- sr-users - kamailio.org

5.8 compiler warning
by Juha Heinanen 10 Mar '24

10 Mar '24

Kamailio 5.8 build generates on my Debian 12 the following warning: core/mem/q_malloc.c:996:14: warning: 'qm_strnstr' defined but not used [-Wunused-function] 996 | static void *qm_strnstr(const void *b1, int l1, const void *b2, int l2) | ^~~~~~~~~~ Perhaps the definition of the function should be #ifdef'ed by DBG_QM_MALLOC. -- Juha

1 0

SSL key logger for Diffie-Hellman cipher
by Calvin E. 08 Mar '24

08 Mar '24

I've been tasked to use LD_PRELOAD to log SSL keys for TLS connections using a Diffie-Hellman cipher. The first attempt did not work, so I wanted to sanity check whether Kamailio's TLS support is built in such a way that would defeat LD_PRELOAD. The instructions from the vendor are to update /etc/init.d/kamailio like this: env SSLKEYLOG_UDP='127.0.0.1:1234' LD_PRELOAD="/usr/local/src/voipmonitor-git/tools/ssl_keylogger/sslkeylog.so /usr/lib/x86_64-linux-gnu/libssl.so.3" \ start-stop-daemon --start --quiet --pidfile $PIDFILE \ --exec $DAEMON -- $OPTIONS || log_failure_msg " already running" Is there anything special in Kamailio (5.7.3 on Debian 12) that would prevent this from working? Not necessarily something to defeat a keylogger, but maybe the way tls.so gets loaded? The only discrepancy I've noticed is the vendor docs refer to libssl.so.3 not libssl.so.1, but the vendor said that should be OK. I'd love to hear from someone already using VoIPmonitor with Diffie-Hellman ciphers and Kamailio.

6 16

from TCP to UDP and Kamailio doing it wrong
by Alberto Diez 08 Mar '24

08 Mar '24

Hi kamailio community, I have an issue with a Kamailio 5.7. It's listening both in TCP and UDP. In my scenario requests arrive from devices on TCP, but I want to forward to the next hops on UDP. I am avoiding using any type of DNS resolution; since I am always forwarding to predefined next hops I am using the dispatcher module (defined with the IP addresses and transport=udp) or I wrote config files using t_relay_to_udp or t_relay_to with a udp: followed by IP address. I never set up FQDNS only IP addresses and in all of them I explicitly mention UDP. In all of these scenarios I have tried Kamailio insists in trying to use TCP with the next hop and failing because the next_hop is only UDP. I guess because the message arrived using TCP Kamilio does that but I find the behavior very confusing. I nailed down that in my situation its the tm module function prepare_new_uac (in file src/modules/tm/t_fwd.c line 119) being the one that missbehaves. The documentation of the function says literraly : "* t->uac[branch].request.dst will be filled if next_hop !=0 with the result * of the DNS resolution (next_hop, fproto and fsocket). * If next_hop is 0 all the dst members except the send_flags are read-only * (send_flags it's updated) and are supposed to be pre-filled." I found out that even when next_hop is 0 the function changes the t->uac[branch].request.dst proto, socket etc. its there that the kamailio takes the wrong decision, until that function is called within add_auc, the destination proto or the fproto etc is always 1 (UDP) which is what I am trying to force from the config file or the dispatcher definition (I tried both ways). But after calling that function then it comes as a 2 (TCP) The problematic function is a monster of 500 lines and I would like to avoid having to understand it. Since I think the scenario is not so unusual I just want to ask if maybe I am missing something that I should do to avoid the Kamailio to select TCP and in order to have the tm module respecting my preference for UDP (either with dispatcher module and the transport param or with t_relay_to or t_relay_to_udp I don't care the way). Any hints are welcome. Best regards alberto

