't know how to put it at "NULL" or how we can use this argument ? Can you help us with this? Bests Regards Igor Le ven. 5 juil. 2019 à 16:57, Igor Potjevlesch <igor.potjevlesch(a)gmail.com> a écrit : > Hi Daniel-Constantin, > > So in the version 5.2, the table aliasdb replace the table alias ? > We are using the table alias for the incomming call, and we implemented > scripts to add with the command kamctl alias add the information needed in > the tavble alias to route the call. > But since the version 5.2 we need to add an argument "path" in this > command, and we don't know how to put it at "NULL" or how we can use this > argument ? > > Can you help us with this? > > Bests Regards > >>

3 3

Reverse Proxy Asterisk - SIP Provider
by Mihai Cezar 04 Aug '19

04 Aug '19

Hi all, I've tried to create a reverse proxy to forward incoming request that came from SIP provider to Asterisk PBX and forward the requests from asterisk to kamailio then sip provider. What i get is that I see the invite, but is like no ACK. Thanks in advance. M kamailio.cfg: #!KAMAILIO # ####### Defined Values ######### # - flags # FLT_ - per transaction (message) flags # FLB_ - per branch flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 ####### Global Parameters ######### ### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR debug=3 log_stderror=yes memdbg=5 memlog=5 log_facility=LOG_LOCAL0 log_prefix="{$mt $hdr(CSeq) $ci} " children=1 server_id = 10 xavp_via_params = "via" disable_tcp=yes auto_aliases=no listen=udp:0.0.0.0:5060 ####### Modules Section ######## loadmodule "jsonrpcs.so" loadmodule "kex.so" loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule "acc.so" loadmodule "counters.so" # ----------------- setting module-specific parameters --------------- # ----- jsonrpcs params ----- modparam("jsonrpcs", "pretty_format", 1) modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamailio_rpc.fifo") modparam("jsonrpcs", "dgram_socket", "/var/run/kamailio/kamailio_rpc.sock") modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_ctl") # ----- tm params ----- modparam("tm", "failure_reply_mode", 3) modparam("tm", "fr_timer", 30000) modparam("tm", "fr_inv_timer", 120000) modparam("rr", "enable_full_lr", 0) modparam("rr", "append_fromtag", 0) modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) modparam("acc", "detect_direction", 0) modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) ####### Routing Logic ######## request_route { # per request initial checks route(REQINIT); # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) { route(RELAY); } exit; } # handle retransmissions if (!is_method("ACK")) { if(t_precheck_trans()) { t_check_trans(); exit; } t_check_trans(); } # handle requests within SIP dialogs route(WITHINDLG); # record routing for dialog forming requests (in case they are routed) remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE|REFER")) { record_route(); } # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); sl_send_reply("100","Trying"); if ($si == "172.16.16.1") { sl_send_reply("183","Incoming session from Avoxi"); rewritehost("10.1.1.10"); #exit; } else if ($si == "10.1.1.10"){ # receiving response from client sl_send_reply("183","Outgoing session to Avoxi"); #rewritehost("172.16.16.1"); drop; exit; } else { sl_send_reply("500","No configured IP!"); drop; exit; } } if ($rU==$null) { sl_send_reply("484","Address Incomplete"); exit; } # received from main server - send to client and add via tokens for anycast handling via_add_srvid("1"); $xavp(via=>node) = "10.1.1.4"; via_add_xavp_params("1"); route(RELAY); exit; } # Wrapper for relaying requests route[RELAY] { # enable additional event routes for forwarded requests # - serial forking, RTP relaying handling, a.s.o. if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH"); } if (is_method("INVITE|SUBSCRIBE|UPDATE")) { if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY"); } if (is_method("INVITE")) { if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE"); } if (!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial checks route[REQINIT] { if($ua =~ "friendly-scanner|sipcli|VaxSIPUserAgent") { # silent drop for scanners - uncomment next line if want to reply sl_send_reply("200", "OK"); exit; } if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(is_method("OPTIONS") && uri==myself && $rU==$null) { sl_send_reply("200","Keepalive"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } if ($si == "10.1.1.4") { xlog("L_WARN", "$ci|end|dropping message"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (!has_totag()) return; if (loose_route()) { if (is_method("BYE")) { setflag(FLT_ACC); setflag(FLT_ACCFAILED); } else if ( is_method("NOTIFY") ) { record_route(); } route(RELAY); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { route(RELAY); exit; } else { exit; } } sl_send_reply("400","Loop detected"); exit; } # TM manage for outgoing branches branch_route[MANAGE_BRANCH] { xdbg("new branch [$T_branch_idx] to $ru\n"); } # TM manage for incoming replies onreply_route[MANAGE_REPLY] { xdbg("incoming reply\n"); } # TM manage for failure routing cases failure_route[MANAGE_FAILURE] { if (t_is_canceled()) exit; } asterisk - sip.conf [opensips-trunk](sip-provider) fromdomain=10.1.1.10 host=10.1.1.4 context=from-trunk type=friend insecure=invite,port trunk=yes

