- sr-users - kamailio.org

What happens when using exit or return in branch route in parallel branching?
by Benoit Panizzon 31 Jan '24

31 Jan '24

Hi I was wondering what exactly happens with parallel branching in this situation: branch_route[BR_T] { if (condition) { # Stuff below not required exit or return } do other stuff before relaying } Will this break, stop the processing of all branches with higher index as the one being processed? From what I observe, I fear this is the case. Could I safely use return(1) (vs return which probably is return(0) thus eq exit)? Or would the only safe option be to wrap the 'other stuff' in an else statement? Mit freundlichen Grüssen -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

2 5

install location when compiling
by David Villasmil 30 Jan '24

30 Jan '24

Hello guys, i compiled kamailio and i want it installed on debian's deb location, i.e.: /etc/kamailio /usr/lib/x86_64-linux-gnu/kamailio/modules etc.. I know if i do make prefix=/ all make prefix=/ install the config will end up on /etc/kamailio, but then the modules will be on /lib64... i don't see a way of doing this, is there? Thanks! Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

1 0

Same number of max concurrent requests on backends
by Unai Rodriguez 30 Jan '24

30 Jan '24

Dear List, We're load balancing MRCP requests using Kamailio dispatcher module's call load distribution algorithm. We want to achieve the same maximum number of concurrent sessions on each MRCP backend but because the duration of each request varies, we’re unable to achieve this (at the moment we send the same number of requests to each backend but they all have different maximum concurrent requests). Is there a way/module that will send requests to the backend with the least number of ongoing sessions? My guess is, this module needs to connect to the backends to know their status. Any pointers appreciated. Thank you With best wishes, Unai Rodriguez

3 6

Kamailio 5.6 (and 5.7) core dumping.
by Mattis Lind 29 Jan '24

29 Jan '24

Hello Kamailio list! We have a scenario that makes use of the UAC-module to send SIP MESSAGE and then in some cases the Kamailio process core dumps after some time after processing messages. I have been able to gather a core dump which shows this backtrace appended below. We are using Kamailio 5.6 retrieved from the kamailio repository: http://deb.kamailio.org/kamailio56. We are running Kamailio in a Docker container which runs on "5.10.0-25-cloud-amd64 #1 SMP Debian 5.10.191-1 (2023-08-16) x86_64 GNU/Linux" We have previously tried to use Kamailio 5.7 but it gave the same type of crashes. We have been using the uac module a lot but it is just in this scenario we get a core dump. We have some kind of relation to a specific scenario but it can take from several seconds from the last SIP message of this scenario up to 50 minutes until the crash occurs. To me this sounds like some kind of cleanup that is not handled properly. The back trace indicates that free of shared memory could be the issue, but I don't know the code unfortunately. The last things we see in the log file is: 2024-01-23T13:18:08.828+01:00 Jan 23 12:18:08 /usr/sbin/kamailio[4789]: INFO: <script>: Incoming SIP TCP request conid 21 call-id un0rihsRLJLvP-grn6LO-A 2024-01-23T13:18:08.835+01:00 Jan 23 12:18:08 /usr/sbin/kamailio[4789]: INFO: <script>: Incoming SIP TCP request conid 21 call-id WQjhldpRJbxjZRYe7fWgbw 2024-01-23T13:18:08.860+01:00 Jan 23 12:18:08 /usr/sbin/kamailio[4795]: CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 49 2024-01-23T13:18:09.486+01:00 Jan 23 12:18:09 /usr/sbin/kamailio[4751]: ALERT: <core> [main.c:783]: handle_sigs(): child process 4777 exited by a signal 11 2024-01-23T13:18:09.486+01:00 Jan 23 12:18:09 /usr/sbin/kamailio[4751]: ALERT: <core> [main.c:787]: handle_sigs(): core was generated 2024-01-23T13:18:09.516+01:00 Jan 23 12:18:09 /usr/sbin/kamailio[4751]: INFO: <core> [core/sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized 2024-01-23T13:18:09.570+01:00 Started /root/sipconfig/startkamailio.sh 2024-01-23T13:18:09.570+01:00 info: :-) Starting Kamailio Just before all the crashes we see the "CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 49" log line. Best regards, Mattis Lind # gdb /usr/sbin/kamailio /core *GNU gdb (Debian 10.1-1.7) 10.1.90.20210103-git* Copyright (C) 2021 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html > This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <https://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from /usr/sbin/kamailio... (No debugging symbols found in /usr/sbin/kamailio) warning: Can't open file /dev/zero (deleted) during file-backed mapping note processing [New LWP 4777] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/sbin/kamailio -DD -M 18 -m 192 -A serverId=17173 -A sendTraceLocal="sip:10'. Program terminated with signal SIGSEGV, Segmentation fault. #0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 77 ../sysdeps/x86_64/multiarch/strlen-evex.S: No such file or directory. (gdb) bt full #0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 No locals. #1 0x00007f5425e34b78 in __vfprintf_internal (s=s@entry=0x55a06e969a60, format=format@entry=0x55a06e558020 "%s: %.*s%s%s%sBUG: qm: fragm. %p (address %p) beginning overwritten (%lx)! Memory allocator was called from %s:%u. Fragment marked by %s:%lu. Exec from %s:%u.\n", ap=ap@entry=0x7ffd6bebfb50, mode_flags=mode_flags@entry=0) at vfprintf-internal.c:1647 len = <optimized out> step0_jumps = {0, 1717, 1621, 3413, 3317, 3997, 2677, 2837, 3613, 1773, 4309, 4445, 3517, 4437, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 533, 533, 4101} space = <optimized out> is_short = <optimized out> use_outdigits = 0 outc = <optimized out> step1_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 1773, 4309, 4445, 3517, 4437, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 533, 533, 0} group = 0 prec = -1 step2_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 4309, 4445, 3517, 4437, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 533, 533, 0} string = 0x756d6f7266222c22 <error: Cannot access memory at address 0x756d6f7266222c22> left = 0 is_long_double = <optimized out> width = 0 signed_number = <optimized out> step3a_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 4213, 0, 0, 0, 4389, 2789, 4197, 3917, 3221, 0, 0, 0, 0, 1925, 0, 0, 0, 0, 0, 0} alt = <optimized out> showsign = 0 is_long = 0 is_char = <optimized out> pad = <optimized out> step3b_jumps = {0 <repeats 11 times>, 3517, 0, 0, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 0, 0, 0} step4_jumps = {0 <repeats 14 times>, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 0, 0, 0} args_value = <optimized out> is_negative = <optimized out> number = {longlong = <optimized out>, word = <optimized out>} base = <optimized out> the_arg = {pa_wchar = 4777 L'\x12a9', pa_int = 4777, pa_long_int = 4777, pa_long_long_int = 4777, pa_u_int = 4777, pa_u_long_int = 4777, pa_u_long_long_int = 4777, pa_double = 2.3601515901836347e-320, pa_long_double = 1.74131181638025811763e-4947, pa_float128 = 3.09319115455554459548860449034534676e-4962, pa_string = 0x12a9 <error: Cannot access memory at address 0x12a9>, pa_wstring = 0x12a9 <error: Cannot access memory at address 0x12a9>, pa_pointer = 0x12a9, pa_user = 0x12a9} spec = 115 's' _buffer = {__routine = 0x4, __arg = 0xd, __canceltype = 1855363680, __prev = 0xe0} _avail = <optimized out> thousands_sep = 0x0 grouping = 0xffffffffffffffff <error: Cannot access memory at address 0xffffffffffffffff> done = 238 f = 0x55a06e5580a7 "s:%lu. Exec from %s:%u.\n" lead_str_end = 0x55a06e558020 "%s: %.*s%s%s%sBUG: qm: fragm. %p (address %p) beginning overwritten (%lx)! Memory allocator was called from %s:%u. Fragment marked by %s:%lu. Exec from %s:%u.\n" end_of_spec = <optimized out> work_buffer = "h\r\000\000\000\000\000\000\000\000\000\000\060\000\000\000\000\000\000\000\375\177\000\000 \372\353k\375\177\000\000\237MSn\n\000\000\000\000\000\000\000\240U", '\000' <repeats 18 times>, "P\225Un\240U\000\000\000\000\000\000[\214A\323\f\000\000\000\000\000\000\000\377\377\377\377\377\377\377\377\206\002", '\000' <repeats 14 times>, "\004\000\000\000\000\000\000\000 \367\353k\375\177\000\000\301\225Un\240U\000\000\323\262\vn\240U\000\000\000\000\000\000\000\000\000\000s\374On\240U\000\000W\225Un\240U\000\000\350>\212\027T\177\000\000 \323\365$T\177\000\000\060\a\354k\375\177\000\00--Type <RET> for more, q to quit, c to continue without paging-- 0\220\371\227n\240U\000\000"... workend = 0x7ffd6bebf9f8 "" ap_save = {{gp_offset = 16, fp_offset = 48, overflow_arg_area = 0x7ffd6bebfc30, reg_save_area = 0x7ffd6bebfb70}} nspecs_done = 10 save_errno = 4 readonly_format = 0 do_longlong_number = <optimized out> __result = <optimized out> #2 0x00007f5425ec079f in __vsyslog_internal (pri=<optimized out>, fmt=0x55a06e558020 "%s: %.*s%s%s%sBUG: qm: fragm. %p (address %p) beginning overwritten (%lx)! Memory allocator was called from %s:%u. Fragment marked by %s:%lu. Exec from %s:%u.\n", ap=0x7ffd6bebfb50, mode_flags=0) at ../misc/syslog.c:233 now_tm = {tm_sec = 8, tm_min = 18, tm_hour = 12, tm_mday = 23, tm_mon = 0, tm_year = 124, tm_wday = 2, tm_yday = 22, tm_isdst = 0, tm_gmtoff = 0, tm_zone = 0x55a06e94c5e0 "UTC"} now = 1706012288 fd = <optimized out> f = 0x55a06e969a60 buf = 0x0 bufsize = 0 msgoff = 21 saved_errno = <optimized out> failbuf = "`\232\226n\240U\000\000\000\204\201\247[\214A\323`\374\353k\375\177\000\000\300p\371%T" clarg = {buf = <optimized out>, oldaction = <optimized out>} #3 0x00007f5425ec0c46 in __syslog (pri=<optimized out>, fmt=<optimized out>) at ../misc/syslog.c:117 ap = {{gp_offset = 48, fp_offset = 48, overflow_arg_area = 0x7ffd6bebfc70, reg_save_area = 0x7ffd6bebfb70}} #4 0x000055a06e3b7839 in ?? () No symbol table info available. #5 0x000055a06e3bc039 in qm_free () No symbol table info available. #6 0x000055a06e3c7c28 in qm_shm_free () No symbol table info available. #7 0x00007f542325fb8e in uac_send_tm_callback () from /usr/lib/x86_64-linux-gnu/kamailio/modules/uac.so No symbol table info available. #8 0x00007f5424a2f002 in run_trans_callbacks_internal () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #9 0x00007f5424a2f179 in run_trans_callbacks () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #10 0x00007f54249d5e8c in free_cell_helper () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #11 0x00007f5424aa8f82 in wait_handler () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #12 0x000055a06e37a263 in ?? () No symbol table info available. #13 0x000055a06e37a79d in ?? () No symbol table info available. #14 0x000055a06e37acc6 in timer_main () No symbol table info available. #15 0x000055a06e0a5f62 in main_loop () No symbol table info available. --Type <RET> for more, q to quit, c to continue without paging-- #16 0x000055a06e0b120c in main () No symbol table info available.

