- sr-users - kamailio.org

Get destination IP from forwarded invite
by CUMHUR KARAHAN 16 Jan '20

16 Jan '20

Hi all, I'm a newbie for Kamailio and working on a feature needs end-users' destination IP in the first transferred/forwarded invite message. Basically, our system/call flow is like: ClientA -> Kamailio1 -> Kamailio2 -> ClientB Invite from the clientA: tls:212.252.34.165:32980 tls:172.21.193.100:5061 INVITE sip:905364167881@testsip.tvoip.turkcell.com.tr:443 SIP/2.0 Via: SIP/2.0/TLS 100.64.13.139:56993;branch=z9hG4bK.GoiTxA4Ee;rport From: <sip:905368601286@testsip.tvoip.turkcell.com.tr>;tag=WbINy0ypx To: sip:905364167881@testsip.tvoip.turkcell.com.tr CSeq: 20 INVITE ... Needed Ip (Client B's IP 10.252.180.51 for this case) is in the INVITE row of the forwarded message. Invite to the Kamailio2 : udp:172.21.193.100:5060 udp:172.21.193.98:5060 INVITE sip:905364167881@10.252.180.51:36945;transport=tls SIP/2.0 Record-Route: <sip:gearbox11.turkcell.tgc:5060;r2=on;lr;did=7f5.f572;nat=yes> Record-Route: <sip:testsip05.tvoip.turkcell.com.tr:443;transport=tls;r2=on;lr;did=7f5.f572;nat=yes> Via: SIP/2.0/UDP gearbox11.turkcell.tgc:5060;branch=z9hG4bK67ad.4e8e863f2475ab8d3053af0593548557.1;i=f Via: SIP/2.0/TLS 100.64.13.139:56993;received=212.252.34.165;branch=z9hG4bK.1SYkXD1Me;rport=32980 From: <sip:905368601286@testsip.tvoip.turkcell.com.tr>;tag=WbINy0ypx To: sip:905364167881@testsip.tvoip.turkcell.com.tr CSeq: 21 INVITE ... When the first invite message receives, the dialog variables or sel(msg...) parsed values belong to this first received message, as far as I understand during the tests. However I need the forwarded invite message's variables. Even after t_relay in RELAY route, it looks the message I have is the first one. So, I cannot reach this later IP in the forwarded invite message. As far as I understand, bear with me here please, this IP manipulation executes in t_relay function and in the C side of Kamailio. So, I cannot find a way to do that in the our native scripts. Is there any way to get it without diving C code's abyss? Do you have any idea about it? I would appreciate it, if I can get any help or any clue. Thanks for all... S. Cumhur Karahan [http://s.turkcell.com.tr/SiteAssets/Genel/mail-imza.jpg] <http://turkcell.li/ncfYh> Bu elektronik posta ve onunla iletilen butun dosyalar sadece gondericisi tarafindan almasi amaclanan yetkili gercek ya da tuzel kisinin kullanimi icindir. Eger soz konusu yetkili alici degilseniz bu elektronik postanin icerigini aciklamaniz, kopyalamaniz, yonlendirmeniz ve kullanmaniz kesinlikle yasaktir ve bu elektronik postayi derhal silmeniz gerekmektedir. TURKCELL bu mesajin icerdigi bilgilerin do?rulu?u veya eksiksiz oldugu konusunda herhangi bir garanti vermemektedir. Bu nedenle bu bilgilerin ne sekilde olursa olsun iceriginden, iletilmesinden, alinmasindan ve saklanmasindan sorumlu degildir. Bu mesajdaki gorusler yalnizca gonderen kisiye aittir ve TURKCELLin goruslerini yansitmayabilir Bu e-posta bilinen butun bilgisayar viruslerine karsi taranmistir. ________________________________ This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient you are hereby notified that any dissemination, forwarding, copying or use of any of the information is strictly prohibited, and the e-mail should immediately be deleted. TURKCELL makes no warranty as to the accuracy or completeness of any information contained in this message and hereby excludes any liability of any kind for the information contained therein or for the information transmission, reception, storage or use of such in any way whatsoever. The opinions expressed in this message belong to sender alone and may not necessarily reflect the opinions of TURKCELL. This e-mail has been scanned for all known computer viruses.

2 1

Negative ACK issue
by Michael Broughton 15 Jan '20

15 Jan '20

Hello, Long time Kam/Ser user, first time poster. I'm running into a problem with one of our telco providers when we make a call that ends up being not in service or some other error. In this case our ACK's are not working and the phone line stays open for a period of time until something times out on their end. They claim the issue is that our negative ACK message is dropping one of the Via headers. This is the only case I can find in our setup where Kamailio does this. But it does drop the first Via, which is the first hop in our internal network. I don't understand why this is a problem for them, and I'm still trying to get a reasonable explanation out of them. Technically, I don't see why it would be a problem. This behaviour is not an issue with our other telco providers. Strangely enough, it is also not an issue for this provider when we make the calls over their MPLS network (we are switching to the internet). My question is, can this behaviour be changed in Kamailio somehow? Is there a way for it to keep all the Via headers for negative ACK's? Or, do I just need to poke them harder to fix their issues? My setup: Source -> Kamailio -> Firewall (NAT, SIP ALG) -> Telco Provider I hope I have provided enough information. Thanks! Michael

4 9

Kamailio Slack
by Abdirahman A. Osman 15 Jan '20

15 Jan '20

Hello, Is the Kamailio Slack open for sr-users , if yes where can I find the invite link? Thanks Abdirahman

