- sr-users - kamailio.org

[OpenSER-Users] IMPORTANT: openser.org server down, Monday, Oct 15, 04:30 CET
by Daniel-Constantin Mierla 11 Oct '07

11 Oct '07

Hello, due to infrastructure maintenance of the place where the current openser.org server is located, Monday Oct 15, 04:30am Central European Time, the services will be down for about 2 hours. That include everything hosted in the server: - web pages (including documentation and dokuwiki) - mailing lists - downloads Hope everything will go according to the schedule and the services will be back online as planned. Cheers, Daniel

1 0

Re: [Serusers] SER + Linksys SPA942 + Call transfer
by roayu 11 Oct '07

11 Oct '07

Hi Atle, Let me make my scenario clear on you. I have 2 softphone and 1 IP phone(SPA942). I would like to call from Softphone A to SPA942, then use SPA942 transfer the call to Softphone B. But, when I do so, the connection still remained on between SPA942 and Softphone B. I managed to get Softphone A onHold and the SPA942 managed to call to Softphone B. Once I press on the 'xfer' button after calling Softphone B, A still onHold and no SIP signal to unHold A and to terminate B. If I would like to configure the ser.cfg file, which part that I need to configure? And how do I do that? Thanks. Cheers, Roa Yu -----Original Message----- From: Atle Samuelsen [mailto:clona@cyberhouse.no] Sent: Thursday, October 11, 2007 3:19 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] SER + Linksys SPA942 + Call transfer Hi Roa,i * roayu <roayu(a)ctisys.net> [071011 04:01]: > Hi, there! > > I have some questions and help. > 1) I would like to know can call transfer being done when the > connection is P2P? When I tried to use relay (mediaproxy) to do the call > transfer, it's able to transfer the call to the other party whereas when the > condition is P2P, it just can't pass the correct signal. I'm proberbly only tierd (9:15 am here) but P2P? Can you provide the signalling and ser.cfg so we can understand what you are trying to establish? I personally think you are trying to do a call transfer from one ua to a other, where the original call went true mediaproxy, but you do not want the "new" transferd call to go true it. > > 2) Can SER support SPA942 ? Or is there some other settings that I need > to configure on SER ? SPA942, SPA962, SPA2102, yea.. all Linksys SPA products work like a charm with SER (Who has a 942 as his primary phone these days) Best Regards ATle > > Thanks. > > Cheers, > Roa Yu > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers

1 0

[OpenSER-Users] Questions about pike module
by Iñaki Baz Castillo 11 Oct '07

11 Oct '07

Hi, yesterday I tryed pike module: ------------------------------------------------------------------------------------------------------------ modparam("pike", "sampling_time_unit", 10) modparam("pike", "reqs_density_per_unit", 30) modparam("pike", "remove_latency", 130) route{ ### pike if (!pike_check_req()) { xlog("pike module has detected IP abuse. Terminating message.\n"); exit; }; # Sanity Check Section ... ... } ------------------------------------------------------------------------------------------------------------ I runned sipp and generate lot of messages from my laptop to my OpenSer server. After a while "pike_check_req()" returns FALSE and the message is terminated. Ok. But if during the sipp attack I do a call from my laptop softphone (same public IP then) most of the times the call is accepted, even if I see the xlog message (because sipp atack) and my IP is listed when doing: ~# openserctl fifo pike_list How is possible? And other question: what is exactly "remove_latency" parameter for? I read: "For how long the IP address will be kept in memory after the last request from that IP address. It's a sort of timeout value." - Is it seconds or miliseconds? - Does it mean the time that listed IP's will be "banned" (I mean the IP's appearing in "openserctl fifo pike_list")? I think is not this because I put: modparam("pike", "remove_latency", 9999999999999) and the IP dissapears of listed IP's after a few seconds (10 - 20). Thanks for any explanation. Regards. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

1 0

[OpenSER-Users] "exit;" instead of "break;" in pike module doc
by Iñaki Baz Castillo 11 Oct '07

11 Oct '07

Hi, in pike doc section 1.4.1 [*] there appears: Example 1-4. pike_check_req usage ... if (!pike_check_req()) { break; }; ... It should be "exit;", shouldn't it? [*] http://www.openser.org/docs/modules/devel/pike.html#AEN89 Regards. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

2 1

[Serusers] SER 2.0 - acc_syslog module report_ack and report_cancels parameters
by Tomasz Zieleniewski 11 Oct '07

11 Oct '07

Hi, Are the report_ack and report_cancels still supported in acc_syslog module? When I make modparam("acc_syslog", "report_ack", 1) I get that parameter was not found in the module. Cheers Tomasz