4 9

Kamailio OPTIONS Round-Trip
by Eugeniu Istrati 04 Aug '19

04 Aug '19

I'm interested in this feature too, would it be available in the 5.3 release? Thank you. -- Eugeniu Istrati

2 1

location table
by Maryam Baghdadi 03 Aug '19

03 Aug '19

Hello How can I save subscribers information in location table? why after calling save("location") in configuration file , still location table is empty?

2 1

(no subject)
by jay binks 02 Aug '19

02 Aug '19

Hey all, looking for a little help. I've been tracking an issue, where a number of SIP Messages ( typically INVITE ) are sent, but Kamailio only see one of them ( the last one). I have verified that the messages are definitely received on the host, as verified with TCPDUMP, but the INVITES never hit the request route block. ( the very first thing is to log the message ) What i've managed to find is, that if I increase worker children, the problem goes away. So I've got a problem, I think I've found the solution, but what I'm struggling with is how to monitor better, so I can be alerted to this in the future. I started by looking at "kamctl stats | grep drop" "core:drop_replies = 14", "core:drop_requests = 10577" however drop_requests seems to include explicit drops in my config. which I do for many reasons, but mainly bad UA or blocked IP's, so this dosnt seem to be what im after. I then went digging in the code ( often the best way to find things ). in receive.c receive_msg() we find some conditions, where we drop the packet ( before calling request route ). right now im looking around line 251 at LM_DBG("dropping the received message\n"); goto error00; Following error00 I see it calls STATS_RX_DROPS which increments stats->received_drops. This is where it gets fun, I cant find where received_drops is ever returned in the stats output. I can see where -SIGUSR1 will trigger this to be dumped, if Kamailio is compiled with that option ( dosnt seem the debian packages are ). however, what im seeking clarification on is, does this get reported in "kamctl stats" Am I just going crazy or is something not quite right here? TLDNR; how do I monitor for Kamailio not having enough worker threads to process incoming messages. FYI I'm seeing about 50Mbps of incoming SIP on this box, and I do perform a decent amount of work on some message types. -- Sincerely Jay

5 7

Deleting extra location attribute(location_attrs table) when contact is expired
by Pintu Lohar 31 Jul '19

31 Jul '19

Hi All, Regarding modparam("tm|usrloc", "xavp_contact", "ulattrs") #ref : https://www.kamailio.org/docs/modules/devel/modules/usrloc.html#usrloc.p.xa… . There is some requirement where we need to save some extra location attributes to location_attrs <https://kamailio.org/docs/db-tables/kamailio-db-4.3.x.html#gen-db-location-…> tables $xavp(ulattrs=>deviceIdentify)= "Some str values" and calling save(“location”) , It works well and saved location attribute table but But when contact expired callback is received, udomain_contact_expired_db() does not it delete the extra location attribute from database but deleting the record from location table only ? If not, is there any recommended approach to delete the extra location attributes from the database? or am I missing something to set? Alternate I was thinking could be running timer from Kamailio config and check last_modified time and delete those(based on our UAC expiry setting), is it the right approach. Kamailio Version: 5.2.0. Thanks for your valuable suggestion in advance. Regards Pintu Lohar