2 3

How to achieve conversion from 180 to 183sdp
by mm e 29 Jan '24

29 Jan '24

When receiving to-tag and returning 180 ring without SDP body, how can it be converted into 183 with SDP and returned to from-tag. I want to realize that when I receive 180 no sdp, I will play an audio clip for the from-tag.： INVITE (SDP) ──────────────────────────> │ 100 Trying <────────────────────────── │ │ INVITE (SDP) │ ──────────────────────────> 100 Trying │ <────────────────────────── 180 Ringing │ <────────────────────────── 183 Session Progress (SDP) │ <────────────────────────── │

2 1

usrloc database duplicate keys issue
by Benoît Panizzon 29 Jan '24

29 Jan '24

Hi I have come across an issue with the usrloc database on kamailio 5.6 and 5.7 Jan 26 07:19:45 dev-cpereg01 kamailio[2708456]: ERROR: <core> [db_query.c:244]: db_do_insert_cmd(): error while submitting query Jan 26 07:19:45 dev-cpereg01 kamailio[2708456]: ERROR: usrloc [ucontact.c:686]: db_insert_ucontact(): inserting contact in db failed somedudetp0216 (uloc-65b237f8-28983d-1) Jan 26 07:19:45 dev-cpereg01 kamailio[2708456]: ERROR: usrloc [urecord.c:419]: wb_timer(): inserting contact into database failed (aor: somedudetp0216) settings: # ----- usrloc params ----- modparam("usrloc", "db_url", DBLOCAL) modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", 0) modparam("usrloc", "ka_mode", 0) modparam("usrloc", "ka_filter", 1) modparam("usrloc", "timer_procs", 1) modparam("usrloc", "ka_from", "sip:ping@sip.imp.ch") modparam("usrloc", "server_id_filter", 1) # Use DMQ to sync userloc loadmodule "dmq_usrloc.so" # Replicate usrloc via dmq # Enable userloc sync modparam("dmq_usrloc", "enable", 1) # Do a full sync on start modparam("dmq_usrloc", "sync", 1) I assume, when kamailio is being restartet there are some expired entries still present in the database which kamailio tries to insert on a new registration. This leads to this duplicate key error. Is there a way to tell kamailio to use 'replace into' instread of 'insert into'? Solution for now, is to manually delete expired entries from the database. -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

3 6

Heads-up: testing needed for major OpenSSL refactoring
by Richard Chan 27 Jan '24

27 Jan '24

Hello Kamailio community, After the January refactoring of OpenSSL integration, configurations that initialise libssl in rank 0 (thread #1) are likely to trigger errors more aggressively. This type of configuration has all along been broken due to OpenSSL use of thread-local variables. The first "victim" is https://github.com/kamailio/kamailio/issues/3727 — the configuration has dispatcher + db_unixodbc (+ some driver) — this configuration initialises libssl in rank 0(thread #1). I have a couple of PRs in the queue for db_unixodbc, db_mysql (PostgreSQL may need similar attention). master and 5.7 branches are affected Regards Richard

1 0

LCR logic
by Social Boh 27 Jan '24

27 Jan '24

Hello, LCR module logic is : When the function /load_gws()/ is called, matching gateways (that are not currently designated as defunct) are ordered for forwarding purposes as follows: 1. according to longest Request-URI user part match 2. according to tuple's priority 3. according to tuple's randomized weight or, if priority_ordering parameter is set to value 1, as follows: 1. according to tuple's priority 2. according to tuple's randomized weight and Smaller priority value means higher priority (highest priority value being 0 and lowest being 255). so I have 3 lcr_rule_target use the same lcr_rule entry but 3 different Gateways and priority. So the order of rules would be longest Request-URI (same) and the priority but the result is: added matched_gws[0]=[3, 5, 200, 2193562] added matched_gws[1]=[1, 5, 2, 6888519] added matched_gws[2]=[2, 5, 50, 2159388] same prefix but first rule target with priority 200 and then 2 and then 50. I think the result would be priority 2,50 and 100. ¿Or not? --- I'm SoCIaL, MayBe

2 2

DMQ dialog sync question
by Stefan-Cristian Mititelu 26 Jan '24

26 Jan '24

Hi, I'm trying a DMQ dialog sync up setup with 2 x Kamailios. I have this scenario: 1. Kamailio1 receives INVITE and sends KDQM to Kamailio2 to sync up dialog => OK 2. Kamailio2 receives 200OK 3. Kamailio2 does not send anything back to Kamailio1 to update dialog state => not OK, i expected a KDMQ to be send back to Kamailio1 to update dialog state I was wondering if DMQ module supports the above? I am using 5.6 version of kamailio, and I am curios if this might be implemented in later branches? Thank you, Stefan

2 3

How to correctly drop a branch?
by Benoît Panizzon 26 Jan '24

26 Jan '24

Hi https://www.kamailio.org/wiki/cookbooks/devel/pseudovariables#branch_name_-… "Assigning $null to uri attribute will drop the branch, for the rest of attributes will just set the value to null." Where do I need to assing $null to the brach URI to get it dropped? And what happens to the index, is there a gap, or do the subsequent branches get re-indexed so they don't match with the ulc indexes anymore? Actual example, I have multiple contacts I would like to add to branches. Two of the contacts are from the location database + an additional contact. # Basic Branch: $ru = $(ulc(aor=>addr)[0]); $du = $(ulc(aor=>received)[0]); $fs = $(ulc(aor=>socket)[0]); # Additional Branch: append_branch($(ulc(aor=>addr)[1])); $(branch(dst_uri)[-1]) = $(ulc(aor=>received)[1]); $(branch(send_socket)[-1]) = $(ulc(aor=>socket)[1]); and so on, actually a loop over all ulc contacts. # Lasst Additional Branch, point to other registrar, not to a usrloc location. append_branch($ru); $(branch(dst_uri)[-1]) = "sip:other-registrar:5060;transport=udp"; $fsn = "LocalUDPv4"; $(branch(send_socket)[-1]) = $fs; t_on_branch("BR_T"); branch_route[BR_T] { $var(socket) = $(ulc(aor=>socket)[$T_branch_idx]); if ($var(socket) == 0) { xlog("L_INFO", "$cfg(route): DROPPING BRANCH: $T_branch_idx No local socket on this registrar\n"); $(branch(uri)[$T_branch_idx]) = $null; } } I don't get this right! Call is still sent to that contact. -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

1 2

Change in LCR Debug
by Social Boh 26 Jan '24

26 Jan '24

Hello, using DEBUG with LCR module to see how the module apply the rules, I see he use Gateway Index in the list. The Gateway Index could be different to Gateway ID and maybe can confuse the correct interpretation about the use of the rules. Is it possible change the code: matched_gws[gw_index].gw_index = t->gw_index; matched_gws[gw_index].rule_id = rule->rule_id; matched_gws[gw_index].prefix_len = pl->prefix_len; matched_gws[gw_index].priority = t->priority; matched_gws[gw_index].weight = t->weight * (kam_rand() >> 8); matched_gws[gw_index].duplicate = 0; LM_DBG("added matched_gws[%d]=[%u %u, %u, %u, %u]\n", gw_index, t->gw_index, pl->prefix_len, t->priority, matched_gws[gw_index].weight); to use gateway ID and not gateway Index? Thank you Regards -- --- I'm SoCIaL, MayBe

