- sr-users - kamailio.org

[OpenSER-Users] openser 1.3 packaging
by Daniel-Constantin Mierla 12 Dec '07

12 Dec '07

Hello, for those that want to start updating the spec files for packages and test them, I have created a README file that lists the new modules and their dependencies, as well as suggestions for where to place the modules. Also, I have uploaded today's source tarball, so all elements are in single place. Please check: http://www.openser.org/pub/openser/pre-1.3.0/ If you need further help, let me know. Comments and suggestions are welcome. Cheers, Daniel

4 3

[Serusers] SER Strange Calling Issue
by Arun Kumar 12 Dec '07

12 Dec '07

Hi User ---> SER -----> BroadoSoft -----> PSTN when I send calls to PSTN I'm changing the From to one of BroadSoft users b'coz without that BroadSoft don't allow me to Call PSTN. When call comes to PSTN Route I'm changing the the From : subst('/^From:(.*)sip:[^@]*@[a-zA-Z0-9.]+(.*)$/From:< sip:8233843435@Broadsoft IP>/ig'); calls goes fine to Broadsoft and then to PSTN but, once call connect to PSTN I'm able to hear other side but my phone always shows Calling and other side is not able to hear me (b'coz from my side channel is not getting answered). I tried forcing mediaproxy before PSTN Calls but no luck. Please advise. Its very urgent. Thanks, Arun

1 1

[OpenSER-Users] Openser 1.3 howto
by Fabio Isgro 12 Dec '07

12 Dec '07

How to install openser 1.3 there is any howto out there? Best Regards -- -\\_ Fabio Isgro' -}}\_ Babel S.r.l. - http://www.babel.it -}}}\-__ Tel. +39.06.91801075 }\/ -}}}\\°_\ Fax +39.06.91612446 }/\ }}}}\\ _/ Voip sip:9093@voip.babel.it ------ P.zza S.Benedetto da Norcia, 33 - 00040 Pomezia (Roma) B ° a ° b° e° l "CONFIDENZIALE: Questo messaggio ed i suoi allegati sono di carattere confidenziale per i destinatari in indirizzo. Se hai ricevuto questo messaggio per errore sei invitato cortesemente a rispondere immediatamente al mittente e cancellare tutti i suoi contenuti."

2 1

[OpenSER-Users] CPL DTD
by Daniel Grotti 12 Dec '07

12 Dec '07

Hi Bogdan, Cpl modules is based on DTD file. It doesn't support namespaces. So how could I make extensions (for example add a new node) on the dtd file remaining RFC3880 compliant ? Is it possible? Regards, daniel

1 0

[OpenSER-Users] Display Registered Users
by VoIP Forums www.Go4Calls.com 12 Dec '07

12 Dec '07

Hi All, Could you please guide us with right cmd to display the users which are registered successfully with openser? Regards, www.Go4Calls.Com VoIP Forums _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

2 2

[OpenSER-Users] Question about avp_aliases and script_flags
by Helmut Kuper 12 Dec '07

12 Dec '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, avpops doc say that avp spec for integer values is $avp(i[script_flags]:<ID>) Is it possible to set avp aliases to that values, e.g. avp_aliases="x=i1:10" avp_aliases="y=i2:10" ? When I do that, I got this error message in openser 1.3: Nov 14 16:00:42 [28355] ERROR:core:add_avp_galias: duplicate alias/avp entry Nov 14 16:00:42 [28355] ERROR:core:add_avp_galias_str: add global alias failed Nov 14 16:00:42 [28355] CRITICAL:core:yyerror: parse error (54,3-4): invalid AVP aliases regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHOxLU4tZeNddg3dwRArlWAKCd7mGq6K3yODf/8bvZRa9F/vcpugCfWsb7 Ale6eO7Xz8C0fnvyg5m4/n0= =tPWq -----END PGP SIGNATURE-----

2 9

[OpenSER-Users] Could someone help me with WeSIP ?
by Daniel Grotti 11 Dec '07

11 Dec '07

Hi all, I'm trying to use WeSIP but I don't be able to connect to "Manager" link. I receive a 500 Http error. This is my server.xml file: where I hide Proxy IP Address with PROXY_IP and in OpenserSER I have setted modparam("seas", "listen_sockets","localhost:5080") ***************************************************************************************** <Server port="8005" shutdown="SHUTDOWN" debug="0"> <Service name="Tomcat-Standalone"> <Connector className="org.apache.catalina.connector.http.HttpConnector" port="8080" minProcessors="5" maxProcessors="75" enableLookups="true" address="PROXY_IP" acceptCount="10" debug="0" /> <Connector className="com.voztele.sipservlet.connector.SipConnector" minProcessors="5" maxProcessors="75" enableLookups="true" acceptCount="10" debug="0" addresses="PROXY_IP:5060" pathName="com.voztele" protocol="udp" > <ExtraProperties> <Property key="com.voztele.javax.sip.SER_ADDRESS" value="localhost" /> <Property key="com.voztele.javax.sip.SER_PORT" value="5080" /> <Property key="com.voztele.STATISTICS" value="false" /> <Property key="javax.sip.STACK_NAME" value="app_server_one" /> <Property key="javax.sip.THREAD_POOL_SIZE" value="100" /> <Property key="com.voztele.javax.sip.THREAD_POOL_SIZE" value="100" /> <Property key="com.voztele.javax.sip.REENTRANT_LISTENER" value="true" /> <Property key="javax.sip.AUTOMATIC_DIALOG_SUPPORT" value="false" /> <Property key="com.voztele.javax.sip.TRACE_LEVEL" value="0" /> </ExtraProperties> </Connector> <Engine name="Standalone" defaultHost="PROXY_IP" debug="0" className="com.voztele.sipservlet.core.ConvergedEngine"> <Mapper className="org.apache.catalina.core.StandardEngineMapper" protocol="HTTP/1.1"/> <Mapper className="org.apache.catalina.core.StandardEngineMapper" protocol="HTTP/1.0"/> <Mapper className="com.voztele.sipservlet.core.EngineSipMapper" protocol="SIP/2.0"/> <Logger className="org.apache.catalina.logger.FileLogger" timestamp="true"/> <Realm className="org.apache.catalina.realm.MemoryRealm" /> <Host name="PROXY_IP" nameSip="PROXY_IP_5060" debug="0" appBase="wesipapps" port="5060" className="com.voztele.sipservlet.core.ConvergedHost" unpackWARs="true"> <Logger className="org.apache.catalina.logger.FileLogger" timestamp="true"/> <Mapper className="com.voztele.sipservlet.core.SipHostMapper" protocol="SIP/2.0"/> <Mapper className="org.apache.catalina.core.HttpHostMapper" protocol="HTTP/1.1"/> <Mapper className="org.apache.catalina.core.HttpHostMapper" protocol="HTTP/1.0"/>  </Host> </Engine> </Service> </Server> ************************************************************************************************************* Regards, daniel

2 1

[OpenSER-Users] Softphones supporting "pua_bla"?
by Iñaki Baz Castillo 11 Dec '07

11 Dec '07

Hi, I'd like to try the "pua_bla" module but don't have a SNOM or Polycom (models I think they support BLA). I've a Thomson S2030 but it does BLF (it doesn't send a REGISTER, just a SUBSCRIBE with "Event: dialog"). Is there any way to try the "pua_bla" module? any softphone supporting it? Thanks a lot. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

4 6

[OpenSER-Users] FW: No user and password are stored in the openxcap db, how do i do?
by KevinKinnan 11 Dec '07