2 10

Register without user create
by José Antonio Gutiérrez Delgado 29 Jul '19

29 Jul '19

Hello, I would like to know if it is possible to enable registration for users that have not been created with kamctl. For example, if I can register a user with a random name without a password, or obtain from another database other than kamailio; I would also like it to be allowed at the same time as there are users with password registered with kamctl. Thanks you, José Antonio Gutiérrez Delgado Responsable técnico Oficina: (+34) 923040031 <http://www.arsoft-company.com> *De conformidad a lo establecido en el REGLAMENTO (UE) 2016/679 DEL PARLAMENTO EUROPEO Y DEL CONSEJO de 27 de abril de 2016 relativo a la protección de las personas físicas en lo que respecta al tratamiento de datos personales y a la libre circulación de estos datos y por el que se deroga la Directiva 95/46/CE (Reglamento general de protección de datos), le informamos que todos los datos pasaran a formar parte de un fichero automatizado cuyo responsable es AUGMENTED REALITY SOFTWARE S.L siendo la única finalidad de dicho fichero la gestión de carácter comercial y el posible envío de comunicaciones comerciales sobre nuestros productos. Si lo desea puede ejercer sus derechos de acceso, rectificación, cancelación y oposición de sus datos en C/ Duero 12, Parque Científico, ARSOFT, 37185 o enviando un mensaje electrónico a info(a)arsoft-company.com <info(a)arsoft-company.com> indicando en el asunto el derecho que desea ejercitar.Este mensaje y sus archivos adjuntos van dirigidos exclusivamente a su destinatario, pudiendo contener información confidencial sometida a secreto profesional. No está permitida su reproducción o distribución sin nuestra autorización expresa. Si usted no es el destinatario final por favor elimínelo e infórmenos por esta vía.*

3 4

Dialog missing when BYE is received from trunk
by Andrew White 28 Jul '19

28 Jul '19

Hi all, I’ve got a call flow where PBX makes a call via Kamailio, which uses the UAC modules to make the call to the trunk. This works great, however I’ve noticed recently that when the BYE comes from the trunk, Kamailio doesn’t recognise the dialog and throws back a 404. Due to this, the PBX never knows the session has ended, and keeps its session open. Here’s the flow from Wireshark: https://i.imgur.com/BxPRrXP.png <https://i.imgur.com/BxPRrXP.png> As you can see, the BYE is received from the trunk, and Kamailio throws a 404. I checked with an rpc dlg.list and at this point the dialog had gone. 30 seconds later, I threw a BYE from the PBX, and because the dialog no longer existed, it got a 481 back. The INVITE to the trunk has the following Record-Route header: Record-Route: <sip:kamailio.public-ip;lr;ftag=mjKtcKaBteQ4Q;vst=AAAAAAYFBQUHAwYHBgRzMwIRGRMcAgJBWBEVCwAbBhtADxBjdGVkLmNvbS5hdQ--;did=624.b2e1> When the first BYE comes in, it still has same did in the Route header. Below I’ve put the output from the dialog list rpc call (before the first BYE) and the relevant log lines. { h_entry: 1062 h_id: 7723 ref: 2 call-id: a9d32620-2b68-1238-048a-0cc47a18705a from_uri: sip:61400123123@pbx.local:5060 to_uri: sip:61400123123@10.0.0.2 state: 4 start_ts: 1564269942 init_ts: 1564269929 end_ts: 0 timeout: 1564313142 lifetime: 43200 dflags: 643 sflags: 0 iflags: 16 caller: { tag: mjKtcKaBteQ4Q contact: sip:pbx.local cseq: 7581172 route_set: socket: udp:10.0.0.2:5060 } callee: { tag: SD5ptp899-1177933201-1564269931305 contact: sip:SDd3mt8-nn9jnirnmqcrvfmvkpm0hmhvgggjgv2io788of70s84u9@trunk.remote:5060;transport=udp cseq: 0 route_set: socket: udp:10.0.0.2:5060 } profiles: { } variables: { { cseq_diff: 1 } } } Jul 28 09:27:30 ip-10-0-0-2 /usr/local/sbin/kamailio[11061]: NOTICE: {2 450917085 BYE a9d32620-2b68-1238-048a-0cc47a18705a} acc [acc.c:279]: acc_log_request(): ACC: transaction answered: timestamp=1564270050;method=BYE;from_tag=SD5ptp899-1177933201-1564269931305;to_tag=mjKtcKaBteQ4Q;call_id=a9d32620-2b68-1238-048a-0cc47a18705a;code=404;reason=Not here;src_user=0400123123;src_domain=trunk.remote;src_ip=trunk.remote;dst_ouser=0400123123;dst_user=0400123123;dst_domain=kamailio.public-ip I’m assuming the 404 is because the Contact header I sent from Kamailio -> Trunk is rewritten, that Contact is Kamailio’s public contact IP. However the dialog has the caller contact within it referencing back to the local PBX, so I would think when Kamailio gets this dialog ID back with a BYE it would relay it back to the original contact, wouldn’t it? Thanks! Andrew