3 2

Re: [SR-Users] sr-users Digest, Vol 176, Issue 11
by Sam Ware 14 Jan '20

14 Jan '20

Alex, I get the following error ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char [ ERROR: bad config file (1 errors) CRITICAL: <core> [core/cfg.y:3537]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 462, column 23-40: Can't get from cache: $(rU{s.select,0,#) David, I did try escaping and get the same error. $avp(techprefix) = $(rU{s.select,0,\#}); additionally, I think I initially tried it double quoted. $avp(techprefix) = $(rU{s.select,0,"#"}); Resulted in: ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char [ ERROR: bad config file (1 errors) CRITICAL: <core> [core/cfg.y:3537]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 462, column 23-42: Can't get from cache: $(rU{s.select,0,"#") Here is the entire block. if ($rU =~ "[\*\#]") { xlog("L_INFO", "[$ci] -> $rU appears to have a tech prefix, processing...\n"); if ($rU =~ "\*") { $avp(techprefix) = $(rU{s.select,0,*}); ## Reset the RURI user to the non-tech prefix'ed value $rU = $(rU{s.select,1,*}); ## Overwrite the message source variable with "sourceip-techprefix" $var(messagesource) = $_s($si-$avp(techprefix)); } else if ($rU =~ "\#") { $avp(techprefix) = $(rU{s.select,0,#)}); ## Reset the RURI user to the non-tech prefix'ed value $rU = $(rU{s.select,1,#}); ## Overwrite the message source variable with "sourceip-techprefix" $var(messagesource) = $_s($si-$avp(techprefix)); } } On Sat, Jan 11, 2020 at 5:00 AM <sr-users-request(a)lists.kamailio.org> wrote: > Send sr-users mailing list submissions to > sr-users(a)lists.kamailio.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > or, via email, send a message with subject or body 'help' to > sr-users-request(a)lists.kamailio.org > > You can reach the person managing the list at > sr-users-owner(a)lists.kamailio.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of sr-users digest..." > Today's Topics: > > 1. Re: Kamailio in Docker Compile Error (Sergey Safarov) > 2. Re: Kamailio in Docker Compile Error (Sam Ware) > 3. Kamailio 5.2.2 IMS -enum_query question (Woscek, Martin W.) > 4. String Transformation Question (Sam Ware) > 5. Re: String Transformation Question (Alex Balashov) > 6. Re: String Transformation Question (David Villasmil) > > > > ---------- Forwarded message ---------- > From: Sergey Safarov <s.safarov(a)gmail.com> > To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org> > Cc: > Bcc: > Date: Fri, 10 Jan 2020 14:38:02 +0300 > Subject: Re: [SR-Users] Kamailio in Docker Compile Error > please try kamailio-ci:5.3.2-alpine > I will fix error about kamailio-ci:5.3.1-alpine. > > On Fri, Jan 10, 2020 at 1:53 PM Asgaroth <00asgaroth00(a)gmail.com> wrote: > >> Hi, >> >> I see that the kamailio-ci:5.3.1-alpine tag exists, but was getting an >> error when trying to pull it 2 days ago, 5.3.0- alpine works fine. >> >> Unfortunately I cannot post the actual docker pull error right now (in >> airport, on my phone) >> >> On Fri 10 Jan 2020, 08:32 Sergey Safarov, <s.safarov(a)gmail.com> wrote: >> >>> yum -y install yum-utils >>> yum-config-manager --add-repo http://rpm.kamailio.org/centos/kamailio.repo >>> yum install kamailio >>> >>> >>> Also you can use this docker image >>> https://hub.docker.com/repository/docker/kamailio/kamailio-ci >>> >>> On Fri, Jan 10, 2020 at 10:58 AM Daniel-Constantin Mierla < >>> miconda(a)gmail.com> wrote: >>> >>>> Hello, >>>> >>>> try to install which and pkg-config tools. >>>> >>>> Cheers, >>>> Daniel >>>> On 10.01.20 02:21, Sam Ware wrote: >>>> >>>> I am attempting to create my own docker image on Centos 7. During the >>>> build, I get the following error message during the "make all" phase. >>>> ---------------------------------------------------------------------- >>>> CC (gcc) [kamailio] core/cfg.tab.o >>>> LD (gcc) [kamailio] kamailio >>>> make[1]: which: Command not found >>>> make[1]: which: Command not found >>>> make[1]: which: Command not found >>>> make[1]: which: Command not found >>>> make[1]: which: Command not found >>>> make[1]: which: Command not found >>>> CC (gcc) [M db_mysql.so] km_dbase.o >>>> km_dbase.c:36:19: fatal error: mysql.h: No such file or directory >>>> #include <mysql.h> >>>> ^ >>>> compilation terminated. >>>> make[1]: *** [km_dbase.o] Error 1 >>>> make: *** [modules] Error 1 >>>> ------------------------------------------------------------------------ >>>> >>>> I checked and the mysql.h exists in the /usr/include/mysql directory. >>>> >>>> Any thoughts? >>>> >>>> FYI, here is my Dockerfile >>>> >>>> FROM centos:7 >>>> MAINTAINER “Sam D Ware” sware(a)o1.com >>>> ENV container docker >>>> RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in ; do [ $i >>>> == systemd-tmpfiles-setup.service ] || rm -f $i; done); >>>> RUN rm -rf /lib/systemd/system/multi-user.target.wants/ \ >>>> && rm -rf /etc/systemd/system/.wants/ \ >>>> && rm -rf /lib/systemd/system/local-fs.target.wants/ \ >>>> && rm -f /lib/systemd/system/sockets.target.wants/udev \ >>>> && rm -f /lib/systemd/system/sockets.target.wants/initctl \ >>>> && rm -rf /lib/systemd/system/basic.target.wants/ \ >>>> && rm -f /lib/systemd/system/anaconda.target.wants/* >>>> VOLUME [ “/sys/fs/cgroup”] >>>> RUN yum -y install epel-release >>>> RUN yum -y update >>>> RUN yum -y install git-core gcc gcc-c++ flex bison mysql-devel >>>> RUN yum -y install mariadb-devel hiredis hiredis-devel curl nss make >>>> WORKDIR /usr/local/src/ >>>> RUN git clone --depth 1 --no-single-branch >>>> https://github.com/kamailio/kamailio kamailio >>>> WORKDIR /usr/local/src/kamailio/ >>>> RUN git checkout -b 5.3 origin/5.3 >>>> RUN make cfg >>>> COPY modules.lst /usr/local/src/kamailio/src/ >>>> RUN make all >>>> RUN make install >>>> RUN groupadd kamailio >>>> RUN adduser --system -g kamailio --shell /bin/false -c "Kamailio" >>>> --home /var/run/kamailio kamailio >>>> RUN cp /usr/local/src/kamailio/pkg/kamailio/obs/kamailio.sysconfig >>>> /etc/sysconfig/kamailio >>>> COPY kamailio.service /etc/systemd/system/kamailio.service >>>> RUN yum clean all; systemctl enable kamailio >>>> CMD ["/usr/sbin/init"] >>>> >>>> -- >>>> Sam D Ware >>>> >>>> >>>> _______________________________________________ >>>> Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> -- >>>> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda >>>> Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com >>>> >>>> _______________________________________________ >>>> Kamailio (SER) - Users Mailing List >>>> sr-users(a)lists.kamailio.org >>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>> >>> _______________________________________________ >>> Kamailio (SER) - Users Mailing List >>> sr-users(a)lists.kamailio.org >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>> >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> sr-users(a)lists.kamailio.org >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> > > > > ---------- Forwarded message ---------- > From: Sam Ware <sam.ware(a)gmail.com> > To: miconda(a)gmail.com > Cc: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org> > Bcc: > Date: Fri, 10 Jan 2020 07:23:46 -0600 > Subject: Re: [SR-Users] Kamailio in Docker Compile Error > Thanks Daniel, > > That got me past that hurdle. It was the "which". Looks like the > pkg-config tools was already install; probably a preq for one of the other > pkgs. > > Sam > > On Fri, Jan 10, 2020 at 1:58 AM Daniel-Constantin Mierla < > miconda(a)gmail.com> wrote: > >> Hello, >> >> try to install which and pkg-config tools. >> >> Cheers, >> Daniel >> On 10.01.20 02:21, Sam Ware wrote: >> >> I am attempting to create my own docker image on Centos 7. During the >> build, I get the following error message during the "make all" phase. >> ---------------------------------------------------------------------- >> CC (gcc) [kamailio] core/cfg.tab.o >> LD (gcc) [kamailio] kamailio >> make[1]: which: Command not found >> make[1]: which: Command not found >> make[1]: which: Command not found >> make[1]: which: Command not found >> make[1]: which: Command not found >> make[1]: which: Command not found >> CC (gcc) [M db_mysql.so] km_dbase.o >> km_dbase.c:36:19: fatal error: mysql.h: No such file or directory >> #include <mysql.h> >> ^ >> compilation terminated. >> make[1]: *** [km_dbase.o] Error 1 >> make: *** [modules] Error 1 >> ------------------------------------------------------------------------ >> >> I checked and the mysql.h exists in the /usr/include/mysql directory. >> >> Any thoughts? >> >> FYI, here is my Dockerfile >> >> FROM centos:7 >> MAINTAINER “Sam D Ware” sware(a)o1.com >> ENV container docker >> RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in ; do [ $i == >> systemd-tmpfiles-setup.service ] || rm -f $i; done); >> RUN rm -rf /lib/systemd/system/multi-user.target.wants/ \ >> && rm -rf /etc/systemd/system/.wants/ \ >> && rm -rf /lib/systemd/system/local-fs.target.wants/ \ >> && rm -f /lib/systemd/system/sockets.target.wants/udev \ >> && rm -f /lib/systemd/system/sockets.target.wants/initctl \ >> && rm -rf /lib/systemd/system/basic.target.wants/ \ >> && rm -f /lib/systemd/system/anaconda.target.wants/* >> VOLUME [ “/sys/fs/cgroup”] >> RUN yum -y install epel-release >> RUN yum -y update >> RUN yum -y install git-core gcc gcc-c++ flex bison mysql-devel >> RUN yum -y install mariadb-devel hiredis hiredis-devel curl nss make >> WORKDIR /usr/local/src/ >> RUN git clone --depth 1 --no-single-branch >> https://github.com/kamailio/kamailio kamailio >> WORKDIR /usr/local/src/kamailio/ >> RUN git checkout -b 5.3 origin/5.3 >> RUN make cfg >> COPY modules.lst /usr/local/src/kamailio/src/ >> RUN make all >> RUN make install >> RUN groupadd kamailio >> RUN adduser --system -g kamailio --shell /bin/false -c "Kamailio" --home >> /var/run/kamailio kamailio >> RUN cp /usr/local/src/kamailio/pkg/kamailio/obs/kamailio.sysconfig >> /etc/sysconfig/kamailio >> COPY kamailio.service /etc/systemd/system/kamailio.service >> RUN yum clean all; systemctl enable kamailio >> CMD ["/usr/sbin/init"] >> >> -- >> Sam D Ware >> >> >> _______________________________________________ >> Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> >> -- >> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda >> Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com >> >> > > -- > Sam D Ware > > > > > ---------- Forwarded message ---------- > From: "Woscek, Martin W." <mwoscek(a)mitre.org> > To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org> > Cc: > Bcc: > Date: Fri, 10 Jan 2020 16:57:29 +0000 > Subject: [SR-Users] Kamailio 5.2.2 IMS -enum_query question > > Hi, > > > > I am trying to invoke unum lookups from calls to enum_query() > ,is_from_user_enum() and enum_pv_query(). > > However we are not seeing any enum lookups over the wire using wireshark. > > > > In the Kamailio.cfg the following are set: > > > > loadmodule "enum" > > modparam("enum", "domain_suffix", "mydnsserver.org.") > > modparam("enum", "i_enum_suffix", " mydnsserver.org.") > > > > sample use in our Kamailio.cfg file: > > > > if(!enum_query("mydnsserver.org.")) { > > xlog(“….); > > #do something > > } else { > > Xlog(“….”) > > #do something else > > } > > > > I do see NAPTR lookups being done by the other Kamailio IMS processes > initially when it starts up so I know it has connectivity to the DNS > server, but none for the invoked enum queries. > > > > We are running Kamailio 5.2.2. > > > > Thanks, > > Martin > > > > ---------- Forwarded message ---------- > From: Sam Ware <sam.ware(a)gmail.com> > To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org> > Cc: > Bcc: > Date: Fri, 10 Jan 2020 17:22:17 -0600 > Subject: [SR-Users] String Transformation Question > We are receiving traffic with a tech prefix. We want to be able to use a > # (hash tag) for the separator for the tech prefix and the remote user > ($rU). I was using the s.select transformation before when using * for > separator, but I get an error because it appears that it being interpreted > as a comment. Any suggestions? > > Example: > ## How I was doing it with the * > $avp(techprefix) = $(rU{s.select,0,*}); > > ## How I tried and got an error for the hash tag > $avp(techprefix) = $(rU{s.select,0,#}); > -- > Sam D Ware > > > > > ---------- Forwarded message ---------- > From: Alex Balashov <abalashov(a)evaristesys.com> > To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org> > Cc: > Bcc: > Date: Fri, 10 Jan 2020 18:24:44 -0500 > Subject: Re: [SR-Users] String Transformation Question > What’s the error? > > — > Sent from mobile, with due apologies for brevity and errors. > > On Jan 10, 2020, at 6:23 PM, Sam Ware <sam.ware(a)gmail.com> wrote: > > > We are receiving traffic with a tech prefix. We want to be able to use a > # (hash tag) for the separator for the tech prefix and the remote user > ($rU). I was using the s.select transformation before when using * for > separator, but I get an error because it appears that it being interpreted > as a comment. Any suggestions? > > Example: > ## How I was doing it with the * > $avp(techprefix) = $(rU{s.select,0,*}); > > ## How I tried and got an error for the hash tag > $avp(techprefix) = $(rU{s.select,0,#}); > -- > Sam D Ware > > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users(a)lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > > > > ---------- Forwarded message ---------- > From: David Villasmil <david.villasmil.work(a)gmail.com> > To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org> > Cc: > Bcc: > Date: Fri, 10 Jan 2020 23:24:51 +0000 > Subject: Re: [SR-Users] String Transformation Question > Have you tried scaping it? Never done it, tho > > On Fri, 10 Jan 2020 at 23:23, Sam Ware <sam.ware(a)gmail.com> wrote: > >> We are receiving traffic with a tech prefix. We want to be able to use a >> # (hash tag) for the separator for the tech prefix and the remote user >> ($rU). I was using the s.select transformation before when using * for >> separator, but I get an error because it appears that it being interpreted >> as a comment. Any suggestions? >> >> Example: >> ## How I was doing it with the * >> $avp(techprefix) = $(rU{s.select,0,*}); >> >> ## How I tried and got an error for the hash tag >> $avp(techprefix) = $(rU{s.select,0,#}); >> -- >> Sam D Ware >> >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> sr-users(a)lists.kamailio.org >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> > -- > Regards, > > David Villasmil > email: david.villasmil.work(a)gmail.com > phone: +34669448337 > _______________________________________________ > sr-users mailing list > sr-users(a)lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > -- Sam D Ware