1 0

How to get media IP
by mm e 26 Jan '24

26 Jan '24

When receiving a call I get the following message： INVITE sip:123456789@192.168.1.118:29363 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.118:65178;branch=z9hG4bK-d87543-4a4a6b6c49541b2c-1--d87543-;rport Max-Forwards: 70 Contact: <sip:96341@192.168.1.118:65178> To: "123456789"<sip:123456789@192.168.1.119:29363 > From: "96341"<sip:96341@192.168.1.119:29363 >;tag=af3c7c31 Call-ID: OTFhN2M2YmRmNmU2N2I1ZmQxNmM4ODg4YzRiZmQyNTc. CSeq: 1 INVITE Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO Content-Type: application/sdp User-Agent: eyeBeam release 1011d stamp 40820 Content-Length: 339 v=0 o=- 3 2 IN IP4 192.168.1.118 s=CounterPath eyeBeam 1.5 c=IN IP4 192.168.1.118 t=0 0 m=audio 32170 RTP/AVP 0 8 18 101 a=alt:1 1 : +YhwgPgy ayLEx4wo 192.168.1.118 32170 a=fmtp:18 annexb=no a=fmtp:101 0-15 a=rtpmap:18 G729/8000 a=rtpmap:101 telephone-event/8000 a=sendrecv How to print the media IP in SDP separately in the log? I didn't find the Pseudo-Variables..can you help me

3 2

412 Conditional request failed
by satyaprakash ch 26 Jan '24

26 Jan '24

Hi There were two PUBLISH requests were sent by the Kamailio Proxy server to the Kamailio Presence server. Processing of the first PUBLISH request resulted in the presentity table being updated - the "etag" changed from "a.1705053846.16611.21.1" to "a.1705053846.16613.23.2" Processing of the second PUBLISH failed because it also attempted to update the etag in the presentity table but at this point in time there was no match to the original etag value in the database Logs in kamailio.log: ------ ps_db_update_presentity(): No E-Tag match a.1705053846.16611.21.1 DEBUG: tm [t_reply.c:637]: _reply_light(): reply sent out - buf=0x7f81e5ca5fc0: SIP/2.0 412 Conditio... shmem=0x7f81de6da068: SIP/2.0 412 Conditional request failed. Will any one suggest how to resolve the issue of 412 conditional request failed.

2 2

Is the Contact header required for the dialog module?
by Unai Rodriguez 26 Jan '24

26 Jan '24

Dear List, I’m trying to set up the dialog module and I keep getting the error "bad sip message or missing Contact hdr”: --- Jan 23 11:34:17 server.example.com kamailio[2495]: 16(2511) ERROR: {1 78451036 INVITE 2ef1d082-3486-123d-0abc-02c8e9c6c24e} dialog [dlg_handlers.c:219]: populate_leg_info(): bad sip message or missing Contact hdr Jan 23 11:34:17 server.example.com kamailio[2495]: 16(2511) ERROR: {1 78451036 INVITE 2ef1d082-3486-123d-0abc-02c8e9c6c24e} dialog [dlg_handlers.c:952]: dlg_new_dialog(): could not add further info to the dialog --- This is for MRCP traffic and the SIP INVITEs do not contain the Contact header. They look like this: ---- INVITE sip:some.mrcp.server.example.com:8060 SIP/2.0 Via: SIP/2.0/TCP 10.10.10.10:5099;branch=z9hG4bK5Kpey3r13SBNQ Max-Forwards: 70 From: <sip:10.10.10.10:5099>;tag=134a3eKD2a8Ua To: <sip:some.mrcp.server.example.com:8060> Call-ID: 051df0ff-3541-123d-f090-02f373ff014c CSeq: 78491159 INVITE User-Agent: google_stt Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, PRACK, MESSAGE, SUBSCRIBE, NOTIFY, REFER, UPDATE Supported: timer, 100rel Content-Type: application/sdp Content-Disposition: session Content-Length: 329 v=0 o=FreeSWITCH 2474358185109188492 5282339568667506935 IN IP4 10.10.10.10 s=- c=IN IP4 10.10.10.10 t=0 0 m=application 9 TCP/MRCPv2 1 a=setup:active a=connection:new a=resource:speechrecog a=cmid:1 m=audio 12034 RTP/AVP 0 8 96 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:96 L16/8000 a=sendonly a=mid:1 ---- According to the RFC, the Contact header is not mandatory (https://datatracker.ietf.org/doc/html/rfc3261#section-8.1.1) and I don’t have an easy way of adding the Contact header to the INVITEs. Is there a way to configure Kamailio’s dialog module to do without the Contact header? Any pointers appreciated. Thank you so much With best wishes, Unai Rodriguez

3 5

How to assign xavp array to htable?
by Benoit Panizzon 26 Jan '24

26 Jan '24

Hi List Via sql_xquery I get a stacked xavp aka array. I would like to store that stacked xavp into a hash table for later usage in other transactions. Is this possible? Via xarp_parameters explode or implode does not work as that would stringy the same key multiple times. Mit freundlichen Grüssen -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

3 3

How to set a branch specific variable?
by Benoit Panizzon 25 Jan '24

25 Jan '24

Hi Gang I would like to set a variable specific to the branch. Is there a way? append_branch($var(aor1)); $(branch(dst_uri)[-1]) = $var($dst1) $(branch(want_plus)[-1]) = 1; append_branch($var(aor2)); $(branch(dst_uri)[-1]) = $var($dst2) $(branch(want_plus)[-1]) = 0; t_on_branch("BR_T"); branch_route[BR_T] { if ($branch(want_plus)) { $rU = "+" + $rU; } } Or would there be a way to query the index of the added branch so I could stack an avp with that index to access in the branch route? Mit freundlichen Grüssen -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

1 0

Re: STIR/SHAKEN
by Anthony Wittig 25 Jan '24

25 Jan '24

Hey everyone, I've set it up so that when the invite comes into Kamailio I suspend the transaction (save the transaction info in sht) and use dispatcher to send a request to our NSS server. On the reply from NSS I throw the identity header into a sht and continue the original transaction. Does that seem like the right way to do it? The next things I need to look at are: * if first NSS server doesn't respond quickly, try the second (change some timeouts and use dispatcher to try the backup) * if both NSS servers aren't working, I still want to resume the original call and let it through. Maybe I can keep track of the failures in a sht and if I have two failures, resume the original invite without the identity header. Sound like an ok plan? -- Anthony Wittig Mango Voice Developer > > ---------- Forwarded message ---------- > From: Anthony Wittig <awittig(a)mangovoice.com> > To: sr-users(a)lists.kamailio.org, david.villasmil.work(a)gmail.com > Cc: > Bcc: > Date: Tue, 23 Jan 2024 20:39:09 -0700 > Subject: [SR-Users] STIR/SHAKEN > Thanks! > > This is what I've got so far: > > 1. Kamailio invite -> NSS > 2. NSS 302 -> Kamailio > 3. Kamailio ack -> NSS > > I can see the identity header on the 302 response in my onreply_route. How > can I replay the same invite from step #1 with the identity header I get > back in step #2? Should I be doing something with a transaction on step #1, > maybe start a branch that goes out to NSS and when it comes back resume the > transaction (these are all words I've heard smart people say, but I don't > fully understand them...). > > Any pointers would be greatly appreciated, thanks! > -- > Anthony Wittig > Mango Voice Developer > > ---------- Forwarded message ---------- > From: David Villasmil <david.villasmil.work(a)gmail.com> > To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org> > Cc: > Bcc: > Date: Tue, 23 Jan 2024 14:56:52 +0100 > Subject: [SR-Users] Re: STIR/SHAKEN > Ditto, i do first approach. > > Regards, > > David Villasmil > email: david.villasmil.work(a)gmail.com > phone: +34669448337 > > > On Tue, Jan 23, 2024 at 2:38 PM Alex Balashov via sr-users < > sr-users(a)lists.kamailio.org> wrote: > >> These are all valid approaches, depending on preference. Catching 302s >> and extracting exactly the desired info might be easier with Kamailio, so I >> suppose, ceteris paribus, I'd recommend the first one. >> >> Dispatcher is a great approach! >> >> > On 23 Jan 2024, at 00:01, Anthony Wittig via sr-users < >> sr-users(a)lists.kamailio.org> wrote: >> > >> > Hello, >> > >> > We're attempting to add identities to our invites. I believe we want to >> send our invites to the NSS, and it'll reply with a 302'd invite with an >> identity header. We currently use FreeSWITCH for dialplans and media and >> Kamailio as our SBC. >> > >> > Should we be trying for something like: FreeSWITCH -> Kamailio -> NSS >> (302) -> Kamailio -> PSTN >> > >> > or would it make more sense to do: FreeSWITCH -> NSS (302) -> >> FreeSWITCH -> Kamailio -> PSTN >> > >> > Assuming we wanted Kamailio -> NSS, is using dispatcher the right >> approach? We currently use it for our two Kamailios and our FreeSWITCHs. >> We're going to have two NSS servers, one for failover. >> > >> > Any thoughts would be greatly appreciated, thanks! >> > >> > -- >> > Anthony Wittig >> > Mango Voice Developer >> > __________________________________________________________ >> > Kamailio - Users Mailing List - Non Commercial Discussions >> > To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org >> > Important: keep the mailing list in the recipients, do not reply only >> to the sender! >> > Edit mailing list options or unsubscribe: >> >> -- >> Alex Balashov >> Principal Consultant >> Evariste Systems LLC >> Web: https://evaristesys.com >> Tel: +1-706-510-6800 >> >