2 3

IMS_ISC technical specification
by Ali Shirvani 26 Jul '19

26 Jul '19

Hi all, I read some portion of imc_isc_mod.c, specially isc_from_as function. In that function there is some function call that searching for some marks in the SIP message. Also I read section 5.7.3 from TS 24.229 but I didn't find the marking mechanism that used in isc_from_as function. Would you please point me to the technical specification that implemented in IMS_ISC module? Regards, Ali

3 4

Concatenating strings in $hdr
by David Cunningham 26 Jul '19

26 Jul '19

Hello, I'm having an issue where this doesn't work: #!trydef PRODUCT "Foo" if( $hdr("X-" + PRODUCT + "-Transport") != "" ) { add_uri_param( $hdr("X-" + PRODUCT + "-Transport") ); } It seems Kamailio doesn't like the concatenation within the $hdr(). Concatenation does work in other places though: append_hf( "X-" + PRODUCT + "-Transport: tcp\r\n" ); Can anyone advise how to make the concatenation within $hdr() work? Thanking you in advance. -- David Cunningham, Voisonics Limited http://voisonics.com/ USA: +1 213 221 1092 New Zealand: +64 (0)28 2558 3782

2 2

IM Chat facility in Kamailio
by Gaurav Bmotra 25 Jul '19

25 Jul '19

hi i m using kamailio 5.1.2 , on Ubuntu 18. LTS existing setup is working fine with audio and video call ,,, ut now i wan to add chat feature in it ... so plz help me how can i implement chat IM in to it thanks -- *Regards:* Gaurav Kumar

2 1

Malformed Route Header
by Duarte Rocha 25 Jul '19

25 Jul '19

Greetings, When a in-dialog request has Route headers, Kamailio will remove the Route Header with it's address when routing the packet. This works perfectly for me in every situation. However, in one of the calls I found a weird behaviour in the removal. So, this is the scenario : Kamailio has two IP's 1.1.1.209 and 1.1.1.205. This is BYE request received in the on 1.1.1.209 The header Route looks like this when it arrives at 1.1.1.209 : Route : <sip:1.1.1.209;r2=on;lr;ftag=5AE0303037363132017D0E65;tbk_i=2_2_Y;tbk_o=128_11_Y;vsf=AAAAABgGBAMDAAUBBQECA3ByAwMcHwIdHQsWHwUMOA--;vst=AAAAABgHDQgBAwsIBQECdnIDAxwfAh0aBB4cAgU5;did=8f5.67c2>,<sip:1.1.1.205;r2=on;lr;ftag=5AE0303037363132017D0E65;tbk_i=2_2_Y;tbk_o=128_11_Y;vsf=AAAAABgGBAMDAAUBBQECA3ByAwMcHwIdHQsWHwUMOA--;vst=AAAAABgHDQgBAwsIBQECdnIDAxwfAh0aBB4cAgU5;did=8f5.67c2> It reaches 1.1.1.205 like this : Route : As you can see, the header is empty and it should contain the 1.1.1.205 URI. Is the header Router malformatted and creating this error ? Best Regards, Duarte Rocha

