- sr-users - kamailio.org

[OpenSER-Users] Radius integration issue
by Dan-Cristian Bogos 18 Jul '07

18 Jul '07

Hi, try running FreeRADIUS in debug mode, this will tell u more info regarding the cause of failure. To run FreeRADIUS in debug start it with -X option. Let us know about the results. Cheers, DanB On 7/18/07, OpenSER ML <openser(a)zap2link.com> wrote: > Hi All, > > I'm trying to connect OpenSER with FreeRadius. I've managed to get the digest authentication > going correctly, having the Radius respond with LOGIN OK for the requests that are in the users file. However, although the authentication process appears to succeed, the IP phone doesn't register to the OpenSER server. > > The following can be seen in the debug: > > 0(17821) SIP Request: > 0(17821) method: <REGISTER> > 0(17821) uri: <sip:192.168.2.80> > 0(17821) version: <SIP/2.0> > 0(17821) parse_headers: flags=2 > 0(17821) Found param type 232, <branch> = <z9hG4bK4d7202f23b6595fc>; state=16 > 0(17821) end of header reached, state=5 > 0(17821) parse_headers: Via found, flags=2 > 0(17821) parse_headers: this is the first via > 0(17821) After parse_msg... > 0(17821) preparing to run routing scripts... > 0(17821) parse_headers: flags=100 > 0(17821) DEBUG:parse_to:end of header reached, state=10 > 0(17821) DBUG:parse_to: display={}, ruri={sip:101@192.168.2.80;user=phone} > 0(17821) DEBUG: get_hdr_field: <To> [35]; uri=[sip:101@192.168.2.80;user=phone] > 0(17821) DEBUG: to body [<sip:101@192.168.2.80;user=phone> > ] > 0(17821) get_hdr_field: cseq <CSeq>: <20048> <REGISTER> > 0(17821) DEBUG:maxfwd:is_maxfwd_present: value = 70 > 0(17821) parse_headers: flags=200 > 0(17821) DEBUG: get_hdr_body : content_length=0 > 0(17821) found end of header > 0(17821) find_first_route: No Route headers found > 0(17821) loose_route: There is no Route HF > 0(17821) grep_sock_info - checking if host==us: 12==12 && [192.168.2.80] == [192.168.2.80] > 0(17821) grep_sock_info - checking if port 5060 matches port 5060 > 0(17821) grep_sock_info - checking if host==us: 12==12 && [192.168.2.80] == [192.168.2.80] > 0(17821) grep_sock_info - checking if port 5060 matches port 5060 > 0(17821) check_nonce(): comparing [469aba5f4ff6b78f7b9588ad19fc0ab514e709da] and [469aba5f4ff6b78f7b9588ad19fc0ab514e709da] > 0(17821) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed > 0(17821) build_auth_hf(): 'WWW-Authenticate: Digest realm="openser.org", nonce="469aba5f4ff6b78f7b9588ad19fc0ab514e709da", qop="auth" > ' > 0(17821) parse_headers: flags=ffffffffffffffff > 0(17821) check_via_address(192.168.2.101, 192.168.2.101, 0) > 0(17821) DEBUG:destroy_avp_list: destroying list (nil) > 0(17821) receive_msg: cleaning up > > As you can surely see, the ERROR is somewhere in the authorization status. Now, I've verified > the secret key between the machine, and all seems to be in place - any pointers will be highly appreciated. > > Z2L > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >

1 0

[OpenSER-Users] Radius integration issue
by OpenSER ML 18 Jul '07

18 Jul '07

Hi All, I'm trying to connect OpenSER with FreeRadius. I've managed to get the digest authentication going correctly, having the Radius respond with LOGIN OK for the requests that are in the users file. However, although the authentication process appears to succeed, the IP phone doesn't register to the OpenSER server. The following can be seen in the debug: 0(17821) SIP Request: 0(17821) method: <REGISTER> 0(17821) uri: <sip:192.168.2.80> 0(17821) version: <SIP/2.0> 0(17821) parse_headers: flags=2 0(17821) Found param type 232, <branch> = <z9hG4bK4d7202f23b6595fc>; state=16 0(17821) end of header reached, state=5 0(17821) parse_headers: Via found, flags=2 0(17821) parse_headers: this is the first via 0(17821) After parse_msg... 0(17821) preparing to run routing scripts... 0(17821) parse_headers: flags=100 0(17821) DEBUG:parse_to:end of header reached, state=10 0(17821) DBUG:parse_to: display={}, ruri={sip:101@192.168.2.80;user=phone} 0(17821) DEBUG: get_hdr_field: <To> [35]; uri=[sip:101@192.168.2.80;user=phone] 0(17821) DEBUG: to body [<sip:101@192.168.2.80;user=phone> ] 0(17821) get_hdr_field: cseq <CSeq>: <20048> <REGISTER> 0(17821) DEBUG:maxfwd:is_maxfwd_present: value = 70 0(17821) parse_headers: flags=200 0(17821) DEBUG: get_hdr_body : content_length=0 0(17821) found end of header 0(17821) find_first_route: No Route headers found 0(17821) loose_route: There is no Route HF 0(17821) grep_sock_info - checking if host==us: 12==12 && [192.168.2.80] == [192.168.2.80] 0(17821) grep_sock_info - checking if port 5060 matches port 5060 0(17821) grep_sock_info - checking if host==us: 12==12 && [192.168.2.80] == [192.168.2.80] 0(17821) grep_sock_info - checking if port 5060 matches port 5060 0(17821) check_nonce(): comparing [469aba5f4ff6b78f7b9588ad19fc0ab514e709da] and [469aba5f4ff6b78f7b9588ad19fc0ab514e709da] 0(17821) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed 0(17821) build_auth_hf(): 'WWW-Authenticate: Digest realm="openser.org", nonce="469aba5f4ff6b78f7b9588ad19fc0ab514e709da", qop="auth" ' 0(17821) parse_headers: flags=ffffffffffffffff 0(17821) check_via_address(192.168.2.101, 192.168.2.101, 0) 0(17821) DEBUG:destroy_avp_list: destroying list (nil) 0(17821) receive_msg: cleaning up As you can surely see, the ERROR is somewhere in the authorization status. Now, I've verified the secret key between the machine, and all seems to be in place - any pointers will be highly appreciated. Z2L