11 Dec '07

1st question: There is no user and pwd in the db for the first time use. if I want to send a http request to openxcap what user name and password should i use? BTW, openims core and openser(presence module) are using in front of openxcap. I atteched a trace that still showed 401 after digesting request(by default, the username and password are both alice). 2nd question: I am designing a j2me programe to connect to openxcap, but only GET, POST, HEAD methods are supoorted in j2me. Can I use POST instead of PUT for request sending? THANK U! Regards, Kevin 使用新一代 Windows Live Messenger 轻松交流和共享！立即体验！ _________________________________________________________________ 天凉了，添衣了，心动了，“七件”了 http://get.live.cn

1 0

Re: [Serusers] Loading attributes question
by Jiri Kuthan 11 Dec '07

11 Dec '07

I'm afraid there is no easy way for doing so -- the multiple-value AVPs have been seen as "sets", disregarding the order. I think one would have to have a new function like order_avp($avp)... At 00:05 10/12/2007, Steven C. Blair wrote: >Content-Language: en-US >Content-Type: multipart/alternative; > boundary="_000_EBC0E89A333CED46A6273F415B6386E814BA4E6EEBMAILBOXexchan_" > > > >I have a locally defined table with attributes which may contain several values. I define each attribute /value pair as a new entry in the table then use avp_load to retrieve these values from the database. The problem is that I don't know how to retrieve the values in a specific order. For example if I have a=1, a=2, a=3 when I load the values for "a" they may be 2,1,3 or 3,1,2, etc. Is there any way to force loading in a specific sequence. > >Thanks,Steve >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[OpenSER-Users] users@lists.openser.org
by minz1 11 Dec '07

11 Dec '07

Hi Schumann Sebastian, I too have the same problem regarding XCap Server project. ---------------------------------------------------------------------------------------- Following are the trace generated after running "python2.4 openxcap --no-fork" command:- ---------------------------------------------------------------------------------------- Starting Open XCAP 0.9.7 Traceback (most recent call last): File "/usr/local/bin/openxcap", line 56, in ? from xcap.server import XCAPServer File "/usr/local/lib/python2.4/site-packages/xcap/server.py", line 21, in ? from xcap import authentication File "/usr/local/lib/python2.4/site-packages/xcap/authentication.py", line 21, in ? from xcap.appusage import getApplicationForURI File "/usr/local/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 491, in ? applications = {'xcap-caps': XCAPCapabilitiesApplication(), File "/usr/local/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 64, in __init__ self.xml_schema = etree.XMLSchema(xml_schema_doc) File "xmlschema.pxi", line 67, in etree.XMLSchema.__init__ etree.XMLSchemaParseError: Document is not valid XML Schema ------------------------------------------------------------------------------------------ Following are the files which we are using:= ================================= openxcap-0.9.7 libxml2-2.6.30 twisted-web2-0.2.0+svn20070403.orig Python-2.4.2 lxml-1.3.4 zope.interface-3.3.0 python-application-1.0.9 MySQL-python-1.2.2 ================================= I followed the instructions from the openxcap webpage and did what instructed there but not able to make it work. Please help me. I will be always greatful to that help. regds Suraj Schumann Sebastian wrote: Dear all I have a big problem with openxcap. I don't get it work :( As I saw on their webpage, this mailing list can be posted for this concern as well. I am using version 0.9.3 and acc. the installation file on http://www.openxcap.org all current dependencies from the Debian unstable distribution. When I start /usr/bin/openxcap, the following error occurs in the syslog: Sep 25 17:01:21 openxcap openxcap[11876]: [-] Log opened. Sep 25 17:01:21 openxcap openxcap[11876]: [-] Starting Open XCAP 0.9.3 Sep 25 17:01:27 openxcap openxcap[11876]: [-] Traceback (most recent call last): Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/bin/openxcap", line 56, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.server import XCAPServer Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/server.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap import authentication Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/authentication.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.appusage import getApplicationForURI Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 466, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] applications = {'xcap-caps': XCAPCapabilitiesApplication(), Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 64, in __init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] self.xml_schema = etree.XMLSchema(xml_schema_doc) Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "xmlschema.pxi", line 67, in etree.XMLSchema.__init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] etree.XMLSchemaParseError: Document is not valid XML Schema As I wrote, I followed all instructions from the openxcap webpage but didn't find any hints how to make it work. Any help on that would be appreciated. Best regards Sebastian -- Sebastian Schumann Diploma Student Architecture and Design Department Slovak Telekom, a. s. T-Com, Operations Unit Production and Service Division Innovations and Enterprise Solution Subunit Address: Namestie Slobody 6, 817 62 Bratislava, Slovakia Office: Room 449, Jarabinkova 1, 821 09 Bratislava, Slovakia +421 2 588 13332 (tel) +421 910 643010 (mobile) +49 175 1925928 (mobile) -- View this message in context: http://www.nabble.com/users%40lists.openser.org-tp14279161p14279161.html Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

1 0

[OpenSER-Users] users@lists.openser.org
by minz1 11 Dec '07

11 Dec '07

Hi Schumann Sebastian, I too have the same problem regarding XCap Server project. ---------------------------------------------------------------------------------------- Following are the trace generated after running "python2.4 openxcap --no-fork" command:- ---------------------------------------------------------------------------------------- Starting Open XCAP 0.9.7 Traceback (most recent call last): File "/usr/local/bin/openxcap", line 56, in ? from xcap.server import XCAPServer File "/usr/local/lib/python2.4/site-packages/xcap/server.py", line 21, in ? from xcap import authentication File "/usr/local/lib/python2.4/site-packages/xcap/authentication.py", line 21, in ? from xcap.appusage import getApplicationForURI File "/usr/local/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 491, in ? applications = {'xcap-caps': XCAPCapabilitiesApplication(), File "/usr/local/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 64, in __init__ self.xml_schema = etree.XMLSchema(xml_schema_doc) File "xmlschema.pxi", line 67, in etree.XMLSchema.__init__ etree.XMLSchemaParseError: Document is not valid XML Schema ------------------------------------------------------------------------------------------ Following are the files which we are using:= ================================= openxcap-0.9.7 libxml2-2.6.30 twisted-web2-0.2.0+svn20070403.orig Python-2.4.2 lxml-1.3.4 zope.interface-3.3.0 python-application-1.0.9 MySQL-python-1.2.2 ================================= I followed the instructions from the openxcap webpage and did what instructed there but not able to make it work. Please help me. I will be always greatful to that help. regds Suraj Schumann Sebastian wrote: Dear all I have a big problem with openxcap. I don't get it work :( As I saw on their webpage, this mailing list can be posted for this concern as well. I am using version 0.9.3 and acc. the installation file on http://www.openxcap.org all current dependencies from the Debian unstable distribution. When I start /usr/bin/openxcap, the following error occurs in the syslog: Sep 25 17:01:21 openxcap openxcap[11876]: [-] Log opened. Sep 25 17:01:21 openxcap openxcap[11876]: [-] Starting Open XCAP 0.9.3 Sep 25 17:01:27 openxcap openxcap[11876]: [-] Traceback (most recent call last): Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/bin/openxcap", line 56, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.server import XCAPServer Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/server.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap import authentication Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/authentication.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.appusage import getApplicationForURI Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 466, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] applications = {'xcap-caps': XCAPCapabilitiesApplication(), Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 64, in __init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] self.xml_schema = etree.XMLSchema(xml_schema_doc) Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "xmlschema.pxi", line 67, in etree.XMLSchema.__init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] etree.XMLSchemaParseError: Document is not valid XML Schema As I wrote, I followed all instructions from the openxcap webpage but didn't find any hints how to make it work. Any help on that would be appreciated. Best regards Sebastian -- Sebastian Schumann Diploma Student Architecture and Design Department Slovak Telekom, a. s. T-Com, Operations Unit Production and Service Division Innovations and Enterprise Solution Subunit Address: Namestie Slobody 6, 817 62 Bratislava, Slovakia Office: Room 449, Jarabinkova 1, 821 09 Bratislava, Slovakia +421 2 588 13332 (tel) +421 910 643010 (mobile) +49 175 1925928 (mobile) -- View this message in context: http://www.nabble.com/users%40lists.openser.org-tp14279160p14279160.html Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