5 9

direct media between UACs
by Sergio Charrua 08 Mar '24

08 Mar '24

Hi all! got a weird behavior that I cannot understand the reason for... In our LAB environment, we have 2 Asterisk instances (version 13.38.3 and chan_sip) and 1 Kamailio 5.7 in between. All servers are in the same network, so, there is no NAT involved. No RTPEngine either. Network is 10.20.0.0/24 and Asterisk #1 has IP .1 Asterisk #2 has IP .3 and Kamailio has IP .5 The Asterisk servers are used only for testing, nothing serious. However, Kamailio is setup to use RTJson requesting routes to a Routing Server on the same network. And it works fine. Both Asterisk servers have the same dialplan, which only Answers the call and plays MOH on both ends so that RTP audio streams both ways. When making a call on Asterisk Server #1 via command line to go directly to Asterisk Server #2 without using Kamailio (CLI> channel originate SIP/123(a)10.20.0.3 application MusicOnHold() ) the Asterisk #2 receives the call, answers and plays MOH too and I can see RTP streams coming from both ends correctly. However, if I use Kamailio to proxy the call generated from Asterisk #1 to Asterisk #2, using similar command line instruction (CLI> channel originate SIP/123(a)10.20.0.5 application MusicOnHold() ), the call is indeed received on Kamailio who then sends it to Asterisk #2, who answers the call and plays MOH, *but* despite the audio stream being sent to Asterisk #1 it is never received, however audio from Asterisk #1 is received by Asterisk #2, which configures a typical One Way Audio issue due to NAT. This is where it gets strange, because there is no NAT, SDP on INVITE and SIP 200 messages seem OK, as far as I understand it. Also, Asterisk servers have SIP configuration with directmedia enabled and NAT disabled to make sure that media is direct. But I have also tried with directmedia disabled and NAT enabled and get identical results. I am most probably missing some tiny detail, but I have no clue.... and I bet it is simple and stupid.... Could another pair of eyes help me with this? What is wrong? Do I really need RTPEngine even when the network has no NAT? I am sure it would work that way, but it doesn't make sense... Here are some screenshots: Call Scenario #1 - direct call from Asterisk #1 to Asterisk #2 without Kamailio in between: Invite from Asterisk #1 to Asterisk #2 with direct media between both ends: https://drive.google.com/file/d/1eLjT3nr_Rc-UBaf4QhIgZ95bjETOVvxo/view?usp=… Replies from Asterisk #2 to Asterisk #1 with direct media between both ends: https://drive.google.com/file/d/11lLcB-V8rWGSrVqWiit-q9WX2FfqB6BZ/view?usp=… Call Scenario #2 - call from Asterisk #1 using Kamailio to relay call to Asterisk #2, with one way audio Invite from Asterisk #1 to Asterisk #2 via Kamailio with SDP details: https://drive.google.com/file/d/1Cp9xrGcwNmQ9Ks36N_oD1Dj7lxfu-tbH/view?usp=… Invite from Kamailio relayed to Asterisk #2 with SDP details from Asterisk #1 identical to above: https://drive.google.com/file/d/1mi3FCNjM3luXfENEp-0088XLgcyfXRK6/view?usp=… Reply from Asterisk #2 to Kamailio with SDP details: https://drive.google.com/file/d/1TpMGe2tvpX_5SIpSbm2b3Zro9EuYwcO-/view?usp=… Reply from Kamailio to Asterisk #2 with SDP details from Asterisk #2 identical to above: https://drive.google.com/file/d/12jq5APfFwVVPc0vJ3RkcXyN1hBE51fnQ/view?usp=… As we can see, SDP details seem OK, but if I check call flow on Asterisk #1, I can only find 1 RTP channel with audio coming from Asterisk #2 https://drive.google.com/file/d/1iEfvkylZVbthHM5kxkurWh-GAYCYLytl/view?usp=… and the same on Asterisk #2 : https://drive.google.com/file/d/12rvf9Lrwp-MNZvGCwlXEEBsBRmfcinph/view?usp=… My Kamailio.cfg is as follows: #!KAMAILIO # # config file for SIPProxy # - load balancing of VoIP calls # - no TPC listening # # Kamailio (OpenSER) SIP Server v3.2 # - web: http://www.kamailio.org # - git: http://sip-router.org # # # Refer to the Core CookBook at http://www.kamailio.org/dokuwiki/doku.php # for an explanation of possible statements, functions and parameters. # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG # #!define WITH_DEBUG ###!define WITH_NAT #!define WITH_PSTN /* enables Accounting Log functions */ #!define FLT_ACC 1 /* enable Accounting of missed or failed calls */ #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 /* defines DB connection string */ #!ifndef DBURL #!define DBURL "mysql://kamailio:kamailio@10.20.0.1:3306/kamailio" #!endif # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 ####### Global Parameters ######### #!ifdef WITH_DEBUG debug=4 log_stderror=no #!else debug=2 log_stderror=no #!endif #!define FLT_DISPATCH_SETID 1 #!define FLT_FS 10 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 #!define FLT_SRC_ALLOWED 8 #!define FLT_DST_INTERNAL_IP 9 #!define FLT_SRC_INTERNAL_IP 10 #!substdef "!INTERNAL_IP_NET!10.20.0.0/24!g" #!substdef "!INTERNAL_IP_ADDR!10.20.0.2!g" #!substdef "!EXTERNAL_IP_ADDR!10.20.0.2!g" #!ifndef HTTP_ASYNC_CLIENT_WORKERS #!define HTTP_ASYNC_CLIENT_WORKERS 8 #!endif /* add API http timeout */ #!define HTTP_API_TIMEOUT 5000 #!define HTTP_API_ROUTING_ENDPOINT "http://10.246.212.40:7778/get_route" /* DMQ SIP message sharing */ #!define DMQ_PORT 5062 #!define DMQ_LISTEN "sip:10.20.0.2:5062" #!define DMQ_SERVER_ADDRESS "sip:10.20.0.2:5062" #!define DMQ_NOTIFICATION_ADDRESS "sip:10.20.0.4:5062" memdbg=5 memlog=5 log_facility=LOG_LOCAL0 log_prefix="{$mt $hdr(CSeq) $ci} " fork=yes children=8 /* comment the next line to enable TCP - all trunks are UDP only */ disable_tcp=yes /* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */ auto_aliases=no port=5060 /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ listen=udp:10.20.0.5:5060 advertise 10.20.0.5:5060 listen=tcp:10.20.0.5:5060 advertise 10.20.0.5:5060 listen=udp:10.20.0.2:5062 advertised_address="10.20.0.5"; sip_warning=no; use_dns_failover = on; ####### Modules Section ######## #set module path mpath="/usr/local/lib64/kamailio/modules/" loadmodule "db_mysql.so" loadmodule "jsonrpcs.so" loadmodule "kex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "acc.so" loadmodule "usrloc.so" loadmodule "nathelper.so" #loadmodule "rtimer.so" #loadmodule "sqlops.so" # --- CPS Limiter # --- end of CPS Limiter loadmodule "ipops.so" loadmodule "textopsx.so" loadmodule "sdpops.so" loadmodule "http_async_client.so" loadmodule "rtjson.so" loadmodule "jansson.so" loadmodule "dmq.so" loadmodule "dmq_usrloc.so" loadmodule "htable.so" loadmodule "dialog.so" #!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif #!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "log_level_name", "exec") #!endif # ----------------- setting module-specific parameters --------------- # ----- jsonrpcs params ----- modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamailio_rpc.fifo") modparam("jsonrpcs", "pretty_format", 1) # ----- rr params ----- modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamailio_rpc.fifo") modparam("jsonrpcs", "pretty_format", 1) # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- acc params ----- modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_extra","src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd;src_ip=$si") # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default we do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra","src_user=$fU;src_domain=$fd;src_ip=$si;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra","src_user=$fU;src_domain=$fd;src_ip=$si;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") //;calltype=$avp(calltype)") # ----- tm params ----- # ----- the TM module enables stateful processing of SIP requests modparam("tm", "fr_timer", 5000) modparam("tm", "fr_inv_timer", 60000) modparam("tm", "remap_503_500", 0) # ----- usrloc params ----- /* enable DB persistency for location entries */ modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", MULTIDOMAIN) # params needed for NAT traversal in other modules modparam("usrloc", "nat_bflag", FLB_NATB) # ----- nathelper params ----- modparam("nathelper", "received_avp", "$avp(s:rcv)") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:ping@kamailio.org") #modparam("rtimer", "timer", "name=cdr;interval=300;mode=1;") #modparam("rtimer", "exec", "timer=cdr;route=CDRS") #modparam("sqlops", "sqlcon", "ca=>mysql://kamailio:kamailiorw@10.19.139.113:3306/kamailio") #modparam("dmq", "server_socket", DMQ_SERVER_SOCKET ) modparam("dmq", "server_address", DMQ_SERVER_ADDRESS ) modparam("dmq", "notification_address", DMQ_NOTIFICATION_ADDRESS ) modparam("dmq", "multi_notify", 1) modparam("dmq", "num_workers", 4) modparam("dmq", "ping_interval", 60) modparam("dmq_usrloc", "enable", 1) # -- CPS Limiter modparam("htable", "htable", "rhs=>size=32;initval=0;autoexpire=10;") modparam("htable", "htable", "rhm=>size=32;initval=0;autoexpire=120;") modparam("htable", "enable_dmq", 1) modparam("htable", "dmq_init_sync", 1) modparam("dialog", "profiles_with_value", "concurrent_calls") modparam("dialog", "enable_dmq", 1) # ----- http_async_client params ----- modparam("http_async_client", "workers", HTTP_ASYNC_CLIENT_WORKERS) modparam("http_async_client", "connection_timeout", 2000) ####### Routing Logic ######## # main request routing logic route { if (is_method("KDMQ") && $Rp == 5062) { dmq_handle_message(); } xlog("L_INFO"," ********** Route START ***********"); # log the basic info regarding this call xlog("L_INFO","start|\n"); xlog("L_INFO","===================================================\n"); xlog("L_INFO","New SIP message $rm with call-ID $ci \n"); xlog("L_INFO","---------------------------------------------------\n"); xlog("L_INFO"," received $pr request $rm $ou\n"); xlog("L_INFO"," source $si:$sp\n"); xlog("L_INFO"," from $fu\n"); xlog("L_INFO"," to $tu\n"); xlog("L_INFO","---------------------------------------------------\n"); xlog("L_INFO","---------------------------------------------------\n"); # OPTIONS requests without a username in the Request-URI but one # of our domains or IPs are addressed to the proxy itself and # can be answered statelessly. if (is_method("OPTIONS")) { sl_send_reply("200","OK"); exit; } if ($fU=="ping") { sl_send_reply("200","OK"); exit; } # extract original source ip / port from X-forwarded-For header route(HANDLE_X_FORWARDED_FOR); # per request initial checks route(REQINIT); # NAT detection route(NATDETECT); # handle requests within SIP dialogs ### only initial requests (no To tag) # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()){ route(RELAY); } exit; } # handle retransmissions if (!is_method("ACK")) { if(t_precheck_trans()) { t_check_trans(); xlog("L_INFO", "ROUTE - Exiting after Retransmission check - method $rm"); exit; } t_check_trans(); } route(WITHINDLG); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers xlog("L_INFO", "ROUTE - Removing Headers"); remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")){ t_on_failure("MANAGE_FAILURE"); xlog("L_INFO", "ROUTE - Recording Route"); record_route(); if (is_method("INVITE") && is_request()) { if (has_body("application/sdp")) { xlog("L_INFO", "ROUTE - goiing to t_on_reply[ON_REPLY]\n"); t_on_reply("ON_REPLY"); } } } if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","ROUTE - Address Incomplete"); exit; } route(TOCARRIER); xlog("L_INFO", " ********** Route END *************"); } # extract original source ip / port from X-forwarded-For header route[HANDLE_X_FORWARDED_FOR] { if (is_present_hf("X-Forwarded-For")) { $var(source_ip) = $(hdr(X-Forwarded-For){s.select,0,:}); $var(source_port) = $(hdr(X-Forwarded-For){s.select,1,:}); } else { $var(source_ip) = $si; $var(source_port) = $sp; } $var(to_number) = $rU; } route[RELAY_API] { xlog("L_INFO","RELAY_API - from_ip $var(source_ip):$var(source_port) from_number $fU to_number $ru"); $http_req(all) = $null; $http_req(suspend) = 1; $http_req(timeout) = HTTP_API_TIMEOUT; $http_req(method) = "POST"; $http_req(hdr) = "Content-Type: application/json"; jansson_set("string","from_ip",$var(source_ip), "$var(http_routing_query)"); jansson_set("string","from_port",$var(source_port), "$var(http_routing_query)"); jansson_set("string","from_number",$fU, "$var(http_routing_query)"); jansson_set("string","to_number",$var(to_number) , "$var(http_routing_query)"); xlog("L_INFO","RELAY_API - API ASYNC ROUTING REQUEST: $var(http_routing_query)\n"); $http_req(body) = $var(http_routing_query); t_newtran(); http_async_query(HTTP_API_ROUTING_ENDPOINT, "RELAY_API_RESPONSE"); } # Relay request using the API (response) route[RELAY_API_RESPONSE] { if ($http_ok==1 && $http_rs==200) { xlog("L_INFO","RELAY_API_RESPONSE - RESPONSE: $http_rb\n"); if (jansson_get("rtjson", $http_rb, "$var(rtjson)")) { xlog("L_INFO","RELAY_API_RESPONSE - $var(rtjson)"); rtjson_init_routes("$var(rtjson)"); rtjson_push_routes(); # relay the message t_on_branch("MANAGE_BRANCH"); t_on_failure("MANAGE_FAILURE"); route(RELAY); return; } } send_reply(500, "API Not Available - http response = $http_rs $http_ok"); exit; } onreply_route[ON_REPLY] { xlog("L_INFO", "ON_REPLY - In onreply_route[ON_REPLY] $rs"); # on reply if (t_check_status("183|180|200")) { xlog("L_INFO", "ON_REPLY - Fixing Contacts"); # subst_hf("Contact","/@.*:/@EXTERNAL_IP_ADDR:/","a"); //subst_hf("Record-Route","/INTERNAL_IP_ADDR/EXTERNAL_IP_ADDR/","f"); } if (has_body("application/sdp")){ if (sdp_remove_line_by_prefix("a=maxptime")){ xlog("L_INFO", "ON_REPLY - remove maxptime "); msg_apply_changes(); } else{ xlog("L_INFO", "ON_REPLY - did not removed maxptime "); } } if (t_check_status("408")) { xlog("L_INFO", "ROUTE - Handling 408 Timeout\n"); } } route[TOCARRIER]{ #using rtjson, unsomment following line route(RELAY_API); } # Per SIP request initial checks route[REQINIT] { xlog("L_INFO", "REQINIT - Starting"); if (!mf_process_maxfwd_header("10")) { xlog("L_INFO", "REQINIT - 483 - Too Many Hops"); sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("L_INFO","REQINIT - Sanity Check -> Malformed SIP message from $si:$sp\n"); exit; } } # Caller NAT detection route[NATDETECT] { xlog("L_INFO", "NATDETECT - Entering"); #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (is_method("REGISTER")) { xlog("L_INFO", "NATDETECT - Fix Nated Register"); fix_nated_register(); } else { if(is_first_hop()){ xlog("L_INFO", "NATDETECT - Set Contact Alias"); set_contact_alias(); } } xlog("L_INFO", "NATDETECT - Set FLT_NATS" + FLT_NATS); setflag(FLT_NATS); } #!endif xlog("L_INFO", "NATDETECT - NAT Detect set FLT_NTS = " + FLT_NATS); return; } # Handle requests within SIP dialogs route[WITHINDLG] { xlog("L_INFO", "WITHINDLG - Entering"); if (!has_totag()) return; if (is_present_hf("Route") && $hdrc(Route)==1) { if (search_hf("Route", ".*EXTERNAL_IP_ADDR.*", "f")) { xlog("L_INFO", "WITHINDLG - Removing the route to self"); remove_hf("Route"); } } # sequential request within a dialog should # take the path determined by record-routing if (loose_route()) { route(DLGURI); if (is_method("BYE|CANCEL")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } else if ( is_method("ACK") ) { # ACK is forwarded statelessy xlog("L_INFO", "WITHINDLG - Going to NATMANAGE"); route(NATMANAGE); } else if ( is_method("NOTIFY") ) { #Add Record-Route for in-dialog NOTIFY as per RFC 6665. record_route(); } if(is_method("BYE")) xlog("L_INFO", "WITHINDLG - BYE message from $rU"); route(RELAY); exit; } if ( is_method("ACK|BYE|INVITE|UPDATE") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server route(RELAY); exit; } else { # ACK without matching transaction. Try to route anyway - being optimistic # since it has at least a To Tag route(RELAY); exit; } } sl_send_reply("404","Not here"); xlog("L_INFO", "WITHINDLG - Finishing WITHINDLG"); exit; } # URI update for dialog requests route[DLGURI] { xlog("L_INFO", "WITHINDLG - Entering DLGURI"); #!ifdef WITH_NAT if(!isdsturiset()) { xlog("L_INFO", "WITHINDLG - Handle ruri ALIAS"); handle_ruri_alias(); } #!endif return; } # Routing to foreign domains ---> NOT USED route[SIPOUT] { xlog("L_INFO", "WITHINDLG - Entering SIPOUT"); if (uri==myself){ xlog("L_INFO", "WITHINDLG - URI is MySelf!"); return; } append_hf("P-hint: outbound\r\n"); xlog("L_INFO", "WITHINDLG - Finishing SIPOUT"); route(RELAY); exit; } # Wrapper for relaying requests route[RELAY] { xlog("L_INFO", " ******** RELAY *******"); xlog("L_INFO", "RELAY - $si $su $ru"); # enable additional event routes for forwarded requests # - serial forking, RTP relaying handling, a.s.o. if (is_method("INVITE|BYE|CANCEL|SUBSCRIBE|UPDATE")) { if(!t_is_set("branch_route")) { xlog("L_INFO", "RELAY - branch_route NOT SET!"); t_on_branch("MANAGE_BRANCH"); } } xlog("L_INFO", "RELAY - checking method"); if (is_method("INVITE|SUBSCRIBE|UPDATE")) { xlog("L_INFO", "RELAY - is INVITE|SUBSCRIBE|UPDATE"); if(!t_is_set("onreply_route")) { xlog("L_INFO", "RELAY - onreply_route NOT SET!"); t_on_reply("ON_REPLY"); # MANAGE_REPLY"); } } if (is_method("INVITE")) { xlog("L_INFO", "RELAY - is INVITE"); t_on_failure("FAILED_RELAY"); if(!t_is_set("failure_route")) { xlog("L_INFO", "RELAY - failure_route NOT SET!"); t_on_failure("MANAGE_FAILURE"); } } if (!t_relay()) { xlog("L_INFO", "RELAY - t_relay returns FALSE"); route("MANAGE_FAILURE"); #sl_reply_error(); } xlog("L_INFO", "RELAY - exiting"); exit; } failure_route[FAILED_RELAY] { xlog("L_INFO", "FAILED_RELAY - Entering"); if (t_check_status("[4-5][0-9][0-9]")){ xlog("L_INFO", "FAILED_RELAY - Could not reach destination endpoint!"); if (rtjson_next_route()) { xlog("L_INFO", "MANAGE_FAILURE - Getting next route"); t_on_branch("MANAGE_BRANCH"); t_on_failure("MANAGE_FAILURE"); route(RELAY); } } } route[NATMANAGE] { xlog("L_INFO", "NATMANAGE - Entering"); #!ifdef WITH_NAT if (is_request()) { if(has_totag()) { xlog("L_INFO", "NATMANAGE - nat=yes --- Setting FLB_NATB"); setbflag(FLB_NATB); } } if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB) )) { xlog("L_INFO", "NATMANAGE - NO FLT_NATS/B Set!!! Getting out of NATMANAGE"); return; } if (is_request()) { xlog("L_INFO", "NATMANAGE - is_request - $rm from $si"); if (!has_totag()) { if(t_is_branch_route()) { xlog("L_INFO", "NATMANAGE - adding nat=yes"); add_rr_param(";nat=yes"); } } } if (is_reply()) { xlog("L_INFO", "NATMANAGE - is_reply - $rm from $si"); if(isbflagset(FLB_NATB)) { if(is_first_hop()) { xlog("L_INFO", "NATMANAGE - Set Contact Alias"); set_contact_alias(); } } } #!endif return; } # Manage failure routing cases route[MANAGE_FAILURE] { xlog("L_INFO", "MANAGE_FAILURE - Entering "); route(NATMANAGE); xlog("L_INFO", "MANAGE_FAILURE - t_is_canceled"); if (t_is_canceled()) exit; #!ifdef WITH_BLOCK3XX # block call redirect based on 3xx replies. if (t_check_status("3[0-9][0-9]")) { xlog("L_INFO", "MANAGE_FAILURE - SIP 3XX returned!!"); t_reply("404","Not found"); exit; } #!endif #!ifdef WITH_BLOCK401407 # block call redirect based on 401, 407 replies. if (t_check_status("401|407")) { xlog("L_INFO", "MANAGE_FAILURE - SIP 401|407 returned!!"); t_reply("404","Not found"); exit; } #!endif if (t_check_status("503")){ xlog("L_INFO", "MANAGE_FAILURE - SIP 503 returned : no destination available"); t_reply("503", "Destination not available"); exit; } if (rtjson_next_route()) { xlog("L_INFO", "MANAGE_FAILURE - Getting next route!!"); t_on_branch("MANAGE_BRANCH"); t_on_failure("MANAGE_FAILURE"); route(RELAY); exit; } } # Manage outgoing branches branch_route[MANAGE_BRANCH] { xlog("L_INFO","MANAGE_BRANCH - New branch [$T_branch_idx] to $ru\n"); xlog("L_INFO", "MANAGE_BRANCH - branch_route MANAGE_BRANCH 1 "); rtjson_update_branch(); route(NATMANAGE); } Any help would be greatly appreciated. Thanks in advance. Sérgio Charrua

2 3

Kamailio v5.8.0 Released - new major version is out
by Daniel-Constantin Mierla 07 Mar '24

07 Mar '24

Kamailio v5.8.0 is out – it comes with 4 new modules and a large set of improvements touching again more than 50 existing modules. You can read a bit more detailed release notes at: * https://www.kamailio.org/w/kamailio-v5-8-0-release-notes/ Many thanks to all developers and community members that made possible this release. v5.8.0 brings more flexibility and optimizations across many existing components and modules, new parameters, functions, variables and transformations. Enjoy Kamailio v5.8.0! Thank you for flying Kamailio! Daniel -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy, Training and Development Services -- asipto.com Kamailio World Conference, April 18-19, 2024, Berlin -- kamailioworld.com

1 0

Using uac_replace_to when forwarding call to another endpoint
by Marrold 07 Mar '24

07 Mar '24

Hi all, I am using uac_replace_to to replace the TO header on requests. I understand it can only be called once per message and the recommendation is to store the updated value in a pvar and apply it in the branch route. However in my scenario I wish to first try one endpoint and then if it gets a 4XX response forward it to another UAC, and update the TO accordingly. Currently trying to call uac_replace_to twice shows an error and corrupts the TO header. Is there a work around for this? Thanks again Matthew

3 3

Roadmap to next major Kamailio release series v5.8.x
by Daniel-Constantin Mierla 07 Mar '24

07 Mar '24

Hello, discussed a bit during the online Kamailio devel meeting, it is time to set the milestones towards the next major Kamailio release series v5.8.x. If no other suggestions that suit more developers, I would propose to freeze by end of this month or early February, then test for about 4 weeks as usual and release by end of February or during March. If anyone wants to add new features/modules, they have to be published till freezing date, either pushed in the git repository or proposed as pull request. Cheers, Daniel -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy, Training and Development Services -- asipto.com Kamailio Advanced Training, February 20-22, 2024 -- asipto.com Kamailio World Conference, April 18-19, 2024, Berlin -- kamailioworld.com