1 0

Re: [OpenSER-Users] OpenSER + OPTIONS module
by Iñaki Baz Castillo 18 Jul '07

18 Jul '07

El Monday 16 July 2007 18:30:20 Marc LEURENT escribió: > I'm using the following config but it's still not working with openwengo > and sjphone... Strange > Any idea??? > > if (uri==myself) { > if (method==OPTIONS){ > if (uri=~"sip:ping[@]+.*") { > rewriteuri("sip:sip.test.fr"); > xlog("URI after rewriteuri() = $ru \r\n"); > }; > if (! uri=~"sip:.*[@]+.*") { Add here: xlog("URI again = $ru \r\n"); > options_reply(); > }; > }; > }; -- Iñaki Baz Castillo ibc(a)in.ilimit.es

2 1

Re: [OpenSER-Users] OpenSer and FreeRadius implementation
by OpenSer ML 18 Jul '07

18 Jul '07

Please give me a bit more credit than that, I had been using Linux for the past 10 years ;-) Although, from my previous questions, one can easily assume I'm a linux newbie :-D Z2L ----- Original Message ----- From: "raviprakash sunkara" <sunkara.raviprakash.feb14(a)gmail.com> To: openser(a)zap2link.com Sent: Wednesday, July 18, 2007 10:59:06 AM (GMT+0200) Asia/Jerusalem Subject: Re: [OpenSER-Users] OpenSer and FreeRadius implementation hi oops this versio is working fine did u try ldconfig v , to load the library files On 7/18/07 , OpenSer ML < openser(a)zap2link.com > wrote: Hi Neeraj, Can you please specify the versions of OpenSER and FreeRadius you are using? I'm trying to use OpenSER 1.2.1 and FreeRadius 1.1.6 Regards, Z2L ----- Original Message ----- From: "Neeraj Gupta" < Neeraj.Gupta(a)Sun.COM > To: openser(a)zap2link.com Cc: "users" < users(a)openser.org > Sent: Wednesday, July 18, 2007 1:20:11 AM (GMT+0200) Asia/Jerusalem Subject: Re: [OpenSER-Users] OpenSer and FreeRadius implementation Ok, I will paste critical configs in email. You need to setup radius as usual and copy dictionary files as usual. /etc/openser.cfg: # # $Id$ # # radius config script # # ----------- global configuration parameters ------------------------ debug=0 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 listen=udp:yy.yy.yy.yy listen=udp:xx.xx.xx.xx alias= sfbay.sun.com avp_aliases="day=i:101;time=i:102" #fifo="/tmp/openser_fifo" # ------------------ module loading ---------------------------------- #mpath="/usr/local/openser-1.0.1/lib/openser/modules" mpath="/usr/local/lib64/openser/modules" #loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "avpops.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "xlog.so" loadmodule "uri.so" loadmodule " acc.so" loadmodule "auth.so" loadmodule "auth_radius.so" loadmodule "group_radius.so" loadmodule "avp_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc","db_url","mysql://openser:openserrw@localhost/openser") # neeraj changed to 0 from 2 modparam("usrloc", "db_mode", 0) # -- acc params -- modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 2) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 1) modparam("acc", "service_type", 15) modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") modparam("acc|auth_radius|group_radius|avp_radius", "radius_config", "/etc/radiusclient-ng/radiusclient.conf") # -- group_radius params -- modparam("group_radius", "use_domain", 1) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); }; # check if user is suspended ###if(is_method("REGISTER|INVITE|MESSAGE|OPTIONS|SUBSCRIBE")) { ### if (radius_is_user_in("From", "suspended")) { ### sl_send_reply("403", "Forbidden - suspended"); ### exit; ### }; ###}; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); if(is_method("BYE")) { # log it all the time acc_rad_request("200 ok"); acc_log_request("200 ok"); } route(1); }; if(is_method("INVITE") && !has_totag()) { # set the acc flags setflag(1); setflag(2); }; if (!uri==myself) { # check if user is allowed to do voip calls to other domains if(is_method("INVITE|MESSAGE")) { if (!radius_is_user_in("From", "voip")) { sl_send_reply("403", "Forbidden VoIP"); exit; }; }; # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { # authenticate registers if (method=="REGISTER") { if (!radius_www_authorize("")) { www_challenge("", "1"); exit; }; # check the src ip address # no need to use this now. tested OK ###if(!avp_check("$avp(i:2)", "eq/$src_ip/ig")) { ### sl_send_reply("403", "Forbidden IP"); ### exit; ###}; save("location"); exit; }; # calls to pstn if(uri=~"sip:00[1-9][0-9]+@") { if(is_method("INVITE") && !has_totag()) { if (!radius_is_user_in("From", "pstn")) { sl_send_reply("403", "Forbidden PSTN"); exit; }; }; # set gateway address rewritehostport(" 10.10.10.10:5090 "); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # log to acc as missed call acc_rad_request("404 Not Found"); acc_log_request("404 Not Found"); sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } # generic forward route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } /etc/radiusclient-ng/servers: xx.xx.xx.xx test1234 yy.yy.yy.yy test1234 /etc/radiusclient-ng/radiusclient.conf: <snip> # neeraj authserver xx.xx.xx.xx:1812 # RADIUS server to use for accouting requests. All that I # said for authserver applies, too. # # neeraj #acctserver localhost acctserver xx.xx.xx.xx :1813 <snip> Neeraj Gupta wrote: Yes. I have this working.. all with latest pieces of software on Sun SPARC Solaris 10. What exactly do you need ? -Neeraj OpenSER ML wrote: Hi All, Ok, I'm a bit mixed up here, the documents are simply not cutting it. I'm wondering if any of you have a working OpenSER + FreeRadius configuration that I can look at and extrapulate my required settings? I've gone over all the material I could find, but all of it reverts back to the outdated how-to on the FreeRadius website. Assistance would be highly appreciated. Regards, Z2L _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users -- ------------------------------------------------------------- o Neeraj Gupta email: neeraj.gupta(a)sun.com o Netra Systems & Networking phone: +1(408) 276-7214 x71214 o Sun Microsystems, Inc. fax : +1(408) 276-4552 o 4120 Network Circle, USCA12-216, Santa Clara, CA 95054, USA ------------------------------------------------------------- _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users -- Thanks &Regards Ravi Prakash Sunkara