2 2

Re: [Serusers] new_t: out of mem
by Jiri Kuthan 11 Oct '07

11 Oct '07

It could be. i'ld suggest upgrading SER so that you don't hunt historical errors and then following memory-problem-reporting guidelines (a bit tedious but provides the so needed info about what's wrong). For that, SER needs to be run for a while so that the syslog shows execsively frequentlya allcated fragments which haven't been freed. -jiri At 09:41 11/10/2007, Zappasodi Daniele wrote: >Hello, >I need help to interpret the syslog. >I have a problem with memory, maybe there is memory leak: after few hours and few cps, my ser goes out of memory >Feb 8 17:27:29 SAM-IP ser[2193]: ERROR: sip_msg_cloner: cannot allocate memory >Feb 8 17:27:29 SAM-IP ser[2193]: ERROR: new_t: out of mem: >Feb 8 17:27:29 SAM-IP ser[2193]: ERROR: t_newtran: new_t failed >If I stop the test and I wait, ser doesn't release memory and it continues to refuse every call with "out of mem". > >I have attached the end of the syslog (ser recompiled with DBG_QM_MALLOC options). >I don't understand if the messages in this trace contain info about a memory leak, but if I stop ser immediately after the start without any call, I don't see great differences in the syslog. >I'm using ser 0.9.6. >What else can I do to search more info about memory leak? > >Thanks, >Zappasodi Daniele > >********************************************************************** >The information in this message is confidential and may be legally >privileged. It is intended solely for the addressee. Access to this message >by anyone else is unauthorized. If you are not the intended recipient, any >disclosure, copying, or distribution of the message, or any action or >omission taken by you in reliance on it, is prohibited and may be unlawful. >Please immediately contact the sender if you have received this message inerror. > >********************************************************************** > >_______________________________________________ >Serusers mailing list >Serusers@lists.iptel.orghttp://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[Serusers] new_t: out of mem
by Zappasodi Daniele 11 Oct '07

11 Oct '07

Hello, I need help to interpret the syslog. I have a problem with memory, maybe there is memory leak: after few hours and few cps, my ser goes out of memory Feb 8 17:27:29 SAM-IP ser[2193]: ERROR: sip_msg_cloner: cannot allocate memory Feb 8 17:27:29 SAM-IP ser[2193]: ERROR: new_t: out of mem: Feb 8 17:27:29 SAM-IP ser[2193]: ERROR: t_newtran: new_t failed If I stop the test and I wait, ser doesn't release memory and it continues to refuse every call with "out of mem". I have attached the end of the syslog (ser recompiled with DBG_QM_MALLOC options). I don't understand if the messages in this trace contain info about a memory leak, but if I stop ser immediately after the start without any call, I don't see great differences in the syslog. I'm using ser 0.9.6. What else can I do to search more info about memory leak? Thanks, Zappasodi Daniele ********************************************************************** The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message inerror. **********************************************************************

1 0

[Serusers] need help implementing sip callback
by Rogelio Serrano 11 Oct '07

11 Oct '07

any pointers? -- Lay low and nourish in obscurity

2 1

[Serusers] SER + Linksys SPA942 + Call transfer
by roayu 11 Oct '07

11 Oct '07

Hi, there! I have some questions and help. 1) I would like to know can call transfer being done when the connection is P2P? When I tried to use relay (mediaproxy) to do the call transfer, it's able to transfer the call to the other party whereas when the condition is P2P, it just can't pass the correct signal. 2) Can SER support SPA942 ? Or is there some other settings that I need to configure on SER ? Thanks. Cheers, Roa Yu

2 1

[OpenSER-Users] Set up two SIP to PSTN calls and then connect them
by CSB 11 Oct '07

11 Oct '07

I wish to set up two SIP to PSTN calls and then connect them similar to Jajah (is this called 3pcc?). The calls would be proxied by OpenSER and the PSTN interconnected handled by a third party provider with PSTN interconnect. To my knowledge, it's not possible to use OpenSER alone to do this. Options include WeSIP (beta software, restrictive licence) or Asterisk (poor implementation of "peer" identification limits usability). Could anyone advise what other alternatives there are? Is it possible to just use OpenSER? What about SEMS? Regards Cameron

1 0

[OpenSER-Users] Set up two SIP to PSTN calls and then connect them
by Cameron.Beattie 10 Oct '07