3 12

rtimer intermittent failures
by Marrold 06 Mar '24

06 Mar '24

Hi all, I am using Kamailio 5.7.4 on a Debian 12 machine, with a Python Kemi based config. I am seeing some intermittent failures when accessing an instance variable within a function called by rtimer. I'm using the rtimer module with the following parameters: modparam("rtimer", "timer", "name=hello;interval=5;mode=0;") modparam("rtimer", "exec", "timer=hello;route=ksr_route_hello") I initialise the kamailio class, and instance variable like this: class kamailio: def __init__(self): self.hello = "hi" Within the class I have the following route function: def ksr_route_hello(self, msg, evname): KSR.info("Running ksr_route_hello\n") KSR.info(f"Hello? {self.hello}\n") Then in the logs I see it sometimes works, and sometimes fails: 9(15) INFO: <core> [core/kemi.c:106]: sr_kemi_core_info(): Running ksr_route_hello 9(15) INFO: <core> [core/kemi.c:106]: sr_kemi_core_info(): Hello? hi 9(15) INFO: <core> [core/kemi.c:106]: sr_kemi_core_info(): Running ksr_route_hello 9(15) ERROR: app_python3 [python_support.c:167]: python_handle_exception(): apy_exec: ksr_route_hello(rtimer): Unhandled exception in the Python code: TypeError: 'NoneType' object cannot be interpreted as an integer The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/etc/kamailio/kamailio.py", line 1007, in ksr_route_hello KSR.info("Running ksr_route_hello\n") SystemError: <built-in function info> returned a result with an exception set Does anyone know where I'm going wrong? Thanks Matthew

2 2

Question for RFC junkies / kamailio modifying message bodies
by Valentin Christoph 06 Mar '24

06 Mar '24

Hi all, it might be a minor issue, or it might not be an issue at all, but I stumbled over following statements in RFC 3261: Chapter 16.6 Request Forwarding (of a proxy) 1. Copy request The proxy starts with a copy of the received request. The copy MUST initially contain all of the header fields from the received request. Fields not detailed in the processing described below MUST NOT be removed. The copy SHOULD maintain the ordering of the header fields as in the received request. The proxy MUST NOT reorder field values with a common field name (See Section 7.3.1<https://www.rfc-editor.org/rfc/rfc3261.html#section-7.3.1>). The proxy MUST NOT add to, modify, or remove the message body. An actual implementation need not perform a copy; the primary requirement is that the processing for each next hop begin with the same request. Chapter 16.7 Response Processing (at a proxy) 9. Forward response After performing the processing described in steps "Aggregate Authorization Header Field Values" through "Record-Route", the proxy MAY perform any feature specific manipulations on the selected response. The proxy MUST NOT add to, modify, or remove the message body. Unless otherwise specified, the proxy MUST NOT remove any header field values other than the Via header field value discussed in Section 16.7<https://www.rfc-editor.org/rfc/rfc3261.html#section-16.7> Item 3. In particular, the proxy MUST NOT remove any "received" parameter On the other hand, everywhere in the Internet (starting with stackoverflow), you can read it is OK, if a SIP proxy modifies a body, and also kamailio allows it. Might be a question for the coffee break. All the best Christoph

3 2

Kamailio closing tcp connection on downstream responses
by Kjartan S 06 Mar '24

06 Mar '24

Trying to setup Kamailio with MS Teams Direct Routing. I am familiar with the integration steps required by Microsoft (using contact header as FQDN, certified CA for certificate) aswell as the famous guide; https://skalatan.de/en/blog/kamailio-sbc-teams + https://learn.microsoft.com/en-us/microsoftteams/direct-routing-protocols-s… Sending any SIP requests (Invite, ACK, BYE) toward MS is working fine (with provisional response received in Kamailio) - so there is obviously a working connection between Kamailio <-> MS Direct Routing environment. HOWEVER, once Kamailio is forwarding SIP responses to MS (provisional responses/200 OK received from UAS), then Kamailio is closing the TCP connection. Please see attached logs below. Any idea why Kamailio is closing the connection when trying to send provisional responses to MS? - Using t_realy on original invite from MS - tcp_reuse_port=yes, tcp_rd_buf_size = 16384, tcp_connection_lifetime=3605, children=8, socket_workers=4 - No override rules in firewall - OS; debian:11.7 - Notice that TLS connection is made on port :26627 - however, MS sends port :5061 in VIA header (on first Invite). This seems to me to be a conflict in ports. https://www.kamailio.org/wiki/cookbooks/5.4.x/core#reply_route "There is no network route that can be enforced for a SIP reply - it is sent based on Via header, according to SIP RFC3261" ----- Handshake complete for 52.114.76.76:26627 19(43) DEBUG: tls [tls_domain.c:818]: sr_ssl_ctx_info_callback(): SSL handshake done 19(43) DEBUG: tls [tls_server.c:473]: tls_accept(): TLS accept successful 19(43) DEBUG: tls [tls_server.c:476]: tls_accept(): tls_accept: new connection from 52.114.76.76:26627 using TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384 256 19(43) DEBUG: tls [tls_server.c:480]: tls_accept(): tls_accept: local socket: 10.129.0.91:5061 19(43) DEBUG: tls [tls_server.c:420]: tls_dump_cert_info(): tls_accept: client certificate subject:/C=US/ST=WA/L=Redmond/O=Microsoft Corporation/CN=sip.pstnhub.microsoft.com 19(43) DEBUG: tls [tls_server.c:424]: tls_dump_cert_info(): tls_accept: client certificate issuer:/C=US/O=Microsoft Corporation/CN=Microsoft Azure RSA TLS Issuing CA 04 ----- Kamailio trying to forward SIP response "183" to MS (response received from UAS). Kamailio finds active connection by ID 13 / 0x7f4ecad0be08 20(44) DEBUG: {2 1 INVITE e926eb82d1a25bdc9ba03048cdbc5c77} <core> [core/tcp_main.c:1722]: _tcpconn_find(): found connection by id: 13 20(44) DEBUG: {2 1 INVITE e926eb82d1a25bdc9ba03048cdbc5c77} <core> [core/tcp_main.c:2627]: tcpconn_send_put(): tcp connection found (0x7f4ecad0be08), acquiring fd 20(44) DEBUG: {2 1 INVITE e926eb82d1a25bdc9ba03048cdbc5c77} <core> [core/tcp_main.c:2637]: tcpconn_send_put(): c=0x7f4ecad0be08, n=16 23(47) DEBUG: <core> [core/tcp_main.c:3982]: handle_ser_child(): read response= 7f4ecad0be08, 2, fd -1 from 20 (44) 20(44) DEBUG: {2 1 INVITE e926eb82d1a25bdc9ba03048cdbc5c77} <core> [core/tcp_main.c:2665]: tcpconn_send_put(): after receive_fd: c= 0x7f4ecad0be08 n=8 fd=12 20(44) DEBUG: {2 1 INVITE e926eb82d1a25bdc9ba03048cdbc5c77} <core> [core/tcp_main.c:2842]: tcpconn_do_send(): sending... 20(44) DEBUG: {2 1 INVITE e926eb82d1a25bdc9ba03048cdbc5c77} <core> [core/tcp_main.c:2878]: tcpconn_do_send(): after real write: c= 0x7f4ecad0be08 n=1191 fd=12 ----- Kamailio immediately closes the connection due to EOF. 19(43) DEBUG: <core> [core/tcp_read.c:280]: tcp_read_data(): EOF on connection 0x7f4ecad0be08 (state: 0, flags: 4018) - FD 10, bytes 0, rd-flags 10000 ([52.114.76.76]:26627 -> [52.114.76.76]:5061)19(43) DEBUG: <core> [core/tcp_read.c:1544]: tcp_read_req(): EOF 19(43) DEBUG: <core> [core/io_wait.h:597]: io_watch_del(): DBG: io_watch_del (0x555b3cf20260, 10, -1, 0x10) fd_no=2 called 19(43) DEBUG: <core> [core/tcp_read.c:1927]: handle_io(): removing from list 0x7f4ecad0be08 id 13 fd 10, state 2, flags 4018, main fd 57, refcnt 2 ([52.114.76.76]:26627 -> [52.114.76.76]:5061) 19(43) DEBUG: <core> [core/tcp_read.c:1702]: release_tcpconn(): releasing con 0x7f4ecad0be08, state -1, fd=10, id=13 ([52.114.76.76]:26627 -> [52.114.76.76]:5061)

1 0

RADIUS ACC - Interim Updates
by duarterocha91＠gmail.com 06 Mar '24

06 Mar '24

Hello all, I can't seem to find a way to make interim accounting requests for RADIUS. Can you help me with this? I can't find any native way for doing this. I've thought of getting a custom timer for each dialog and run a event route similar do dialog:start or dialog:end. Is that possible? Cheers, Duarte Rocha

2 2

Add XML to INVITE
by David Villasmil 05 Mar '24

05 Mar '24

Hello guys, I'm trying to add an xml with a boundary to an outgoing INVITE. But if i do: set_body_multipart("$rb", "application/sdp", "delimiter"); msg_apply_changes(); append_body_part("$var(something)", "application/pidf+xml"); msg_apply_changes(); but kamailio adds the SDP, but NOT the second $var(something). If i switch them and add firs the var, and then the SDP. kamailio adds the contents of $var(something) but NOT the SDP.... point is it doesn't add the second append Thanks!!! Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

2 3

dispatcher - sip options per gw
by marek 05 Mar '24

05 Mar '24

hi, i have kamailio gw (5.6.x) for voxbone. dispatcher module voxbone has separated inbound/outboud and prohibit sip options to "inbound" IP #traffic from voxbone 20 sip:81.201.82.45:5060;transport=udp 1 0 duid=abc;socket=udp:x.x.x.x:5060 #traffic TO voxbone 30 sip:81.201.89.110:5060;transport=udp 0 0 duid=abc;socket=udp:x.x.x.x:5060 is it possible send sip options per GW with dispatcher module? i tried flag "1 (bit at index 0 - 1 <<0) - inactive destination" https://www.kamailio.org/docs/modules/devel/modules/dispatcher.html#idm1059 Marek