1 0

[OpenSER-Users] OpenSer and FreeRadius implementation
by OpenSER ML 18 Jul '07

18 Jul '07

Hi All, Ok, I'm a bit mixed up here, the documents are simply not cutting it. I'm wondering if any of you have a working OpenSER + FreeRadius configuration that I can look at and extrapulate my required settings? I've gone over all the material I could find, but all of it reverts back to the outdated how-to on the FreeRadius website. Assistance would be highly appreciated. Regards, Z2L

2 3

[OpenSER-Users] softswitch with openser
by Ashish Barot 18 Jul '07

18 Jul '07

Respected sir, can you pl. help me out. i need to know that, can we use open ser to build softswitch which had features like class 4. and yes, then is there any guideline for that. so i can move ahead in that direction./ pl. any little help will be appiciate. Thanks. Best Regards, Ashi.

2 1

[OpenSER-Users] RADIUS and Local database lookup on register
by liran tal 18 Jul '07

18 Jul '07

Hey everyone, I was wondering if it's possible to combine the two methods of lookup so that a user can authenticate to both radius and local database (on the one that he is defined). to authenticate via radius it is done in my register section like this: if (!radius_www_authorize("")) { www_challenge("","0"); exit; }; and so I was wondering if it's possible to do something like this: if ( (!www_authorize("","subscriber")) || (!radius_www_authorize("")) ) { www_challenge("","0"); exit; }; Thanks, Lir.

2 1

[OpenSER-Users] Slightly OT: Anyone used RLM_PERL on FreeRadius with OpenSER?
by openser＠zap2link.com 18 Jul '07

18 Jul '07

Hi All, I'm trying to get FreeRadius to work with rlm_radius, but it would appear that although my perl script is loaded - it won't authenticate with it. Anyone ever worked with this before? Regards, Zap2Link

2 1

[OpenSER-Users] OpenSER not sending User-Password to Radius Server
by OpenSer ML 17 Jul '07

17 Jul '07

Hi All, I seem to have run into a situation where OpenSER doesn't send the user-password to the Radius server, upon initiating the Register method. The following information is received at the radius end: rad_recv: Access-Request packet from host 192.168.2.80:48582, id=200, length=194 User-Name = "101(a)192.168.2.80" Digest-Attributes = 0x0a05313031 Digest-Attributes = 0x010e3139322e3136382e322e3830 Digest-Attributes = 0x022a34363961326338396334343963303038323664396265313331653431376334316333303763376134 Digest-Attributes = 0x04127369703a3139322e3136382e322e3830 Digest-Attributes = 0x030a5245474953544552 Digest-Response = "8a61cba1c0729fa70929a115c6ae7c31" Service-Type = Authenticate-Only X-Ascend-PW-Lifetime = 0x313031 NAS-Port = 5060 NAS-IP-Address = 192.168.2.80 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 75 perl_pool: item 0x98baa10 asigned new request. Handled so far: 3 found interpetator at address 0x98baa10 rlm_perl: RAD_REQUEST: X-Ascend-PW-Lifetime = 0x313031 rlm_perl: RAD_REQUEST: Digest-Response = 8a61cba1c0729fa70929a115c6ae7c31 rlm_perl: RAD_REQUEST: User-Name = 101(a)192.168.2.80 rlm_perl: RAD_REQUEST: Service-Type = Authenticate-Only rlm_perl: RAD_REQUEST: NAS-IP-Address = 192.168.2.80 rlm_perl: RAD_REQUEST: NAS-Port = 5060 rlm_perl: RAD_REQUEST: Digest-Attributes = ARRAY(0x99f368c) perl_pool total/active/spare [32/0/32] This clearly shows that the User-Password attribute is not sent. Anyone can point me at the direction to look? z2l

2 1

[OpenSER-Users] parameter <fr_inv_timer> not found in module <lcr>
by adrien plessis 17 Jul '07