1 0

[Serusers] rewritehostport and RFC3261 compliant
by inge 11 Dec '07

11 Dec '07

Hi all, I find an issue with a problem encountered on some products. The problem only concerns on-net calls. In fact, when a SER User A calls a SER User B : - if B doesn't answer, after the tm timer : ==> t_on_failure("1") ==> setflagt(24) ==> load $ruri/username in vm_uri/usr_vm if flag is set to 24 then ==> avp_pushto $ruri s:vm_uri ==> resetflag(24) ==> add prefix Prefix("710") ==> rewritehostport(Asterisk:4060) ==> append_branch ==> t_relay_to_udp(Asterisk,4060) This is the process apply for transfer the call to the voicemail Asterisk. But, and only in this on-net case, the To-Tag change during this process, cause the failure of communication for some products. Whereas the RFC 3261 specify "... This tag will be incorporated by both endpoints into the dialog and will be included in all future requests and responses in this call ...". Thanks for your support.

3 6

[OpenSER-Users] new stuff in 1.3.0
by Daniel-Constantin Mierla 11 Dec '07

11 Dec '07

Hello, I started a dokuwiki page to collect the new things in openser 1.3.x, I still have a lot to add, however, since there are new modules and enhancements from many developers, it is better that everybody contribute to this page, to have a good image of what is new in the upcoming release. I am sure I will be forgetting some. The page will be used in building release announcement. http://www.openser.org/dokuwiki/doku.php/sandbox:new-in-1.3.x Thanks, Daniel

1 0

[Serusers] media proxy manage NAT IP Change?
by Gonzalo J. Sambucaro 11 Dec '07

11 Dec '07

Hi, I would like to know if the Media Proxy Server is able to manage the NAT IP change of an established rtp stream and continue working with the new NAT IP without problems? Saludos, Gonzalo. -- Gonzalo J. Sambucaro Ingeniería de Software Tel: +54-341-4808585 MSLC gonzalo(a)mslc.com.ar www.mslc.com.ar Ocampo y Esmeralda - Vivero de Empresas de Base Tecnológica Ciudad Universitaria Rosario UNR, CCT CONICET Rosario - Santa Fé - Argentina

1 0

[OpenSER-Users] trunk - openserro password not working
by Richard Bennett 11 Dec '07

11 Dec '07

Hi, After moving a working openser config for trunk to a new server, and updating the sources, I kept getting the error: ERROR:mysql:db_mysql_new_connection: driver error: Access denied for user 'openserro'@'localhost' (using password: YES) I double-checked, and the settings in: /usr/local/etc/openser/openserctlrc were set correct: DBROPW=newpassword So I set the mysql password for openserro back to the default 'openserro' in mysql, and it works, even with a different value in openserctlrc. Is this a known issue, bug, or am I doing something wrong? Richard.

2 3

[OpenSER-Users] Set CallerID as Username
by VoIP Forums www.Go4Calls.com 11 Dec '07

11 Dec '07

Hi All, i was routing calls from openser to asterisk to make accounting in asterisk side. I need small help, how i can set callerid = registrar username so in asterisk server i can capture the callerid to do the billing etc.... Thank You _________________________________________________________________ Explore the seven wonders of the world http://search.msn.com/results.aspx?q=7+wonders+world&mkt=en-US&form=QBRE

2 1

Re: [OpenSER-Users] auth_db module - get_ha1(): Error while querying database
by Daniel-Constantin Mierla 11 Dec '07

11 Dec '07

Hello, seems that you haven't updated the database structure. In 1.2, there was a refurbishment that included primary keys, a.s.o. As I could guess from patch, you still use the old database schema. Cheers, Daniel PS. Please CC to mailing list, the answer can come much faster, with more competence from people experiencing same issues, and will help new comers with same case. On 12/10/07 15:07, Mihail Gluhowchenko wrote: > Hello; > Sorry %) > -- > Regards, > Mihail Gluhowchenko. > Enterprise ELTEX > 2007/12/10, Daniel-Constantin Mierla <daniel(a)voice-system.ro > <mailto:daniel@voice-system.ro>>: > > Hello, > > can you please send unified format for the patch? > > diff -u oldfile newfile > > Thanks, > Daniel > > > On 12/10/07 14:29, Mihail Gluhowchenko wrote: > > Hello; > > Here it is sc.patch; > > my version is 'openser-1.2.2-notls' > > -- > > Regards, > > Mihail Gluhowchenko. > > Enterprise ELTEX. > > > > 2007/12/10, Daniel-Constantin Mierla < daniel(a)voice-system.ro > <mailto:daniel@voice-system.ro> > > <mailto:daniel@voice-system.ro <mailto:daniel@voice-system.ro>>>: > > > > > > > > On 12/10/07 07:04, Mihail Gluhowchenko wrote: > > > Hello all work; :) > > was your version old or there is a bug in sc.dbtext? Can you > post the > > patch of changes? > > > > Best regards, > > Daniel > > > > > > > in script sc.dbtext use old format subscriber. > > > Little changes and all work > > > > > > date_now=$(date +"%s") > > > GLOB_ID=$(od -N4 -d /dev/random | head -n1 | cut -d' ' -f2,3 | > > sed -e > > > 's/ //') > > > > > > add) > > > if [ $# -ne 4 ] ; then > > > usage > > > exit 1 > > > fi > > > shift > > > credentials $1 $2 > > > is_user $1 > > > if [ $? -eq 0 ] ; then > > > echo -e "\nuser already exists\n" > > > exit 1 > > > fi > > > #Add to SUBSCRIBER file > > > #id(int,auto) username(str) domain(str) > > password(str) > > > first_name(str,null) last_name(str,null) email_address(str) > > > datetime_created(int) last_modified(int) ha1(str) ha1b(str) > > > rpid(str,null) > > > > > > > > > line="$GLOB_ID:$SERUSER:$SERDOMAIN:$2:::$3:$date_now:$date_now:$HA1:$HA1B:" > > > > > > echo $line >> $SUB_FILE > > > #Add to URI file > > > #id(int,auto) domain(str) uri_user(str) > > > last_modified(int) > > > line="$GLOB_ID:$SERDOMAIN:$SERUSER:$date_now" > > > echo $line >> $URI_FILE > > > echo -e "\nNew user ($SERUSER@$SERDOMAIN) > added to > > > DBTEXT files\n" > > > ;; > > > -- > > > Regards, > > > Mihail Gluhowchenko. > > > Enterprise ELTEX. > > > > > > > > >