2 2

direct media between UACs
by Sergio Charrua 05 Mar '24

05 Mar '24

Hi all! got a weird behavior that I cannot understand the reason for... In our LAB environment, we have 2 Asterisk instances (version 13.38.3 and chan_sip) and 1 Kamailio 5.7 in between. All servers are in the same network, so, there is no NAT involved. No RTPEngine neither. Network is 10.20.0.0/24 and Asterisk #1 has IP .1 Asterisk #2 has IP .3 and Kamailio has IP .5 The Asterisk servers are used only for testing, nothing serious. However, Kamailio is setup to use RTJson requesting routes to a Routing Server on the same network. And it works fine. Both Asterisk servers have the same dialplan, which only Answers the call and plays MOH on both ends so that RTP audio streams both ways. When making a call on Asterisk Server #1 via command line to go directly to Asterisk Server #2 without using Kamailio (CLI> channel originate SIP/ 123(a)10.20.0.*3* application MusicOnHold() ) the Asterisk #2 receives the call, answers and plays MOH too and I can see RTP streams coming from both ends correctly. However, if I use Kamailio to proxy the call generated from Asterisk #1 to Asterisk #2, using similar command line instruction (CLI> channel originate SIP/123(a)10.20.0.5 application MusicOnHold() ), the call is indeed received on Kamailio who then sends it to Asterisk #2, who answers the call and plays MOH, *but* despite the audio stream being sent to Asterisk #1 it is never received, however audio from Asterisk #1 is received by Asterisk #2, which configures a typical One Way Audio issue due to NAT. This is where it gets strange, because there is no NAT, SDP on INVITE and SIP 200 messages seem OK, as far as I understand it. Also, Asterisk servers have SIP configuration with directmedia enabled and NAT disabled to make sure that media is direct. But I have also tried with directmedia disabled and NAT enabled and get identical results. I am most probably missing some tiny detail, but I have no clue.... and I bet it is simple and stupid.... Could another pair of eyes help me with this? What is wrong? Do I really need RTPEngine even when the network has no NAT? I am sure it would work that way, but it doesn't make sense... Here are some screenshots: Call Scenario #1 - direct call from Asterisk #1 to Asterisk #2 without Kamailio in between: Invite from Asterisk #1 to Asterisk #2 with direct media between both ends: [image: image.png] Replies from Asterisk #2 to Asterisk #1 with direct media between both ends: [image: image.png] Call Scenario #2 - call from Asterisk #1 using Kamailio to relay call to Asterisk #2, with one way audio Invite from Asterisk #1 to Asterisk #2 via Kamailio with SDP details: [image: image.png] Invite from Kamailio relayed to Asterisk #2 with SDP details from Asterisk #1 identical to above: [image: image.png] Reply from Asterisk #2 to Kamailio with SDP details: [image: image.png] Reply from Kamailio to Asterisk #2 with SDP details from Asterisk #2 identical to above: [image: image.png] As we can see, SDP details seem OK, but if I check call flow on Asterisk #1, I can only find 1 RTP channel with audio coming from Asterisk #2 [image: image.png] and the same on Asterisk #2 : [image: image.png] My Kamailio.cfg : #!KAMAILIO # # config file for SIPProxy # - load balancing of VoIP calls # - no TPC listening # # Kamailio (OpenSER) SIP Server v3.2 # - web: http://www.kamailio.org # - git: http://sip-router.org # # # Refer to the Core CookBook at http://www.kamailio.org/dokuwiki/doku.php # for an explanation of possible statements, functions and parameters. # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG # #!define WITH_DEBUG ###!define WITH_NAT #!define WITH_PSTN /* enables Accounting Log functions */ #!define FLT_ACC 1 /* enable Accounting of missed or failed calls */ #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 /* defines DB connection string */ #!ifndef DBURL #!define DBURL "mysql://kamailio:kamailio@10.20.0.1:3306/kamailio" #!endif # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 ####### Global Parameters ######### #!ifdef WITH_DEBUG debug=4 log_stderror=no #!else debug=2 log_stderror=no #!endif #!define FLT_DISPATCH_SETID 1 #!define FLT_FS 10 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 #!define FLT_SRC_ALLOWED 8 #!define FLT_DST_INTERNAL_IP 9 #!define FLT_SRC_INTERNAL_IP 10 #!substdef "!INTERNAL_IP_NET!10.20.0.0/24!g" #!substdef "!INTERNAL_IP_ADDR!10.20.0.2!g" #!substdef "!EXTERNAL_IP_ADDR!10.20.0.2!g" #!ifndef HTTP_ASYNC_CLIENT_WORKERS #!define HTTP_ASYNC_CLIENT_WORKERS 8 #!endif /* add API http timeout */ #!define HTTP_API_TIMEOUT 5000 #!define HTTP_API_ROUTING_ENDPOINT "http://10.246.212.40:7778/get_route" /* DMQ SIP message sharing */ #!define DMQ_PORT 5062 #!define DMQ_LISTEN "sip:10.20.0.2:5062" #!define DMQ_SERVER_ADDRESS "sip:10.20.0.2:5062" #!define DMQ_NOTIFICATION_ADDRESS "sip:10.20.0.4:5062" memdbg=5 memlog=5 log_facility=LOG_LOCAL0 log_prefix="{$mt $hdr(CSeq) $ci} " fork=yes children=8 /* comment the next line to enable TCP - all trunks are UDP only */ disable_tcp=yes /* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */ auto_aliases=no port=5060 /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ listen=udp:10.20.0.5:5060 advertise 10.20.0.5:5060 listen=tcp:10.20.0.5:5060 advertise 10.20.0.5:5060 listen=udp:10.20.0.2:5062 advertised_address="10.20.0.5"; sip_warning=no; use_dns_failover = on; ####### Modules Section ######## #set module path mpath="/usr/local/lib64/kamailio/modules/" loadmodule "db_mysql.so" loadmodule "jsonrpcs.so" loadmodule "kex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "acc.so" loadmodule "usrloc.so" loadmodule "nathelper.so" #loadmodule "rtimer.so" #loadmodule "sqlops.so" # --- CPS Limiter # --- end of CPS Limiter loadmodule "ipops.so" loadmodule "textopsx.so" loadmodule "sdpops.so" loadmodule "http_async_client.so" loadmodule "rtjson.so" loadmodule "jansson.so" loadmodule "dmq.so" loadmodule "dmq_usrloc.so" loadmodule "htable.so" loadmodule "dialog.so" #!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif #!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "log_level_name", "exec") #!endif # ----------------- setting module-specific parameters --------------- # ----- jsonrpcs params ----- modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamailio_rpc.fifo") modparam("jsonrpcs", "pretty_format", 1) # ----- rr params ----- modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamailio_rpc.fifo") modparam("jsonrpcs", "pretty_format", 1) # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- acc params ----- modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_extra","src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd;src_ip=$si") # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default we do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra","src_user=$fU;src_domain=$fd;src_ip=$si;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra","src_user=$fU;src_domain=$fd;src_ip=$si;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") //;calltype=$avp(calltype)") # ----- tm params ----- # ----- the TM module enables stateful processing of SIP requests modparam("tm", "fr_timer", 5000) modparam("tm", "fr_inv_timer", 60000) modparam("tm", "remap_503_500", 0) # ----- usrloc params ----- /* enable DB persistency for location entries */ modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", MULTIDOMAIN) # params needed for NAT traversal in other modules modparam("usrloc", "nat_bflag", FLB_NATB) # ----- nathelper params ----- modparam("nathelper", "received_avp", "$avp(s:rcv)") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:ping@kamailio.org") #modparam("rtimer", "timer", "name=cdr;interval=300;mode=1;") #modparam("rtimer", "exec", "timer=cdr;route=CDRS") #modparam("sqlops", "sqlcon", "ca=>mysql:// kamailio:kamailiorw@10.19.139.113:3306/kamailio") #modparam("dmq", "server_socket", DMQ_SERVER_SOCKET ) modparam("dmq", "server_address", DMQ_SERVER_ADDRESS ) modparam("dmq", "notification_address", DMQ_NOTIFICATION_ADDRESS ) modparam("dmq", "multi_notify", 1) modparam("dmq", "num_workers", 4) modparam("dmq", "ping_interval", 60) modparam("dmq_usrloc", "enable", 1) # -- CPS Limiter modparam("htable", "htable", "rhs=>size=32;initval=0;autoexpire=10;") modparam("htable", "htable", "rhm=>size=32;initval=0;autoexpire=120;") modparam("htable", "enable_dmq", 1) modparam("htable", "dmq_init_sync", 1) modparam("dialog", "profiles_with_value", "concurrent_calls") modparam("dialog", "enable_dmq", 1) # ----- http_async_client params ----- modparam("http_async_client", "workers", HTTP_ASYNC_CLIENT_WORKERS) modparam("http_async_client", "connection_timeout", 2000) ####### Routing Logic ######## # main request routing logic route { if (is_method("KDMQ") && $Rp == 5062) { dmq_handle_message(); } xlog("L_INFO"," ********** Route START ***********"); # log the basic info regarding this call xlog("L_INFO","start|\n"); xlog("L_INFO","===================================================\n"); xlog("L_INFO","New SIP message $rm with call-ID $ci \n"); xlog("L_INFO","---------------------------------------------------\n"); xlog("L_INFO"," received $pr request $rm $ou\n"); xlog("L_INFO"," source $si:$sp\n"); xlog("L_INFO"," from $fu\n"); xlog("L_INFO"," to $tu\n"); xlog("L_INFO","---------------------------------------------------\n"); xlog("L_INFO","---------------------------------------------------\n"); # OPTIONS requests without a username in the Request-URI but one # of our domains or IPs are addressed to the proxy itself and # can be answered statelessly. if (is_method("OPTIONS")) { sl_send_reply("200","OK"); exit; } if ($fU=="ping") { sl_send_reply("200","OK"); exit; } # extract original source ip / port from X-forwarded-For header route(HANDLE_X_FORWARDED_FOR); # per request initial checks route(REQINIT); # NAT detection route(NATDETECT); # handle requests within SIP dialogs ### only initial requests (no To tag) # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()){ route(RELAY); } exit; } # handle retransmissions if (!is_method("ACK")) { if(t_precheck_trans()) { t_check_trans(); xlog("L_INFO", "ROUTE - Exiting after Retransmission check - method $rm"); exit; } t_check_trans(); } route(WITHINDLG); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers xlog("L_INFO", "ROUTE - Removing Headers"); remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")){ t_on_failure("MANAGE_FAILURE"); xlog("L_INFO", "ROUTE - Recording Route"); record_route(); if (is_method("INVITE") && is_request()) { if (has_body("application/sdp")) { xlog("L_INFO", "ROUTE - goiing to t_on_reply[ON_REPLY]\n"); t_on_reply("ON_REPLY"); } } } if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","ROUTE - Address Incomplete"); exit; } route(TOCARRIER); xlog("L_INFO", " ********** Route END *************"); } # extract original source ip / port from X-forwarded-For header route[HANDLE_X_FORWARDED_FOR] { if (is_present_hf("X-Forwarded-For")) { $var(source_ip) = $(hdr(X-Forwarded-For){s.select,0,:}); $var(source_port) = $(hdr(X-Forwarded-For){s.select,1,:}); } else { $var(source_ip) = $si; $var(source_port) = $sp; } $var(to_number) = $rU; } route[RELAY_API] { xlog("L_INFO","RELAY_API - from_ip $var(source_ip):$var(source_port) from_number $fU to_number $ru"); $http_req(all) = $null; $http_req(suspend) = 1; $http_req(timeout) = HTTP_API_TIMEOUT; $http_req(method) = "POST"; $http_req(hdr) = "Content-Type: application/json"; jansson_set("string","from_ip",$var(source_ip), "$var(http_routing_query)"); jansson_set("string","from_port",$var(source_port), "$var(http_routing_query)"); jansson_set("string","from_number",$fU, "$var(http_routing_query)"); jansson_set("string","to_number",$var(to_number) , "$var(http_routing_query)"); xlog("L_INFO","RELAY_API - API ASYNC ROUTING REQUEST: $var(http_routing_query)\n"); $http_req(body) = $var(http_routing_query); t_newtran(); http_async_query(HTTP_API_ROUTING_ENDPOINT, "RELAY_API_RESPONSE"); } # Relay request using the API (response) route[RELAY_API_RESPONSE] { if ($http_ok==1 && $http_rs==200) { xlog("L_INFO","RELAY_API_RESPONSE - RESPONSE: $http_rb\n"); if (jansson_get("rtjson", $http_rb, "$var(rtjson)")) { xlog("L_INFO","RELAY_API_RESPONSE - $var(rtjson)"); rtjson_init_routes("$var(rtjson)"); rtjson_push_routes(); # relay the message t_on_branch("MANAGE_BRANCH"); t_on_failure("MANAGE_FAILURE"); route(RELAY); return; } } send_reply(500, "API Not Available - http response = $http_rs $http_ok"); exit; } onreply_route[ON_REPLY] { xlog("L_INFO", "ON_REPLY - In onreply_route[ON_REPLY] $rs"); # on reply if (t_check_status("183|180|200")) { xlog("L_INFO", "ON_REPLY - Fixing Contacts"); # subst_hf("Contact","/@.*:/@EXTERNAL_IP_ADDR:/","a"); //subst_hf("Record-Route","/INTERNAL_IP_ADDR/EXTERNAL_IP_ADDR/","f"); } if (has_body("application/sdp")){ if (sdp_remove_line_by_prefix("a=maxptime")){ xlog("L_INFO", "ON_REPLY - remove maxptime "); msg_apply_changes(); } else{ xlog("L_INFO", "ON_REPLY - did not removed maxptime "); } } if (t_check_status("408")) { xlog("L_INFO", "ROUTE - Handling 408 Timeout\n"); } } route[TOCARRIER]{ #using rtjson, unsomment following line route(RELAY_API); } # Per SIP request initial checks route[REQINIT] { xlog("L_INFO", "REQINIT - Starting"); if (!mf_process_maxfwd_header("10")) { xlog("L_INFO", "REQINIT - 483 - Too Many Hops"); sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("L_INFO","REQINIT - Sanity Check -> Malformed SIP message from $si:$sp\n"); exit; } } # Caller NAT detection route[NATDETECT] { xlog("L_INFO", "NATDETECT - Entering"); #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (is_method("REGISTER")) { xlog("L_INFO", "NATDETECT - Fix Nated Register"); fix_nated_register(); } else { if(is_first_hop()){ xlog("L_INFO", "NATDETECT - Set Contact Alias"); set_contact_alias(); } } xlog("L_INFO", "NATDETECT - Set FLT_NATS" + FLT_NATS); setflag(FLT_NATS); } #!endif xlog("L_INFO", "NATDETECT - NAT Detect set FLT_NTS = " + FLT_NATS); return; } # Handle requests within SIP dialogs route[WITHINDLG] { xlog("L_INFO", "WITHINDLG - Entering"); if (!has_totag()) return; if (is_present_hf("Route") && $hdrc(Route)==1) { if (search_hf("Route", ".*EXTERNAL_IP_ADDR.*", "f")) { xlog("L_INFO", "WITHINDLG - Removing the route to self"); remove_hf("Route"); } } # sequential request within a dialog should # take the path determined by record-routing if (loose_route()) { route(DLGURI); if (is_method("BYE|CANCEL")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } else if ( is_method("ACK") ) { # ACK is forwarded statelessy xlog("L_INFO", "WITHINDLG - Going to NATMANAGE"); route(NATMANAGE); } else if ( is_method("NOTIFY") ) { #Add Record-Route for in-dialog NOTIFY as per RFC 6665. record_route(); } if(is_method("BYE")) xlog("L_INFO", "WITHINDLG - BYE message from $rU"); route(RELAY); exit; } if ( is_method("ACK|BYE|INVITE|UPDATE") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server route(RELAY); exit; } else { # ACK without matching transaction. Try to route anyway - being optimistic # since it has at least a To Tag route(RELAY); exit; } } sl_send_reply("404","Not here"); xlog("L_INFO", "WITHINDLG - Finishing WITHINDLG"); exit; } # URI update for dialog requests route[DLGURI] { xlog("L_INFO", "WITHINDLG - Entering DLGURI"); #!ifdef WITH_NAT if(!isdsturiset()) { xlog("L_INFO", "WITHINDLG - Handle ruri ALIAS"); handle_ruri_alias(); } #!endif return; } # Routing to foreign domains ---> NOT USED route[SIPOUT] { xlog("L_INFO", "WITHINDLG - Entering SIPOUT"); if (uri==myself){ xlog("L_INFO", "WITHINDLG - URI is MySelf!"); return; } append_hf("P-hint: outbound\r\n"); xlog("L_INFO", "WITHINDLG - Finishing SIPOUT"); route(RELAY); exit; } # Wrapper for relaying requests route[RELAY] { xlog("L_INFO", " ******** RELAY *******"); xlog("L_INFO", "RELAY - $si $su $ru"); # enable additional event routes for forwarded requests # - serial forking, RTP relaying handling, a.s.o. if (is_method("INVITE|BYE|CANCEL|SUBSCRIBE|UPDATE")) { if(!t_is_set("branch_route")) { xlog("L_INFO", "RELAY - branch_route NOT SET!"); t_on_branch("MANAGE_BRANCH"); } } xlog("L_INFO", "RELAY - checking method"); if (is_method("INVITE|SUBSCRIBE|UPDATE")) { xlog("L_INFO", "RELAY - is INVITE|SUBSCRIBE|UPDATE"); if(!t_is_set("onreply_route")) { xlog("L_INFO", "RELAY - onreply_route NOT SET!"); t_on_reply("ON_REPLY"); # MANAGE_REPLY"); } } if (is_method("INVITE")) { xlog("L_INFO", "RELAY - is INVITE"); t_on_failure("FAILED_RELAY"); if(!t_is_set("failure_route")) { xlog("L_INFO", "RELAY - failure_route NOT SET!"); t_on_failure("MANAGE_FAILURE"); } } if (!t_relay()) { xlog("L_INFO", "RELAY - t_relay returns FALSE"); route("MANAGE_FAILURE"); #sl_reply_error(); } xlog("L_INFO", "RELAY - exiting"); exit; } failure_route[FAILED_RELAY] { xlog("L_INFO", "FAILED_RELAY - Entering"); if (t_check_status("[4-5][0-9][0-9]")){ xlog("L_INFO", "FAILED_RELAY - Could not reach destination endpoint!"); if (rtjson_next_route()) { xlog("L_INFO", "MANAGE_FAILURE - Getting next route"); t_on_branch("MANAGE_BRANCH"); t_on_failure("MANAGE_FAILURE"); route(RELAY); } } } route[NATMANAGE] { xlog("L_INFO", "NATMANAGE - Entering"); #!ifdef WITH_NAT if (is_request()) { if(has_totag()) { xlog("L_INFO", "NATMANAGE - nat=yes --- Setting FLB_NATB"); setbflag(FLB_NATB); } } if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB) )) { xlog("L_INFO", "NATMANAGE - NO FLT_NATS/B Set!!! Getting out of NATMANAGE"); return; } if (is_request()) { xlog("L_INFO", "NATMANAGE - is_request - $rm from $si"); if (!has_totag()) { if(t_is_branch_route()) { xlog("L_INFO", "NATMANAGE - adding nat=yes"); add_rr_param(";nat=yes"); } } } if (is_reply()) { xlog("L_INFO", "NATMANAGE - is_reply - $rm from $si"); if(isbflagset(FLB_NATB)) { if(is_first_hop()) { xlog("L_INFO", "NATMANAGE - Set Contact Alias"); set_contact_alias(); } } } #!endif return; } # Manage failure routing cases route[MANAGE_FAILURE] { xlog("L_INFO", "MANAGE_FAILURE - Entering "); route(NATMANAGE); xlog("L_INFO", "MANAGE_FAILURE - t_is_canceled"); if (t_is_canceled()) exit; #!ifdef WITH_BLOCK3XX # block call redirect based on 3xx replies. if (t_check_status("3[0-9][0-9]")) { xlog("L_INFO", "MANAGE_FAILURE - SIP 3XX returned!!"); t_reply("404","Not found"); exit; } #!endif #!ifdef WITH_BLOCK401407 # block call redirect based on 401, 407 replies. if (t_check_status("401|407")) { xlog("L_INFO", "MANAGE_FAILURE - SIP 401|407 returned!!"); t_reply("404","Not found"); exit; } #!endif if (t_check_status("503")){ xlog("L_INFO", "MANAGE_FAILURE - SIP 503 returned : no destination available"); t_reply("503", "Destination not available"); exit; } if (rtjson_next_route()) { xlog("L_INFO", "MANAGE_FAILURE - Getting next route!!"); t_on_branch("MANAGE_BRANCH"); t_on_failure("MANAGE_FAILURE"); route(RELAY); exit; } } # Manage outgoing branches branch_route[MANAGE_BRANCH] { xlog("L_INFO","MANAGE_BRANCH - New branch [$T_branch_idx] to $ru\n"); xlog("L_INFO", "MANAGE_BRANCH - branch_route MANAGE_BRANCH 1 "); rtjson_update_branch(); route(NATMANAGE); } Any help would be greatly appreciated. Thanks in advance. *Sérgio *