17 Jul '07

Hi It's my first message and i am not accustomed. I have install OpenSER 1.2.1 last month but i have bug because i use a t_relay with a renegociation of codec. I have install OpenSER 1.3.1 but i have one error when i lunch openser, i have error: 0(24405) set_mod_param_regex: parameter <fr_inv_timer> not found in module <lcr> 0(24405) parse error (49,19-20): Can't set module parameter I have not modify my config file i dont understand. please if you have already see My openser.cfg: #### #### ----------- global configuration parameters ------------------------ debug=4 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes# (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=xx.xxx.xxx.xx port=5060 children=4 # fifo="/tmp/ser_fifo" ####----------------------------------------------------------------------- #### #### #### ------------------ module loading ---------------------------------- loadmodule "/usr/lib/openser/modules/mysql.so" loadmodule "/usr/lib/openser/modules/nathelper.so" loadmodule "/usr/lib/openser/modules/sl.so" loadmodule "/usr/lib/openser/modules/tm.so" loadmodule "/usr/lib/openser/modules/rr.so" loadmodule "/usr/lib/openser/modules/maxfwd.so" loadmodule "/usr/lib/openser/modules/lcr.so" loadmodule "/usr/lib/openser/modules/acc.so" loadmodule "/usr/lib/openser/modules/usrloc.so" loadmodule "/usr/lib/openser/modules/registrar.so" ####------------------------------------------------------------------------ #### #### #### ----------------- setting module-specific parameters --------------- #modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") ########################### Least Cost routing ############################# modparam("lcr","db_url", "mysql://root:Gabriel0$@localhost/openser") modparam("lcr","gw_table","gw") modparam("lcr","gw_name_column","gw_name") modparam("lcr","ip_addr_column","ip_addr") modparam("lcr","port_column","port") #modparam("lcr","uri_scheme_column","uri_scheme") #modparam("lcr","transport_column","transport") modparam("lcr","grp_id_column","grp_id") modparam("lcr","lcr_table","lcr") modparam("lcr","prefix_column","prefix") modparam("lcr","from_uri_column","from_uri") modparam("lcr","priority_column","priority") #modparam("lcr","gw_uri_avp","1400") modparam("lcr","contact_avp","1401") modparam("lcr","fr_inv_timer_avp","fr_inv_timer_avp") #modparam("lcr","rpid_avp","rpid") modparam("lcr","fr_inv_timer",90) modparam("lcr","fr_inv_timer_next",30) ########################### RR shit ######################################### modparam("rr","enable_full_lr",1) ########################### ACC ############################################# modparam("acc","db_url", "mysql://root:Gabriel0$@localhost/openser") modparam("acc", "db_flag", 2) ############################ usrloc params ################################## modparam("usrloc", "db_url", "mysql://root:Gabriel0$@localhost/openser") modparam("usrloc", "db_mode", 3) ####------------------------------------------------------------------------- #### #### ####---------------------------- Routing ------------------------------------ route { ############################## Sanity checks ################################# if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); }; ########################## Record route for NAT ################################ if(!method=="REGISTER") { record_route(); }; ########################## Register ########################################### if (method=="REGISTER") { if (uri==myself) { sl_send_reply("100", "Trying"); if(!save("location")) { sl_reply_error(); }; exit; } else { sl_send_reply("403", "Forbidden"); exit; }; }; ############################# if(loose_route()) { route(1); }; ############################ Least Cost Routing ################################### if(!load_gws()) { sl_send_reply("500", "Internal server error, unable to load gateways"); } if(!next_gw()) { sl_send_reply("503", "Service not available, no gateways found"); }; ################################################################################### route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP setflag(2); if(method=="INVITE") { force_rtp_proxy(); t_on_reply("1"); }; if (!t_relay()) { sl_reply_error(); }; } onreply_route[1] { setflag(2); if (status=~"[12]0-90-9") { force_rtp_proxy(); }; } ####-------------------------------------------------------------------------------------------- #### I have this when i started openser : 0(24405) loading module /usr/local/lib/openser/modules/mysql.so 0(24405) loading module /usr/local/lib/openser/modules/nathelper.so 0(24405) loading module /usr/local/lib/openser/modules/sl.so 0(24405) loading module /usr/local/lib/openser/modules/tm.so 0(24405) DEBUG: register_pv: tm 0(24405) xl_add_extra_spec: extra items list is not initialized 0(24405) xl_add_extra_spec: inserting extra item [T_branch_idx] at [0] 0(24405) xl_add_extra_spec: inserting extra item [T_reply_code] at [1] 0(24405) loading module /usr/local/lib/openser/modules/rr.so 0(24405) loading module /usr/local/lib/openser/modules/maxfwd.so 0(24405) loading module /usr/local/lib/openser/modules/lcr.so 0(24405) loading module /usr/local/lib/openser/modules/acc.so 0(24405) loading module /usr/local/lib/openser/modules/usrloc.so 0(24405) loading module /usr/local/lib/openser/modules/registrar.so 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <db_url> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <gw_table> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <gw_name_column> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <ip_addr_column> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <port_column> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <uri_scheme_column> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <transport_column> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <grp_id_column> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <lcr_table> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <prefix_column> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <from_uri_column> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <priority_column> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <gw_uri_avp> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <contact_avp> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <fr_inv_timer_avp> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <rpid_avp> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: parameter <fr_inv_timer> not found in module <lcr> 0(24405) parse error (49,19-20): Can't set module parameter 0(24405) set_mod_param_regex: lcr matches module lcr 0(24405) set_mod_param_regex: found <fr_inv_timer_next> in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) set_mod_param_regex: rr matches module rr 0(24405) set_mod_param_regex: found <enable_full_lr> in module rr [/usr/local/lib/openser/modules/rr.so] 0(24405) set_mod_param_regex: acc matches module acc 0(24405) set_mod_param_regex: found <db_url> in module acc [/usr/local/lib/openser/modules/acc.so] 0(24405) set_mod_param_regex: acc matches module acc 0(24405) set_mod_param_regex: found <db_flag> in module acc [/usr/local/lib/openser/modules/acc.so] 0(24405) set_mod_param_regex: usrloc matches module usrloc 0(24405) set_mod_param_regex: found <db_url> in module usrloc [/usr/local/lib/openser/modules/usrloc.so] 0(24405) set_mod_param_regex: usrloc matches module usrloc 0(24405) set_mod_param_regex: found <db_mode> in module usrloc [/usr/local/lib/openser/modules/usrloc.so] 0(24405) find_cmd_export_t: found <mf_process_maxfwd_header>(1) in module maxfwd [/usr/local/lib/openser/modules/maxfwd.so] 0(24405) find_cmd_export_t: found <sl_send_reply>(2) in module sl [/usr/local/lib/openser/modules/sl.so] 0(24405) find_cmd_export_t: found <sl_send_reply>(2) in module sl [/usr/local/lib/openser/modules/sl.so] 0(24405) find_cmd_export_t: found <record_route>(0) in module rr [/usr/local/lib/openser/modules/rr.so] 0(24405) find_cmd_export_t: found <sl_send_reply>(2) in module sl [/usr/local/lib/openser/modules/sl.so] 0(24405) find_cmd_export_t: found <save>(1) in module registrar [/usr/local/lib/openser/modules/registrar.so] 0(24405) find_cmd_export_t: found <sl_reply_error>(0) in module sl [/usr/local/lib/openser/modules/sl.so] 0(24405) find_cmd_export_t: found <sl_send_reply>(2) in module sl [/usr/local/lib/openser/modules/sl.so] 0(24405) find_cmd_export_t: found <loose_route>(0) in module rr [/usr/local/lib/openser/modules/rr.so] 0(24405) find_cmd_export_t: found <load_gws>(0) in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) find_cmd_export_t: found <sl_send_reply>(2) in module sl [/usr/local/lib/openser/modules/sl.so] 0(24405) find_cmd_export_t: found <next_gw>(0) in module lcr [/usr/local/lib/openser/modules/lcr.so] 0(24405) find_cmd_export_t: found <sl_send_reply>(2) in module sl [/usr/local/lib/openser/modules/sl.so] 0(24405) find_cmd_export_t: found <force_rtp_proxy>(0) in module nathelper [/usr/local/lib/openser/modules/nathelper.so] 0(24405) find_cmd_export_t: found <t_on_reply>(1) in module tm [/usr/local/lib/openser/modules/tm.so] 0(24405) find_cmd_export_t: found <t_relay>(0) in module tm [/usr/local/lib/openser/modules/tm.so] 0(24405) find_cmd_export_t: found <sl_reply_error>(0) in module sl [/usr/local/lib/openser/modules/sl.so] 0(24405) find_cmd_export_t: found <force_rtp_proxy>(0) in module nathelper [/usr/local/lib/openser/modules/nathelper.so] ERROR: bad config file (1 errors) 0(24405) DEBUG: tm_shutdown : start 0(24405) DEBUG: tm_shutdown : emptying hash table 0(24405) DEBUG: tm_shutdown : releasing timers 0(24405) DEBUG: tm_shutdown : removing semaphores 0(24405) DEBUG: tm_shutdown : destroying tmcb lists 0(24405) DEBUG: tm_shutdown : done 0(24405) shm_mem_destroy