2 1

[OpenSER-Users] Loop Detection
by Daniel Corbe 11 Dec '07

11 Dec '07

I have a problem. I'm taking INVITES from a PortaSIP proxy and handing it back with a new request URI and To: header; however, their loop detection algorithm is calling this a loop. Is there a way to fix this from within OpenSER? I'm assuming my proxy would have to send an INVITE with a completely new branch tag and From tag? 10 Dec 14:52:30.831/GLOBAL/b2bua: SENDING message to 206.71.169.114:5060: INVITE sip:*94310@206.71.169.114:5060 SIP/2.0 Via: SIP/2.0/UDP 216.151.143.69:5061 ;branch=z9hG4bKecaee2770d3db1e3a26ddc741511b55b;rport Max-Forwards: 70 From: <sip:18589520696@216.151.143.69>;tag=3b383c39c2bc93d8106f4425074ef399 To: <sip:*94310@206.71.169.114> Call-ID: 722814-3406315950-714741(a)msx69.mydomain.com~1o CSeq: 200 INVITE Contact: Anonymous <sip:216.151.143.69:5061> Expires: 300 User-Agent: Sippy cisco-GUID: 2108088383-2809270748-2290810900-572575638 h323-conf-id: 2108088383-2809270748-2290810900-572575638 Content-Length: 201 Content-Type: application/sdp v=0 o=Sippy 156402124 0 IN IP4 216.151.143.69 s=sip call t=0 0 m=audio 42486 RTP/AVP 18 0 8 c=IN IP4 216.151.143.77 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:18 G729/8000 a=sendrecv 10 Dec 14:52:30.841/GLOBAL/b2bua: RECEIVED message from 206.71.169.114:5060: SIP/2.0 100 Giving a try Via: SIP/2.0/UDP 216.151.143.69:5061 ;branch=z9hG4bKecaee2770d3db1e3a26ddc741511b55b;rport=5061 From: <sip:18589520696@216.151.143.69>;tag=3b383c39c2bc93d8106f4425074ef399 To: <sip:*94310@206.71.169.114> Call-ID: 722814-3406315950-714741(a)msx69.mydomain.com~1o CSeq: 200 INVITE Server: OpenSER (1.2.2-notls (i386/freebsd)) Content-Length: 0 10 Dec 14:52:30.842/GLOBAL/ser[69804]: RECEIVED message from 206.71.169.114:5060: INVITE sip:1a10000000009@216.151.143.69:5060 SIP/2.0 Record-Route: <sip:206.71.169.114 ;lr=on;ftag=3b383c39c2bc93d8106f4425074ef399;did=fad.a2f4eb52> Via: SIP/2.0/UDP 206.71.169.114;branch=z9hG4bK961c.41ea57a.0 Via: SIP/2.0/UDP 216.151.143.69:5061 ;branch=z9hG4bKecaee2770d3db1e3a26ddc741511b55b;rport=5061 Max-Forwards: 69 From: <sip:18589520696@216.151.143.69>;tag=3b383c39c2bc93d8106f4425074ef399 To: <sip:1a10000000009@216.151.143.69:5060> Call-ID: 722814-3406315950-714741(a)msx69.mydomain.com~1o CSeq: 200 INVITE Contact: Anonymous <sip:216.151.143.69:5061> Expires: 300 User-Agent: Sippy cisco-GUID: 2108088383-2809270748-2290810900-572575638 h323-conf-id: 2108088383-2809270748-2290810900-572575638 Content-Length: 201 Content-Type: application/sdp P-hint: rr-enforced v=0 o=Sippy 156402124 0 IN IP4 216.151.143.69 s=sip call t=0 0 m=audio 42486 RTP/AVP 18 0 8 c=IN IP4 216.151.143.77 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:18 G729/8000 a=sendrecv 10 Dec 14:52:30.842/722814-3406315950-714741@msx69.mydomain.com~1o/ser[69804]: processing INVITE received from 206.71.169.114 10 Dec 14:52:30.843/GLOBAL/ser[69804]: SENDING message to 206.71.169.114:5060: SIP/2.0 100 trying -- your call is important to us Via: SIP/2.0/UDP 206.71.169.114;branch=z9hG4bK961c.41ea57a.0 Via: SIP/2.0/UDP 216.151.143.69:5061 ;branch=z9hG4bKecaee2770d3db1e3a26ddc741511b55b;rport=5061 From: <sip:18589520696@216.151.143.69>;tag=3b383c39c2bc93d8106f4425074ef399 To: <sip:1a10000000009@216.151.143.69:5060> Call-ID: 722814-3406315950-714741(a)msx69.mydomain.com~1o CSeq: 200 INVITE Server: Sip EXpress router (0.9.6 (i386/freebsd)) Content-Length: 0 10 Dec 14:52:30.844/GLOBAL/ser[69804]: SENDING message to 216.151.143.69:5061: INVITE sip:1a10000000009@216.151.143.69:5061 SIP/2.0 Record-Route: <sip:216.151.143.69;ftag=3b383c39c2bc93d8106f4425074ef399;lr> Record-Route: <sip:206.71.169.114 ;lr=on;ftag=3b383c39c2bc93d8106f4425074ef399;did=fad.a2f4eb52> Via: SIP/2.0/UDP 216.151.143.69;branch= z9hG4bK961c.003d31266db19cfeb34aa550d186a976.0 Via: SIP/2.0/UDP 206.71.169.114;branch=z9hG4bK961c.41ea57a.0 Via: SIP/2.0/UDP 216.151.143.69:5061 ;branch=z9hG4bKecaee2770d3db1e3a26ddc741511b55b;rport=5061 Max-Forwards: 16 From: <sip:18589520696@216.151.143.69>;tag=3b383c39c2bc93d8106f4425074ef399 To: <sip:1a10000000009@216.151.143.69:5060> Call-ID: 722814-3406315950-714741(a)msx69.mydomain.com~1o CSeq: 200 INVITE Contact: Anonymous <sip:216.151.143.69:5061> Expires: 300 User-Agent: Sippy cisco-GUID: 2108088383-2809270748-2290810900-572575638 Content-Length: 201 Content-Type: application/sdp P-hint: rr-enforced v=0 o=Sippy 156402124 0 IN IP4 216.151.143.69 s=sip call t=0 0 m=audio 42486 RTP/AVP 18 0 8 c=IN IP4 216.151.143.77 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:18 G729/8000 a=sendrecv 10 Dec 14:52:30.844/GLOBAL/b2bua: RECEIVED message from 216.151.143.69:5060: INVITE sip:1a10000000009@216.151.143.69:5061 SIP/2.0 Record-Route: <sip:216.151.143.69;ftag=3b383c39c2bc93d8106f4425074ef399;lr> Record-Route: <sip:206.71.169.114 ;lr=on;ftag=3b383c39c2bc93d8106f4425074ef399;did=fad.a2f4eb52> Via: SIP/2.0/UDP 216.151.143.69;branch= z9hG4bK961c.003d31266db19cfeb34aa550d186a976.0 Via: SIP/2.0/UDP 206.71.169.114;branch=z9hG4bK961c.41ea57a.0 Via: SIP/2.0/UDP 216.151.143.69:5061 ;branch=z9hG4bKecaee2770d3db1e3a26ddc741511b55b;rport=5061 Max-Forwards: 16 From: <sip:18589520696@216.151.143.69>;tag=3b383c39c2bc93d8106f4425074ef399 To: <sip:1a10000000009@216.151.143.69:5060> Call-ID: 722814-3406315950-714741(a)msx69.mydomain.com~1o CSeq: 200 INVITE Contact: Anonymous <sip:216.151.143.69:5061> Expires: 300 User-Agent: Sippy cisco-GUID: 2108088383-2809270748-2290810900-572575638 Content-Length: 201 Content-Type: application/sdp P-hint: rr-enforced v=0 o=Sippy 156402124 0 IN IP4 216.151.143.69 s=sip call t=0 0 m=audio 42486 RTP/AVP 18 0 8 c=IN IP4 216.151.143.77 a=rtpmap:8 PCMA/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:18 G729/8000 a=sendrecv 10 Dec 14:52:30.847/GLOBAL/b2bua: SENDING message to 216.151.143.69:5060: SIP/2.0 482 Loop Detected Via: SIP/2.0/UDP 216.151.143.69;branch= z9hG4bK961c.003d31266db19cfeb34aa550d186a976.0 Via: SIP/2.0/UDP 206.71.169.114;branch=z9hG4bK961c.41ea57a.0 Via: SIP/2.0/UDP 216.151.143.69:5061 ;branch=z9hG4bKecaee2770d3db1e3a26ddc741511b55b;rport=5061 Record-Route: <sip:216.151.143.69;ftag=3b383c39c2bc93d8106f4425074ef399;lr> Record-Route: <sip:206.71.169.114 ;lr=on;ftag=3b383c39c2bc93d8106f4425074ef399;did=fad.a2f4eb52> From: <sip:18589520696@216.151.143.69>;tag=3b383c39c2bc93d8106f4425074ef399 To: <sip:1a10000000009@216.151.143.69:5060> Call-ID: 722814-3406315950-714741(a)msx69.mydomain.com~1o CSeq: 200 INVITE Server: Sippy