10 Oct '07

I wish to set up two SIP to PSTN calls and then connect them similar to Jajah (is this called 3pcc?). The calls would be proxied by OpenSER and the PSTN interconnected handled by a third party provider with PSTN interconnect. To my knowledge, it's not possible to use OpenSER alone to do this. Options include WeSIP (beta software, restrictive licence) or Asterisk (poor implementation of "peer" identification limits usability). Could anyone advise what other alternatives there are? Is it possible to just use OpenSER? What about SEMS? Regards Cameron

1 0

[OpenSER-Users] logging problem
by Klaus Darilion 10 Oct '07

10 Oct '07

Hi! I just compiled a fresh openser-1.2 (no installation - only "make all" and running it as non-privileged user from the source directory). Everything works fine except that I can not see L_DEBUG messages in syslog (debug=3 causes the same output in syslog as debug=4) and I'm stuck in finding the problem. When starting openser with -D -E -dd I see DEBUG messages too. thanks Klaus

2 5

AW: AW: [OpenSER-Users] MSILO: dump stored messages
by Cesar Troncoso 10 Oct '07

10 Oct '07

Hi Daniel, yes it works fine now, all messages are dumped in the order of receiving! Thanks for fixing it, now I just need to wait some time for openser 1.3 to be released ;-) Cheers, Cesar -----Ursprüngliche Nachricht----- Von: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Gesendet: Donnerstag, 04. Oktober 2007 16:56 An: Cesar Troncoso Cc: users(a)openser.org Betreff: Re: AW: [OpenSER-Users] MSILO: dump stored messages Hello, can you test with latest trunk version. I added a constraint to order by auto incremented index. Let me know if works ok. Cheers, Daniel On 10/04/07 15:11, Cesar Troncoso wrote: > Hi, > > thanks for reply my email. I made the following test: I sent five different messages: > > one > two > three > four > five > > and I traced the SIP traffic passing through the server. They were stored in the DB in the correct sequence. So far so good. Now comes the problem, I saw the IM going out from my SIP Server and the sequence was wrong: > > three > five > two > four > one > > And exactly in that way appeared the IM in my client when the user went online. > > In my opinion the IM were not properly sent when they went out from OpenSER > > Cheers, > > Cesar > > -----Ursprüngliche Nachricht----- > Von: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] > Gesendet: Donnerstag, 04. Oktober 2007 13:28 > An: Cesar Troncoso > Cc: users(a)openser.org > Betreff: Re: [OpenSER-Users] MSILO: dump stored messages > > Hello, > > they should be sent in order of receiving -- however I will double > check. Because they are sent in a very short time frame, maybe the get > in a different order to the user, because of network transmission. Can > you watch the sip traffic sent by proxy? > > Cheers, > Daniel > > > On 10/04/07 13:39, Cesar Troncoso wrote: > >> Hello, >> >> >> >> I have a problem by using the MSILO Module. The messages stored in the >> DB (table SILO) are not sent in the right sequence. Therefore when the >> user goes online again and receives the messages previously stored in >> the DB, he is not able to understand them. Any Ideas or suggestions >> how to deal this problem? >> >> >> >> Thanks, >> >> >> >> Cesar >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Users mailing list >> Users(a)openser.org >> http://openser.org/cgi-bin/mailman/listinfo/users >> >> > >

1 0

Re: [Serusers] Get RealTime Online Users status
by roayu 10 Oct '07

10 Oct '07

Oh, I got it! Thanks Jiri! Btw, I have another questions. 1) I would like to know can call transfer being done when the connection is P2P? When I tried to use relay (mediaproxy) to do the call transfer, it's able to transfer the call to the other party whereas when the condition is P2P, it just can't pass the correct signal. 2) Can SER support SPA942 ? Or is there some settings that I need to configure on SER ? Thanks. Cheers, Roa Yu -----Original Message----- From: Jiri Kuthan [mailto:jiri@iptel.org] Sent: Wednesday, October 10, 2007 2:56 PM To: roayu; SIP Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Get RealTime Online Users status yes, set usrloc's database mode to 1. -jiri At 03:32 10/10/2007, roayu wrote: >Thanks for your reply. I found that it's only update after around 30 >seconds. Is there anyway that I can fasten the update on the database? > >Thanks. > >Cheers, >Roa Yu > >-----Original Message----- >From: SIP [mailto:sip@arcdiv.com] >Sent: Tuesday, October 09, 2007 9:14 PM >To: roayu >Cc: serusers(a)lists.iptel.org >Subject: Re: [Serusers] Get RealTime Online Users status > >roayu wrote: >> >> Hi there! >> >> Can anyone tell me how to get the RealTime Online user status other >> than using command '*serctl ul show*'? Or how can I store the realtime >> online user status to the MySQL db? >> >> Thanks. >> >> Cheers, >> >> Roa Yu J >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Serusers mailing list >> Serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> >The location table in the MySQL database stores what are, in effect, >currently online users. It is, however, only an approximation. When a UA >registers, it sends an expiration time on its registration and that gets >stored in the location table. If the user disconnects without cancelling >his registration (some UAs send am expire register message to 'log out' >and some don't), then the data may still be in the table until the >expire time occurs. Realistically, though, you can get a good idea of >currenly online users using the location table and while it may not be >100% accurate, it's close enough for government work, as it were. > >N. >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[Serusers] SER and OpenXCAP
by Tomasz Zieleniewski 10 Oct '07