2 1

[OpenSER-Users] LCR
by Gerson Matiolli 17 Jul '07

17 Jul '07

I have 2500 lines in table LCR, but to openser recognizes only 255. How I can change this?

2 1

[Serusers] loose_route behaviour, detecting single Route with myself
by JF 17 Jul '07

17 Jul '07

Hi all, When SER receives an INVITE with a single Route header pointing to itself, it's supposed to delete it and process the message as if no Route header was there in the first place. This is what RFC3261 mandates, right? But currently the loose_route function returns true to the script in this case, just like when more Route headers are present. So I have some routing logic for when no Route headers are present, and if I want to apply the same routing logic to the case when there is a single Route header pointing to myself (naturally, as it's the same as if no Route header was present), I currently have to replicate the same routing logic inside the if (loose_route())... Or is there an other way? Do I have to develop my own module function or use some regexp search from the script to detect if there are more Routes besides myself before I call loose_route? The best would be to change loose_route to return false and just remove the Route header pointing to myself when there are no more Route headers in the message... what do you think? JF

12 59

[OpenSER-Users] media not accpetable with outgoing call on cisco
by laurent schweizer 17 Jul '07

17 Jul '07

Hello, I have a problem with a cisco GW, if i only set g711 ulaw or alow as codec in my ata the the GW return a media not acceptable error. but If i add the g729 codec the all is ok. I see in the config of the cisco where to define codec for imcoming call but not for outgoing *Jul 17 15:57:02.604: Received: INVITE sip:0041787518551@192.168.0.110 SIP/2.0 Via: SIP/2.0/UDP 192.168.0.107:5070;branch=z9hG4bK5f66.fc82e301.0 To: <sip:0041787518551@192.168.0.110> From: 021111111 <sip:021111111@peoplefone.ch >;tag=27B98752-469CEA8A0002F2E4-5F903B30 CSeq: 10 INVITE Call-ID: 1973211C-469CEA8A0002F2EA-5F903B30(a)212.203.123.82 Content-Length: 250 User-Agent: OpenSER (1.2.1-notls (i386/linux)) Contact: <sip:sems@192.168.0.107:5070> P-MsgFlags: 0 billingid: 106 accountid: 28928 Remote-Party-ID: <sip:0445532001@192.168.0.106 >;party=calling;id-type=subscriber;screen=yes Content-Type: application/sdp v=0 o=MxSIP 0 198 IN IP4 192.168.0.249 s=SIP Call c=IN IP4 200.200.100.106 t=0 0 m=audio 39318 RTP/AVP 8 0 101 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=sendrecv a=direction:active a=nortpproxy:yes *Jul 17 15:57:02.608: 0x64C01D00 : State change from (STATE_NONE, SUBSTATE_NONE) to (STATE_IDLE, SUBSTATE_NONE) *Jul 17 15:57:02.608: sipSPIStreamTypeAndDtmfRelay: ERROR - no voice codec and no dtmf-relay match *Jul 17 15:57:02.608: sipSPIDoAudioNegotiation: Media negotiation failed for m-line 1 *Jul 17 15:57:02.608: sipSPIDoMediaNegotiation: ERROR - no valid fax or audio streams *Jul 17 15:57:02.608: sipSPIHandleInviteMedia: Media Negotiation failed for an incoming call - Sending 488 *Jul 17 15:57:02.608: 0x64C01D00 : State change from (STATE_IDLE, SUBSTATE_NONE) to (STATE_DISCONNECTING, SUBSTATE_NONE) *Jul 17 15:57:02.608: Sent: SIP/2.0 488 Not Acceptable Media Via: SIP/2.0/UDP 192.168.0.107:5070;branch=z9hG4bK5f66.fc82e301.0 From: 021111111 <sip:021111111@peoplefone.ch >;tag=27B98752-469CEA8A0002F2E4-5F903B30 To: <sip:0041787518551@192.168.0.110>;tag=C0E57710-2347 Date: Tue, 17 Jul 2007 15:57:02 GMT Call-ID: 1973211C-469CEA8A0002F2EA-5F903B30(a)212.203.123.82 Server: Cisco-SIPGateway/IOS-12.x CSeq: 10 INVITE Allow-Events: telephone-event Content-Length: 0

2 1

[OpenSER-Users] imc module, any help?
by Iñaki Baz Castillo 17 Jul '07

17 Jul '07

Hi, I'm trying to configure the imc module for IM chat rooms and I get nothing. My conf related to this is: ------------------------------ modparam("imc", "db_url", "mysql://openser:openserrw@localhost/openser") if(method=="MESSAGE") { if (uri=~ "sip:chat1@") { imc_manager(); } } ------------------------------ Of course "chat1" doesn't exist in subscription o location table. So I open Linphone and send a message to "chat1(a)domain.org": #create test_room and I get in Linphone: "[<sip:test_room@openser.ilimit.es>] :*** room was created" And in fifo I see: ~$ openserctl fifo imc_list_rooms database engine 'MYSQL' loaded Control engine 'FIFO' loaded entering fifo_cmd imc_list_rooms 200 OK ROOM:: URI=sip:chat1@domain.org MEMBERS=0 OWNER=sip:810@domain.org But if I send a message to "test_room(a)domain.org" I get a 404 in OpenSer. And now, what more? I've tryed with #join chat1 but no members are added anywhere. So I'd appreciate a help with this since I don't find enough information about this module. PD: Why the MySQL tables imc_rooms and imc_members are always empty when "openserctl fifo imc_list_rooms" shows me the created rooms? Thanks a lot. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

2 2

Re: [Serusers] loose_route behaviour, detecting single Route with myself
by Jiri Kuthan 17 Jul '07