2 5

Re: [OpenSER-Users] Problem with Mediaproxy
by Daniel 10 Dec '07

10 Dec '07

Hi, this is my call flow (from client side making the call: 192.168.10.224): The INVITE received by 192.168.0.167 (sent by 192.168.10.224 and processed by proxy) has SDP body with PRIVATE IP and PORT. ----------------------------------------------------------------------------------- # 192.162.10.224 ----> PROXY Request-Line: INVITE sip:franco.callegati@PROXY_IP SIP/2.0 Message Header Via: SIP/2.0/UDP 192.168.10.224:64244 ;branch=z9hG4bK-d87543-9947ff15e2520b54-1--d87543- Max-Forwards: 70 Contact: <sip:daniel.grotti@192.168.10.224:64244> To: "franco.callegati"<sip:franco.callegati@PROXY_IP> From: "casa"<sip:daniel.grotti@PROXY_IP>;tag=4554424c Call-ID: YjRmZjU3ODAwMjIxMDU0MDUwNDllYzUwNmZiYTJjMmE. CSeq: 2 INVITE Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO Content-Type: application/sdp Proxy-Authorization: Digest username="1000",realm="PROXY_IP",nonce="47593c9fa32034a66fdb7493ff499c7215d4d8db",uri="sip: franco.callegati@PROXY _IP",response="82d21af18029aa02388869088c3619d2",algorithm=MD5 User-Agent: X-Lite release 1011s stamp 41150 Content-Length: 374 Message body Session Description Protocol Session Description Protocol Version (v): 0 Owner/Creator, Session Id (o): - 8 2 IN IP4 192.168.10.224 Session Name (s): CounterPath X-Lite 3.0 Connection Information (c): IN IP4 192.168.10.224 Time Description, active time (t): 0 0 Media Description, name and address (m): audio 53624 RTP/AVP 107 119 100 106 0 105 98 8 101 Media Attribute (a): fmtp:101 0-15 Media Attribute (a): rtpmap:107 BV32/16000 Media Attribute (a): rtpmap:119 BV32-FEC/16000 Media Attribute (a): rtpmap:100 SPEEX/16000 Media Attribute (a): rtpmap:106 SPEEX-FEC/16000 Media Attribute (a): rtpmap:105 SPEEX-FEC/8000 Media Attribute (a): rtpmap:98 iLBC/8000 Media Attribute (a): rtpmap:101 telephone-event/8000 Media Attribute (a): sendrecv # PROXY -----> 192.162.10.224 Status-Line: SIP/2.0 100 Trying Message Header Via: SIP/2.0/UDP 192.168.10.224:64244 ;branch=z9hG4bK-d87543-9947ff15e2520b54-1--d87543-;rport=28943;received= 85.18.14.25 To: "franco.callegati"<sip:franco.callegati@PROXY_IP> From: "casa"<sip:daniel.grotti@PROXY_IP>;tag=4554424c Call-ID: YjRmZjU3ODAwMjIxMDU0MDUwNDllYzUwNmZiYTJjMmE. CSeq: 2 INVITE Server: OpenSER (1.3.0-pre1-notls (i386/linux)) Content-Length: 0 # PROXY -----> 192.162.10.224 Status-Line: SIP/2.0 180 Ringing Message Header Via: SIP/2.0/UDP 192.168.10.224:64244;received=85.18.14.25 ;branch=z9hG4bK-d87543-9947ff15e2520b54-1--d87543-;rport=28943 Record-Route: <sip:PROXY_IP:5060;lr;nat=yes;ftag=4554424c> Contact: <sip:franco.callegati@85.18.14.25 :42214;rinstance=96888d44783df4a0> To: "franco.callegati"<sip:franco.callegati@PROXY_IP>;tag=d06d8b2d From: "casa"<sip:daniel.grotti@PROXY_IP>;tag=4554424c Call-ID: YjRmZjU3ODAwMjIxMDU0MDUwNDllYzUwNmZiYTJjMmE. CSeq: 2 INVITE User-Agent: X-Lite release 1011s stamp 41150 Content-Length: 0 # PROXY -----> 192.162.10.224 Status-Line: SIP/2.0 200 OK Message Header Via: SIP/2.0/UDP 192.168.10.224:64244;received=85.18.14.25 ;branch=z9hG4bK-d87543-9947ff15e2520b54-1--d87543-;rport=28943 Record-Route: <sip:PROXY_IP:5060;lr;nat=yes;ftag=4554424c> Contact: <sip:franco.callegati@85.18.14.25 :42214;rinstance=96888d44783df4a0> To: "franco.callegati"<sip:franco.callegati@PROXY_IP>;tag=d06d8b2d From: "casa"<sip:daniel.grotti@PROXY_IP>;tag=4554424c Call-ID: YjRmZjU3ODAwMjIxMDU0MDUwNDllYzUwNmZiYTJjMmE. CSeq: 2 INVITE Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO Content-Type: application/sdp User-Agent: X-Lite release 1011s stamp 41150 Content-Length: 372 Message body Session Description Protocol Session Description Protocol Version (v): 0 Owner/Creator, Session Id (o): - 7 2 IN IP4 192.168.0.167 Session Name (s): CounterPath X-Lite 3.0 Connection Information (c): IN IP4 192.168.0.167 Time Description, active time (t): 0 0 Media Description, name and address (m): audio 45566 RTP/AVP 107 119 100 106 0 105 98 8 101 Media Attribute (a): fmtp:101 0-15 Media Attribute (a): rtpmap:107 BV32/16000 Media Attribute (a): rtpmap:119 BV32-FEC/16000 Media Attribute (a): rtpmap:100 SPEEX/16000 Media Attribute (a): rtpmap:106 SPEEX-FEC/16000 Media Attribute (a): rtpmap:105 SPEEX-FEC/8000 Media Attribute (a): rtpmap:98 iLBC/8000 Media Attribute (a): rtpmap:101 telephone-event/8000 Media Attribute (a): sendrecv 192.162.10.224 ----> PROXY Request-Line: ACK sip:franco.callegati@85.18.14.25:42214;rinstance=96888d44783df4a0 SIP/2.0 Message Header Via: SIP/2.0/UDP 192.168.10.224:64244 ;branch=z9hG4bK-d87543-66641951d8357408-1--d87543- Max-Forwards: 70 Route: <sip:PROXY_IP:5060;lr;nat=yes;ftag=4554424c> Contact: <sip:daniel.grotti@192.168.10.224:64244> To: "franco.callegati"<sip:franco.callegati@PROXY_IP>;tag=d06d8b2d From: "casa"<sip:daniel.grotti@PROXY_IP>;tag=4554424c Call-ID: YjRmZjU3ODAwMjIxMDU0MDUwNDllYzUwNmZiYTJjMmE. CSeq: 2 ACK Proxy-Authorization: Digest username="1000",realm="PROXY_IP",nonce="47593c9fa32034a66fdb7493ff499c7215d4d8db",uri="sip: franco.callegati@PROXY _IP",response="82d21af18029aa02388869088c3619d2",algorithm=MD5 User-Agent: X-Lite release 1011s stamp 41150 Content-Length: 0 RTP STREAM BETWEEN CLIENTS (MEDIAPROXY DOESN'T WORK) CALL ENDED ---------------------------------------------------------------------------------------------------------------------- this is my config file: debug=3 fork=yes log_stderror=yes listen=PROXY_IP port=5060 children=4 dns=no rev_dns=no disable_dns_blacklist=yes mpath="/usr/SER_proxy//lib/openser/modules/" #------------------------------------------------------ # Load Module #------------------------------------------------------ loadmodule "mysql.so" loadmodule "auth.so" loadmodule "auth_db.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "mi_fifo.so" loadmodule "uri.so" loadmodule "uri_db.so" loadmodule "domain.so" loadmodule "mediaproxy.so" loadmodule "nathelper.so" loadmodule "textops.so" loadmodule "xlog.so" loadmodule "cpl-c.so" loadmodule "alias_db.so" #---------------------------------------------------------- # Parameters #---------------------------------------------------------- modparam("auth_db|uri_db|usrloc|domain|alias_db", "db_url", " mysql://topenser:openserrw@localhost/topenser") modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) modparam("usrloc", "nat_bflag", 6) modparam("rr", "enable_full_lr", 1) modparam("alias_db", "use_domain", 1) # REGISTRAR MODULE modparam("registrar", "max_contacts", 2) # max number of contacts per URI modparam("registrar", "append_branches", 0) # if 0: R-URI will be overwritten with the highest-q rated contact and the rest will be left unprocessed. modparam("registrar", "default_q", 1000) # default contacts q-value set as 1 modparam("registrar", "received_avp","$avp(i:42)") # URI_DB MODULE modparam("uri_db", "use_uri_table", 1) # Specify if the "uri" table should be used for checkings instead of "subscriber" table # CPL MODULE modparam("cpl-c", "db_url", "mysql://topenser:openserrw@localhost/topenser") modparam("cpl-c", "cpl_table", "cpl") modparam("cpl-c", "cpl_dtd_file", "/usr/src/openser-1.2.2-notls /modules/cpl-c/cpl-06.dtd") modparam("cpl-c", "lookup_domain", "location") modparam("cpl-c","lookup_append_branches",1) modparam("cpl-c","proxy_route", 10) #NATHELPER MODULE modparam("nathelper", "rtpproxy_disable_tout", 120) modparam("nathelper", "rtpproxy_tout", 2) modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "received_avp", "$avp(i:42)") modparam("nathelper", "sipping_method", "OPTIONS") # Use