3 3

Kamailio service error
by Ratanraj Singh 14 Jan '20

14 Jan '20

Hi All, I am troubling with kamailio service error. Can someone help on this issue? [image: image.png]

2 1

Trigger a custom SIP Notify Message on demand
by Rupesh Kumar 14 Jan '20

14 Jan '20

Hello kamailio gurus, I was wondering if there is a way to send a custom SIP NOTIFY message from kamailio to the registered SIP clients on-demand. For example, I want to take a kamailio node for maintainance and want all polycom phones registered on a kamailio node to re-register and move to a different kamailio node. I know the uac module can send custom requests via uac_req_send, but can I invoke this via a kamcmd or kamctl command ?Any pointers/clues would be a great help. Thanks,RK

2 3

topos and db_redis
by Ben Merrills 13 Jan '20

13 Jan '20

Hi All, Quick question, I've tried to find this myself, but there doesn't seem to be any documentation that I can find on it. Does the topos module work with db_redis module? I can see two schema files for topos (topos_t, topos_d), but I can't work out what the keys should be. modparam("db_redis", "keys", "topos_t=entry:hash_entry,hash_id,...?") modparam("db_redis", "keys", "topos_d=entry:hash_entry,hash_id,...?") modparam("topos", "db_url", "redis://127.0.0.1:6379/kamailio") modparam("topos", "storage", "db") Any pointers would be greatly appreciated. Kind Regards, Ben Merrills

2 1

Diameter EVENT_REQUEST
by Steve Bucklin 13 Jan '20

13 Jan '20

Dear All, I was wondering if someone could give me a pointer on handling diameter "EVENT REQUEST" (416) I am a complete newb to the diameter, and have used a RESTCOMM SMS-C to generate charging requests. 1. I have got the CDP and other modules going and it connects with application (Diameter Credit Control Application (4) 2. I tried to use a simple ims_ocs module, but get a "getMethod()" error. Looking at the code, there are only three supported, START, INTERIM, & STOP. 3. I have captured the message in pcap - and all looks OK. 4. To examine the whole message I tried using the ims_diameter_server module to produce a JSON of all the values sent in the $diameter_request within the event_route, HOWEVER once the request arrives I get an error: ERROR: cdp [diameter_avp.c:645]: AAAUngroupAVPS(): hss3g_ungroup_avps: source buffer to short!! Cannot read the whole AVP header! I assume that the cdp function AAAUngroupAVPS() cannot sort the data into JSON due to a buffer issue. Any pointers? Steve

1 0

Dúvidas
by Genildo Nascimento 13 Jan '20

13 Jan '20

Boa Noite. Instalei o kamailio mas não consigo usar Segue a configuração. baixei e adicionei chave GPG à sua lista de chaves apt wget -O- http://deb.kamailio.org/kamailiodebkey.gpg | sudo apt-key a Em seguida, adicionei as linhas do repositório ao seu arquivo /etc/apt/sources.list , Adicionei um repositório para a versão mais recente. sudo nano /etc/apt/source.list.d/kamailio.list versão ubuntu 16.04 deb http://deb.kamailio.org/kamailio53 xenial main deb-src http://deb.kamailio.org/kamailio53 xenial main Atualização do sistema e instalação do Kamailio sudo apt update sudo apt install kamailio kamailio-mysql-modules Editei o arquivo /etc/kamailio/kamctlrc e verifiquei se a DBENGINE variável está definida como MySQL. Removi o #símbolo para descomentá-lo. $ sudo nano / etc / kamailio / kamctlrc DBENGINE = MYSQL DBHOST = host local Instalei banco de dados apt install mysql-server modulos também apt -y install kamailio kamailio-mysql-modules kamailio-utils-modules rtpproxy Em seguida criei banco de dados para Mysql. sudo kamdbctl create logo após foi inserida a senha (xxxx) editei o arquivo /etc/kamailio/kamailio.cfg #! define WITH_MYSQL #! define WITH_AUTH *#! define WITH_USRLOCDB -> ao adicionar este iten o kamailio reiinicializa com erro (segue anexo arquivo jpeg)* #! define WITH_ACCDB Editei a linha da variável RUN_KAMAILIO no arquivo /etc/default/kamailio para que o kamailio possa rodar. RUN_KAMAILIO=yes configuração do rtpproxy no arquivo /ec/default/rtpproxy retirada do #simbolo control_sock=udp:localhost:7722 EXTRA_OPTS=" -l < IP local >" reinicio RTPproxy Obs: O sistema tambem não existe o arquivo /var/log/kamailio.log

1 0

String Transformation Question
by Sam Ware 10 Jan '20

10 Jan '20

We are receiving traffic with a tech prefix. We want to be able to use a # (hash tag) for the separator for the tech prefix and the remote user ($rU). I was using the s.select transformation before when using * for separator, but I get an error because it appears that it being interpreted as a comment. Any suggestions? Example: ## How I was doing it with the * $avp(techprefix) = $(rU{s.select,0,*}); ## How I tried and got an error for the hash tag $avp(techprefix) = $(rU{s.select,0,#}); -- Sam D Ware