17 Jul '07

Not sure it is worth patching the code which is IMO working. If I understand it right, you are having tel URI in Route? However this might have happened, that seems little sensible to me. The point is that tel URI is used to decouple a PSTN destination from a possible path via IP netowrk, whereas Route is intended to lay down such a path. Putting these two things together appears of limited use value to me. Anyhow, would you mind sending a dump of the SIP request in question -- I'm a bit confused what situation we are actually solving. -jiri At 19:46 10/07/2007, JF wrote: >no comments? > >On 6/28/07, JF <jfkavaka(a)gmail.com> wrote: >> I would propose to simply apply this patch to modules/rr/loose.c: >> >> @@ -1069,8 +1069,8 @@ >> return -1; >> } >> >> - if (is_myself(&_m->parsed_uri.host, _m->parsed_uri.port_no) >> - || _m->parsed_uri.type==TEL_URI_T || >> _m->parsed_uri.type==TELS_URI_T) { >> + if (_m->parsed_uri.type==TEL_URI_T || _m->parsed_uri.type==TELS_URI_T || >> + is_myself(&_m->parsed_uri.host, >> _m->parsed_uri.port_no)) { >> DBG("loose_route: RURI is myself (or tel URI)\n"); >> if ((ret = is_myself(&puri.host, puri.port_no)) == 1 && >> !(enable_double_rr && is_2rr(&puri.params))) { >> >> >> JF >> >> On 6/22/07, Greger Viken Teigre <greger(a)teigre.com> wrote: >> > This seems like a corner case where the tel uri with no domain results in maybe a bit unfortunate return code from loose_route. >> > Comments anyone? >> > g-) >> > >> > >> > ------- Original message ------- >> > From: JF <jfkavaka(a)gmail.com> >> > Cc: serusers(a)iptel.org, openimscore-cscf(a)lists.berlios.de >> > Sent: 22.6.'07, 11:11 >> > >> > > Thanks Greger, >> > > >> > > The problem is related to the fact that the Req-URI is a tel-URI. >> > > I had to work around it in the script by not letting loose_route get >> > > called when the URI is a tel URI. >> > > >> > > In loose.c, loose_route() says (by looking at the log): >> > > DBG("loose_route: RURI is NOT myself\n"); >> > > because Req-URI doesn't have a host part. >> > > >> > > Then after_loose(_m, &puri, 1, 0) is called because the single >> > > existing Route header has our SIP URI. >> > > And then: >> > > DBG("after_loose: Topmost route URI: '%.*s' is me\n", uri->len, ZSW(uri->s)); >> > > and >> > > DBG("after_loose: No next URI found\n"); >> > > An since _ruri_myself == 0, return RR_DRIVEN; >> > > >> > > IMO the fact that the Req-URI is a tel URI shouldn't make loose_route >> > > return true in this case... >> > > >> > > JF >> > > >> > > >> > > On 6/21/07, Greger V. Teigre <greger(a)teigre.com> wrote: >> > > > If there's a single Route header pointing to itself, then this is a good >> > > > indication that a UA added a Route to your proxy as an outbound proxy. >> > > > If SER correctly identities the uri as itself, it should AFAIK return false. >> > > > Could you please turn on debugging and then look for loose_route and >> > > > after_loose debug messages in the logs and post them? >> > > > g-) >> > > > >> > > > JF wrote: >> > > > > Hi all, >> > > > > >> > > > > When SER receives an INVITE with a single Route header pointing to >> > > > > itself, it's supposed to delete it and process the message as if no >> > > > > Route header was there in the first place. This is what RFC3261 >> > > > > mandates, right? >> > > > > >> > > > > But currently the loose_route function returns true to the script in >> > > > > this case, just like when more Route headers are present. >> > > > > >> > > > > So I have some routing logic for when no Route headers are present, >> > > > > and if I want to apply the same routing logic to the case when there >> > > > > is a single Route header pointing to myself (naturally, as it's the >> > > > > same as if no Route header was present), I currently have to replicate >> > > > > the same routing logic inside the if (loose_route())... >> > > > > >> > > > > Or is there an other way? Do I have to develop my own module function >> > > > > or use some regexp search from the script to detect if there are more >> > > > > Routes besides myself before I call loose_route? >> > > > > >> > > > > The best would be to change loose_route to return false and just >> > > > > remove the Route header pointing to myself when there are no more >> > > > > Route headers in the message... what do you think? >> > > > > >> > > > > JF >> > > > > _______________________________________________ >> > > > > Serusers mailing list >> > > > > Serusers(a)lists.iptel.org >> > > > > http://lists.iptel.org/mailman/listinfo/serusers >> > > > > >> > > > > >> > > > > >> > > > >> > > _______________________________________________ >> > > Serusers mailing list >> > > Serusers(a)lists.iptel.org >> > > http://lists.iptel.org/mailman/listinfo/serusers >> > >> > >> >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

2 1

[OpenSER-Users] short remainder: IRC OpenSER meeting today 13:00 GMT
by Henning Westerholt 17 Jul '07

17 Jul '07

Hello all, just a short remainder about the IRC OpenSER development meeting today at 13:00 GMT in the #openser channel on freenode.net. Information about this meeting: http://openser.org/dokuwiki/doku.php/development:irc-meeting-agenda-17-07-2… Please join us! -- Henning Westerholt - Unix system development 1&1 Internet AG, Brauerstraße 48, 76135 Karlsruhe, Germany

1 0

[OpenSER-Users] Request for comment : logging in OpenSER
by Bogdan-Andrei Iancu 17 Jul '07

17 Jul '07

Hi everybody, There is some undergoing work on the logging system in OpenSER and I feel that some issues should be publicly addressed before moving forward. What we have now in openser: 1) two logging systems - syslog and standard error 2) message format - totally chaos. What we want to fix: 1) a better way to make easy distinction between the logs from different levels (ERR, WARN, DBG, etc) 2) a standard message format that, independend of the logging support (syslog, stderr), will provide all the needed information (level and date at least). Here is my suggestion: 1) logging and message format: There will be different macros for each log level and the message should include the module_name and function for a better tracking of the messages: LOG_NOTICE("module_name:function: message") LOG_DBG("module_name:function: message") LOG_ERR("module_name:function: message") ...... 2) logging backends: a) syslog syslog automatically logs the date, process and from syslog.conf, you can redirect the log in different files based on the log level, so here there is nothing to be changed. b) stderr we need to extend dprint() (logger function for stderr) to prefix to the log message the date and log level (as text). This will provide similar possibilities as for syslog. (a patch is already available for this on the tracker) If there are some comments on the proposed solution or there is a better approach, please let me know as I want to move on with this topic. Regards, Bogdan

5 6

[Serusers] need help!
by Mukesh Prajapati 17 Jul '07

17 Jul '07

Hi I read the Ser Getting started pdf. can anybody tell me what would be the structure of My Sql database used in "Hello world scenario with my sql authentication" thnks mukesh --------------------------------- Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.