1 0

STIR/SHAKEN
by Anthony Wittig 23 Jan '24

23 Jan '24

Thanks! This is what I've got so far: 1. Kamailio invite -> NSS 2. NSS 302 -> Kamailio 3. Kamailio ack -> NSS I can see the identity header on the 302 response in my onreply_route. How can I replay the same invite from step #1 with the identity header I get back in step #2? Should I be doing something with a transaction on step #1, maybe start a branch that goes out to NSS and when it comes back resume the transaction (these are all words I've heard smart people say, but I don't fully understand them...). Any pointers would be greatly appreciated, thanks! -- Anthony Wittig Mango Voice Developer ---------- Forwarded message ---------- From: David Villasmil <david.villasmil.work(a)gmail.com> To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org> Cc: Bcc: Date: Tue, 23 Jan 2024 14:56:52 +0100 Subject: [SR-Users] Re: STIR/SHAKEN Ditto, i do first approach. Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337 On Tue, Jan 23, 2024 at 2:38 PM Alex Balashov via sr-users < sr-users(a)lists.kamailio.org> wrote: > These are all valid approaches, depending on preference. Catching 302s and > extracting exactly the desired info might be easier with Kamailio, so I > suppose, ceteris paribus, I'd recommend the first one. > > Dispatcher is a great approach! > > > On 23 Jan 2024, at 00:01, Anthony Wittig via sr-users < > sr-users(a)lists.kamailio.org> wrote: > > > > Hello, > > > > We're attempting to add identities to our invites. I believe we want to > send our invites to the NSS, and it'll reply with a 302'd invite with an > identity header. We currently use FreeSWITCH for dialplans and media and > Kamailio as our SBC. > > > > Should we be trying for something like: FreeSWITCH -> Kamailio -> NSS > (302) -> Kamailio -> PSTN > > > > or would it make more sense to do: FreeSWITCH -> NSS (302) -> FreeSWITCH > -> Kamailio -> PSTN > > > > Assuming we wanted Kamailio -> NSS, is using dispatcher the right > approach? We currently use it for our two Kamailios and our FreeSWITCHs. > We're going to have two NSS servers, one for failover. > > > > Any thoughts would be greatly appreciated, thanks! > > > > -- > > Anthony Wittig > > Mango Voice Developer > > __________________________________________________________ > > Kamailio - Users Mailing List - Non Commercial Discussions > > To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org > > Important: keep the mailing list in the recipients, do not reply only to > the sender! > > Edit mailing list options or unsubscribe: > > -- > Alex Balashov > Principal Consultant > Evariste Systems LLC > Web: https://evaristesys.com > Tel: +1-706-510-6800 > > __________________________________________________________ > Kamailio - Users Mailing List - Non Commercial Discussions > To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org > Important: keep the mailing list in the recipients, do not reply only to > the sender! > Edit mailing list options or unsubscribe: >

1 0

STIR/SHAKEN
by Anthony Wittig 23 Jan '24

23 Jan '24

Hello, We're attempting to add identities to our invites. I believe we want to send our invites to the NSS, and it'll reply with a 302'd invite with an identity header. We currently use FreeSWITCH for dialplans and media and Kamailio as our SBC. Should we be trying for something like: FreeSWITCH -> Kamailio -> NSS (302) -> Kamailio -> PSTN or would it make more sense to do: FreeSWITCH -> NSS (302) -> FreeSWITCH -> Kamailio -> PSTN Assuming we wanted Kamailio -> NSS, is using dispatcher the right approach? We currently use it for our two Kamailios and our FreeSWITCHs. We're going to have two NSS servers, one for failover. Any thoughts would be greatly appreciated, thanks! -- Anthony Wittig Mango Voice Developer

3 3

How to check for branches with a pending reply in MANAGE_REPLY to correctly handle rtpengine?
by Benoit Panizzon 23 Jan '24

23 Jan '24

Hi gang location database contains multiple contacts for an AOR The invite therefore is parallel branched to those multiple contacts. Each reply from each branch is handled by MANAGE_REPLY. rtpengine_manage() is called in MANAGE_REPLY to stop rtpengine processing a failed call. Unfortunately, if any of the contacts replies with an error rtpengine_manage() will stop RTP processing. Is there a way I could check if there are branches with a pending reply from within MANAGE_REPLY so I could call rtpengine_manage() only when the last reply (no pending replies) are present? Hmm, realizing, if I process the last pending error reply and a prior one got a positive reply, this would still kill media. => How do I solve this? Mit freundlichen Grüssen -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

1 0

Info: Kamailio World 2024 - Call for presentations
by Daniel-Constantin Mierla 22 Jan '24

22 Jan '24

Hello, a short note to inform that the Call For Presentations is now open for Kamailio World 2024. Everyone is welcome to submit proposal for presentations to share the knowledge about Kamailio or Real Time Communication services, security, high availability, scalability, etc. Submission form and more details are available at: - https://www.kamailioworld.com/k2024/call-for-speakers/ Cheers, Daniel -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy, Training and Development Services -- asipto.com Kamailio World Conference, April 18-19, 2024, Berlin -- kamailioworld.com

2 2

IMS registration failure
by srinidhikrs＠yahoo.com 21 Jan '24

21 Jan '24

I am trying to get imsdroid register to pcscf . But failing with 504 server timeout . Please help to figure out the reason for register failure . <is_registered_fallback2ip> in module ims_registrar_pcscf [/usr/local/lib64/kamailio/modules/ims_registrar_pcscf.so] [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/modparam.c:123]: set_mod_param_regex(): found <is_registered_fallback2ip> in module ims_registrar_pcscf [/usr/local/lib64/kamailio/modules/ims_registrar_pcscf.so] [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/sr_module.c:632]: find_mod_export_record(): found export of <pcscf_unregister> in module ims_registrar_pcscf [/usr/local/lib64/kamailio/modules/ims_registrar_pcscf.so] [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg.lex:1643]: sr_push_yy_state(): including file: route/register.cfg (/etc/kamailio_pcscf/route/register.cfg) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/sr_module.c:632]: find_mod_export_record(): found export of <pcscf_is_registered> in module ims_registrar_pcscf [/usr/local/lib64/kamailio/modules/ims_registrar_pcscf.so] [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg/cfg.c:173]: cfg_declare(): new config group has been registered: 'core' (num=56, size=224) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg/cfg.c:173]: cfg_declare(): new config group has been registered: 'tcp' (num=27, size=108) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/pt.c:138]: register_procs(): registering new processes: 0 (old) + 1 (new) = 1 (total) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg/cfg.c:173]: cfg_declare(): new config group has been registered: 'tm' (num=36, size=168) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg/cfg.c:173]: cfg_declare(): new config group has been registered: 'maxfwd' (num=1, size=4) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg/cfg.c:173]: cfg_declare(): new config group has been registered: 'siputils' (num=1, size=4) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/pt.c:138]: register_procs(): registering new processes: 1 (old) + 1 (new) = 2 (total) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg/cfg.c:173]: cfg_declare(): new config group has been registered: 'xlog' (num=1, size=4) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg/cfg.c:173]: cfg_declare(): new config group has been registered: 'dispatcher' (num=3, size=24) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg/cfg.c:173]: cfg_declare(): new config group has been registered: 'sctp' (num=19, size=76) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/pt.c:138]: register_procs(): registering new processes: 2 (old) + 1 (new) = 3 (total) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg/cfg.c:173]: cfg_declare(): new config group has been registered: 'dbg' (num=3, size=12) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg/cfg.c:173]: cfg_declare(): new config group has been registered: 'registrar' (num=11, size=56) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/cfg/cfg.c:173]: cfg_declare(): new config group has been registered: 'rtpengine' (num=5, size=20) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/pt.c:138]: register_procs(): registering new processes: 3 (old) + 1 (new) = 4 (total) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/pt.c:138]: register_procs(): registering new processes: 4 (old) + 1 (new) = 5 (total) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/pt.c:138]: register_procs(): registering new processes: 5 (old) + 1 (new) = 6 (total) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/pt.c:99]: init_pt(): registering new processes: 6 (old) + 96 (new) = 102 (total) [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/route.c:885]: fix_actions(): fixing pcscf_is_registered() [0;39;49m[0;39;49m 0(310120) DEBUG: <core> [core/route.c:885]: fix_actions(): fixing pcscf_unregister() [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=9 a=16 n=if [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=7 a=63 n=assign [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=9 a=25 n=xnotice [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=10 a=25 n=xnotice [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=11 a=25 n=xnotice [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=12 a=25 n=xnotice [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=15 a=63 n=assign [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=22 a=16 n=if [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=17 a=25 n=is_present_hf [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=18 a=25 n=pcscf_save_pending [0;39;49m[0;39;49m 4(310124) DEBUG: ims_registrar_pcscf [save.c:378]: save_pending(): registering for UL callback [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=25 a=63 n=assign [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=32 a=16 n=if [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=35 a=16 n=if [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=33 a=63 n=assign [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=81 a=25 n=append_hf [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=83 a=25 n=remove_hf [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=84 a=25 n=append_hf [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=85 a=25 n=remove_hf [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=86 a=25 n=append_hf [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=94 a=16 n=if [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=89 a=25 n=is_present_hf [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=93 a=25 n=append_hf [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=107 a=25 n=t_on_failure [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=109 a=25 n=t_on_reply [0;39;49m[0;31;49m 4(310124) ERROR: *** cfgtrace:request_route=[REGISTER] c=[/etc/kamailio_pcscf/route/register.cfg] l=111 a=5 n=route [0;39;49m[0;31;49m85(310272) ERROR: *** cfgtrace:failure_route=[REGISTER_failure] c=[/etc/kamailio_pcscf/route/register.cfg] l=316 a=16 n=if [0;39;49m[0;31;49m85(310272) ERROR: *** cfgtrace:failure_route=[REGISTER_failure] c=[/etc/kamailio_pcscf/route/register.cfg] l=311 a=25 n=t_check_status [0;39;49m[0;31;49m85(310272) ERROR: *** cfgtrace:failure_route=[REGISTER_failure] c=[/etc/kamailio_pcscf/route/register.cfg] l=312 a=26 n=send_reply [0;39;49m[0;31;49m85(310272) ERROR: *** cfgtrace:failure_route=[REGISTER_failure] c=[/etc/kamailio_pcscf/route/register.cfg] l=313 a=26 n=update_stat [0;39;49m[0;31;49m85(310272) ERROR: *** cfgtrace:failure_route=[REGISTER_failure] c=[/etc/kamailio_pcscf/route/register.cfg] l=314 a=2 n=exit