1 0

Question syntax check / plausi check kamailio.cfg
by Valentin Christoph 04 Mar '24

04 Mar '24

Dear all, Is there any other possibility to (automatically) check the plausibility/syntax of an existing kamailio.cfg, besides kamailio -c -f kamailio.cfg ? Thanks, Christoph

3 2

DMQ module failure
by Sergio Charrua 01 Mar '24

01 Mar '24

Hi all! I'm testing the DMQ module, but having difficulties setting it up. [...] My kamailio.cfg is as follows : [...] listen=udp:0.0.0.0:5060 listen=tcp:0.0.0.0:5060 [...] modparam("dmq", "server_address", "sip:10.20.0.2:5062") #DMQ_SERVER_ADDRESS modparam("dmq", "notification_address", "sip:10.20.0.4:5062 ")#DMQ_NOTIFICATION_ADDRESS modparam("dmq", "multi_notify", 1) modparam("dmq", "num_workers", 4) modparam("dmq", "ping_interval", 15) modparam("dmq_usrloc", "enable", 1) If I check syntax (using -c parameter) all is ok. Once I start Kamailio, the following error appears on system log: INFO: dmq [dmq.c:164]: make_socket_str_from_uri(): unknown transport protocol - fall back to udp ERROR: dmq [dmq.c:241]: mod_init(): server_uri is not a socket the proxy is listening on ERROR: <core> [core/sr_module.c:1030]: init_mod(): Error while initializing module dmq (/usr/local/lib64/kamailio/modules/dmq.so) I have used UDP as well as SIP as protocols for Server Address and Notification Address, used port 5060 and 5062 (and others too), even added a new listen=udp:0.0.0.0:5062, as well as listen=tcp:0.0.0.0:5062 but the result is always the same. Using Kamailio 5.7.4 on RHEL 9 with SELINUX set to enforcing (if relevant). No firewall active. local IP address is 10.20.0.1 second kamailio node IP address is 10.20.0.4 Any ideas? At first sight, it seems to be all set as per documentation. I even found other configurations online, and apart from the IP address, all is similar. Thanks in advance, *Sérgio Charrua* *www.voip.pt <http://www.voip.pt/>*

2 2

Answer OPTIONS from an Asterisk
by Ludovic ELUECQUE 28 Feb '24

28 Feb '24

Hello, I've been using Kamailio to replace a Telcobridge ProSBC for several days now, but I've been stuck for a whole day on a simple concept My Kamaillio is connected to an Asterisk to which it redirects requests. However, this Asterisk sends OPTIONS requests in order to ping the phone. On the Kamailio side, I don't know how to respond to these requests. I've done tons of research but I can't find anything similar, maybe there's something very obvious I'm missing.... If I t_relay the message it never receives a reply via the phone's public ip/port. Thanks in advance if anyone could help me with this. Please apologize if it's a dumb thing. SIP OPTIONS: 2024/02/28 23:28:25.181663 100.66.138.5:5060 -> 100.66.138.7:5060 OPTIONS sip:110@100.66.138.7:5060 SIP/2.0 Via: SIP/2.0/UDP 100.66.138.5:5060 ;rport;branch=z9hG4bKPje213d53f-fd1d-47f2-b0f8-fd3a8bf5188c From: <sip:110@100.66.138.5>;tag=46e51407-77b0-47f1-af73-cd8bec95b179 To: <sip:110@100.66.138.7> Contact: <sip:110@100.66.138.5:5060> Call-ID: 74401738-d874-4c5c-a4b5-b74514361043 CSeq: 50224 OPTIONS Max-Forwards: 70 User-Agent: Asterisk Content-Length: 0 ============= kamailio.cfg #!KAMAILIO #!define WITH_MYSQL #!define WITH_AUTH #!define WITH_USRLOCDB #!define WITH_RTPENGINE # define WITH_ANTIFLOOD #!define WITH_WEBSOCKETS #!define WITH_TLS #!define WITH_NAT ... #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; #!endif ####### DEFINE VARIABLE ######## #!substdef "!MY_IP_ADDR!X.X.X.X!g" #!substdef "!MY_WS_PORT!8080!g" #!substdef "!MY_WSS_PORT!4443!g" #!substdef "!MY_WS_ADDR!tcp:MY_IP_ADDR:MY_WS_PORT!g" #!substdef "!MY_WSS_ADDR!tls:MY_IP_ADDR:MY_WSS_PORT!g" #!substdef "!MY_MSRP_PORT!4444!g" #!substdef "!MY_WSS_ADDR!tls:MY_IP_ADDR:MY_WSS_PORT!g" #!substdef "!MY_MSRP_ADDR!tls:MY_IP_ADDR:MY_MSRP_PORT!g" #!substdef "!MSRP_MIN_EXPIRES!1800!g" #!substdef "!MSRP_MAX_EXPIRES!3600!g" ####### Include Local Config If Exists ######### import_file "kamailio-local.cfg" ####### Defined Values ######### # *** Value defines - IDs used later in config #!ifdef WITH_DEBUG #!define DBGLEVEL 3 #!else #!define DBGLEVEL 2 #!endif #!ifdef WITH_MYSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!trydef DBURL "mysql://kamailio:kamailiorw@localhost/kamailio" #!endif #!ifdef WITH_MULTIDOMAIN # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif # - flags # FLT_ - per transaction (message) flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 # FLB_ - per branch flags #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 ####### Global Parameters ######### /* LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR, ... */ debug=DBGLEVEL /* set to 'yes' to print log messages to terminal or use '-E' cli option */ log_stderror=no memdbg=5 memlog=5 log_facility=LOG_LOCAL0 log_prefix="{$mt $hdr(CSeq) $ci} " /* number of SIP routing processes for each UDP socket * - value inherited by tcp_children and sctp_children when not set explicitely */ children=8 /* uncomment the next line to disable TCP (default on) */ # disable_tcp=yes /* number of SIP routing processes for all TCP/TLS sockets */ # tcp_children=8 /* uncomment the next line to disable the auto discovery of local aliases * based on reverse DNS on IPs (default on) */ # auto_aliases=no /* add local domain aliases - it can be set many times */ # alias="sip.mydomain.com" /* listen sockets - if none set, Kamailio binds to all local IP addresses * - basic prototype (full prototype can be found in Wiki - Core Cookbook): * listen=[proto]:[localip]:[lport] advertise [publicip]:[pport] * - it can be set many times to add more sockets to listen to */ listen=udp:X.X.X.X:5060 listen=udp:100.66.138.7:5060 /* life time of TCP connection when there is no traffic * - a bit higher than registration expires to cope with UA behind NAT */ tcp_connection_lifetime=3605 /* upper limit for TCP connections (it includes the TLS connections) */ tcp_max_connections=2048 #!ifdef WITH_JSONRPC tcp_accept_no_cl=yes #!endif #!ifdef WITH_TLS enable_tls=yes /* upper limit for TLS connections */ tls_max_connections=2048 #!endif /* set it to yes to enable sctp and load sctp.so module */ enable_sctp=no ####### Custom Parameters ######### /* These parameters can be modified runtime via RPC interface * - see the documentation of 'cfg_rpc' module. * * Format: group.id = value 'desc' description * Access: $sel(cfg_get.group.id) or @cfg_get.group.id */ #!ifdef WITH_PSTN /* PSTN GW Routing * * - pstn.gw_ip: valid IP or hostname as string value, example: * pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" * * - by default is empty to avoid misrouting */ pstn.gw_ip = "" desc "PSTN GW Address" pstn.gw_port = "" desc "PSTN GW Port" #!endif #!ifdef WITH_VOICEMAIL /* VoiceMail Routing on offline, busy or no answer * * - by default Voicemail server IP is empty to avoid misrouting */ voicemail.srv_ip = "" desc "VoiceMail IP Address" voicemail.srv_port = "5060" desc "VoiceMail Port" #!endif ####### Modules Section ######## /* set paths to location of modules */ # mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/" #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif #!ifdef WITH_JSONRPC loadmodule "xhttp.so" #!endif loadmodule "jsonrpcs.so" loadmodule "kex.so" loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "textopsx.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule "acc.so" loadmodule "counters.so" loadmodule "rtpengine.so" #loadmodule "rtpproxy.so" #!ifdef WITH_WEBSOCKETS loadmodule "xhttp.so" loadmodule "websocket.so" # loadmodule "nathelper.so" #!endif #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so" #!endif #!endif #!ifdef WITH_ALIASDB loadmodule "alias_db.so" #!endif #!ifdef WITH_SPEEDDIAL loadmodule "speeddial.so" #!endif #!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif #!ifdef WITH_NAT loadmodule "nathelper.so" #!ifdef WITH_RTPENGINE #!else #!loadmodule "rtpproxy.so" #!endif #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_ANTIFLOOD loadmodule "htable.so" loadmodule "pike.so" #!endif #!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif # ----------------- setting module-specific parameters --------------- # ----- jsonrpcs params ----- modparam("jsonrpcs", "pretty_format", 1) /* set the path to RPC fifo control file */ # modparam("jsonrpcs", "fifo_name", "/run/kamailio/kamailio_rpc.fifo") /* set the path to RPC unix socket control file */ # modparam("jsonrpcs", "dgram_socket", "/run/kamailio/kamailio_rpc.sock") #!ifdef WITH_JSONRPC modparam("jsonrpcs", "transport", 7) #!endif # ----- ctl params ----- /* set the path to RPC unix socket control file */ # modparam("ctl", "binrpc", "unix:/run/kamailio/kamailio_ctl") # ----- sanity params ----- modparam("sanity", "autodrop", 0) # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) #rtp modparam("rtpengine", "rtpengine_sock", "udp:127.0.0.1:2223") modparam("rtpengine", "force_send_interface", "100.66.138.7") #modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") # ----- rr params ----- # set next param to 1 to add value to ;lr param (helps with some UAs) modparam("rr", "enable_full_lr", 0) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ # modparam("registrar", "max_contacts", 10) /* max value for expires of registrations */ modparam("registrar", "max_expires", 3600) /* set it to 1 to enable GRUU */ modparam("registrar", "gruu_enabled", 0) /* set it to 0 to disable Path handling */ modparam("registrar", "use_path", 1) /* save Path even if not listed in Supported header */ modparam("registrar", "path_mode", 0) # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default ww do not adjust the direct of the sequential requests. * if you enable this parameter, be sure the enable "append_fromtag" * in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif # ----- usrloc params ----- modparam("usrloc", "timer_interval", 60) modparam("usrloc", "timer_procs", 1) modparam("usrloc", "use_domain", MULTIDOMAIN) /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) #!endif # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN) # ----- permissions params ----- #!ifdef WITH_IPAUTH modparam("permissions", "db_url", DBURL) modparam("permissions", "load_backends", 1) #!endif #!endif # ----- alias_db params ----- #!ifdef WITH_ALIASDB modparam("alias_db", "db_url", DBURL) modparam("alias_db", "use_domain", MULTIDOMAIN) #!endif # ----- speeddial params ----- #!ifdef WITH_SPEEDDIAL modparam("speeddial", "db_url", DBURL) modparam("speeddial", "use_domain", MULTIDOMAIN) #!endif # ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", DBURL) /* register callback to match myself condition with domains list */ modparam("domain", "register_myself", 1) #!endif #!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) # ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) #!endif #!ifdef WITH_NAT #!ifdef WITH_RTPENGINE # ----- rtpengine params ----- #modparam("rtpengine", "rtpengine_sock", "udp:127.0.0.1:2223") #!else # ----- rtpproxy params ----- #!modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") #!endif # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:pinger@sip.super.fr") #modparam("nathelper", "sipping_method", "OPTIONS") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/etc/kamailio/tls.cfg") #!endif #!ifdef WITH_ANTIFLOOD # ----- pike params ----- modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 40) modparam("pike", "remove_latency", 4) # ----- htable params ----- /* ip ban htable with autoexpire after 5 minutes */ modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "cfgtrace", 1) modparam("debugger", "log_level_name", "exec") #!endif ######## websocket ############ #!ifdef WITH_TLS enable_tls=yes #!endif listen=MY_IP_ADDR #!ifdef WITH_WEBSOCKETS listen=MY_WS_ADDR tcp_accept_no_cl=yes # tcp_rd_buf_size=65536 #!ifdef WITH_TLS listen=MY_WSS_ADDR #!endif #!endif ######## SECURITY ####### server_signature=no sip_warning=0 user_agent_header="User-Agent: SIP Server" ####### Routing Logic ######## /* Main SIP request routing logic * - processing of any incoming SIP request starts with this route * - note: this is the same as route { ... } */ request_route { route(REQINIT); route(NATDETECT); route(REGISTER); route(INVITE); route(ACK); route(BYE); return; } # Wrapper for relaying requests #Check initial detail route[REQINIT] { # no connect for sending replies set_reply_no_connect(); # enforce symmetric signaling # - send back replies to the source address of request force_rport(); if($ua =~ "friendly|scanner|sipcli|sipvicious|VaxSIPUserAgent|pplsip") { # silent drop for scanners - uncomment next line if want to reply # sl_send_reply("200", "OK"); exit; } if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); exit; } if(is_method("OPTIONS") && uri==myself && $rU==$null) { sl_send_reply("200", "Keepalive"); exit; } if(!sanity_check("17895", "7")) { xlog("Malformed SIP request from $si:$sp\n"); exit; } } # Caller NAT detection route[NATDETECT] { #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (is_method("REGISTER")) { fix_nated_register(); } else { if(is_first_hop()) { set_contact_alias(); } } setflag(FLT_NATS); } #!endif return; } route[REGISTER] { if (is_method("REGISTER")) { t_on_reply("1"); force_send_socket(100.66.138.7:5060); t_relay_to_udp("100.66.138.5", "5060"); exit(); } } route[INVITE] { if (( is_method("REFER")) || is_method("INVITE") ||is_method("NOTIFY")) { record_route(); if (src_ip == "100.66.138.5") { if(lookup("location") && !is_method("OPTIONS")) { xlog("L_NOTICE", "user enregistrax"); force_send_socket(X.X.X.X:5060); rtpengine_manage("replace-origin replace-session-connection media-address=X.X.X.X direction=priv direction=pub"); t_relay(); } else { sl_send_reply("403","Not registred"); } } else { force_send_socket(100.66.138.7:5060); rtpengine_manage("replace-origin replace-session-connection media-address=100.66.138.7 direction=pub direction=priv"); t_relay_to_udp("100.66.138.5", "5060"); } } } route[ACK] { if (is_method("ACK")) { if (src_ip == "100.66.138.5") { force_send_socket(udp:X.X.X.X:5060); t_relay(); } else { force_send_socket(udp:100.66.138.7:5060); t_relay(); } exit(); } } route[BYE] { if (is_method("BYE|CANCEL")) { if (src_ip == "100.66.138.5") { force_send_socket(udp:X.X.X.X:5060); t_relay(); } else { force_send_socket(udp:100.66.138.7:5060); t_relay(); } exit(); } } onreply_route { if (status=~ "180|183") { rtpengine_manage("replace-origin replace-session-connection"); } if (status=~ "200") { if(has_body("application/sdp")) { rtpengine_manage("replace-origin replace-session-connection"); } } } onreply_route[1] { if (status=~ "2[0-9][0-9]"){ save("location"); xlog("L_NOTICE", "enregistrement"); } } ====================