10 Oct '07

Hi, is there any view about ser working with openXCAP serverI set up openXCAP and tried it but unfortunately there are some incompatibility issues.I got the following error in openXCAP: Invalid Document Selector xcap-root/pres-rules/users/pgr(a)voip.touk.pl/index (the Document Selector must be 'users' or 'global': 'pres-rules') my xcap server listen on port 8000 and my ser config is the following: modparam("xcap", "xcap_root","http://voip.touk.pl:8000/xcap-root") Cheers -tomasz

1 0

Re: [Serusers] Get RealTime Online Users status
by Jiri Kuthan 10 Oct '07

10 Oct '07

yes, set usrloc's database mode to 1. -jiri At 03:32 10/10/2007, roayu wrote: >Thanks for your reply. I found that it's only update after around 30 >seconds. Is there anyway that I can fasten the update on the database? > >Thanks. > >Cheers, >Roa Yu > >-----Original Message----- >From: SIP [mailto:sip@arcdiv.com] >Sent: Tuesday, October 09, 2007 9:14 PM >To: roayu >Cc: serusers(a)lists.iptel.org >Subject: Re: [Serusers] Get RealTime Online Users status > >roayu wrote: >> >> Hi there! >> >> Can anyone tell me how to get the RealTime Online user status other >> than using command '*serctl ul show*'? Or how can I store the realtime >> online user status to the MySQL db? >> >> Thanks. >> >> Cheers, >> >> Roa Yu J >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Serusers mailing list >> Serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> >The location table in the MySQL database stores what are, in effect, >currently online users. It is, however, only an approximation. When a UA >registers, it sends an expiration time on its registration and that gets >stored in the location table. If the user disconnects without cancelling >his registration (some UAs send am expire register message to 'log out' >and some don't), then the data may still be in the table until the >expire time occurs. Realistically, though, you can get a good idea of >currenly online users using the location table and while it may not be >100% accurate, it's close enough for government work, as it were. > >N. >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

2 1

[OpenSER-Users] mi_xmlrpc
by Kim Culhan 10 Oct '07

10 Oct '07

Running openser on FreeBSD-6.2 stable: version: openser 1.2.2-tls (i386/freebsd) When starting openser with the mi_xmlrpc module enabled this is returned: 0(56397) ERROR: load_module: could not open module </usr/local/lib/openser/modules/mi_xmlrpc.so>: /usr/local/lib/libxmlrpc_client.so.7: Undefined symbol "HTThroughLine" On Monday Aug 13 2007 Bogdan-Andrei Iancu wrote: > As xmlrpc-c generates a bunch of libs (prefix llibxmlrpcxxxxxx), try to > add them all for module linking. See modules/mi_xmlrpc/Makefile, the > LIBS line. I have added them all to the modules/mi_xmlrpc/Makefile but the problem remains. Using xmlrpc-c and libwww from recent FreeBSD ports. Looking at libxmlrpc_clent.so.7 nm -B libxmlrpc_client.so.7 | grep HTThroughLine returns U HTThroughLine If anyone can shed some light on this it would be very greatly apprecated. regards -kim --

2 1

Re: [Serusers] Get RealTime Online Users status
by roayu 10 Oct '07

10 Oct '07

Thanks for your reply. I found that it's only update after around 30 seconds. Is there anyway that I can fasten the update on the database? Thanks. Cheers, Roa Yu -----Original Message----- From: SIP [mailto:sip@arcdiv.com] Sent: Tuesday, October 09, 2007 9:14 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] Get RealTime Online Users status roayu wrote: > > Hi there! > > Can anyone tell me how to get the RealTime Online user status other > than using command '*serctl ul show*'? Or how can I store the realtime > online user status to the MySQL db? > > Thanks. > > Cheers, > > Roa Yu J > > ------------------------------------------------------------------------ > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > The location table in the MySQL database stores what are, in effect, currently online users. It is, however, only an approximation. When a UA registers, it sends an expiration time on its registration and that gets stored in the location table. If the user disconnects without cancelling his registration (some UAs send am expire register message to 'log out' and some don't), then the data may still be in the table until the expire time occurs. Realistically, though, you can get a good idea of currenly online users using the location table and while it may not be 100% accurate, it's close enough for government work, as it were. N.