3 2

Kamailio in Docker Compile Error
by Sam Ware 10 Jan '20

10 Jan '20

I am attempting to create my own docker image on Centos 7. During the build, I get the following error message during the "make all" phase. ---------------------------------------------------------------------- CC (gcc) [kamailio] core/cfg.tab.o LD (gcc) [kamailio] kamailio make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found make[1]: which: Command not found CC (gcc) [M db_mysql.so] km_dbase.o km_dbase.c:36:19: fatal error: mysql.h: No such file or directory #include <mysql.h> ^ compilation terminated. make[1]: *** [km_dbase.o] Error 1 make: *** [modules] Error 1 ------------------------------------------------------------------------ I checked and the mysql.h exists in the /usr/include/mysql directory. Any thoughts? FYI, here is my Dockerfile FROM centos:7 MAINTAINER “Sam D Ware” sware(a)o1.com ENV container docker RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in ; do [ $i == systemd-tmpfiles-setup.service ] || rm -f $i; done); RUN rm -rf /lib/systemd/system/multi-user.target.wants/ \ && rm -rf /etc/systemd/system/.wants/ \ && rm -rf /lib/systemd/system/local-fs.target.wants/ \ && rm -f /lib/systemd/system/sockets.target.wants/udev \ && rm -f /lib/systemd/system/sockets.target.wants/initctl \ && rm -rf /lib/systemd/system/basic.target.wants/ \ && rm -f /lib/systemd/system/anaconda.target.wants/* VOLUME [ “/sys/fs/cgroup”] RUN yum -y install epel-release RUN yum -y update RUN yum -y install git-core gcc gcc-c++ flex bison mysql-devel RUN yum -y install mariadb-devel hiredis hiredis-devel curl nss make WORKDIR /usr/local/src/ RUN git clone --depth 1 --no-single-branch https://github.com/kamailio/kamailio kamailio WORKDIR /usr/local/src/kamailio/ RUN git checkout -b 5.3 origin/5.3 RUN make cfg COPY modules.lst /usr/local/src/kamailio/src/ RUN make all RUN make install RUN groupadd kamailio RUN adduser --system -g kamailio --shell /bin/false -c "Kamailio" --home /var/run/kamailio kamailio RUN cp /usr/local/src/kamailio/pkg/kamailio/obs/kamailio.sysconfig /etc/sysconfig/kamailio COPY kamailio.service /etc/systemd/system/kamailio.service RUN yum clean all; systemctl enable kamailio CMD ["/usr/sbin/init"] -- Sam D Ware

5 6

caching 404 responses
by Krzysztof Drewicz 10 Jan '20

10 Jan '20

Hello would like to see if I'm not reinventing the wheel: scenario: some old powerdialler/predictive calls kamailio as call dispatcher, kamailio then dials carrier. But this dialler does many calls to the same B number with 404 response (from carrier) in short (retry is < 600s) time, so no need to bother PSTN/carrier with retry. Should I simply use htable, cache 404 hit, use some reasonable value modparam("htable", "db_expires", 1) put there like 600 s TTL or something like that? Any hints/thoughts? Maybe this scenario is common and being used with success somewhere (and yes, this powerdialer is not very clever, and I do know it should not be needed for this) Thanks, -- *Krzysztof Drewicz* Senior Infrastructure Administrator CLUDO | ul. Grochowska 306/308, 03-840 Warszawa t+48221223977 kdrewicz(a)cludo.pl | www.cludo.pl <http://www.cludo.pl/>

2 1

TCP packet bundling
by Alex Balashov 09 Jan '20

09 Jan '20

Hi, I wanted to get clarity on a rather basic question: When using Kamailio with TCP, is it possible to end up with fragments of multiple SIP messages in a single "on-the-wire" packet? >From what I understand, the purpose of Kamailio's setting TCP_NODELAY is to prevent such bundling--as much as it is possible to control the fragmentation/packetisation behaviour of the transport protocol from a user-space application. -- Alex -- Alex Balashov | Principal | Evariste Systems LLC Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/

3 7

Huge DB load while using location and registrar module (save()).
by Voip support 09 Jan '20

09 Jan '20

Dear Community, I am facing an issue with using the usrloc and registrar module to save registration informations in database. It works for me but when tested yesterday with around 1500-1600 users i got a lot of queries on database mostly SELECT. I figured out that changing db_mode to 0 resolves the issue because it works totally in memory (almost no select query on DB). So i think its location module. I tried db_mode=3 and db_mode=2 but both create a lot of load on database. The only function i need is to store some information of REGISTER in DB to know the count of registered users and the source IP / user-agent / username data. It needs to be saved in table on successfull REGISTRATION and removed when registration is expired or somebody UN-REGISTER. When used location module for that there was lots of queries like this (20000-50000 per second): select `contact`,`expires`,`q`,`callid`,`cseq`,`flags`,`cflags`,`user_agent`,`received`,`path`,`socket`,`methods`,`last_modified`,`ruid`,`instance`,`reg_id`,`server_id`,`connection_id`,`keepalive` from `location` where `username`='xxxx' order by q update `location` set `expires`='2020-01-08 18:51:39',`q`=-1.000000 ,`cseq`=2042,`flags`=0,`cflags`=64,`user_agent`='n/a',`received`='sip:xxxx:5060',`path`=NULL,`socket`='udp:xxxx:20051',`methods`=NULL,`last_modified`='2020-01-08 18:50:39',`callid`='1205705227@xxxx ',`instance`=NULL,`reg_id`=0,`server_id`=0,`connection_id`=-1,`keepalive`=1,`contact`='sip:1019@xxx:5060' where `ruid`='uloc-5e1642a3-2b90-0161' Looking up for ideas how to resolve this issue. I was thinking of implementing INSERT UPDATE and DELETE based on SQLops. But how to recognize that REGISTER was expiered? I would like location module to work mostly like in-memory. For each new registration INSERT entry to DB, each REGISTER re-new an UPDATE or DELETE should be triggered. So i would expect for 1000 users around 2000 operations per minute. Best regards, Tom

5 6

Kamailio v5.3.2 Released
by Daniel-Constantin Mierla 09 Jan '20

09 Jan '20

Hello, Kamailio SIP Server v5.3.2 stable release is out. This is a maintenance release of the latest stable branch, 5.3, that includes fixes since the release of v5.3.1. There is no change to database schema or configuration language structure that you have to do on previous installations of v5.3.x. Deployments running previous v5.3.x versions are strongly recommended to be upgraded to v5.3.2. For more details about version 5.3.2 (including links and guidelines to download the tarball or from GIT repository), visit: * https://www.kamailio.org/w/2020/01/kamailio-v5-3-2-released/ RPM, Debian/Ubuntu packages will be available soon as well. Many thanks to all contributing and using Kamailio! Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com

1 0

Ask for Siremis document
by Thanh Tran 09 Jan '20

09 Jan '20

Hi, I looking for Administration Document for Siremis but can't find it. Can you share document ? Thanks,

2 1

Releasing Kamailio v5.3.2
by Daniel-Constantin Mierla 09 Jan '20

09 Jan '20

Hello, not so many fixes since the release of 5.3.1, but it looks enough to release a new minor version from branch 5.3. I am planning to do in on Thursday, Jan 9, 2020, if there are no new reports of relevant issues that make us to reconsider and postpone. Soon after we should probably do a release from branch 5.2 as well as the last one from branch 5.1. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com

1 1

Parsing exception when "user=phone" is present
by Duarte Rocha 08 Jan '20

08 Jan '20

Greetings, I'm testing some portability scenarios with carriers and i've ran into some issues. Take this example URI from ETSI TR 184 003 ( https://www.etsi.org/deliver/etsi_tr/184000_184099/184003/03.01.01_60/tr_18… ) - Sip:+49234598765;npdi;rn=+49-D123@provider5.net;user=phone In this case i need to parse user, user's parameters, domain and uri parameters. In order to that i'm using uri's transformations like {uri.user}, {uri.domain}, etc. However, when "user=phone" is present, Kamailio's parser works differently. Without "user=phone" -> {uri.user} is equal to "+49234598765;npdi;rn=+49-D123" With "user=phone" -> {uri.user} is equal to "+49234598765" . I really need to access "rn" and "npdi" parameters in those cases. How can i do it when "user=phone" is present? Is there a way to disable the "user=phone" exception for parsing? Best Regards, Duarte Rocha

2 2

possible TCP deadlock (tls again?) // pike module not releasing IPs
by Aymeric Moizard 08 Jan '20

08 Jan '20

Hi List, History: * In the past, I had deadlock which was, most probably, related to ssl1.1. We have discussed this issue, and a fix is supposed to workaround the issue that was detected. * With latest 5.2.X, I have experienced ONCE a similar behavior with TCP and TLS being mostly stuck. I have not been using this version much, but the fix was supposed to be in the core of kamailio. The status of the server this night: * I'm today running version: kamailio 5.3.1 (x86_64/linux), * Installed on stretch using http://deb.kamailio.org/kamailio53 repository. * This versions use libssl1.1 * A user reported that he can't connect with TCP * An average of 5000 IPs per 10 minutes are being banned by the pike module (could be twice the same) Yesterday/Today: * at the end of the outage, I had 2479 IP in my ipban htable. (which is equivalent to my statistics showing 2 bans/IP every 10 minutes = 5000) * looking at my logs, it appears that most (ALL?) ip being banned... are my regular users. * looking at my logs, I can't understand why pike would block them. This is a graph for statistics on my service for the last 24 hours: https://www.antisip.com/sip-antisip-com-register/status2.html Yesterday, at 22:18:39, kamailio started to BAN some IPs. 52 IPs were banned in a period of 10 minutes. I can confirm this from my logs. My pike configuration is this one: modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 64) modparam("pike", "remove_latency", 4) When detecting the issue, this morning, I typed: $> sudo kamctl stats $> sudo kamcmd htable.dump ipban //FAILURE (answer too large...) $> sudo kamctl trap Then, I started an agent with TCP and it worked...??? Then, a few seconds, may be a minute after: $> sudo kamcmd htable.dump ipban //SUCCESS and shows 2479 banned ip. and... everything is back to normal in a few minutes. I haven't restarted kamailio, and all statistics are as expected, as usual. Thus, it looks that " sudo kamctl trap" has triggered something. I already experienced a similar behavior -when testing my ssl1.1 deadlock last year-. 2 questions: 1/ I beleive my "pike" configuration should not ban users. Is my pike configuration wrong? As an example, pike has banned an IP sending one message/second. I believe my configuration should accept that? 2/ Could there still be a TLS issue with libssl1.1? This is the result of the "kamctl trap": https://sip.antisip.com/kamailio-pike-or-tls-issue-13-12-2019.kamctl-trap Sorry for the long story & hoping to find a long term solution or at least a workaround! Regards Aymeric -- Antisip - http://www.antisip.com