2 1

best approach to setup SIP Session sharing between servers
by Sergio Charrua 28 Feb '24

28 Feb '24

Hi all! I am having some difficulties/doubts on what would be the best approach to let multiple Kamailio servers share their SIP sessions between each other. The goal is to have HA on Kamailio cluster such that if a call is received and initiated on Kamailio #1, and during any moment of the call (before or while established) if the server #1 goes down or Kamailio stops working for any reason, the call can be processed by Kamailio server #n available in the cluster. I do not want to mess with Virtual IPs or DNS, that is not the point, but instead need to get a proper way to share SIP sessions between Kamailio servers such that any server could continue the call without issue. I have checked the Dialog and DMQ module, but I am not sure if that is the way to go.... Could any one share a solution for this? Greatly appreciated. Cheers, *Sérgio Charrua* *www.voip.pt <http://www.voip.pt/>*

8 11

Clarification on pv_www_authenticate
by James Lipski 28 Feb '24

28 Feb '24

Hello, I would like get further information on the "pv_www_authenticate" function from auth module. For the response code "-1", which is listed as "generic error", what exactly is covered when this function returns this? Is it just everything else that isn't listed reason (invalid password, nonce expired, no credentials, etc...). On my production system, I'm seeing this as a response code on some registration requests, and just want to know what is causing this (enabling full verbose logging is a bit difficult on my production system, and want to try to replicate it on my test environment, however just need clarification on what this covers). Thank you.

2 1

Topos methods_nocontact parameter
by Benoit Panizzon 27 Feb '24

27 Feb '24

Hi I'm having another go at topos trying to solve an issue of sip messages getting to big for certain clients to process. Unfortunately some methods (ACK/PRACK/BYE probably CANCEL) do not contain a contact header, therefore the topology is still revealed (and potentially a lot of via header inserted increasing message size). Is it safe to set methods_nocontact to an empty string to force creation of a Contact header for every SIP method? Is there another way to completely hide topology aka keeping header small? Mit freundlichen Grüssen -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

3 7

How to keep SIP messages small, possibly below fragmentation limit?
by Benoît Panizzon 26 Feb '24

26 Feb '24

Hi In the process of getting rid of our commercial B2Bua SBC and handling all clients directly via Kamailio... We have come across some (unfortunately many we have in use) CPE which have an issue with fragmented packets or which simply do not allocate enough memory to parse or create messages of a certain size. Their SIP stack just crashes with errors like 'message to large for send buffer' and similar. This affects messages with containing as little as 5 via and 4 record-route header and a couple of codec in the SDP. Is there a recipe for trying to keep packets as small as possible? I would like to avoid using the topos module as I issues with this module completely failing in certain situations. -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

2 2

Development is open for future release of v5.9.x series
by Daniel-Constantin Mierla 23 Feb '24

23 Feb '24

Hello, the branch 5.8 was created, therefore the master branch is open for adding new features, to be part of future release series v5.9.x (or whatever version is decided for next series). Any bug fix committed to master that applies to 5.8.x or older stable branches should be backported as usual with "git cherry-pick -x ..." to appropriate branches like 5.8 or 5.7. Expect that v5.8.0 will be released in a few weeks from now. Based on the workflow used during the past years, the next future release v5.9.0 should be out after another 8-10 months of development, plus 1-2 months of testing, so sometime during the last part of 2024 or the beginning of 2025. Cheers, Daniel -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy, Training and Development Services -- asipto.com Kamailio World Conference, April 18-19, 2024, Berlin -- kamailioworld.com

1 0

Branch 5.8 has been created
by Daniel-Constantin Mierla 23 Feb '24

23 Feb '24

Hello, the branch 5.8 has been created, to be used for releasing v5.8.x series. To check out this branch, the following commands can be used: git clone https://github.com/kamailio/kamailio kamailio-5.8 cd kamailio-5.8 git checkout -b 5.8 origin/5.8 Pushing commits in this branch: git push origin 5.8:5.8 Note that 5.8 is an official stable branch, so only bug fixes, missing kemi exports (discuss on sr-dev if not sure) or improvements to documentation or helper tools can be pushed to this branch. As usual, if there is a bug fixed, commit and push first to master branch and then cherry pick to 5.8 branch: git cherry-pick -x COMMITID In few weeks, the first release from branch 5.8 will be out, respectively Kamailio v5.8.0. Cheers, Daniel -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy, Training and Development Services -- asipto.com Kamailio World Conference, April 18-19, 2024, Berlin -- kamailioworld.com

1 0

Building Debian packages for further modules
by Christian Berger 22 Feb '24

22 Feb '24

Hi, for our workflow we build our own Debian packages for kamailio. We are currently trying and failing to create a package for the kafka modules. What we have tried so far: Adding the "Build-Depends:" entries for librdkafka-dev in debian/control Adding a "Package" in debian/control Adding kafka to the PACKAGE_GROUPS in debian/rules So far it seems to build the module and a package for it, but the package only contains metadata, but no .so file. We are currently running out of ideas. What else can we do? Best wishes Christian Berger -- Christian Berger - berger(a)sipgate.de Telefon: +49 (0)211-63 55 55-0 Telefax: +49 (0)211-63 55 55-22 sipgate GmbH - Gladbacher Str. 74 - 40219 Düsseldorf HRB Düsseldorf 39841 - Geschäftsführer: Thilo Salmon, Tim Mois Steuernummer: 106/5724/7147, Umsatzsteuer-ID: DE219349391 www.sipgate.de - www.sipgate.co.uk

2 2

Kemi questions
by Stefan-Cristian Mititelu 21 Feb '24

21 Feb '24

Hello, When writing kemi cfg (python in my case), is there any way to get rid of standard cfg shared variables and use kemi cfg variables instead? E.g. Instead of $shv(blabla) (in standard config) can I use some global python var called 'blabla'? Is it seen and shared by all kamailio processes? Or I still need to use KSR.pv.get/set("$shv(blabla)") ? Thank you, Stefan

2 3

Freeswitch and Kamailio Integration.
by jayapal＠ring4.com 21 Feb '24

21 Feb '24

Greetings, I am new to Kamailio and seeking assistance. I have installed FreeSWITCH version 1.10.11 and Kamailio version 5.6.5. I have two inquiries: I aim to configure FreeSWITCH with Kamailio. Could someone kindly guide me on achieving this integration? I am curious about the storage location of Kamailio's log files. Could someone please provide information regarding this? Thank you in advance for your help and guidance.

4 4

htable write access state
by Patrick Karton 21 Feb '24

21 Feb '24

Hello are htable protected for multiple write access? can i safely update htable from one process and be sure another process will access it for write operation ? if yes is the lock on all the htable or only on the bucket where the key belongs ? Thanks.