OPTIONS every 10sec to keep NAT alive modparam("nathelper", "sipping_bflag", 6) modparam("nathelper", "sipping_from", "sip:PROXY_IP") #MEDIAPROXY MODULE modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy", "sip_asymmetrics", "/usr/local/etc/openser/sip-asymmetric-clients") modparam("mediaproxy", "rtp_asymmetrics", "/usr/local/etc/openser/rtp-asymmetric-clients") # TM MODULE modparam("tm", "fr_inv_timer", 120) #------------------------------------------------------------ #MAIN ROUTE #----------------------------------------------------------- route { xlog("L_DBG", "INFO: NEW REQUEST - METHOD=$rm R-URI=$ru FROM=$fu TO=$tu IP=$si ID=$ci\n"); #------------------------------------ # Sanity checks #------------------------------------ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too much Hops"); exit; }; if (msg:len >= 2048) { sl_send_reply("513", "Message too big"); exit; }; #------------------------------------ # RECORD-ROUTE #------------------------------------ if(method=="INVITE" && client_nat_test("7")) { record_route_preset ("PROXY_IP:5060;nat=yes"); xlog("L_DBG", "INFO: RECORD-ROUTE WITH NAT"); } else if (method!="REGISTER") { record_route(); }; #---------------------------------------- # CALL TEAR DOWN #---------------------------------------- if (method=="BYE") { end_media_session(); }; if (method=="CANCEL") { end_media_session(); }; #-------------------------------------------- # LOOSE ROUTE #-------------------------------------------- if (loose_route()) { xlog("L_DBG", "INFO: LOOSE ROUTE"); if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403","Unauthorized"); exit; }; consume_credentials(); if (client_nat_test("7") || search("^Route:.*nat=yes")) { setbflag(7); use_media_proxy(); }; }; route(1); exit; }; #------------------------------------------------- #CALL TYPE PROCESSING #------------------------------------------------- if (!uri==myself) { route(1); exit; }; if (uri==myself) { if (method=="REGISTER") { xlog("L_DBG", "INFO: REGISTER Message received"); route(2); exit; }; if (method=="ACK") { route(1); exit; }; if (method=="INVITE") { xlog("L_DBG", "INFO: INVITE Message received"); route(3); exit; }; if (method=="MESSAGE") { xlog("L_DBG", "INFO: MESSAGE method received"); route(4); exit; }; lookup("aliases"); if (!uri==myself) { route(1); exit; }; if (!lookup("location")) { sl_send_reply("404", "Destination not found"); exit; }; }; route(1); } #-------------------------------------------------------- # REGISTER PROCESSING #-------------------------------------------------------- route[2] { # Check credentials if(!www_authorize("","subscriber")) { www_challenge("","0"); exit; } else if(!check_to()) { sl_send_reply("401", "Unauthorized"); exit; }; consume_credentials(); # Check client natted - if yes, set flag 6 if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setbflag(6); xlog("L_DBG","INFO: Registration behind NAT"); xlog("L_DBG","INFO: Bflag 6, related to BRANCH=$T_branch_idx, is setted as $bf"); fix_nated_register(); force_rport(); }; if(!save("location")) { sl_reply_error(); xlog("L_DBG", "Registration of [$fU] Failed"); }; xlog("L_DBG", "INFO: Registration of [$fU] Complete."); xlog("L_DBG", "INFO: 200 OK has been sended"); } #---------------------------------------------------------- # INVITE PROCESSING #---------------------------------------------------------- route[3] { sl_send_reply("100", "Trying"); # Check if caller is natted, if yes set flag 7, rewrite Contact HF with Proxy address if(client_nat_test("7")) { setbflag(7); xlog("L_DBG", "INFO: CLIENT INVITE BEHIND NAT"); xlog("L_DBG","NOTICE: Bflag 7, related to BRANCH=$T_branch_idx of this INVITE, is setted as $bf"); if(force_rport()) { xlog("L_DBG","INFO: rport FORCED"); }; if(fix_nated_contact()) { xlog("L_DBG","INFO: Contact HF is now [$ct]"); }; # append_hf("P-hint: INVITE behind NAT \n"); }; # Check Credentials if(!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Unauthorized"); exit; }; lookup("aliases"); if(uri!=myself) { route(1); exit; }; consume_credentials(); # Check if r-URI is an alias. If yes, rewrite RURI with User's URI if(!alias_db_lookup("dbaliases")) { xlog("L_DBG", "The [$ru] is not an alias"); }; # Use Caller CPL "Outgoing" Script, if exist if(!cpl_run_script("outgoing", "force_stateful")) { sl_send_reply("500","Outgoing CPL script execution failed"); exit; }; # Find destination user and re-write R-URI with its Contact if (!lookup("location")) { sl_send_reply("404", "Destination not found"); exit; }; xlog("L_DBG", "INFO: LOCATION HAS BEEN FOUND"); xlog("L_DBG","INFO: R-URI is now [$ru]"); t_on_reply("1"); # Use CPL "Incoming" script of the destination client if(!cpl_run_script("incoming","force_stateful")) { sl_send_reply("500", "Incoming CPL script execution failed"); exit; }; route(11); route(1); } # -------------------------------- # PROXY ROUTE - CPL SCRIPT LOADED # -------------------------------- route[10] { xlog("L_DBG", "INFO: ROUTE 10 - PROXY ROUTE \n"); # append_hf("P-hint: CPL ROUTE 10 - PROXY-ROUTE\n"); if (isbflagset(6) || isbflagset(7)) { xlog("L_DBG", "INFO: flag 6 or 7 setted \n"); if(!isbflagset(8)) { setbflag(8); }; if(use_media_proxy()) { xlog("L_DBG","NOTICE: MEDIAPROXY in use for the CALLER!!"); # append_hf("P-hint: Mediaproxy in USE for the Caller\n"); }; }; } # ----------------------------- # CONTROL FLAG - NO CPL SCRIPT # ----------------------------- route[11] { xlog("L_DBG", "INFO: ROUTE 11 - NO CPL SCRIPT"); # append_hf("P-hint: ROUTE 11 \n"); if(isbflagset(6) || isbflagset(7)) { xlog("L_DBG", "INFO: flag 6 or 7 setted"); if(!isbflagset(8)) { setbflag(8); }; if(use_media_proxy()) { xlog("L_DBG","NOTICE: mediaproxy in use for the caller!!"); # append_hf("P-hint: MEDIAPROXY in USE for the CALLER\n"); }; }; } # -------------------------------------------------- # MESSAGE PROCESSING # -------------------------------------------------- route[4] { if (uri!=myself) { sl_send_reply ("403", "Forbidden"); exit; }; if (!lookup("location")) { sl_send_reply("404", "Destination not found"); exit; }; route(1); } #---------------------------------------------------- # RELEY ROUTE #---------------------------------------------------- route[1] { if (!t_relay("0x01")) # don't send 100 trying { if (method=="INVITE" || method=="ACK") { end_media_session(); xlog("L_DBG","INFO: MEDIA SESSION ENDED"); }; sl_reply_error(); xlog("L_DBG", "INFO: SENT ERROR REPLY"); }; } #--------------------------------------------------------------------- # On Reply Route #--------------------------------------------------------------------- onreply_route[1] { xlog("L_DBG","INFO : ONREPLY ROUTE"); # append_hf("P-hint: ONREPLY ROUTE \n"); if (status=~"(180)|(183)|2[0-9][0-9]") { if (isbflagset(8) && !search("^Content-Lenght:[ ]*0")) { if(use_media_proxy()) { xlog("L_DBG","INFO: MEDIAPROXY in use for the CALLED!"); # append_hf("P-hint: Media Proxy in use for the Callee!\n"); }; }; }; if (client_nat_test("7") && status=~"(180)|(183)|(200)") { fix_nated_contact(); xlog("L_DBG","INFO: CONTACT HF has been CHANGED"); # append_hf("P-hint: CALLEE'S CONTACT HF has benn CHANGED\n"); }; } ---------------------------------------------------------------------------------------------------------------------- Regards, Daniel Hi Daniel, Can u post your openser configuration as well as a complete ngrep trace for the calls you have problems with? DanB -- Daniel Grotti ________________________ e-mail : d.grotti(a)gmail.com