1 2

failed to open database connection
by mtohidi67＠gmail.com 20 Jan '24

20 Jan '24

Hello. I have installed Kamailio version devel on Ubuntu 22.04 and use the mysql database on the same machine. when i run systemctl status kamailio.service ● kamailio.service - LSB: Start the Kamailio SIP proxy server Loaded: loaded (/etc/init.d/kamailio; generated) Active: active (exited) since Sat 2024-01-20 11:35:09 +0330; 21min ago Docs: man:systemd-sysv-generator(8) CPU: 48ms /usr/local/sbin/kamailio[173481]: ERROR: usrloc [dlist.c:846]: register_udomain(): failed to open database connection /usr/local/sbin/kamailio[173481]: ERROR: registrar [registrar.c:767]: domain_fixup(): failed to register domain /usr/local/sbin/kamailio[173481]: ERROR: [core/route.c:1193]: fix_actions(): fixing failed (code=-1) at cfg:/usr/local/etc/kamailio/kamailio.cfg:717 /usr/local/sbin/kamailio[173481]: ERROR: [core/rvalue.c:3818]: fix_rval_expr(): failure in cfg at line: 717 col: 22 /usr/local/sbin/kamailio[173481]: ERROR: [core/rvalue.c:3818]: fix_rval_expr(): failure in cfg at line: 717 col: 22 /usr/local/sbin/kamailio[173481]: ERROR: [core/route.c:1193]: fix_actions(): fixing failed (code=-1) at cfg:/usr/local/etc/kamailio/kamailio.cfg:720 /usr/local/sbin/kamailio[173481]: INFO: [core/sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized kamailio[173463]: * already running kamailio[173463]: ...done. systemd[1]: Started LSB: Start the Kamailio SIP proxy server. In /usr/local/etc/kamailio/kamctlrc, I uncomment these lines: SIP_DOMAIN=ims.mnc55.mcc999.farazNET.org DBENGINE=MYSQL DBHOST=localhost in /usr/local/etc/kamailio/kamailio.cfg i apply this changes: auto_aliases=no alias="ims.mnc55.mcc999.farazNET.org" listen=udp:192.168.75.185:5060 listen=tcp:192.168.75.185:5060 how can i solved it?

1 1

rr, loose_route and corex alias_subdomains
by Jon Bonilla (Manwe) 19 Jan '24

19 Jan '24

Hi I'm having an issue with the double rr for mst direct routing. I'm using subdomains like 23234.mydomain.com with a wildcard certificate and I set corex modparam alias_subdomains to mydomain.com But loose_route doesn't seem to detect the rr as myself I get the message: rr [loose.c:804]: rr_do_force_send_socket(): no socket found to match second RR (sip:20141.mydomain.com:5063;transport=tls;ftag=as7107d0fe;lr;r2=on;vsf=AAAAAAAAAAADCQMaABhMS1NYRh0cRllbR0RRQG91cC5lcw--;nat=yes;pet=mst) Regarding my setup is more or less like this: kamailio.local.cfg: #!substdef "!MSTDOMAIN!mydomain.com!g" kamailio.cfg: modparam("corex", "alias_subdomains", "MSTDOMAIN") But in the cli: kamctl rpc corex.list_aliases { "jsonrpc": "2.0", "result": [ ], "id": 1319303 } I don't remember to have this issue when I was developing the mst integration. Either I missed it or can it be a regression? kamailio version is 5.6.4 at the moment. Any ideas? cheers Jon -- PekePBX, the multitenant PBX solution https://pekepbx.com

2 3

Just need some basic help
by Jere Cassidy 18 Jan '24

18 Jan '24

Hello! Thanks in advance for any help you can provide. I have a simple setup here and am struggling a bit with getting a final working solution. This is just a single direction flow from a SIP provider inbound to servers running HMPelements with CTI integration (sip endpoint). Essentially a different DN / dial number would go to a different backend server. There is no registration involved. The kamailio server therefore needs to sit between the SIP provider and the backend servers, it will be a NAT situation where private RFC1918 addresses will be used on the backend after the server receives it with public IP information. So that's it. What is the simplest way to accomplish this? If it would help - here's what ive done so far: For the Kamailio server, I have an AWS EC2 instance with a public IP bound/assigned to the main private IP. During troubleshooting, I've added another private IP to the NIC so that I could throw up another listener. I was thinking I'd need to accept the SIP on the first listener with the "advertise" directive. The second listener would not have an advertise directive so perhaps could be used to talk to the backends. I defined the WITH NAT and rtp proxy settings (pointing to the first listener below). The RTP Proxy daemon also knows about the y.y.y.y public address below. In the kamailio.cfg, I have a listener setup : listen=udp:172.24.40.28:5060 advertise y.y.y.y:5060 listen=udp:172.24.40.26:5060 then threw in a route(CMS) in the request route and created the following route block: route[CMS] { #check URI matches phone xxxxxxxxxx if (uri=~"^sip:\+1xxxxxxxxxx@") { rewritehostport("10.12.18.193:5060"); forward(uri:host, uri:port); exit; }; } I get the SIP delivered to the backend host! but the INVITE headers are stil pointing to public IPs and the SDP info is not adjusted to be a private IP as well - as follows: z.z.z.z = sip provider , y.y.y.y = public ip (aws ec2 ip). xxxxxxxxx = calling phone, ######## = called phone (matches routeCMS above) INVITE sip:+1##########@10.12.18.193:5060 SIP/2.0 Record-Route: <sip:y.y.y.y;lr> Via: SIP/2.0/UDP y.y.y.y:5060;branch=z9hG4bK28b7.56b42fdeec9f10cd13030b3711b16f4d.0 Via: SIP/2.0/UDP z.z.z.z:11000;received=z.z.z.z;rport=11000;branch=z9hG4bKQ2yQKgv7NtKQF Max-Forwards: 48 From: "" <sip:+1xxxxxxxxxx@z.z.z.z;isup-oli=0>;tag=tUF15gaNg6N6j To: <sip:+1##########@y.y.y.y> Call-ID: 9ee7e073-c7fc-46ac-a839-f3c77eaed903 CSeq: 78244364 INVITE Contact: <sip:mod_sofia@z.z.z.z:11000> User-Agent: 2600Hz Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REFER, NOTIFY Supported: path, replaces Allow-Events: talk, hold, conference, refer Privacy: none Content-Type: application/sdp Content-Disposition: session Content-Length: 278 X-FS-Core-UUID: 4e0b2928-d913-42c4-9809-f77a36d281be X-FS-Support: update_display,send_info P-Asserted-Identity: "" <sip:+1xxxxxxxxx@z.z.z.z> v=0 o=FreeSWITCH 1705572686 1705572687 IN IP4 z.z.z.z Thanks much!

2 1

Re: add a SIP custom header on a SIP response generated locally
by frédéric Gaisnon 18 Jan '24

18 Jan '24

Hi, Yes I've tried using append_to_reply() in several routes (tm:branch-failure, sl:local-response, tm:local-response, onreply_route, failure_route) but it was not applied. It works fine if a response is received or if it is generated by the configuration script but not if this response is locally generated by a kamailio module. Regards, Frédéric Gaisnon > Custom headers to the reply can be added using append_to_reply() function from textops module. Have you tried that? > > Regards, > > Fred Posner > p: +1 (352) 664-3733 > > On Jan 18, 2024, at 2:07 AM, frédéric Gaisnon via sr-users < sr-users(a)lists.kamailio.org> wrote: > > > > Hello, > > I want to add a SIP custom header on a SIP response generated locally (on the 408 generated when fr_inv_timeout is expired for example) > > I've tried functions append_hf and append_to_reply in event_route[tm:branch-failure:XXX] or event_route [tm:local-response] without any success. > > Do you have any suggestions to accomplish this ? > > Regards, > > Frédéric Gaisnon

2 1

trigger different branch route on branch added with append_branch
by Benoit Panizzon 18 Jan '24