3 11

Re: [SR-Users] Add user issue - Multiicon
by technical＠multiicon.in 08 Jan '20

08 Jan '20

Dear Kamailio team, Greetings from Multiicon. We setuping kamailio sip server and all thing are done but when we going to add user we are getting Command not found. Using below command. I also check the server status by using systemctl status kamailio is showing active Please advise on this. Thanks & Regards, VIVEK AGHERA #technical department IND : +91 63548 23958 <mailto:vivek@multiicon.in> vivek(a)multiicon.in MULTIICON IDEOTECHNOLOGY PVT.LTD. 3rd Floor, Rumi Plaza, Airport Road, Rajkot - 360 001, Gujarat (INDIA) Please consider the environment before printing this e-mail.

2 1

WebRTC ACK Protocol
by Ilie Soltanici 08 Jan '20

08 Jan '20

Hello, I am trying to set up a WebRTC2SIP Gateway by using Kamailio and rtpengine. So far, everything is working fine, I'm able to register an extension and make a call, but for some reason, when i'm trying to call a WebRTC extension from any SIP Extension Kamailio is sending INVITE, WebRTC extension is sending back 200 OK, and then Kamailio is trying to send an ACK through UDP protocol, and not through wss, as it's supposed to do. This is how invite is looking: INVITE sip:nl7oe4ss@vjbh7r4im6j7.invalid;transport=wss SIP/2.0 Record-Route: <sip:my-company.net ;transport=udp;ftag=as1789445c;lr=on;nat=yes> Via: SIP/2.0/WSS 123.123.123.123:10443 ;branch=z9hG4bKe655.29d7c135a302f3eb803902d4f5a8da7e.0 Via: SIP/2.0/UDP 192.168.50.237:5060 ;received=192.168.50.237;branch=z9hG4bK7d2e534e;rport=5060 Max-Forwards: 70 From: "WebRTC" <sip:11@my-company.net>;tag=as1789445c To: <sip:15@192.168.50.210:5060> Contact: <sip:11@192.168.50.237:5060> Call-ID: 7fc800de060197fa2315c93763873092(a)my-company.net CSeq: 102 INVITE User-Agent: Proxy Date: Wed, 03 Apr 2019 17:11:41 GMT Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE Supported: replaces, timer Alert-Info: Content-Type: application/sdp Content-Length: 596 Server: SIP Proxy and then WebRTC app is replying with 200 OK: SIP/2.0 200 OK Record-Route: <sip:my-company.net ;transport=udp;ftag=as1789445c;lr=on;nat=yes> Via: SIP/2.0/WSS 123.123.123.123:10443 ;branch=z9hG4bKe655.29d7c135a302f3eb803902d4f5a8da7e.0 Via: SIP/2.0/UDP 192.168.50.237:5060 ;received=192.168.50.237;branch=z9hG4bK7d2e534e;rport=5060 To: <sip:15@192.168.50.210:5060>;tag=dk4fa8ftt6 From: "WebRTC" <sip:11@my-company.net>;tag=as1789445c Call-ID: 7fc800de060197fa2315c93763873092(a)my-company.net CSeq: 102 INVITE Contact: <sip:nl7oe4ss@vjbh7r4im6j7.invalid;transport=wss> Allow: ACK,CANCEL,INVITE,MESSAGE,BYE,OPTIONS,INFO,NOTIFY,REFER Supported: outbound User-Agent: Proxy-WEBRTC Content-Type: application/sdp Content-Length: 901 and finally, Kamailio is trying to send this ack through UDP protocol: ACK sip:nl7oe4ss@22.22.22.22:57421;transport=wss SIP/2.0 Via: SIP/2.0/UDP 192.168.50.237:5060;branch=z9hG4bK56363ddf;rport Route: <sip:my-company.net;transport=udp;ftag=as1789445c;lr=on;nat=yes> Max-Forwards: 70 From: "WebRTC" <sip:11@my-company.net>;tag=as1789445c To: <sip:15@192.168.50.210:5060>;tag=dk4fa8ftt6 Contact: <sip:11@192.168.50.237:5060> Call-ID: 7fc800de060197fa2315c93763873092(a)my-company.net CSeq: 102 ACK User-Agent: Proxy Content-Length: 0 If i'm trying to force it through TLS, i'm receiving error: get_send_socket2(): protocol/port mismatch (forced tls:123.123.123.123:10443, to udp:22.22.22.22:23317) Can someone point me in the right direction, please? Thank you.

3 4

Kamailio when acting as client doesnt send SNI in client hello handshake message
by mahesh b 07 Jan '20

07 Jan '20

Hi, Am using Kamailio 5.1.9 version My Setup : client1 -> kamailio server 1 ( IP : 10.211.160.172) ----> kamailio server 2( IP : 10.211.160.176) -> client2 I have a scenario where kamailio server 1 has to initiate an outgoing tls connection to kamailio server 2, i have set the server_name and server_id in the client profile in tls.cfg like below on kamailio server 1 [client:default] verify_certificate = no require_certificate = no server_name = mahesh.client.com [client:10.211.160.172:5061] method = TLSv1+ verify_certificate = yes require_certificate = yes private_key = /root/mahesh_openssl/profile2/btip_172_server_private.key certificate = /root/mahesh_openssl/profile2/btip_172_server_public.crt ca_list = /root/mahesh_openssl/profile2/btip_ca_public.crt cipher_list = RSA verify_depth = 9 server_name = btip.176.com server_id = btip.176.com And in sar.cfg $xavp(tls=>server_name)="btip.176.com"; $xavp(tls=>server_id)="btip.176.com"; $du = "sip:10.211.160.176:5061;transport=tls"; .... t_relay(); What i observe is that , when client hello is sent by 10.211.160.172 to 10.211.160.176, i dont see Extension server_name being sent. Am i missing anything. Please help !

4 7

app_lua with kamailio 5.3.X
by Aymeric Moizard 07 Jan '20

07 Jan '20

Hi All! I have moved from kamailio 5.2.X to 5.3.X and I have now an error with calling "sr.err" from my lua script: sr.err("ERROR: param $tU [" .. tu .. "]\n") app_lua [app_lua_api.c:626]: app_lua_runstring(): error from Lua: /etc/kamailio/lua/my-script.lua:69: attempt to index global 'sr' (a nil value) I do understand that I should add this to continue with old way: loadmodule "app_lua_sr.so" modparam("app_lua_sr", "register", "sl") However, I would prefer to fix my script to use the NEW way but can't find it. Thanks a lot. Aymeric -- Antisip - http://www.antisip.com

2 1

RTPEngine performance - How far are you pushing your systems
by davy van de moere 07 Jan '20

07 Jan '20

Dear all, Not a direct question on kamailio, but on rtpengine, so feel free to ignore :) I have a farm of rtpengine servers , supporting our set of kamailio's. On recent decent hardware (hp dl360 gen9/10 servers), I typically push my systems upto 2500 channels per machine. Then I tend to see the load of the machine go up in a logarithmic manner. E.g. a load of 3 supports 2500 channels, but when its at 3000 channels, load can be at 8. etc. I have the kernel module running, and I have a good impression it's being used too. No transcoding is going on, no recording, ... I've tried on different OS'es, different network cards, and I always end up at that 2500 channels +-. Is that what I can expect from rtpengine? Or am I really overlooking something? What numbers do you push out of your systems? kind regards and happy 2020!

5 10

Siremis & freeswitch
by John Tuxies 07 Jan '20

07 Jan '20

I have a Debian server running Kamailio and i have all my users regiatering and talking to each other. I do create/remove users from Siremis. I have followed the guide from here: https://www.powerpbx.org/content/kamailio-v5-siremis-v5-debian-v9-mariadb-a… I would like to add freeswitch to the same server and add conference, voicemail, supplementary services for my users. I have given it a try to install freeswitch and tried to configure it accordingly to https://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc But.now the Siremis gui shows a lot of errors and i cannot login any more. Since it is a Virtual machine i reverted it back and it works without freeswitch. How could i integrate freeswitch to my system please?