2 1

Re: [SR-Users] [EXT] Re: P-CSCF and I-CSCF ports -RESOLVED
by Woscek, Martin W. 24 Jul '19

24 Jul '19

Hi Ali, Looking through the source code, its not that the port for I-CSCF is hard coded to 5060, its just that it defaults to 5060 if the following is set in the Kamailio.cfg file: dns_try_naptr=no which we had left it disabled. Well I assumed I had all the DNS worked out, I had NAPTR records set for the P,I and S-CSCF. Looking though the pcscf.cfg there is a setting for NETWORKNAME which is set to ims522.ims.org, and is a separate FQDN from the P,I,S-cscf FQDN’s. I always kept the NAPTR rec for ims522 as the same port of the P-CSCF (pcscf522) in DNS. Two things I needed to fix: 1. Enable the DNS NAPTR lookups: dns_try_naptr=yes 2. Modify the NAPR for ims522 to be that of 4060 Thanks to you and Amar for the pointing to DNS. _Martin From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Ali Shirvani Sent: Tuesday, July 23, 2019 1:40 PM To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org> Subject: [EXT] Re: [SR-Users] P-CSCF and I-CSCF ports Hi Martin, As Amar pointed out it may some DNS configuration. You can check the DNS entry of I-CSCF with: $ dig -t srv <FQDN of I-CSCF> Regards, Ali On Tue, Jul 23, 2019 at 7:15 PM Amar Tinawi <amar.tinawi(a)gmail.com<mailto:amar.tinawi@gmail.com>> wrote: Hello Martin I think you are missing the DNS part. On Tue, Jul 23, 2019, 5:30 PM Woscek, Martin W. <mwoscek(a)mitre.org<mailto:mwoscek@mitre.org>> wrote: Hi IMS users, I can configure the P-CSCF to use 5060, and the I-CSCF to use 4060 and both come up listening to their respective ports when each module is started. But the P-CSCF is hardcoded to use 5060 for the I-CSCF. Before I make code changes to the executable: Is there some additional configuration to allow for me to switch ports? Why is Kamailio IMS hardcoded and why not enforce it at the .cfg load time? Thanks, Martin _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

1 0

kamailio 4.4.4 fills IPv6 contact address when sending packet over IPv4
by Pali Rohár 24 Jul '19