18 Jan '24

Hi List Imagine the following situation: Two Kamailio registrar proxies handling the same domain. Location Information synced via DMQ. So if a device registers we don't know on which of the two registrar proxies. Core proxy is dispatching calls to either one of those registrars. Core also performs AOR database lookup and adds an X- header telling which AOR the call is destined to. Registrar performs lookup of that AOR in the location database and routes the call to destination. Problem: The call could be routed to the the registrar which does not hold the active socket to that client. Solution: reg_fetch_contacts, cycle the contacts and append_branch if the contact has a local socket. Next Problem: I use a failure_route to sent the call to voicemail, if not registered, busy etc. This would trigger, if we have no local socket for the registration which is on the other registrar. So I have to find a way to send the call to the other registrar. I guess I can append_branch a branch pointing to the URI of the other registrar. This would then succeed in reaching the device. Also using the failure_route would work this way if we get a remote error from behind the other registrar or no registration at all. Next Problem: I use a branch trigger to remove undesired header I do not want to send to the customer. Now imagine that AOR has two contacts, one on registered on each registrar proxy. So I end up with two destinations added with append_branch to the destination set. One points to the device of the locally registered customer device, the other one points to the other registrar where to find the other device. I use a branch route trigger to remove the X- Headers towards the customer. But I need to X- Header containing the destination AOR to still be sent to the other registrar. Is there a way to trigger a branch route for only some of the destinations added with append_branch? Or to trigger different branch routes for different destinations in one set added with append_branch? Or am I doing this completely wrong and there is an easier way? ;-) Mit freundlichen Grüssen -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

2 2

How to change uri for db_mysql ?
by iglov 18 Jan '24

18 Jan '24

Sup guyz! On debian 12 i have kamailio 5.6.3 and when I try to use db_mysql module I always get an error: kamailio[2842268]: ERROR: db_mysql [km_my_con.c:163]: db_mysql_new_connection(): driver error: Can't connect to local server through socket '/run/mysqld/mysqld.sock' I have no idea where it finds this socket cuz I don’t have it and don’t want to. Where I can change it?

4 7

add a SIP custom header on a SIP response generated locally
by frédéric Gaisnon 18 Jan '24

18 Jan '24

Hello, I want to add a SIP custom header on a SIP response generated locally (on the 408 generated when fr_inv_timeout is expired for example) I've tried functions append_hf and append_to_reply in event_route[tm:branch-failure:XXX] or event_route [tm:local-response] without any success. Do you have any suggestions to accomplish this ? Regards, Frédéric Gaisnon

3 2

Kamailio v5.7.4 Released
by Daniel-Constantin Mierla 18 Jan '24

18 Jan '24

Hello, Kamailio SIP Server v5.7.4 stable release is out. This is a maintenance release of the latest stable branch, 5.7, that includes fixes since the release of v5.7.3. There is no change to database schema or configuration language structure that you have to do on previous installations of v5.7.x. Deployments running previous v5.7.x versions are strongly recommended to be upgraded to v5.7.4. For more details about version 5.7.4 (including links and guidelines to download the tarball or from GIT repository), visit: * https://www.kamailio.org/w/2024/01/kamailio-v5-7-4-released/ RPM, Debian/Ubuntu packages will be available soon as well. Many thanks to all contributing and using Kamailio! Cheers, Daniel -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy, Training and Development Services -- asipto.com Kamailio Advanced Training, February 20-22, 2024 -- asipto.com Kamailio World Conference, April 18-19, 2024, Berlin -- kamailioworld.com

1 0

Releasing v5.7.4
by Daniel-Constantin Mierla 18 Jan '24

18 Jan '24

Hello, I am considering to release Kamailio v5.7.4 (out of branch 5.7) on Thursday, Jan 18, 2024. If anyone is aware of issues not yet on the bug tracker, report them there asap in order to have a better chance to be fixed. Cheers, Daniel -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy, Training and Development Services -- asipto.com Kamailio Advanced Training, February 20-22, 2024 -- asipto.com Kamailio World Conference, April 18-19, 2024, Berlin -- kamailioworld.com

1 1

IMS Register failure
by srinidhi 2wewew 17 Jan '24

17 Jan '24

I am trying to get imsdroid register to pcscf . But failing with 504 server timeout . PCSCF IP : 192.168.1.28 imsdroid IP : 192.168.1.212 Please help to figure out the reaso for register failure . I have attached pcap file and pcscf log file

1 0

tls.cfg and configuration
by Aymeric Moizard 17 Jan '24

17 Jan '24

Hi all, I'm using a central file to define my kamailio cfg configuration. First question: In my main kamailio.cfg, I use: include_file "kamailio-config.cfg" which contains: #!substdef "!MY_DOMAIN!kamailio.example.com!g" I would like to use the same in tls.cfg which is defined this way: modparam("tls", "config", "/etc/kamailio/tls.cfg") but I get: sr_cfg_parse(): tls.cfg:17:1: Unsupported option 'include_file' Would you advise some way to achieve my goal: ie, I would like only one file to edit my configuration options which would have an effect on both kamailio.cfg and tls.cfg Second question: Can someone confirm that #!substdef will also not have any effect when used in tls.cfg Thanks Aymeric -- Antisip - http://www.antisip.com

2 1

2024 FOSDEM VoIP Dinner
by Torrey Searle 15 Jan '24

15 Jan '24

Hello all, It is that time of year to start getting the headcount for the FOSDEM voip dinner on the Saturday of FOSDEM. Usually Daniel would get the headcount for me and I just make the booking. However Daniel can't make it this year so I'll also be taking the headcount If you want to come put your name up one the doodle I've set up for this https://doodle.com/meeting/participate/id/boAjDENe Hope to see you there! Torrey

1 0

Not checking SRV records
by Jon Bonilla (Manwe) 13 Jan '24

13 Jan '24

Hi This may be a stupid question but after a couple of hours and some headache I can't see where the problem is. I'm trying to use SRV records to relay to different servers as I've done many many times before. But in this case I'm getting a 478 from kamailio and I see that it's not trying to resolve SRV. From the log: [core/dns_cache.c:527]: _dns_hash_find(): (fs.mydomain.dev(16), 1), h=632 [core/resolve.c:784]: get_record(): lookup(fs.mydomain.dev, 1) failed [core/dns_cache.c:761]: dns_cache_mk_bad_entry(): (fs.mydomain.dev, 1, 60, 1) [core/dns_cache.c:701]: dns_cache_add(): adding fs.mydomain.dev(16) 1 (flags=1) at 632 [core/dns_cache.c:2807]: dns_a_resolve(): (fs.mydomain.dev, 0) returning -7 [core/dns_cache.c:3176]: dns_srv_sip_resolve(): (fs.mydomain.dev, 0, 0), ip, ret=-7 uri2dst2(): failed to resolve "fs.mydomain.dev" :unresolvable A or AAAA request (-7) When doing tcpdump port 53 I see A record query but no SRV SRV records of course exist although they are not being checked. dns params in kamailio: dns_try_ipv6=no dns_retr_time=1 dns_retr_no=1 dns_use_search_list=no use_dns_cache=on use_dns_failover=on dns_srv_lb=on dns_try_naptr=no dns_sctp_pref=1 dns_tcp_pref=1 dns_tls_pref=1 dns_udp_pref=1 Same exact config in another server is working. There's something I'm missing and can't see. Any hints? cheers, Jon -- PekePBX, the multitenant PBX solution https://pekepbx.com

1 1

Standard on RTP ports
by ZZ Wave 12 Jan '24

12 Jan '24

Hello. I have some rant with network security dept. Is there some standard, RFC, what port range should be used for RTP traffic, how RTP ports are selected during SIP call negotiation? Thanks.

11 25

Internal DNS resolver
by Igor Potjevlesch 12 Jan '24

12 Jan '24

Hello! I have a quick question about the internal DNS resolver and cache embedded in Kamailio. Is the ability to add an entry with dns.add_a bypass the "real" DNS lookup? So, let's say that sip.example.com is publicly resolve alternatively with 1.2.3.4 & 5.6.7.8.9, if I do a dns.add_a to add my own sip.example.com with, alternatively, 127.0.0.1 and 127.0.0.2, will it work? Thanks for your highlight! Regards, Igor. -- Cet e-mail a été vérifié par le logiciel antivirus d'Avast. www.avast.com

3 7

xavp_params_explode broken comma in value?
by Benoît Panizzon 12 Jan '24

12 Jan '24

Hey! I'm hunting down an issue with xavp_params_explode, maybe somebody has already come adross it and could confirm it exists and maybe know a solution? xavp_params_explode("a=foo;c=hello,world;e=baar", "x"); $xavp(x=>a) is 'foo' but x=>c and x=>e are null Am I right to assume the issue being caused by the comma? Is there a way to allow a comma? -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

3 4

registrar questions
by mm e 12 Jan '24

12 Jan '24

In addition to the RPC command "kamctl add username password", is there a module with a method to operate the "subscriber" database table?

2 4

Clarification on usrloc timer_interval param and contact-expires event route.
by James Lipski 11 Jan '24

11 Jan '24

Hello, Just need a bit of clarification on the usrloc parameter "timer_interval". Let's say this is configured with a value of 60 seconds; every 60 seconds, will this delete all expired contacts in the location table between runs -- as in between runs it will queue up a list of expired contacts, remove them all after the 60 seconds has elapsed, then execute the event route "event_route[usrloc:contact-expired]"? Or does the event route execute as soon as the contact expires, independent from "timer_interval" timer? Thank you.