3 3

[Serusers] ser and rtpproxy bridging
by mashudi 10 Dec '07

10 Dec '07

Hi all, I'm going to setup ser 0.9.6 for bridging two vpn network 10.12.12.0/24 and 10.177.10.0/24 using rtpproxy and a pstn gateway 10.177.10.60 , if some one can have any sample configuration of some good guide to configure. Please help. best regards, mashudi

1 0

[OpenSER-Users] openxcap Problem
by Schumann Sebastian 10 Dec '07

10 Dec '07

Dear all I have a big problem with openxcap. I don't get it work :( As I saw on their webpage, this mailing list can be posted for this concern as well. I am using version 0.9.3 and acc. the installation file on http://www.openxcap.org all current dependencies from the Debian unstable distribution. When I start /usr/bin/openxcap, the following error occurs in the syslog: Sep 25 17:01:21 openxcap openxcap[11876]: [-] Log opened. Sep 25 17:01:21 openxcap openxcap[11876]: [-] Starting Open XCAP 0.9.3 Sep 25 17:01:27 openxcap openxcap[11876]: [-] Traceback (most recent call last): Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/bin/openxcap", line 56, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.server import XCAPServer Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/server.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap import authentication Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/authentication.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.appusage import getApplicationForURI Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 466, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] applications = {'xcap-caps': XCAPCapabilitiesApplication(), Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 64, in __init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] self.xml_schema = etree.XMLSchema(xml_schema_doc) Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "xmlschema.pxi", line 67, in etree.XMLSchema.__init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] etree.XMLSchemaParseError: Document is not valid XML Schema As I wrote, I followed all instructions from the openxcap webpage but didn't find any hints how to make it work. Any help on that would be appreciated. Best regards Sebastian -- Sebastian Schumann Diploma Student Architecture and Design Department Slovak Telekom, a. s. T-Com, Operations Unit Production and Service Division Innovations and Enterprise Solution Subunit Address: Namestie Slobody 6, 817 62 Bratislava, Slovakia Office: Room 449, Jarabinkova 1, 821 09 Bratislava, Slovakia +421 2 588 13332 (tel) +421 910 643010 (mobile) +49 175 1925928 (mobile) sebastian.schumann(a)t-com.sk http://www.t-com.sk <http://www.t-com.sk/>

4 3

Re: [OpenSER-Users] auth_db module - get_ha1(): Error while querying database
by Daniel-Constantin Mierla 10 Dec '07