24 Jul '19

Hi! I detected strange problem that sip.linphone.org refuse to accept presence information re-transmitted by kamailio 4.4.4 server. I debug this problem with tcpdump and I found out that problem is in kamailio which fills IPv6 address into UDP datagram and that datagram is sent via IPv4 socket to IPv4 address, to sip.linphone.org server. And sip.linphone.org server does not have IPv6 connectivity, so correctly return over IPv4 to sender just "400 Bad Contact Header" error. On my server is running kamailio 4.4.4 from Debian Stretch and I can 100% reproduce this problem against public sip.linphone.org server. My server has both IPv4 and IPv6 connectivity and kamailio is listening for both IPv4 and IPv6 connections. So why is kamailio sending IPv6 address over IPv4 and therefore makes it impossible to communicate with non-IPv6 enabled servers? Looks like a problem with choosing default/correct socket for Contact header. And how to fix this problem? Can you help me? I would like to have working interconnection with linphone servers. Just to note I'm seeing this problem only for presence information packets. Other requests, like INVITE or MESSAGE seems to work. Below is relevant tcpdump output. Some parts were replaced by {VAR}. PS: I'm not subscribed to list, so please CC my address when sending reply. Thank you! 17:22:58.121719 IP (tos 0x10, ttl 64, id 21629, offset 0, flags [none], proto UDP (17), length 1266) {MY_IPV4_ADDRESS}.5060 > 91.121.209.194.5060: [bad udp cksum 0xa099 -> 0x9825!] SIP, length: 1238 NOTIFY sip:{REMOTE_NAME}@{REMOTE_USER_IPV4_ADDRESS}:5060;registering_acc=sip_linphone_org SIP/2.0 Via: SIP/2.0/UDP {MY_IPV4_ADDRESS};branch=z9hG4bK2b55.88f93c20000000000000000000000000.0 To: <sip:{REMOTE_NAME}@sip.linphone.org>;tag=75559182 From: <sip:{MY_SIP_URI}>;tag=97d8e785fdf42bf9622a64c13c504961-2708 CSeq: 2 NOTIFY Call-ID: 26cf9d5c019af2dc3302b770887bcc2e@0:0:0:0:0:0:0:0 Route: <sip:91.121.209.194:5060;lr> Content-Length: 597 User-Agent: kamailio (4.4.4 (x86_64/linux)) Max-Forwards: 70 Event: presence Contact: <sip:{MY_IPV6_ADDRESS}:5060;transport=udp> Subscription-State: active;expires=3600 Content-Type: application/pidf+xml <?xml version="1.0" encoding="UTF-8"?> <presence xmlns="urn:ietf:params:xml:ns:pidf" xmlns:dm="urn:ietf:params:xml:ns:pidf:data-model" xmlns:rpid="urn:ietf:params:xml:ns:pidf:rpid" entity="Pali <sip:{MY_SIP_URI}>"> <tuple id="sg89ae"> <status><basic>open</basic></status> <contact priority="0.8">Pali <sip:{MY_SIP_URI}></contact> </tuple> <tuple xmlns="urn:ietf:params:xml:ns:pidf" id="TA0C538B2"> <status> <basic>closed</basic> </status> <contact priority="1">sip:{MY_SIP_URI}</contact> <timestamp>2019-04-19T17:20:36+02:00</timestamp> </tuple> </presence> 17:22:58.151188 IP (tos 0x0, ttl 52, id 22949, offset 0, flags [none], proto UDP (17), length 373) 91.121.209.194.5060 > {MY_IPV4_ADDRESS}.5060: [udp sum ok] SIP, length: 345 SIP/2.0 400 Bad Contact Header Via: SIP/2.0/UDP {MY_IPV4_ADDRESS};branch=z9hG4bK2b55.88f93c20000000000000000000000000.0;rport=5060 From: <sip:{MY_SIP_URI}>;tag=97d8e785fdf42bf9622a64c13c504961-2708 To: <sip:{REMOTE_NAME}@sip.linphone.org>;tag=75559182 Call-ID: 26cf9d5c019af2dc3302b770887bcc2e@0:0:0:0:0:0:0:0 CSeq: 2 NOTIFY Content-Length: 0 -- Pali Rohár pali.rohar(a)gmail.com

4 10

How to hook to Register And Unregister event in Kamailio
by Anuran Barman 24 Jul '19

24 Jul '19

Hi, I am integrating Kamailio into my application. I want to hook to the successful REGISTER and unregister event into Kamailio into my application. For now, I am able to hook into INVITE event and can hit my server to send a email to the callee user that user X is calling you. The way I am doing is by this if (is_method("INVITE")) { xlog("LOG_LOCAL3","L_INFO","invite came ($fU) ($tU)"); $var(res) = http_connect("sipnodejsserver", "/","text/plain","src_user:$fU,dst_user:$tU" ,"$avp(route)"); xlog("LOG_LOCAL3","L_INFO","request sent $avp(route) $var(res)"); setflag(FLT_ACC); # do accounting } I need to show into my application that their SIP phone is online or not. How can I hook into this?