2 1

Setting kamailio to use another DB
by SAMUEL MOYA TINOCO 11 Jan '24

11 Jan '24

Good evening everyone, I'm trying to configure my Kamailio to use another DB in case the one it commonly uses fails. Does Kamailio has any built in function to do this? Do I have to do it with an ha-proxy? Thank you in advance for your help Samuel Moya Tinoco Departamento de Sistemas y Redes Móvil: (+34) 606985997 smoya(a)vivelibre.es<mailto:smoya@vivelibre.es> [cid:image001.png@01DA431B.CC9B03A0] Soluciones inteligentes para la autonomía personal

4 4

How to know registration status
by mm e 10 Jan '24

10 Jan '24

After using the uac module to initiate registration to the remote end, is there a method to call back to notify the registration result? I want to get the registration result, such as 200 or 403

4 3

Re: force TLS RSA cipher suite (SOLVED)
by marek 10 Jan '24

10 Jan '24

good catch. thanks for the record ECC [root@sbc live]# openssl x509 -text -noout -in /etc/letsencrypt/live/<my domain>/fullchain.pem |grep -i "Public Key Algorithm" Public Key Algorithm: id-ecPublicKey certbot certonly --key-type rsa --cert-name <my domain> --manual --preferred-challenges dns RSA [root@sbc live]# openssl x509 -text -noout -in /etc/letsencrypt/live/<my domain>/fullchain.pem |grep -i "Public Key Algorithm" Public Key Algorithm: rsaEncryption but there was another problem modparam("tls", "cipher_list", "RSA") from https://kamailio.org/docs/modules/5.7.x/modules/tls.html#tls.p.cipher_list does nothing 0(2294) INFO: tls [tls_domain.c:390]: ksr_tls_fill_missing(): TLSs<default>: cipher_list='(null)' valid option is in tls.cfg cipher_list = RSA 0(2328) INFO: tls [tls_domain.c:390]: ksr_tls_fill_missing(): TLSs<default>: cipher_list='RSA' ServerHello Version 3.3 session_id[0]= cipherSuite TLS_RSA_WITH_AES_256_GCM_SHA384 Marek Cervenka Dne 2024-01-10 v 13:06 Lukas Tribus napsal(a): > > > On Wednesday 10 January 2024, marek via sr-users > <sr-users(a)lists.kamailio.org> wrote: > > hi, > > i'm trying force cipher list through options like > > modparam("tls", "cipher_list", "TLS_RSA_WITH_AES_256_CBC_SHA256") > > modparam("tls", "cipher_list", "RSA") > > > You are trying a RSA cipher. > > > ... > > > but > > ssldump -i enp2s0 port 5061 shows every time > > ServerHello > Version 3.3 > > > In TLS 1.2 > > > > session_id[0]= > cipherSuite TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 > > > But the negotiated cipher suggest that you have an ECC certificate. > > In TLSv1.2 and older, ciphers available are dependent on the > certificate type (RSA vs ECC). > > In TLSv1.3 its all different again and the certificate doesn't matter > for cipher negotiation. > > Get a RSA (2048bit) certificate instead of a ECC one from Let's > Encrypt, then you should be able to use those ciphers. > > > > Lukas

1 0

Timeout on forwarding REGISTRATION
by dries＠degendt.com 10 Jan '24

10 Jan '24

Hi all, My Kamailio server has been throwing a lot of errors during the manipulation and forwarding of registrations to my Asterisk server (192.168.96.97) using uac_req_send(); and t_relay() [core/tcp_main.c:1402]: tcp_do_connect(): connect 192.168.96.97:5060: (99) Cannot assign requested address [core/tcp_main.c:1399]: tcp_do_connect(): connect 192.168.96.97:5060 failed Cannot assign requested address When looking deeper into the code it appears that the errors are thrown when "tcp_async" is enabled. I've enabled this option a few weeks ago to make sure clients can REGISTER quickly. The parameter "tcp_reuse_port" is also set to yes. I'm suspecting that on busy moments, the destination can't be reached because no TCP connections are available. Is there any of the following parameters that I can adjust to prevent this issue? tcp_children = 25 disable_tcp = no tcp_max_connections = 63536 tcp_connection_lifetime = 3605 tcp_accept_aliases = no tcp_async = yes tcp_connect_timeout = 10 tcp_conn_wq_max = 65536 tcp_crlf_ping = yes tcp_delayed_ack = yes tcp_fd_cache = yes tcp_keepalive = yes tcp_keepcnt = 3 tcp_keepidle = 30 tcp_keepintvl = 10 tcp_linger2 = 30 tcp_rd_buf_size = 80000 tcp_send_timeout = 10 tcp_wq_blk_size = 2100 tcp_wq_max = 10485760 tcp_reuse_port=yes /* tcp_connection_match=1 */ open_files_limit=63536 A quick tcpdump doesn't show outgoing packet during the error events. Best regards, Dries

1 0

force TLS RSA cipher suite
by marek 10 Jan '24

10 Jan '24

hi, i'm trying force cipher list through options like modparam("tls", "cipher_list", "TLS_RSA_WITH_AES_256_CBC_SHA256") modparam("tls", "cipher_list", "RSA") ... but ssldump -i enp2s0 port 5061 shows every time ServerHello Version 3.3 session_id[0]= cipherSuite TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 i tried lower crypto policy to LEGACY. nothing changed https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/ht… certificates are from Lets Encrypt if that does matter OS Rocky9(RHEL9), kamailio 5.7.3 from official repo any ideas/tips? thanks Marek