2 1

rpm kamailio git master version
by Henning Westerholt 20 Feb '24

20 Feb '24

Hello, just a question about the https://rpm.kamailio.org/ repository, especially regarding git master builds. It seems that the git master build there was updated last autumn. It would be great if it could be updated, now as we want to test for the coming release. Thank you, Henning Westerholt -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com<https://gilawa.com/>

1 0

dialog:event unknown and kemi callback error
by Duarte Rocha 20 Feb '24

20 Feb '24

Hello all, I'm currently developing some kamailio scripts with app_jsdt by migrating a proxy of mine from Kamailio routing script to Js. I've migrated some parts of my request_route and everything seems to be working fine. I am now trying to migrate my event routes to JS and I started with dialog. dialog parameters : modparam("dialog", "event_callback", "dialogEvent") Code : function dialogEvent(event) { KSR.info("Dialog event " + event + " in JS") } After this i try to make a call and in my logs i have : "Dialog event unknown in JS" "Dialog event dialog:start in JS" Is this normal behaviour that I should ignore and only try to process "start,end,failure" or is this a signal of something wrong in my code? I also have this error in my code : "sr_kemi_cbname_lookup_idx(): index 1 is out of range". Does that mean that i have a JS function that calls a missing function in kamailio script or the opposite? How can I identify the root cause? Thanks in advance, Cheers

1 0

Variable specific to branch reply?
by Benoit Panizzon 20 Feb '24

20 Feb '24

Hi List avp stacking is starting to drive me crazy... Somehow I don't understand what is going on in this situation: I have a main branch, and add two more branches with append_branch() I use a on_branch_route trigger: branch_route[BR_TO_CPE] { [Here, some code setting $var(needbh)] if ("yes" == $var(needbh)) { xlog("L_INFO", "$cfg(route): BR_idx: $T_branch_idx BACKHAUL: YES to $nh(u) \n"); add_rr_param(";rtp=yes"); record_route(); $avp(backhaul) = "yes"; $avp(nexthop) = $nh(u); rtpengine_manage($avp(rtp_to_cpe)); } else { xlog("L_INFO", "$cfg(route): BR_idx: $T_branch_idx BACKHAUL: NO to $nh(u) \n"); record_route(); $avp(backhaul) = "yes"; $avp(nexthop) = $nh(u); } } In the Logs, I see Branches Index 0,1,2 with the desired information. So I have 3 values stacked in the avp backhaul and nexthop, right? When I get a reply, I would like to determine if backhauling is required or not. onreply_route[MANAGE_REPLY] { xlog("L_INFO", "MANAGE_REPLY: for BR_idx: $T_branch_idx\n"); while ($(avp(nexthop)[$var(i)]) != $null) { xlog("L_INFO", "MANAGE_REPLY: DEBUG Branch: $T_branch_idx VAR IDX: $var(i) NH: $(avp(nexthop)[$var(i)]) \n"); $var(i) = $var(i) + 1; } } So on EVERY reply, I would expect to get three "DEBUG" lines as I stacked 3 AVP.. Bug I get only 2! Why I am missing one of the stacked AVP? (the last one as it looks like) Or is there any other way to access a arbitrary variable specific to a branch on the reply to that branch? PS: I don't need $avp(nexthop). It's just an easy way to make sure I get the correct avp index for the branch I am interested in. Mit freundlichen Grüssen -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

1 1

mem_join_free flag in kamailio 5.6 deb
by Arsen Semenov 20 Feb '24

20 Feb '24

Hello! I have an issue with kamailio 5.6.5 after some time of flying there are errors in logs: <core> [core/mem/q_malloc.c:297]: qm_find_free(): > qm_find_free(0x7fc79c286010, 536); Free fragment not found! mem_join=1 by default, but it seems that MEM_JOIN_FREE flag is not defined in this build kamailio -I > Print out of kamailio internals > Version: kamailio 5.6.5 (x86_64/linux) > Default config: /etc/kamailio/kamailio.cfg > Default paths to modules: /usr/lib/x86_64-linux-gnu/kamailio/modules > Compile flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, > DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, > F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, > USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, > HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED > MAX_RECV_BUFFER_SIZE=262144 > MAX_URI_SIZE=1024 > BUF_SIZE=65535 > DEFAULT PKG_SIZE=8MB > DEFAULT SHM_SIZE=64MB > ADAPTIVE_WAIT_LOOPS=1024 > TCP poll methods: poll, epoll_lt, epoll_et, sigio_rt, select > Source code revision ID: unknown > Compiled with: gcc 10.2.1 > Compiled architecture: x86_64 > Compiled on: > OS Debian 11 bullseye However I noticed the flag exists in 5.7 installed from deb Print out of kamailio internals > Version: kamailio 5.7.4 (x86_64/linux) > Default config: /etc/kamailio/kamailio.cfg > Default paths to modules: /usr/lib/x86_64-linux-gnu/kamailio/modules > Compile flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, > DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, > *MEM_JOIN_FREE*, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, > USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, > USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED > MAX_RECV_BUFFER_SIZE=262144 > MAX_URI_SIZE=1024 > BUF_SIZE=65535 > DEFAULT PKG_SIZE=8MB > DEFAULT SHM_SIZE=64MB > ADAPTIVE_WAIT_LOOPS=1024 > TCP poll methods: poll, epoll_lt, epoll_et, sigio_rt, select > Source code revision ID: unknown > Compiled with: gcc 10.2.1 > Compiled architecture: x86_64 > Compiled on: OS Debian 11 bullseye and now, what got me bit confused is that when I build 5.6.5 from source "make printcdefs" gives me this flag, alongside with other flags which I do not see later in "kamailio -v" output. So I am not sure whether this flag was defined during 5.6.5 deb build time or it has been somehow lost? So I need your advice. Regards, Arsen

1 0

How to query, if callid is handled by rtpengine module already?
by Benoît Panizzon 20 Feb '24

20 Feb '24

Hi I have come across this challenge: Initial invite (no to_tag) has is authenticated and has credentials. So a lookup for the username is made to determine if the customer needs backhauling, thus rtpengine needs to be engaged. On a subsequent invite (re-invite to change codec or to refresh session timer) there is a to_tag so it is being routed without sending a challenge and has no auth username. I don't use dialog on the registrar. This is another transaction. So I don't know, if I need to engage rtpengine on that DSP or not. What is the best way to find out, if rtpengine is already handling that callid? if(rtpengine_query_v("j", "$var(dummy)")) { rtpengine_manage(); } basically works, but generates a couple of ugly error messages in the log as rtpengine_query_v does not find the call. Is there a nicer way? -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

2 3

TCP timeout occurs when the uac_req_send sets $ouri = Received (sip:10.11.40.XX:57646;transport=tls) but The Received connection normal
by riffs＠sina.cn 20 Feb '24

20 Feb '24

The connection registered by the client is normal, and the client can send messages and renew the registration normally, but the push message to the client using uac_req_send() from kamailio fails. Location information after the client is registered: ]#kamcmd ul.lookup location test01 Received: sip:10.11.40.XX:57646;transport=tls ]#netstat -anp | grep 57646 "tcp 0 0 10.11.55.xx:5061 10.11.40.XX:57646 ESTABLISHED 3467/kamailio" kamailio.lua KSR.pv.sets("$uac_req(ouri)", rows.received) In this way, most users can receive messages normally, but occasionally some users cannot receive messages but can renew their registration and send messages normally. Once this is the case for this user, the use of uac_req_send() will continue to fail until the client establishes a new connection. If a problem occurs, the following logs are displayed on the server: 2024-02-20T10:01:25.329595+08:00 10.11.55.XX (72819) ERROR: <core> [core/tcp_main.c:4692]: tcpconn_main_timeout(): connect 10.11.40.XX:57646 failed (timeout) The connection already exists and should be normal, why does "tcpconn_main_timeout(): connect 10.11.40.XX:57646 failed (timeout)" occur.

1 0

Dispatcher ping: "binding to source address X.X.X.X:XXXX failed: Address already in use" for TCP and TLS destinations
by Jardar Leira 17 Feb '24

17 Feb '24

We have recently upgraded from 5.6.4 to 5.7.4. No change in the KAMAILIO configuration. On all upgraded servers we are now getting this message in the logs for every destination when the dispatcher sends out OPTIONS to destinations listed in the dispatcher list: WARNING: <core> [core/tcp_main.c:1301]: find_listening_sock_info(): binding to source address X.X.X.X:YYYY failed: Address already in use [98] The X.X.X.X being the servers IP address and YYYY being the servers listening port for tcp and/or tls. It's not consistent. For some servers it's every time OPTIONS is sent. For others it's just now and then. udp destinations have no issues. There are no other processes occupying these ports. Changing the listening port on the KAMAILIO also results in the new port reported as in use. Dispatcher OPTIONS still seems to work for both tcp and tls. Unsurprisingly using a dynamic, unprivileged port > 1023 and not the server port as the source port, as it shouldn't. The packages are sendt and a reply is registered. Inbound OPTIONS are processed as expected by KAMAILIO on the listening port. Have I missed something transitioning from 5.6 -> 5.7, or is this a bug? Relevant config: modparam("dispatcher", "ds_ping_method", "OPTIONS") modparam("dispatcher", "ds_probing_mode", 1) modparam("dispatcher", "ds_probing_threshold", 2) modparam("dispatcher", "ds_ping_interval", 120) modparam("dispatcher", "ds_ping_from", "sip:ping@xxxxxx.xxx") modparam("dispatcher", "ds_ping_latency_stats", 1) OS: Debian Bullseye Kamailio installed from https://deb.kamailio.org/kamailio57 bullseye Best regards, Jardar Leira

3 2

Forward subscriber username via dispatcher
by s.czech＠nowatel.com 16 Feb '24

16 Feb '24

Hi, I'm trying to forward the original username of the peer via Kamailio dispatcher to the Asterisk and I can't get it working. The scenario looks like this: Client Phone (username 1) -> Asterisk Client ---trunk(test-trunk)--> Kamailio Dispatcher/RTPEngine --trunk--> Asterisk Final Client is dialing via Asterisk Client with a simple extension: exten => _X.,1,Set(CALLERID(all)= 587555611 <587555611>) exten => _X.,n,Dial(SIP/${EXTEN}@test-trunk) Asterisk Client is registering to the Kamailio with its own credentials and Kamailio is registering in the Asterisk Final The problem is that I can't find a way to extract the original trunk username (like test-trunk) in the outgoing connection to the Asterisk Final (via Kamailio): Since i'm using the CALLERID on the Asterisk Client all I can see on the Asterisk Final is: INVITE sip:587322591@192.168.20.74 SIP/2.0 Record-Route: <sip:587322591@192.168.20.74;lr;ftag=as52b874a1;nat=yes> Via: SIP/2.0/UDP 192.168.20.74;branch=z9hG4bKc6e3.a77db1f002191ae3ee1a414b63d34a72.0 Via: SIP/2.0/UDP 192.168.21.228:5060;received=192.168.21.228;branch=z9hG4bK705ec94a;rport=5060 Max-Forwards: 69 From: "587555611" <sip:587555611@192.168.21.228>;tag=as52b874a1 To: <sip:587322591@192.168.20.74> Contact: <sip:587555611@192.168.21.228:5060;alias=192.168.21.228~5060~1> Call-ID: 433f9ff84cdb437f0d383797003c232f@192.168.21.228:5060 CSeq: 102 INVITE User-Agent: Asterisk PBX 16.29.0 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE Supported: replaces, timer P-Asserted-Identity: "587555611" <sip:587555611@192.168.21.228> Content-Type: application/sdp Content-Length: 268 There is no way I can forward the 'test-trunk' in the SIP header. I tried to add append_hf to ROUTE[relay] like append_hf("X-Trunk $au r\n"); but if the trunk is already registered then $au is null or the CALLERID value. How to extract the original username (test-trunk) on the Asterisk Final? Do you have any ideas? Thank you in advance ;)

1 0

Latest point releases seem to break early dialog UPDATEs from B-side when using topos (again)
by George Diamantopoulos 16 Feb '24

16 Feb '24

Hello all, I've noticed that there seems to be a regression with the topos module, more specifically the redis flavour, but I'm assuming the storage backend shouldn't make a difference. I have confirmed this affects both 5.6.5 and 5.7-nightly, so I'm assuming some backported commit is to blame. Kamailio 5.6.4 used previously, to the best of my memory, was not affected. Early dialog UPDATEs sent from the callee seem to be somehow malformed, since the 200 OK the UAS produces goes directly to the UAC despite having executed record_route() for the original INVITE. I can't imagine how this is possible, I thought responses always honour the Via header and record route shouldn't play a role in this case, right? Simply turning topos off restores the intended behaviour, however, so I can't help but think this is somehow related. Here's two call flows demonstrating the behaviour: * Topos on, 200 OK to UPDATE missing: https://pastebin.com/raw/J0zQeM5g * Topos off, 200 OK to UPDATE routed correctly: https://pastebin.com/raw/49yErezb I was wondering if anyone is aware of any commits that might be responsible for this. Additionally, is there an archive of debian packages with previous point releases so that I can confirm this regression with the latest versions? Thank you! Best regards, George

2 3

Reject TCP SYN
by David Villasmil 15 Feb '24

15 Feb '24

Hello all, Is there any way of actually rejecting (RST) NEW tcp connection attempts, while allowing the ongoing ones to finish naturally? I’m thinking maybe we can add this feature? Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

3 4

uacreg - memory vs database
by Aymeric Moizard 15 Feb '24

15 Feb '24

Hi! I would like to add/remove/update entries in uacreg database. The easiest way I found is to add data using mysql and then call kamcmd uac.reg_reload. I end up reloading too often: uac_reg_ht_shift(): shifting in-memory table is not possible in less than 150 secs I would like to optimize it and I tried to use sudo kamcmd uac.reg_add Unfortunately, the data is not persistent and seems to be only in memory. Does it means my only choice is to follow this procedure: Add a user: 1/ sudo kamcmd uac.reg_add 2/ add the equivalent mysql entry Remove a user 1/ sudo kamcmd uac.reg_remove 2/ remove the equivalent mysql entry Let me know if an alternative exists! Regards Aymeric -- Antisip - http://www.antisip.com

2 2

Kamailio as a Presence server only
by djcsalvador＠gmail.com 15 Feb '24

15 Feb '24

I all, I'm looking into Kamailio as a solution to replace our current Presence Server in our IMS Network, but feeling a bit overwhelmed by the feature size and complexity of Kamailio. I have a few questions (some might be dumb), if you guys could help me I would appreciate. 1. As I only need Kamailio as a Presence Server (with XCAP and SIP Interface), is there a way to install only the necessary components and/or modules? Our security team would probably raise some questions if we need to install unused code on the network. For what I could investigate, the modules i would need are: * Presence * Presence_XML * Xcap_server * xhttp * RLS * Pua * database * sl * tm Am I missing something? 2- As refered on point 1, our server will need a xcap and sip interface. Some presence updates will come through XCAP, others from SIP Publish. My question is, whenever a presence update is made through XCAP interface, will the kamailio server trigger the necessary SIP Notify to notify all Subscribed users ? I ask this because this was a problem with our current supplier. 3 - our client is a bit "peeky" with performance. I found here (https://www.kamailio.org/wikidocs/kemi/performance-tests/5.2.x/#results) some performance tests, but for what i can see the test primary goal was to test the response time. Is there any resource on "requests per second"? Thanks in advance for all the help David Salvador