4 24

Re: [SR-Users] [EXT] Re: P-CSCF and I-CSCF ports
by Woscek, Martin W. 23 Jul '19

23 Jul '19

DNS is fine. I flip the NAPTR records when I flip back and forth the 4060/5060 btwn the P and I. Martin Woscek The MITRE Corp. mwoscek(a)mitre.org<mailto:mwoscek@mitre.org> Phone: 703-983-2650 FAX: 703-983-7142 From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Ali Shirvani Sent: Tuesday, July 23, 2019 1:40 PM To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org> Subject: [EXT] Re: [SR-Users] P-CSCF and I-CSCF ports Hi Martin, As Amar pointed out it may some DNS configuration. You can check the DNS entry of I-CSCF with: $ dig -t srv <FQDN of I-CSCF> Regards, Ali On Tue, Jul 23, 2019 at 7:15 PM Amar Tinawi <amar.tinawi(a)gmail.com<mailto:amar.tinawi@gmail.com>> wrote: Hello Martin I think you are missing the DNS part. On Tue, Jul 23, 2019, 5:30 PM Woscek, Martin W. <mwoscek(a)mitre.org<mailto:mwoscek@mitre.org>> wrote: Hi IMS users, I can configure the P-CSCF to use 5060, and the I-CSCF to use 4060 and both come up listening to their respective ports when each module is started. But the P-CSCF is hardcoded to use 5060 for the I-CSCF. Before I make code changes to the executable: Is there some additional configuration to allow for me to switch ports? Why is Kamailio IMS hardcoded and why not enforce it at the .cfg load time? Thanks, Martin _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

1 0

P-CSCF and I-CSCF ports
by Woscek, Martin W. 23 Jul '19

23 Jul '19

Hi IMS users, I can configure the P-CSCF to use 5060, and the I-CSCF to use 4060 and both come up listening to their respective ports when each module is started. But the P-CSCF is hardcoded to use 5060 for the I-CSCF. Before I make code changes to the executable: Is there some additional configuration to allow for me to switch ports? Why is Kamailio IMS hardcoded and why not enforce it at the .cfg load time? Thanks, Martin

3 2

Debugging kamailio module
by Ali Shirvani 23 Jul '19

23 Jul '19

Hi all, I want to trace function calls in a kamailio module, e.g. ims_isc module. I installed kamailio-dbg package and started the kamailio with gdb: `gdb kamailio` I also set break point on target function, but it seems gdb doesn't stop on that break point. How should I start gdb and set break points? it seems gdb couldn't handle kamailio child processes that forked in start. Regards, Ali

2 2

unsubscribe
by Carlos Cruz 23 Jul '19

23 Jul '19

Unsubscribe --- This email has been checked for viruses by AVG. https://www.avg.com

2 1

unsubscribe
by Carlos Cruz 23 Jul '19

23 Jul '19

--- This email has been checked for viruses by AVG. https://www.avg.com

3 2

Two GWs with the same IP
by Duarte Rocha 22 Jul '19

22 Jul '19

Greetings, I'm building some testing procedures for my Kamailio proxy. In order to do that i have a SipTester (Acting as Calling Number) from where i want to originate calls to Kamailio. After Kamailio processes the call, i want it to route it to SipTester again so it can act as Called Number. This should work with only one SipTester in one machine, so i created two SipTester GW's on Kamailio, belonging to different users and GW groups. Also, the two GWs use different Kamailio addresses to communicate with the proxy. However, in this combination, when routing i get this error " ERROR: dialog [dlg_handlers.c:666]: pre_match_parse(): bad request or missing CALLID/TO hdr :-/". If i change the destination or the origin of the INVITE the calls work without a problem. Does this happen because both GW's have the same address? Best Regards

2 1

Reading presence state
by Gertjan Wolzak 19 Jul '19

19 Jul '19

Hello Kamailions, I have been able to get the presence configured, subscribers see the status of their subscriptions, this is working fine, for internal, incoming external and external calls. This was solved by enabling use_pubruri_avps in the pua_dialoginfo module. Now I want to be able to route calls based on the presence state. Using the presentity table could be used by doing a query based on the userpart of the ruri, which works fine when the call is still active, but it can take a while for the record to be removed from the presentity table, as that is dependend on the expires value. So when a query is made after a call is finished, a record would still be present in the presentity table till clean_period timer has hit again and the expires value is expired. So I should get the status from memory, but I have not been able to find the information on how to do that. Can someone enlighten me on where to find that information? Rgds, Gertjan