4 11

opensource VoLTE/IMS Clients like IMSDroid
by Hamid Hashmi 06 Jan '20

06 Jan '20

Dear Users Can you please name some of VoLTE/IMS Clients (Like IMSDroid for Android) for Windows/Linux/MAC to test IMS Network. IMSdroid available clients on the internet are not working with android v8,9 and 10. or if someone can guide me to create a working APK from IMSDroid available code on Github<https://github.com/DoubangoTelecom/imsdroid>. Regards Hamid

1 0

SNI Query
by mahesh b 06 Jan '20

06 Jan '20

Hi All, Am using Kamailio 5.1.9 version. *Below is my tls.cfg* [server:default] method = TLSv1+ verify_certificate = no require_certificate = no private_key = server.key certificate = server.crt ca_list = bundle.crt cipher_list = RSA verify_depth = 9 [client:default] verify_certificate = no require_certificate = no [server:10.211.160.172:5061] method = TLSv1+ verify_certificate = yes require_certificate = yes private_key = /root/mahesh_openssl/profile2/btip_172_server_private.key certificate = /root/mahesh_openssl/profile2/btip_172_server_public.crt ca_list = /root/mahesh_openssl/profile2/btip_ca_public.crt cipher_list = RSA verify_depth = 9 server_name = btip.172.com [server:10.211.160.172:5061] method = TLSv1+ verify_certificate = yes require_certificate = yes private_key = /root/mahesh_openssl/profile1/ctip_172_server_private.key certificate = /root/mahesh_openssl/profile1/ctip_172_server_public.crt ca_list = /root/mahesh_openssl/profile1/ctip_ca_public.crt cipher_list = RSA verify_depth = 9 server_name = ctip.172.com My Kamailio server ip is 10.211.160.172 i)When i initiate a tls connection from remote server(which is also a kamailio server) say 10.211.160.176 to 10.211.160.172 In the client hello am setting sni name as btip.172.com => so on 10.211.160.172 side it is picking up the server profile with serve_name btip.172.com for the tls handshake.*// Working as expected* ii)When i initiate a tls connection from another remote server(Which is also a kamailio server) say 10.211.160.163 to 10.211.160.172 In the client hello am setting sni name as ctip.172.com => so on 10.211.160.172 side it is picking up the server profile with serve_name ctip.172.com for the tls handshake.*// Working as expected* iii)When i initiate a tls connection from another remote server(Which is also a kamailio server) say 10.211.160.175 to 10.211.160.172 In the client hello am NOT setting sni name => so on 10.211.160.172 side should it pick up the server default profile or the first profile to which IP and port matches ? what i observe from logs is that it is picking up the server profile with server_name ctip.172.com for the tls handshake. I had a look at the code in function tls_lookup_cfg, from the debug prints i understand it is trying to match profile for IP and port if ((p->port==0 || p->port == port) && ip_addr_cmp(&p->ip, ip))* // IP and port matched* { if(sname && sname->len>0) *//Incoming Client hello dint have sname, so it will hit the else part* { if(p->server_name.s && p->server_name.len==sname->len && strncasecmp(p->server_name.s, sname->s, sname->len)==0) { LM_DBG("socket+server_name based TLS server domain found\n"); return p; } } else { return p; *// so it is returning the first profile to which IP and port matched.* } } Am i missing anything or is this a bug ? if in the clienthello there is no sni , what needs to be done to make use of the default profile for the tls handshake ? Or is this something fixed in latest. I just Tried and Modified the code as below, after which it is giving the server default profile when no sni in Incoming Client Hello. if ((p->port==0 || p->port == port) && ip_addr_cmp(&p->ip, ip)) { if(sname && sname->len>0) { if(p->server_name.s && p->server_name.len==sname->len && strncasecmp(p->server_name.s, sname->s, sname->len)==0) { LM_DBG("socket+server_name based TLS server domain found\n"); return p; } } else { if( (type & TLS_DOMAIN_SRV) && (p->server_name.s) ) { LM_DBG("Inside %s at %d\n",__FUNCTION__,__LINE__); return cfg->srv_default; } else { LM_DBG("Inside %s at %d\n",__FUNCTION__,__LINE__); return p; } } } Regards, Mahesh.B

2 4

Installation issue
by Hassen Bencheikh 06 Jan '20

06 Jan '20

Good morning, I am a telecommunication engineer from the National Establishment of Aerial Navigation (Algeria). First of all i would like to thank you for making the SIP sever Kamailio available. But actually i have got issues during the installation process. I was using the steps described on the link below : https://www.kamailio.org/wiki/install/devel/git The issue was encountered at the step #make all, an error was found, and here is what was displayed on the terminal: *linux-vd3w:/usr/local/src/kamailio-devel/kamailio # make allmake -C src/ all make[1]: Entering directory '/usr/local/src/kamailio-devel/kamailio/src'generating core/autover.h ...CC (gcc) [kamailio] core/ver.oLD (gcc) [kamailio] kamailiowhich: no mysql_config in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin)which: no mysql_config5 in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin)which: no mariadb_config in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin)which: no mysql_config in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin)which: no mysql_config5 in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin)which: no mariadb_config in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin)CC (gcc) [M db_mysql.so] my_res.oIn file included from my_res.c:24:0:my_cmd.h:27:10: fatal error: mysql.h: No such file or directory #include <mysql.h> ^~~~~~~~~compilation terminated.make[2]: *** [../../Makefile.rules:100: my_res.o] Error 1make[1]: *** [Makefile:511: modules] Error 1make[1]: Leaving directory '/usr/local/src/kamailio-devel/kamailio/src'make: *** [Makefile:30: all] Error 2linux-vd3w:/usr/local/src/kamailio-devel/kamailio #* Actually my knowledge on linux (opensuse leap) that i am using is very limited. Hopefully i will be able to use the server once installed and it will be used for ip recording tests purpose. Thank you for reading this email. Good bye.

5 4

MSRP proxy
by Sergey Safarov 06 Jan '20

06 Jan '20

I want proxy MSRP data on kamailio for SIP call (not websocket). To do this need update connection information for "message" media in SDP. How i can properly do it only for one media (other medias will be proxed using rtpproxy or rtpengine ). Looks as fix_nated_sdp fix for all medias in SDP. Sergey

2 1

pv_parse_spec2(): wrong char [)/41] in [$T(reply_reason)] at [15 (5)]
by Denys Pozniak 06 Jan '20

06 Jan '20

Hello! Looks like $T(reply_reason) does not work well (although $T_reply_reason is ok). Kamailio script: failure_route[TRUNK_FAILURE] { ... xlog("L_WARN","rm=$rm / $T(reply_reason) \n"); ... } 0(8894) ERROR: tmx [t_var.c:696]: pv_parse_t_name(): unknown PV name reply_reason 0(8894) ERROR: <core> [core/pvapi.c:952]: pv_parse_spec2(): pvar "T" has an invalid name param [reply_reason] 0(8894) ERROR: <core> [core/pvapi.c:1107]: pv_parse_spec2(): wrong char [)/41] in [$T(reply_reason)] at [15 (5)] 0(8894) ERROR: xlog [xlog.c:511]: xdbg_fixup_helper(): wrong format[rm=$rm / $T(reply_reason) https://www.kamailio.org/wiki/cookbooks/5.2.x/pseudovariables $T(name) - pseudo-variable class to access TM attributes The *name* can be: - reply_reason - reply reason [kamailio]$ kamailio -v version: kamailio 5.2.2 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled on 18:04:26 Apr 3 2019 with gcc 4.8.5 -- BR, Denys Pozniak

2 1

Tweaking TCP settings
by Dovid Bender 06 Jan '20

06 Jan '20

Hi, First off please forgive my lack of knowledge on how TCP works. We are using Kamailio 5.0.7 and we have an issue where clients are connecting via TCP and their NAT devices are closing up. Because of this we want to send TCP keep alives every so often. 1) When restarting Kamailio it's sends a RST. Is this Kamailio sending it out or is it linux sending it when the application is killed? The issue we have is if say we need to do a restart 2-3 times (yes we should normally do that) then we end up with 3x registrations in the db (since when using db mode if the connection goes away it won't remove the reg from the db (as per - https://kamailio.org/docs/modules/5.0.x/modules/usrloc.html#usrloc.p.handle… ) 2) I haven testing with the following settings. a. tcp_crlf_ping=yes b. tcp_keepcnt = 3 c. tcp_keepidle = 5 With the above I see the TCP keep alives coming in every 75 seconds. If I tcp_keepintvl = 10 then I see TCP keep alives going out from Kamailio to the phone. As per https://www.kamailio.org/wiki/cookbooks/5.0.x/core#tcp_keepintvl it says "Time interval between keepalive probes, when the previous probe failed". Looking at my captures Kamilio sends out the TCP keep alive and gets it back. Is Kamailio not seeing it? With the above it seems to be working the way I want it but I want to make sure that I am doing it right. 3) For the devs on here how hard would it be to implement handle_lost_tcp for DB-Only? TIA and a happy new year to all. Regards, Dovid

2 1

KSR.sdpops.remove_media is not working as expected
by Miteshkumar Thakkar 06 Jan '20