2 1

[OpenSER-Users] OpenSER + FreeRadius issue
by openser＠zap2link.com 16 Jul '07

16 Jul '07

Hi All, Well, after a bit of a struggle with the example document on the website, which is highly outdated, I've managed to have OpenSER send Radius requests to my FreeRadius Server. Now, I'm getting rejected by the radius server, with the following error messages: Sun Jul 15 05:02:02 2007 : Auth: rlm_digest: Configuration item "User-Password" or Digest-HA1 is required for authentication. Sun Jul 15 05:02:02 2007 : Auth: Login incorrect: [101(a)192.168.2.80/<no User-Password attribute>] (from client openser port 5060) Sun Jul 15 05:02:12 2007 : Auth: Login incorrect: [101(a)192.168.2.80/<no User-Password attribute>] (from client openser port 0) Sun Jul 15 05:02:22 2007 : Auth: rlm_digest: Configuration item "User-Password" or Digest-HA1 is required for authentication. Sun Jul 15 05:02:22 2007 : Auth: Login incorrect: [101(a)192.168.2.80/<no User-Password attribute>] (from client openser port 5060) Sun Jul 15 05:02:31 2007 : Auth: Login incorrect: [103(a)192.168.2.80/<no User-Password attribute>] (from client openser port 0) Assistance would be appreciated. Following below is my OpenSER and FreeRadius configurations: http://pastebin.com/f41e8204a Regards, openser(a)zap2link.com

1 0

[Serusers] [serusers] sip trunk between a cisco callmanager
by julia heller 16 Jul '07

16 Jul '07

Hi, does anybody know, how i can make a sip trunk between a cisco callmanager 5.0 and a sip express router (0.9.6)? kind regards julia -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

2 2

[OpenSER-Users] OpenSER + OPTIONS module
by Marc LEURENT 16 Jul '07

16 Jul '07

Hello Does anyone succeed in having openwengo SIP pings working with openser I've added the options module and the fonction below but openser isn't answering. loadmodule "options.so" ...... if (uri==myself) { if ((method==OPTIONS) || ( uri=~"sip:ping[@]+.*")) { options_reply(); }; }; Thanks Marc Session Initiation Protocol Status-Line: SIP/2.0 404 Not Found Status-Code: 404 [Resent Packet: False] Message Header Via: SIP/2.0/UDP 192.168.95.109:5060;rport=5060;branch=z9hG4bK1170921213 From: sip.wifirst.fr <sip:test@192.168.95.248>;tag=62904156 To: <sip:ping@192.168.95.248>;tag=e9b225e6b81dc6124ee6640a10a59bf1.f647 Call-ID: 668195568(a)192.168.95.109 CSeq: 20 OPTIONS Sequence Number: 20 Method: OPTIONS Server: OpenSER (1.2.1-notls (i386/linux)) Content-Length: 0

3 2

[OpenSER-Users] <db_url> not found in module <pua_usrloc>
by Iñaki Baz Castillo 16 Jul '07

16 Jul '07

Hi, I'm trying to enabe the module pua_usrloc in OpenSer 1.2.1 but I can't since I get an error: set_mod_param_regex: parameter <db_url> not found in module <pua_usrloc> Of course, I have loaded the modules: loadmodule "pua.so" loadmodule "pua_usrloc.so" I see no "db_url" parameter for pua_usrloc module in the doc: http://www.openser.org/docs/modules/1.2.x/pua_usrloc.html but I do see it in the pua module, so I set: modparam("pua", "db_url", "mysql://openser:openserrw@localhost/openser") but I get the same error: <db_url> not found in module <pua_usrloc> So I've tryed to add: modparam("pua_usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") with exactly same problem. Any idea of what I'm doing wrong? anybody using pua_usrloc module succesfully? Regards. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

2 2

[Serusers] How to use avps in subst
by Roger Lewau 16 Jul '07

16 Jul '07

Hello I am running version 0.9.6 and have a situation where I want to change the remote-party-id of a forwarded call so that when the call reach the destination the forwarding users number is avertised. It is necessary to change it becaus if I dont change this header the first number of the trunk is shown, which almost everytime is another customer than the forwarder. I have experimented with avpops and subst but can not get the avp part to translate into the value in the resulting string. This is the code I am using for unconditional forwarding if (avp_db_load("$ruri/username", "s:cfwd")) { setflag(22); revert_uri(); avp_write("$ruri/username","s:calledno"); subst('/^Remote-Party-ID:(.*)>(.*)$/Remote-Party-ID: "$avp(calledno)" <sip:$avp(calledno)>\2/i'); avp_delete("s:calledno"); avp_pushto("$ruri/username", "s:cfwd"); prefix("01"); #use interface 1 on Vegastream Gate route(5); route(4); break; }; The resulting header looks like this: Remote-Party-ID: "$avp(rpid)" <sip:$avp(rpid)>;party=calling;screen=no;privacy=off. Is it not possible to use avpops in subst? Any other idea on how to change the header in 0.9.6. Kind regards Roger Lewau

1 0

[Serusers] SER <> Asterisk in trunk context
by inge 16 Jul '07

16 Jul '07

Hi all, I find somes informations about using SER and Asterisk to do a SIP trunk. Indeed, the context is the follow : - One Asterisk with PABX functionnality wich provide some services - This Asterisk wants to make calls to PSTN without direct interco - Asterisk should be interconnect to a SER server In this context, what's the solutions to provide a trunk between Asterisk and SER for this context, and have accounting on SER ? Thanks for your indications and support. Sincerely, Adrien .L

1 1

[Serusers] endless authentication needed
by Benoit Pradelle 16 Jul '07

16 Jul '07

Hi all, I'm working on a SIP client, I'm implementing SIMPLE but during my tests I encounter a very strange behavior with the iptel.org server. When I send a SUBSCRIBE message with an Expires value of 0 I receive a 407 / Authentication needed, I handle the challenge correctly (I've checked, the response value is correct) but I receive a new 407 message with the same challenge ! It continues again and again and I'm never able to authenticate. What is the problem ? I can join a dump if needed. Cheers, Ben

5 6

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users