2 4

I need to hold Leg A of a call for a random amount of time
by Gaurav Bmotra 19 Jul '19

19 Jul '19

hi i m using kamailio where i m tring to hold the call bitween switch A and Switch B PSTN -> Switch A -> SWITCHB -> SwitchC -> DESTINATION When PSTN hangs up, I need the call to stay up between SwitchA and B for an arbitrary number of seconds or minute plz help thank you -- *Regards:* Gaurav Kumar

2 1

Kamailio 5.2.3 failed to start due to incompatible openssl version
by Andrew Chen 18 Jul '19

18 Jul '19

Hey support, Today I ran into this error on my latest 5.2.3 Kamailio box: Jul 18 15:05:28 sjomaintpsg51 /usr/sbin/kamailio[5525]: CRITICAL: tls [tls_init.c:671]: init_tls_h(): installed openssl library version is too different from the library the kamailio tls module was compiled with: installed “OpenSSL 1.1.1 11 Sep 2018” (0x1010100f), compiled “OpenSSL 1.1.0g 2 Nov 2017" (0x1010007f).#012 Please make sure a compatible version is used (tls_force_run in kamailio.cfg will override this check) There's not support for openssl1.1.1 ? Thanks -- Andy Chen Sr. Telephony Lead Engineer achen@ <achen(a)thinkingphones.com>fuze.com -- *Confidentiality Notice: The information contained in this e-mail and any attachments may be confidential. If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you.*

2 3

kamailio + asterisk integration RTP flow question
by Satish Patel 18 Jul '19

18 Jul '19

I am configuring kamailio as registar and asterisk for media services. in kamailio + asterisk integration how two SIP clients RTP traffic will flow, are they go via Asterisk or directly from kamailio ?

3 2

SIP-DTLS support
by Martin Meadows 17 Jul '19

17 Jul '19

Hello, Has there been any movement on the support of SIP-DTLS (datagram-TLS) within Kamailio since: * sr-users:2012-October:075185.html <https://lists.kamailio.org/pipermail/sr-users/2012-October/075185.html> I'm interested to see if Kamailio can proxy 5061/udp to a FreeSWITCH 5060/udp. In general, I have been unable to find any material on implementations of: * draft-jennings-sip-dtls-05.html <https://tools.ietf.org/id/draft-jennings-sip-dtls-05.html> Cheers - Martin

4 6

opt_reply(): called for non-OPTIONS request
by Alexandru Covalschi 17 Jul '19

17 Jul '19

Hello list, if KSR.is_OPTIONS() and KSR.is_myself_ruri(): KSR.x.modf("options_reply"); exit(); with a valid URI (no username) gives the subj output (opt_reply(): called for non-OPTIONS request) How could that be? Python KEMI, 5.2.3, docker. ________________________________ Regards, Alexandru Covalschi VoIP Engineer and System Administrator tel: +37367367850

2 5

Kamailio IMS to IP PBX - how?
by David Dean 16 Jul '19

16 Jul '19

I'm trying to connect a VoLTE smartphone to an IP PBX using Kamailio IMS. I've managed to get the smartphone to connect to Kamailio IMS and make calls with our devices registered with Kamailio. The problem is that I need the smartphones to register with the IP PBX which is a VigorBX 2000n. This is so they can use an internal extension number and make calls to other local extensions with hard wired desk phones. Should I be using Kamailio IMS to "proxy" the smartphone SIP connection to the VigorBX PBX? Or would it be better to connect the smartphone directly to the VigorBX using SIP? If so, how? I've read absolutely every how-to document I could lay my hands on but none of them describe integrating IMS with a PBX. Thanks for any help / advice you can offer. Dave

1 0

KEMI beginner question on alpine Linux
by Karsten Horsmann 16 Jul '19

16 Jul '19

Hi List, I play around with alpine Linux 3.10.x and Kamailio 5.2.x and I search for app_python3 and KEMI support. But I don't found it. AFAIK if I want to use KEMI with Python3 I need of course Kamailio and app_python3 (maybe something else?). Is the package maintainer on this list? Cheers Karsten

4 4

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users