06 Jan '20

Hi, I wants to remove media type "image" from SDP. For that I have tried to use KSR.sdpops.remove_media but it is not working. Not working in the sense that there is no effect of that function on SDP. I am using lua. Kindly find more details below. *Kamailio version*: kamailio 5.2.5 (x86_64/linux) 62d35f *SDP to process:* INVITE sip:xxxxxxxxxx@xxxxxxxxx.com:5060 SIP/2.0 Via: SIP/2.0/UDP xxx.xxx.xxx.xxx:5060;branch=z9hG4bK-60823-1-0 From: xxxxxxxxxx <sip: xxxxxxxxxx@ xxxxxxxxxx.com:5060>;tag=xxxxx To: xxxxxxxxxx <sip: xxxxxxxxxx@ xxxxxxxxxx.com:5060> Call-ID: 1-60823(a)172.16.19.64 CSeq: 1 INVITE Contact: sip:xx@xxxxxxx:5060 Max-Forwards: 70 Content-Type: application/sdp Content-Length: 337 v=0 o=zt 53655765 2353687637 IN IP4 xxx.xxx.xxx.xxx s=- c=IN IP4 xxx.xxx.xxx.xxx t=0 0 m=image xxxx RTP/AVP udptl t38 a=sendrecv a=T38FaxVersion:0 a=T38MaxBitRate:14400 a=T38FaxRateManagement:transferredTCF a=T38FaxMaxBuffer:262 a=T38FaxMaxDatagram:176 a=T38FaxUdpEC:t38UDPRedundancy m=audio xxxx RTP/AVP 0 a=rtpmap:0 PCMU/8000 *Code snippet:* KSR.sdpops.remove_media("image") logger.log("info", "SDP:" .. headers.get("$sdp(body)")) *Log snippet:* https://pastebin.com/5JZmQUfq One more thing I would like to mention that if I do not use dialog module then the function KSR.sdpops.remove_media works. But I can not avoid using dialog module. Thanks in advance. Mitesh

3 8

dlg_set_timeout error
by Pepelux 03 Jan '20

03 Jan '20

Hi all I'm trying to set a dialog timeout when a call is established: event_route[dialog:start] { if(dlg_set_timeout("10")) { xinfo("10 secs"); } } But when the time expired I obtain this error: Jan 3 11:24:20 test /usr/sbin/kamailio[18436]: CRITICAL: dialog [dlg_timer.c:199]: update_dlg_timer(): Trying to update a bogus dlg tl=0x93947b30 tl->next=(nil) tl->prev=(nil) Jan 3 11:24:20 test /usr/sbin/kamailio[18436]: ERROR: dialog [dlg_hash.c:1267]: update_dlg_timeout(): failed to update dialog lifetime # kamailio -v version: kamailio 5.3.1 (i386/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 6.3.0 Any idea? Thanks and Happy New Year

3 6

rtpproxy does not response, disable it
by Zodiac 03 Jan '20

03 Jan '20

Dear friends, I am working on a program on Kamailio and rtpengine proxy. I am wondering whether can I set Kamailio and rtpengine daemon on different physical machines. For example, I set Kamailio on a machine with IP address:10.109.247.80, and launch rtpengine daemon on another machine with interface parameter as 10.109.247.90 and ng port 7723. I set parameter in Kamailio.cfg with modparam(“rtpengine”, “rtpengine_sock”, “udp:10.109.247.90:7723”). Unfortunately I got debug message like this: ERROR: rtpengine [rtpengine.c:1710]: send_rtpp_command(): can't send command to a RTP proxy ERROR: rtpengine [rtpengine.c:1746]: send_rtpp_command(): proxy <udp:10.109.247.90:7723> does not respond, disable it ERROR: rtpengine [rtpengine.c:1616]: rtpp_test(): proxy did not respond to ping And, I also tried to set Kamailio and rtpengine daemon in a same machine,and use modparam(“rtpengine”, “rtpengine_sock”, “udp:localhost:7723”). And Kamailio can work functionally under this situation. rtpengine daemon can receive ping message from Kamailio and rtpengine daemon can work as suspected. So for the later case, is it supposed that Kamailio be in the same machine with same localhost address? Otherwise, what’s the reason for my ERROR? ------------------------------------ 北京邮电大学网络技术研究院网络与交换技术国家重点实验室田军 +86 18810315790 mozillafire(a)bupt.edu.cn ------------------------------------

5 10

rtjson and uac_auth not updating to/from headers
by Ben Merrills 02 Jan '20

02 Jan '20

Hi, I am using rtjson module to do some call routing, as part of that I've added an additional section to the document to include authentication information. I am using the uac_auth function from within failure_route to send authentication on to the uri. This works fine... however. When the initial invite is sent, the To/From headers are updated as per the rtjson document. This isn't the case however when the uac_auth function re-sends the invite with the digest header. The original to/from are being sent. I am using the dialog module restore_mode = auto restore_dlg = 1 I assume there is something I need to call, but none of the RTJSON functions seem to be available within failure_route. Any pointers as to where I am going wrong would be greatly appreciated. Thanks in advance. Ben failure_route[TRUNKAUTH] { if (t_is_canceled()) { exit; } if(t_check_status("401|407")) { $avp(auser) = $avp(s:authUser); $avp(apass) = $avp(s:authPass); uac_auth(); t_relay(); exit; } }

2 2

Changing name of the 'versions' table
by Ben Kaufman 31 Dec '19

31 Dec '19

Is it possible to use a table other than 'version' a the version table? i.e. if I'm in a shared DB, and there's an existing table named 'version' with completely different schema, is there a way I can create a table like 'kamailio_version' with the correct schema and data and use it instead? -- Ben Kaufman STATEMENT OF CONFIDENTIALITY: The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, or the person responsible for delivering the e-mail to the intended recipient, be advised you have received this message in error and that any use, dissemination, forwarding, printing, or copying is strictly prohibited. Please notify AltiGen Communications immediately at either (888)258-4436 or via email to administrator(a)altigen.com, and destroy all copies of this message and any attachments.

3 2

Calculate call duration
by Duarte Rocha 31 Dec '19

31 Dec '19

Greetings, How sould a call duration be calculated? Let's say the call creation on Kamailio as a proxy has those steps : 1 - Invite is received 2 - Provisional responses 3 - 200 OK is received 4 - ACK to 200 OK is received 5 - BYE is received 6 - 200 OK to BYE is received Should the duration begin to count on step 3 (200-Ok Received) or 4 (ACK received) ? Should it end on the step 5 or 6? ACC module tells me that start time for CDR can either be on dialog creation or confirmation - https://www.kamailio.org/docs/modules/5.2.x/modules/acc.html#acc.p.cdr_star… - What is the dialog creation ? Is it when the INVITE is received ? - According to DIALOG module, a confirmed dialog can be "Waiting for ACK" or "Active Call". Which one is used by acc module? Best Regards,

3 2

Merry Christmas and Happy Holidays!
by Daniel-Constantin Mierla 25 Dec '19

25 Dec '19

Another year getting to its end, the season holidays are ahead, therefore it is no better time than now to express my thanks and greetings to all the friends, developers, supporting companies and community members that made 2019 an outstanding year for Kamailio project. Enjoy the holidays! Merry Christmas! Daniel * Santa is flying Kamailio! * -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com

4 3

topos: how to hide one side only
by Dmitri Savolainen 24 Dec '19

24 Dec '19

Hi all. I have Kamailio with 2 addr: kamailio_external_ip - for client interconnect kamailio_internal_ip - for local media server interconnect Like this: client - kamailio_external_ip - kamailio_internal_ip - media_server "topos" module hide sip headers for both "client" and "media_server" side. Is it true: with topos i can't hide headers only for the "client" side and show them for the "media_server"? I want full header set visible for the "media_server", but only kamailio_external_ip visible for the "client". -- Savolainen Dmitri

2 6

Getting error in auth modules- Installing Kamalio 5.2
by Mahesh Kumar 24 Dec '19

24 Dec '19

Hi Team, Getting error in auth modules during Kamalio 5.2 installation and doing SIP routing, anyone know this why i am getting below error..?? Please support..!! Error Snapshot ======================================== (2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command www_authorize (params 2) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1081, column 48: unknown command, missing loadmodule? 0(2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command www_challenge (params 2) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1082, column 29: unknown command, missing loadmodule? 0(2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command consume_credentials (params 0) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1086, column 22: unknown command, missing loadmodule? 0(2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command proxy_authorize (params 2) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1097, column 41: unknown command, missing loadmodule? 0(2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command proxy_challenge (params 2) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1098, column 31: unknown command, missing loadmodule? 0(2807) ERROR: <core> [core/cfg.y:3370]: yyparse(): cfg. parser: failed to find command consume_credentials (params 0) 0(2807) CRITICAL: <core> [core/cfg.y:3510]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1102, column 22: unknown command, missing loadmodule? ======================================== Commands in Kamalio.cfg =================================================== route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!www_authorize("192.168.1.67","subscriber")) { www_challenge("$td","0"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("$fd","subscriber")) { proxy_challenge("$fd","0"); break; }; consume_credentials(); # Forward to SDIN S3 rewritehostport("uk.sdin.bt.net:5060"); forward(uk.sdin.bt.net,5060); break; } route[4] { # ----------------------------------------------------------------- # CANCEL or ACK Message Handler # ----------------------------------------------------------------- # Forward to SDIN S3 rewritehostport("uk.sdin.bt.net:5060"); forward(uk.sdin.bt.net,5060); break; } ========================================================