2 4

Kamailio - handover between LTE and Wifi
by Christian Hahn 15 Feb '24

15 Feb '24

Hi all, While researching for Open Source IMS Services I’v found the presentation “What’s up with IMS & VoLTE?” at KamailioWorld 2018. There is a quote that raises a question: “Things, you shouldn’t expect (at least initially): ● Seamless handover between LTE and Wifi, as this requires some integration with the PGW of the LTE” My question is: Has the VoLTE <-> VoWiFi Handover been implemented in the meantime? BR Christian

3 3

Trying to better understand pre-made IMS configs
by Enzo Damato 10 Feb '24

10 Feb '24

Hello. I am a new Kamailio user, and I have been following the instructions for setting up a new IMS system. So far, I have a system that is working with the default example configs, but I am am trying to figure out the best way to expand on these default configurations. Currently, from my reading, the pcscf and icscf have minimal configuration/customization beyond the basic setting required to get them working, and most of the configuration related to routing, features, and other typical telecom customization should be done in the scscf. Is this mostly correct? Additionally, is there a guide to the features that are required in order to get the IMS systems working above and beyond the minimal config to get Kamailio itself working, so that I know what it's safe to modify and what should be left alone? Thank you, Enzo Damato

1 0

High CPU with DMQ on ARM64 (graviton) - Tuning values for DMQ worker_usleep
by Ben Kaufman 09 Feb '24

09 Feb '24

I encountered a behavior with DMQ using excessive CPU when running kamailio 5.8 on AWS Graviton processors (running in Docker on Amazon Linux 2023), even on an otherwise idle system. Finding the issue below pointed me towards using polling. I set the value for worker_usleep to 1000 as a test, and that seems to have resolved the CPU issue, but I have no idea of what a "good" value is for this setting, and 1000 was simply the example present in the documentation. My specific use case for DMQ is synchronizing USRLOC data for ~7,500 users, registering with expiration times of 60 - 300 seconds with 7 - 9 nodes on the DMQ bus. Any general recommendations on tuning values for this setting? https://github.com/kamailio/kamailio/issues/822 Regards, Kaufman

2 3

PRACK RFC3262
by Social Boh 09 Feb '24

09 Feb '24

Does Kamailio support the SIP PRACK method? If yes, How? Regards -- --- I'm SoCIaL, MayBe

3 3

Release_tcpconnection when using RTJSON routing with TLS
by kjartan.solli＠intility.no 08 Feb '24

08 Feb '24

Hello, I wish to use RTJSON for routing inbound calls from Kamailio to external endpoint(s), based on JSON received from my API. My rtjson setup is based on guide below, with my route(RELAY) sending Invite via t_relay(); https://wazo-platform.org/blog/kamailio-routing-with-rtjson-and-http-async-… I am including rtjson_init_routes("$var(rtjson)");, rtjson_push_routes(); & rtjson_update_branch(); in my routes. Also have defined: listen=tls:10.129.1.168:5061 advertise ${PUBLIC_IPV4}:5061 Routing from rtjson is working fine for TCP / UDP connections, however - once I try to forward an INVITE via rtjson using TLS, then the TLS connection is simply closed with Kamailio reporting "tcp_read_data(): EOF on connection". Please see logs and setup below. - tcp_reuse_port = yes, tcp_children = 8, tcp_accept_no_cl= yes & tcp_connection_lifetime=3605 - Also no success with tcp_reuse_port = no - I have HOMER setup and see here that SIP headers from the RTJSON is being used (Outbound SIP Invites is being duplicated to HOMER before connection is released) - I see no drop in traffic from my firewall As you can see from logs below, Kamailio is reusing the socket (0x7fc3ebc65060) from the exsisting connection (not new socket 0x7fc3ef70aab0). I am sending SIP Options toward the external endpoint (which is working fine), and my theory is that Kamailio is reusing the exisitng SIP OPTIONS tcp connection for the SIP INVITE and somehow close the connection when RTJSON is used (since routing without RTJSON is working fine). Any idea how to solve this? Thank you! (x.x.x.x:5061 is external endpoint) 14(43) DEBUG: rtjson [rtjson_routing.c:364]: rtjson_init_serial(): rewrite dst-uri to: [sip:x.x.x.x:5061;transport=tls] 14(43) DEBUG: rtjson [rtjson_routing.c:388]: rtjson_init_serial(): trying to set send socket to: [tls:10.129.1.168:5061] 14(43) DEBUG: <core> [core/socket_info.c:726]: grep_sock_info(): checking if host==us: 12==12 && [10.129.1.168] == [10.129.1.168] 14(43) DEBUG: <core> [core/socket_info.c:730]: grep_sock_info(): checking if port 5061 (advertise 5061) matches port 5061 ......... 14(43) DEBUG: tm [../../core/forward.h:276]: msg_send_buffer(): sending to: x.x.x.x:5061, force_socket=4, send_sock=0x7fc3ef70aab0 14(43) DEBUG: <core> [core/tcp_main.c:1741]: _tcpconn_find(): found connection by peer address (id: 9) 14(43) DEBUG: <core> [core/tcp_main.c:2627]: tcpconn_send_put(): tcp connection found (0x7fc3ebc65060), acquiring fd 14(43) DEBUG: <core> [core/tcp_main.c:2637]: tcpconn_send_put(): c=0x7fc3ebc65060, n=16 23(52) DEBUG: <core> [core/tcp_main.c:3982]: handle_ser_child(): read response= 7fc3ebc65060, 2, fd -1 from 14 (43) 14(43) DEBUG: <core> [core/tcp_main.c:2665]: tcpconn_send_put(): after receive_fd: c= 0x7fc3ebc65060 n=8 fd=20 14(43) DEBUG: <core> [core/tcp_main.c:2842]: tcpconn_do_send(): sending... 14(43) DEBUG: <core> [core/tcp_main.c:2878]: tcpconn_do_send(): after real write: c= 0x7fc3ebc65060 n=1372 fd=20 14(43) DEBUG: <core> [core/tcp_main.c:2879]: tcpconn_do_send(): buf= ......... 23(52) DEBUG: <core> [core/tcp_main.c:4671]: handle_tcpconn_ev(): sending to child, events 2001 23(52) DEBUG: <core> [core/tcp_main.c:4299]: send2child(): checking per-socket generic workers (48/19..-1828836960/21964) [tls:10.129.1.168:5061] 23(52) DEBUG: <core> [core/tcp_main.c:4326]: send2child(): WARNING: no free tcp receiver, connection passed to the least busy one (idx:0 busy:2) 23(52) DEBUG: <core> [core/tcp_main.c:4330]: send2child(): selected tcp worker idx:0 proc:19 pid:48 for activity on [tls:10.129.1.168:5061], 0x7fc3ebc65060 19(48) DEBUG: <core> [core/tcp_read.c:1782]: handle_io(): received n=8 con=0x7fc3ebc65060, fd=14 19(48) DEBUG: <core> [core/tcp_read.c:280]: tcp_read_data(): EOF on connection 0x7fc3ebc65060 (state: 0, flags: 118) - FD 14, bytes 0, rd-flags 10000 ([x.x.x.x]:5061 -> [x.x.x.x]:5061)19(48) DEBUG: <core> [core/tcp_read.c:1544]: tcp_read_req(): EOF 19(48) DEBUG: <core> [core/tcp_read.c:1702]: release_tcpconn(): releasing con 0x7fc3ebc65060, state -1, fd=14, id=9 ([x.x.x.x]:5061 -> [x.x.x.x]:5061) 19(48) DEBUG: <core> [core/tcp_read.c:1705]: release_tcpconn(): extra_data 0x7fc3ebc305b0 23(52) DEBUG: <core> [core/tcp_main.c:3744]: handle_tcp_child(): reader response= 7fc3ebc65060, -1 from 0 23(52) DEBUG: <core> [core/tcp_main.c:3668]: tcp_emit_closed_event(): TCP closed event creation triggered (reason: 0) 23(52) DEBUG: <core> [core/tcp_main.c:3676]: tcp_emit_closed_event(): no callback registering for handling TCP closed event 23(52) DEBUG: tls [tls_server.c:732]: tls_h_tcpconn_close_f(): Closing SSL connection 0x7fc3ebc305b0

1 0

412 issue
by satyaprakash ch 08 Feb '24

08 Feb '24

Hi, Does the below link issue is improved in updated version of Kamailio, Or kindly anyone help on this 412 issue? Link - https://github.com/kamailio/kamailio/issues/2048 Thanks.

1 0

Get the amount of open TCP connection from routing logic
by Sebastian Damm 06 Feb '24

06 Feb '24

Hello, My plan is to reject new inbound requests if there is already a certain number of open connections on one Kamailio server. I could answer with a 503 and directly close the connection forcing the client to reconnect and the loadbalancer to send traffic to a different node on the next connect. It's just a last-resort measure to prevent Kamailio from running into the configured TCP connection limit (workarounding a poorly-implemented external load balancer). Since I didn't find anything in the docs: Is there a pseudovariable containing the current number of open tcp/tls connections on this Kamailio? I can (and already do) query them via kamcmd or rpc, but can I access the variable from inside the routing script as well? Regards, Sebastian

3 6

Development for v5.8.x is frozen
by Daniel-Constantin Mierla 02 Feb '24

02 Feb '24

Hello, the formal notification that the development for the next major version 5.8.0 is now frozen. The focus has to be on testing the master branch. Also, the master branch should not get commits with new features till the branch 5.8 is created, expected to happen in 2-4 weeks, a matter of how testing goes on. Meanwhile, the commits with new features in the C code can be pushed to personal branches, new pull requests can still be done, but they will be merged after branching 5.8. Can still be done commits with documentation improvements, enhancements to related tools (e.g., kamctl, kamcmd), merging exiting pull requests at this moment, exporting missing KEMI functions and completing the functionality of the new modules added for 5.8. Once the branch 5.8 is created, new features can be pushed again to master branch as usual. From that moment, the v5.8.0 should be out very soon, time used for further testing but also preparing the release of packages. If someone is not sure if a commit brings a new feature, just make a pull request and it can be discussed there on github portal or via sr-dev mailing list. A summary of what is new in upcoming 5.8 is going to be built at: * https://www.kamailio.org/wikidocs/features/new-in-5.8.x/ Upgrade guidelines will be collected at: * https://www.kamailio.org/wikidocs/install/upgrade/5.7.x-to-5.8.0/ Everyone is more than welcome to contribute to the above wiki pages, especially to the upgrade guidelines, to help everyone else during the migration process from v5.7.x to 5.8.x. Cheers, Daniel -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy, Training and Development Services -- asipto.com Kamailio Advanced Training, February 20-22, 2024 -- asipto.com Kamailio World Conference, April 18-19, 2024, Berlin -- kamailioworld.com

1 0

MS Teams Kamailio SBC tcp timeouts
by maps＠ua.pt 01 Feb '24

01 Feb '24

Hello everyone. I have setup Kamailio as an SBC for Microsoft Teams following the link provided in the documentation https://skalatan.de/en/blog/kamailio-sbc-teams and everything was working perfectly until recently. The problem I am having is that starting a few weeks back, Kamailio starting showing the errors below. These errors appear without the need to do anything, meaning without making any sort of call, even with Kamailio sitting idle. Since the problem started I looked around and found out that the issue seems to come from the fact that sometimes the SIP Options request being sent to microsoft is not being answered. I have configured everything following the guide and I did not make any changes to Kamailio since then that might have caused this issue. I am using kamailio with docker, version 5.7.2-bullseye. Thank you very much. 31(37) ERROR: <core> [core/tcp_main.c:4675]: tcpconn_main_timeout(): connect 52.114.76.76:5061 failed (timeout) 9(15) ERROR: <core> [core/tcp_main.c:1321]: tcp_do_connect(): connect 52.114.76.76:5061 failed Cannot assign requested address 9(15) ERROR: <core> [core/tcp_main.c:1324]: tcp_do_connect(): connect 52.114.76.76:5061: (99) Cannot assign requested address 9(15) ERROR: <core> [core/tcp_main.c:1456]: tcpconn_finish_connect(): 52.114.76.76:5061: tcp_do_connect for 0x7f623d0e91a8 failed 9(15) ERROR: <core> [core/tcp_main.c:2112]: tcp_send(): 52.114.76.76:5061: tcpconn_finish_connect(0x7f623d0e91a8) failed 9(15) ERROR: tm [../../core/forward.h:292]: msg_send_buffer(): tcp_send failed 9(15) ERROR: tm [uac.c:688]: send_prepared_request_impl(): Attempt to send to precreated request failed

1 0

Freezing development for 5.8.x series
by Daniel-Constantin Mierla 01 Feb '24

01 Feb '24

Hello, I propose to aim freezing the development for 5.8.x series at the end of the 1st of February 2024 (Thursday). New features that one wants to get in this release series have to be pushed to git repository or pull requests made for them. Afterwards usually follows a 4-6 weeks of testing till the first release 5.8.0. Unfreezing will happen earlier, after the first weeks of testing when the 5.8 branch will be created. Cheers, Daniel -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy, Training and Development Services -- asipto.com Kamailio Advanced Training, February 20-22, 2024 -- asipto.com Kamailio World Conference, April 18-19, 2024, Berlin -- kamailioworld.com

1 1

print_dset(): no r-uri or branches
by Ali Taher 01 Feb '24

01 Feb '24

Hello all, I'm using Kamailio as SIP redirect where I'm appending the contact header then send reply back using sl_send_reply("300","Multiple Choices"). But I'm getting "print_dset(): no r-uri or branches" as warning in the log and no packet is sent back from Kamailio to the original sender. I'm using same Kamailio configuration in another setup and it's working correctly without facing this error. I'm not able to detect the issue. Can you please assist? Regards,

3 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users