2 1

Re: uac_req_send + evroute + crash
by Péter Dr. Barabás 10 Jan '24

10 Jan '24

Hello, Any idea about the crash below? I found a ticket regarding to this, I made some comments and backtraces there also: https://github.com/kamailio/kamailio/issues/3635 Now this crash is very frequently, 3-4 times every day. There is a timer mechnism, where kamailio refreshes registrations towards asterisk automically to ensure continuous availability for mobile users. The crash exists 3-5 secs after this refresh process, but not always. Sometimes this process runs fine only CRITICAL logs appears (mentioned below) after it, but sometimes kamailio crashes during writing these CRITICAL logs. Peter From: Dr. Barabás Péter via sr-users <sr-users(a)lists.kamailio.org> Date: Wednesday, 2023. November 15. 17:03 To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org> Cc: Dr. Barabás Péter <dr.peter.barabas(a)gmail.com> Subject: [SR-Users] Re: uac_req_send + evroute + crash Hello Daniel, I’m using kamailio 5.7.2 currently and this misterious crash occurs again. Now core files are generated also, here is the trace: (gdb) bt #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 #1 0x00007fae9a2d0859 in __GI_abort () at abort.c:79 #2 0x00005614ad79afd8 in qm_debug_check_frag (qm=0x7fae78e77000, f=0x7fae79805028, file=0x7fae77c8c134 "uac: uac_send.c", line=860, efile=0x5614ad936f99 "core/mem/q_malloc.c", eline=511) at core/mem/q_malloc.c:129 #3 0x00005614ad79f7c1 in qm_free (qmp=0x7fae78e77000, p=0x7fae79805060, file=0x7fae77c8c134 "uac: uac_send.c", func=0x7fae77c8cf10 <__func__.15157> "uac_send_tm_callback", line=860, mname=0x7fae77c8c014 "uac") at core/mem/q_malloc.c:511 #4 0x00005614ad7ab410 in qm_shm_free (qmp=0x7fae78e77000, p=0x7fae79805060, file=0x7fae77c8c134 "uac: uac_send.c", func=0x7fae77c8cf10 <__func__.15157> "uac_send_tm_callback", line=860, mname=0x7fae77c8c014 "uac") at core/mem/q_malloc.c:1350 #5 0x00007fae77c3686b in uac_send_tm_callback (t=0x7fae797dcf40, type=131072, ps=0x7fff8bd990d0) at uac_send.c:860 #6 0x00007fae783abc27 in run_trans_callbacks_internal (cb_lst=0x7fae797dcfe8, type=131072, trans=0x7fae797dcf40, params=0x7fff8bd990d0) at t_hooks.c:241 #7 0x00007fae783abd1e in run_trans_callbacks (type=131072, trans=0x7fae797dcf40, req=0x0, rpl=0x0, code=0) at t_hooks.c:261 #8 0x00007fae782bd8cb in free_cell_helper (dead_cell=0x7fae797dcf40, silent=0, fname=0x7fae783e9f62 "timer.c", fline=653) at h_table.c:165 #9 0x00007fae7837649c in wait_handler (ti=724701450, wait_tl=0x7fae797dcff8, data=0x7fae797dcf40) at timer.c:653 #10 0x00005614ad50be68 in timer_list_expire (t=724701450, h=0x7fae78ef5d18, slow_l=0x7fae78ef95e0, slow_mark=33641) at core/timer.c:857 #11 0x00005614ad50c3a7 in timer_handler () at core/timer.c:922 #12 0x00005614ad50c8d5 in timer_main () at core/timer.c:961 #13 0x00005614ad45fbf3 in main_loop () at main.c:1833 #14 0x00005614ad46ae93 in main (argc=14, argv=0x7fff8bd99b48) at main.c:3086 I think it occurs only if $uac_req(evroute) is set to 1 and I define the event_route[uac:reply] route. My uac_reply route is easy: if ($uac_req(evcode)==200) { xlog("L_INFO", "Registration for user $fU has been refreshed successfully."); $sht(vtp=>asterisk_restarted) = $null; route(SAVE_REG); } else { xlog("L_INFO", "Registration failed: $uac_req(evcode)"); } the SAVE_REG route is the following: route[SAVE_REG] { xlog("L_INFO", "Saving pbx registration...:$fU"); $var(maxExpiry) = MAX_PBX_REG_EXPIRY; route(GET_CLIENT_ID); sql_pvquery("ca", "select count(*) from pbxusers where user = '$fU'", "$var(pbxusersCnt)"); if ($var(pbxusersCnt)>0) { if ($var(clientId) == 0) { sql_query("ca", "update pbxusers set expiry = TIMESTAMPADD(SECOND, $var(maxExpiry), SYSDATE()), online=1 where user = '$fU'"); } else { sql_query("ca", "update pbxusers set client_id = '$var(clientId)', expiry = TIMESTAMPADD(SECOND, $var(maxExpiry), SYSDATE()), online=1 where user = '$fU'"); } } else { sql_query("ca", "insert into pbxusers (user, expiry, client_id, online) values ('$fU', TIMESTAMPADD(SECOND, $var(maxExpiry), SYSDATE()), '$var(clientId)', 0)"); } } And GET_CLIENT_ID route is: route[GET_CLIENT_ID] { $var(clientId) = 0; if (is_present_hf("X-AT-ClientId")) { $var(clientId) = $hdr(X-AT-ClientId); } } Any idea, is it a bug or I do something wrong in config files? Peter From: Dr. Barabás Péter via sr-users <sr-users(a)lists.kamailio.org> Date: Sunday, 2023. October 8. 18:49 To: miconda(a)gmail.com <miconda(a)gmail.com>, Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org> Cc: Dr. Barabás Péter <dr.peter.barabas(a)gmail.com> Subject: [SR-Users] Re: uac_req_send + evroute + crash Hello Daniel, I do not see any “failed to send request with authentication”. The next CRITICAL log appears after calling uac_req_send(): CRITICAL: <core> [core/mem/q_malloc.c:519]: qm_free(): BUG: freeing already freed pointer (0x7f114995ada8), called from uac: uac_send.c: uac_send_tm_callback(860), first free uac: uac_send.c: uac_resend_tm_callback(732) - ignoring Now we use kamailio 5.7.2 and no crash has come, but the critical logs above exist. I saw a ticket in github: https://github.com/kamailio/kamailio/issues/3522, may the crash be similar or the same to that? I will make a try next week with downgrading to 5.6.2 and try to reproduce the crash. Peter From: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Friday, 2023. October 6. 13:55 To: Dr. Barabás Péter <dr.peter.barabas(a)gmail.com>, Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org> Subject: Re: [SR-Users] uac_req_send + evroute + crash Hello, do you also get error log messages that include "failed to send request with authentication"? Which CRITICAL log appears when you call uac_req_send()? You pasted a couple of them in the initial email? Cheers, Daniel On 05.10.23 17:32, Dr. Barabás Péter wrote: Hello, I used kamailio version 5.6.2. I refreshed to 5.7.2 today. As I remember it was in kamailio long time ago therefore I could skip evroute route. But this CRITICAL log appears always when I call uac_req_send(). I call it with settings: $uac_req(auser) = $var(username); $uac_req(apasswd) = $var(password); Where username and password are retrived from web service before call. In event_route I got first 401 after 200. Peter From: Daniel-Constantin Mierla <miconda(a)gmail.com><mailto:miconda@gmail.com> Date: Thursday, 2023. October 5. 17:25 To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org><mailto:sr-users@lists.kamailio.org> Cc: Dr. Barabás Péter <dr.peter.barabas(a)gmail.com><mailto:dr.peter.barabas@gmail.com> Subject: Re: [SR-Users] uac_req_send + evroute + crash Hello, On 05.10.23 16:34, Dr. Barabás Péter via sr-users wrote: Hi All, I use kamailio In front of Asterisk and kamailio needs to refresh registrations periodically towards Asterisk to ensure the availability of users from Asterisk side. I use uac module and call uac_req_send() for sending REGISTER requests. I set $uac_req(evroute)=1 The event_route[uac:reply] is called fine, but in kamailio logs I see the next lines: CRITICAL: <core> [core/mem/q_malloc.c:519]: qm_free(): BUG: freeing already freed pointer (0x7f114995ada8), called from uac: uac_send.c: uac_send_tm_callback(860), first free uac: uac_send.c: uac_resend_tm_callback(732) - ignoring After some time, kamailio has crashed. CRITICAL: <core> [core/mem/q_malloc.c:519]: qm_free(): BUG: freeing already freed pointer (0x7f114995ada8), called from uac: uac_send.c: uac_send_tm_callback(860), first free uac: uac_send.c: uac_resend_tm_callback(732) – ignoring CRITICAL: <core> [core/pass_fd.c:277]: receive_fd(): EOF on 34 ALERT: <core> [main.c:774]: handle_sigs(): child process 1407950 exited by a signal 6 what version of Kamailio are you using? Is Asterisk challenging for authentication? Does it happen every time or seldom? Cheers, Daniel -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy and Development Services Kamailio Advanced Training - Online - Nov 14-16, 2023 -- asipto.com -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy and Development Services Kamailio Advanced Training - Online - Nov 14-16, 2023 -- asipto.com

2 1

Crash of Kamailio when using module http_async_client - function http_async_query, if module "tm.so" is not loaded (Kamailio 5.7.3)
by Chaigneau, Nicolas 10 Jan '24

10 Jan '24

Hello, When using http_async_query function, provided by module http_async_client: https://www.kamailio.org/docs/modules/devel/modules/http_async_client.html#… If module "tm.so" is not loaded, then immediately upon calling function http_async_query, Kamailio crashes: 9(3807541) CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 8 0(3807527) ALERT: <core> [main.c:791]: handle_sigs(): child process 3807533 exited by a signal 11 0(3807527) ALERT: <core> [main.c:795]: handle_sigs(): core was generated 0(3807527) INFO: <core> [main.c:818]: handle_sigs(): terminating due to SIGCHLD Of course, I now know that I must load the module "tm.so". But I think it would be better to catch the issue when Kamailio starts, rather than crashing later on when trying to call http_async_query. What do you think ? Regards, Nicolas. This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.

3 3

How to use uac.reg_add command?
by mm e 05 Jan '24

05 Jan '24

./kamcmd uac.reg_add 789798 789798 mydomain.com 789798 myteldomain.com . 789798 123456 . sip:sip6.telco.nl 360 0 10 mydomain.com:5060 udp:mydomain.com:5060 error: 400 - Invalid Parameters Can you provide me with a case, I don't know how to enter the correct format.

2 1

DB invalid connection parameter
by Sergiu Pojoga 04 Jan '24

04 Jan '24

Hi, Facing the following error after bumping Kam from 5.3 => 5.4 => 5.5 => 5.6, following instructions on each step about DB structure and module changes. These errors show up since. Any clue what they mean? A couple other modules are using the same DB MySQL connector. The data in the DB also seems to get updated properly. Jan 03 15:08:30 sip kamailio[20881]: ERROR: <core> [db.c:489]: db_use_table(): invalid connection parameter *Jan 03 15:08:30 sip kamailio[20881]: ERROR: usrloc [ucontact.c:1170]: db_update_ucontact_ruid(): sql use_table failedJan 03 15:08:30 sip kamailio[20881]: ERROR: usrloc [urecord.c:438]: wb_timer(): updating contact in db failed (aor: user(a)domain.com <user(a)domain.com>)* version: kamailio 5.6.5 (x86_64/linux) 48d48f compiled on 02:32:48 Jan 2 2024 with gcc 4.9.2 DB structure: location | CREATE TABLE `location` ( `id` int(10) unsigned NOT NULL AUTO_INCREMENT, `ruid` varchar(64) NOT NULL DEFAULT '', `username` varchar(64) NOT NULL DEFAULT '', `domain` varchar(64) DEFAULT NULL, `contact` varchar(512) NOT NULL DEFAULT '', `received` varchar(128) DEFAULT NULL, `path` varchar(512) DEFAULT NULL, `expires` datetime NOT NULL DEFAULT '2030-05-28 21:32:15', `q` float(10,2) NOT NULL DEFAULT 1.00, `callid` varchar(255) NOT NULL DEFAULT 'Default-Call-ID', `cseq` int(11) NOT NULL DEFAULT 1, `last_modified` datetime NOT NULL DEFAULT '2000-01-01 00:00:01', `flags` int(11) NOT NULL DEFAULT 0, `cflags` int(11) NOT NULL DEFAULT 0, `user_agent` varchar(255) NOT NULL DEFAULT '', `socket` varchar(64) DEFAULT NULL, `methods` int(11) DEFAULT NULL, `instance` varchar(255) DEFAULT NULL, `reg_id` int(11) NOT NULL DEFAULT 0, `server_id` int(11) NOT NULL DEFAULT 0, `connection_id` int(11) NOT NULL DEFAULT 0, `keepalive` int(11) NOT NULL DEFAULT 0, `partition` int(11) NOT NULL DEFAULT 0, PRIMARY KEY (`id`), UNIQUE KEY `ruid_idx` (`ruid`), KEY `account_contact_idx` (`username`,`domain`,`contact`), KEY `expires_idx` (`expires`), KEY `connection_idx` (`server_id`,`connection_id`), *KEY `tcpcon_idx` (`connection_id`)* ) ENGINE=InnoDB AUTO_INCREMENT=287989 DEFAULT CHARSET=latin1 > select * from version where table_name='location'; table_name: location table_version: 9 Thanks.

2 2

webRTC Test Client?
by Andy Newlands 03 Jan '24

03 Jan '24

Hi, I have a Freeswitch installation, fronted by a Kamailio proxy I would like to configure Kamailio to bridge SIP between webRTC clients and Freeswitch. The first issue I hit is how to set up a test webRTC client to make calls into Kamailio/FS. Can anyone point me to a simple webRTC client I can use to make test webRTC/SIP calls into my setup? Thanks BTW: I'm not JS experienced (I work with Python, C#, C/C++). Kind regards, Andy

6 5

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users