2 1

Kamailio at 36c3, Happy holidays
by Henning Westerholt 24 Dec '19

24 Dec '19

Hello, I will be at the 36c3 [1] congress in Leipzig. So, if you are also there and want to chat about Kamailio or other RTC topics, please contact me. I wish you all Merry Christmas and a Happy New Year! Henning [1] https://events.ccc.de/congress/2019/wiki/index.php/Main_Page -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com<https://gilawa.com/>

1 0

Not working : Using $cfg(line) to print line number
by mahesh b 24 Dec '19

24 Dec '19

Hi All, Below is the syntax am using to print the line number in kamailio configuration file. xlog("L_WARN","Hi Mahesh at line $cfg(line)\n"); Unfortunately , when i do this looks like kamailio is not starting, Any help please regarding what am i missing here. I tried Xlogl as well, which doesnt print the line number by default in my setup. This is the details i had read to understand config file attributes : $cfg(key) - Config File Attributes Attributes related to configuration file. The key can be: - line - return the current line in config - name - return the name of current config file - file - return the name of current config file - route - return the name of routing block Example: send_reply("404", "Not found at line $cfg(line)")

2 2

rtpproxy_manage() doesn't recognize SDP when Content-Length is not present
by Leonid Fainshtein 22 Dec '19

22 Dec '19

Hi, According to RFC-3261 p.20.14, the Content-Length header field must be present only if a stream-base transport protocol (such as TCP) is used. Therefore, in the case of the UDP transport protocol, this field is optional. Unfortunately, the rtpproxy_manage() function in Kamailio v.5.2.5 doesn't recognize the SDP body when the Content-Length header field is not present: Dec 22 08:58:34 pbx kamailio[13456]: 4(13488) WARNING: {1 1 INVITE wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64} sanity [sanity.c:585]: check_cl(): content length header missing in request Dec 22 08:58:34 pbx kamailio[13456]: 4(13488) INFO: {1 1 INVITE wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64} <script>: rtproxy ei. $source:81.xxx.xxx.xxx, INVITE sip:098232787@xxx.xxx.xxx.xxx:5060;user=phone $ Dec 22 08:58:34 pbx kamailio[13456]: 4(13488) ERROR: {1 1 INVITE wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64} rtpproxy [rtpproxy_funcs.c:182]: extract_body(): failed to get the content length in message Dec 22 08:58:34 pbx kamailio[13456]: 4(13488) ERROR: {1 1 INVITE wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64} rtpproxy [rtpproxy.c:2271]: force_rtp_proxy(): can't extract body from the message Dec 22 08:58:34 pbx rtpproxy[1386]: DBUG:GLOBAL:get_command: received command "13498_4 LSEIc0,101 wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64 10.70.227.183 13592 d5k0w3ft-CC-1116-OFC-253;1 as0bf73ed7;1" Dec 22 08:58:34 pbx rtpproxy[1386]: INFO:GLOBAL:handle_command: lookup request failed: session wrjxwyuke5ukvvwwxd00zwtu0ktfuzuf(a)10.18.5.64, tags d5k0w3ft-CC-1116-OFC-253;1/as0bf73ed7;1 not found Dec 22 08:58:34 pbx rtpproxy[1386]: DBUG:GLOBAL:rtpc_doreply: sending reply "0\n" Also, the textops' has_body() function always checks the “Content-Length” presence that is not 100% correct behavior. Just for your information, the problem was discovered in a system where Huawei SoftX3000 is used. It looks like the softswitch removes the “Content-Length” field in an attempt to decrease size of SIP message when it is too long. If the user disables some codecs in their SIP phone then SoftX3000 keeps the “Content-Length” untouched. Should I open a bug regarding this matter? Best regards, Leonid Fainshtein Xorcom Ltd

2 1

Disabling weak SSL Cypher suites
by Arik Halperin 22 Dec '19

22 Dec '19

Hello, How can I disable: TLS_RSA_WITH_RC4_128_SHA (0x5) INSECURE128 TLS_RSA_WITH_RC4_128_MD5 (0x4) INSECURE128 What should I put in cypher_list in order to disable the above? I would also like support TLS 1.2 and TLS 1.3, but remove support for 1.0 and 1.1 Thanks, Arik Halperin

3 5

Need support
by Srikanth Magloori 21 Dec '19

21 Dec '19

Hi Team, We are using your product Kamalio in Call Recording services. We are planning for Performance testing of our recording system. Currently we have bypassed Twilio and Kamailio. Generating Calls using SIPP directly to VOIP. So, we want calls to route through KAMAILIO -> VOIP. So performance can be bit realistic. Any help is greatly appreciated! Thanks Srikanth

4 3

Questions about Presence
by Володимир Іванець 20 Dec '19

20 Dec '19

Hello! I'm testing Kamailio as a presence server with configuration suggested by https://kb.asipto.com/kamailio:presence:k43-blf tutorial. When I set presence module subs_db_mode setting to 0 or 2 (did not test with 1 and 3 seemed to have no problems) I was getting "DEBUG: presence [notify.c:1234]: publ_notify(): Could not find subs_dialog" message after Kamailio received some PUBLISH requests. And NOTIFY is not being generated. It appears to be a mistake. There should be an active watcher according to Expires header values of the previous SUBSCRIBE request and the response to it. I could not find how to get the list of active watchers from Kamailio memory. *Is it possible or it can be done only by adding extra debug line in get_subs_dialog function?* Also I found that after setting pua module db_mode setting to 0, Kamailio is still writing records to presentity table. And it is constantly queried "select `username`,`domain`,`etag`,`event` from `presentity` where `expires`<1576584910 AND `expires`>0 order by username" during the run time. *Is it correct behavior?* Thank a lot!

2 2

Kamailio Product Support
by Simal Mathai 20 Dec '19

20 Dec '19

Hi Team, We are deploying Kamailio 5.3.1 on CentOS 7 for testing with a known carrier in Europe. We would like to get support for the product installation. Regards, Simal Mathai O: +1 214 242 5975 [cid:image001.png@01D13657.67E2B360]<http://www.tekvizion.com/> Please follow us on LinkedIn and Twitter [cid:image002.png@01D13657.67E2B360]<https://www.linkedin.com/company/tekvizion?trk=top_nav_home>[cid:image003.png@01D13657.67E2B360]<https://twitter.com/tekvizion>

2 1

how to detect "failure to add branches"?
by Juha Heinanen 20 Dec '19

20 Dec '19

In route block I call t_on_failure, t_on_branch_failure, and t_on_branch. If branch route fails like this: Dec 15 08:52:19 box /usr/bin/sip-proxy[84346]: ERROR: tm [ut.h:284]: uri2dst2(): failed to resolve "foo.tutpro.com" :unresolvable A or AAAA request (-7) Dec 15 08:52:19 box /usr/bin/sip-proxy[84346]: ERROR: tm [t_fwd.c:1738]: t_forward_nonack(): failure to add branches failure_route or tm:branch-failure event_route is not executed. Is there a way to catch such a failure? -- Juha

3 5

TLS testing (with sipp)
by Sebastian Damm 19 Dec '19

19 Dec '19

Hi, I'm trying to construct an end-to-end encrypted signalling test through our setup. I thought I could use sipp for that, as it supports TLS according to the man page. However, when I try to run it, I get this error: FI_init_ssl_context: SSL_CTX_use_certificate_file failed. I searched the web; however, all similar questions end up without answers. I tried specifying a local key and cert without success. I'd think I should not need a cert for my client, though. Has anyone ever successfully conducted an automated TLS test? I'm open to using a different tool if necessary. Thanks for all hints or examples. Regards, Sebastian -- Sebastian Damm Voice Engineer __________________________________________ sipgate GmbH Gladbacher Straße 74 | 40219 Düsseldorf

4 6

Kamailio SIP TLS Troubleshooting
by Sudhakar Parasher 19 Dec '19

19 Dec '19

Hi Experts. Need your opinion on below part related to kamailio I am using SIP Kamailio module Version for the SIP Registrations from the Client mobile phones using Android and IOS which is Over TLSv1.2 , So in nutshell the SIP Signaling is TLS version 1.2 encrypted and Customer is requesting for the forward of the unencrypted SIP signaling messages especially the SIP Registration messages to their probe solutions without storing the SIP messages locally in the Kamailio Database Question :Would it not be possible for Kamailio imply “mirror” all the SIP messages related to all SIP REGISTER dialogs (after removing TLS for inbound messages and prior to adding TLS for outbound message) to a designated IP Address and Port? No need for local database storage. No need for encapsulation. No mirroring of other messages/dialogs. Cheers Sudhakar

4 10

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users