1 0

[OpenSER-Users] Media Proxy Installation
by Arya 10 Oct '07

10 Oct '07

Hello I installed Media proxy by downloading it and putting it in : /usr/local/mediaproxy than I copied /usr/local/mediaproxy/boot/mediaproxy.debian to /etc/init.d/mediaproxy and started it Is that all I need to do with the installation? What would I have to add to openser.cfg? -- Thank You

4 9

[OpenSER-Users] REGISTER Invalid Cseq Number
by tele 09 Oct '07

09 Oct '07

Hi all, I've a problem with a CPE/IAD that sometimes send a REGISTER with same Cseq in the location entry, OpenSER response is "400 Bad Request" with P-Registrar-Error: Invalid CSeq number. This causes the CPE/IAD to disable the voice port. I want disable this kind of check, i've try to set the modparam("usrloc", "cseq_delay", 0) for disable retrasmission check but doesn't work Any other idea to solve this? i've this problem with only this CPE. Thanks! :tele

3 4

[Serusers] SER and OpenXCAP
by Tomasz Zieleniewski 09 Oct '07

09 Oct '07

Hi, is there any view about ser working with openXCAP server I set up openXCAP and tried it but unfortunately there are some incompatibility issues. I got the following error in openXCAP: Invalid Document Selector xcap-root/pres-rules/users/pgr(a)voip.touk.pl/index

1 1

[OpenSER-Users] [wiki] Adding page about SIP devices supporting presence PUBLISH
by Iñaki Baz Castillo 09 Oct '07

09 Oct '07

Hi, pua_usrloc has an issue with SIP device that publish their state, since the PUBLISH is generated twice: 1) With the REGISTER by pua_usrloc module. 2) With the PUBLISH sent by the device. If for example the user sets "Online" - "Away" status and after that the device refreshes the REGISTER, then its state will just be "Online" (the state pua_usrloc generates). In order to avoid this issue it could be nice to query a BD table looking for the "User-Agent" and just exec "pua_set_publish()" if the device doesn't support presence PUBLISH. The query could be done by regular expressions in order to allow different versions of same device, all of them supporting presence. A doubt I have is: Would be easier store user-agents of devices supporting presence? or not supporting presence? which one list will be shorter? Because it, I'd like to start a page in the wiki containing all the devices "User-Agent" (with regular expression) supporting (or not) presence PUBLISH, and a small script to generate the table after copy&paste the whole list from the web. What do you think about it? Regards. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

3 17

[Serusers] Get RealTime Online Users status
by roayu 09 Oct '07

09 Oct '07

Hi there! Can anyone tell me how to get the RealTime Online user status other than using command 'serctl ul show'? Or how can I store the realtime online user status to the MySQL db? Thanks. Cheers, Roa Yu :-)

2 1

Re: Re: R: [OpenSER-Users] Problem with 2 PC behind the same NAT
by Daniel Grotti 09 Oct '07

09 Oct '07

I've just tried and in this way (UA1-------> NAT--------> PROXY---------> UA2), with UA2 in the same net of SIP proxy, Mediaproxy works. El Tuesday 09 October 2007 13:26:19 Daniel Grotti escribió: > I have not configured it explicitely. > This is my opense.cfg file: Please, first try what I said: A call from UA1 (behind your NAT) to other device out of your LAN. MediaProxy (if it well configured) should work in that case. Does it? -- Iñaki Baz Castillo ibc(a)in.ilimit.es _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users <https://mail.unibo.it/exchweb/bin/redir.asp?URL=http://openser.org/cgi-bin/…>

1 0

[OpenSER-Users] CDRTool --Suggestion Required
by srinivas Antarvedi 09 Oct '07

09 Oct '07

Hello users, Actually i want to implement prepaid billing solution to my customers using radius accounting I have gone through the documentation provided with the sources of CDRTool and got confused with all dsn details,connections to mediaproxy ,asterisk,radius,openser. I want to first understand the call flow if using this CDRTool so that i can design mysetup. The present setup i have is 1)openser for authentication 2)Call control using asterisk+asterisk-b2bua in combination with radius Then u may ask why i am after this CDRTool because i was unable to deduct the balance and implement different tariffs using that setup in realtime so i wish to know from you what are different setups i can made using the jumbo CDRTool project so that i can select one and working . First give me suggestion so that i will start with minimal setup -- Srinivas Antarvedi

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users