10 Dec '07

Hello, can you please send unified format for the patch? diff -u oldfile newfile Thanks, Daniel On 12/10/07 14:29, Mihail Gluhowchenko wrote: > Hello; > Here it is sc.patch; > my version is 'openser-1.2.2-notls' > -- > Regards, > Mihail Gluhowchenko. > Enterprise ELTEX. > > 2007/12/10, Daniel-Constantin Mierla < daniel(a)voice-system.ro > <mailto:daniel@voice-system.ro>>: > > > > On 12/10/07 07:04, Mihail Gluhowchenko wrote: > > Hello all work; :) > was your version old or there is a bug in sc.dbtext? Can you post the > patch of changes? > > Best regards, > Daniel > > > > in script sc.dbtext use old format subscriber. > > Little changes and all work > > > > date_now=$(date +"%s") > > GLOB_ID=$(od -N4 -d /dev/random | head -n1 | cut -d' ' -f2,3 | > sed -e > > 's/ //') > > > > add) > > if [ $# -ne 4 ] ; then > > usage > > exit 1 > > fi > > shift > > credentials $1 $2 > > is_user $1 > > if [ $? -eq 0 ] ; then > > echo -e "\nuser already exists\n" > > exit 1 > > fi > > #Add to SUBSCRIBER file > > #id(int,auto) username(str) domain(str) > password(str) > > first_name(str,null) last_name(str,null) email_address(str) > > datetime_created(int) last_modified(int) ha1(str) ha1b(str) > > rpid(str,null) > > > > > line="$GLOB_ID:$SERUSER:$SERDOMAIN:$2:::$3:$date_now:$date_now:$HA1:$HA1B:" > > > echo $line >> $SUB_FILE > > #Add to URI file > > #id(int,auto) domain(str) uri_user(str) > > last_modified(int) > > line="$GLOB_ID:$SERDOMAIN:$SERUSER:$date_now" > > echo $line >> $URI_FILE > > echo -e "\nNew user ($SERUSER@$SERDOMAIN) added to > > DBTEXT files\n" > > ;; > > -- > > Regards, > > Mihail Gluhowchenko. > > Enterprise ELTEX. > > > >

1 0

[Serusers] Problem for compiling with LCR
by Gerson A. Matiolli 10 Dec '07

10 Dec '07

Hi all I am compiling the SER-0.96 that downloaded the cvs with following command: make include_modules="mysql lcr" modules The following error occurred: make[1]: Entrando no diretÃ³rio `/home/ser/sip_router/modules/mysql' make[1]: `mysql.so' estÃ¡ atualizado. make[1]: Saindo do diretÃ³rio `/home/ser/sip_router/modules/mysql' make[1]: Entrando no diretÃ³rio `/home/ser/sip_router/modules/lcr' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -minline-all-stringops -falign-loops -ftree-vectorize -mtune=athlon64 -Wall -DNAME='"ser"' -DVERSION='"2.1.0-dev13"' -DARCH='"i386"' -DOS='linux_' -DOS_QUOTED='"linux"' -DCOMPILER='"gcc 4.1.2"' -D__CPU_i386 -D__OS_linux -DSER_VER=2001000 -DCFG_DIR='"/usr/local/etc/ser/"' -DMODS_DIR='"/usr/local/lib/ser/modules/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DUSE_DNS_CACHE -DUSE_DNS_FAILOVER -DUSE_DST_BLACKLIST -DUSE_NAPTR -DUSE_TLS -DTLS_HOOKS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_SCHED_SETSCHEDULER -DHAVE_EPOLL -DHAVE_SIGIO_RT -DSIGINFO64_WORKARROUND -DUSE_FUTEX -DHAVE_SELECT -c lcr_mod.c -o lcr_mod.o In file included from ../mysql/dbase.h:42, from lcr_mod.c:53: ../mysql/../../db/db_val.h:40: error: redeclaration of enumerator âDB_INTâ ../../db/db_fld.h:47: error: previous definition of âDB_INTâ was here ../mysql/../../db/db_val.h:41: error: redeclaration of enumerator âDB_FLOATâ ../../db/db_fld.h:48: error: previous definition of âDB_FLOATâ was here ../mysql/../../db/db_val.h:42: error: redeclaration of enumerator âDB_DOUBLEâ ../../db/db_fld.h:49: error: previous definition of âDB_DOUBLEâ was here ../mysql/../../db/db_val.h:44: error: redeclaration of enumerator âDB_STRâ ../../db/db_fld.h:51: error: previous definition of âDB_STRâ was here ../mysql/../../db/db_val.h:45: error: redeclaration of enumerator âDB_DATETIMEâ ../../db/db_fld.h:52: error: previous definition of âDB_DATETIMEâ was here ../mysql/../../db/db_val.h:46: error: redeclaration of enumerator âDB_BLOBâ ../../db/db_fld.h:53: error: previous definition of âDB_BLOBâ was here ../mysql/../../db/db_val.h:48: error: redeclaration of enumerator âDB_BITMAPâ ../../db/db_fld.h:55: error: previous definition of âDB_BITMAPâ was here lcr_mod.c:118: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âlcr_dbfâ lcr_mod.c: In function âlcr_db_initâ: lcr_mod.c:242: error: âlcr_dbfâ undeclared (first use in this function) lcr_mod.c:242: error: (Each undeclared identifier is reported only once lcr_mod.c:242: error: for each function it appears in.) lcr_mod.c: In function âlcr_db_bindâ: lcr_mod.c:260: warning: implicit declaration of function âbind_dbmodâ lcr_mod.c:260: error: âlcr_dbfâ undeclared (first use in this function) lcr_mod.c:266: warning: implicit declaration of function âDB_CAPABILITYâ lcr_mod.c:266: error: âDB_CAP_QUERYâ undeclared (first use in this function) lcr_mod.c:272: error: âDB_CAP_RAW_QUERYâ undeclared (first use in this function) lcr_mod.c: In function âlcr_db_closeâ: lcr_mod.c:284: error: âlcr_dbfâ undeclared (first use in this function) lcr_mod.c: In function âlcr_db_verâ: lcr_mod.c:296: error: âlcr_dbfâ undeclared (first use in this function) lcr_mod.c:305: warning: implicit declaration of function âtable_versionâ lcr_mod.c: In function âreload_gwsâ: lcr_mod.c:503: error: âdb_row_tâ undeclared (first use in this function) lcr_mod.c:503: error: ârowâ undeclared (first use in this function) lcr_mod.c:518: error: âlcr_dbfâ undeclared (first use in this function) lcr_mod.c:534: warning: implicit declaration of function âRES_ROW_Nâ lcr_mod.c:542: warning: implicit declaration of function âRES_ROWSâ lcr_mod.c:543: warning: implicit declaration of function âROW_VALUESâ lcr_mod.c:543: error: invalid type argument of â->â lcr_mod.c:549: error: invalid type argument of â->â lcr_mod.c:550: error: invalid type argument of â->â lcr_mod.c:553: error: invalid type argument of â->â lcr_mod.c:561: error: invalid type argument of â->â lcr_mod.c:564: error: invalid type argument of â->â lcr_mod.c:572: error: invalid type argument of â->â lcr_mod.c:575: error: invalid type argument of â->â lcr_mod.c:584: error: invalid type argument of â->â lcr_mod.c:588: error: invalid type argument of â->â lcr_mod.c: In function âload_gwsâ: lcr_mod.c:636: error: âdb_row_tâ undeclared (first use in this function) lcr_mod.c:636: error: ârowâ undeclared (first use in this function) lcr_mod.c:636: error: ârâ undeclared (first use in this function) lcr_mod.c:636: warning: left-hand operand of comma expression has no effect lcr_mod.c:698: error: âlcr_dbfâ undeclared (first use in this function) lcr_mod.c:705: error: invalid type argument of â->â lcr_mod.c:709: error: invalid type argument of â->â lcr_mod.c:712: error: invalid type argument of â->â lcr_mod.c:714: error: invalid type argument of â->â lcr_mod.c:717: error: invalid type argument of â->â lcr_mod.c:719: error: invalid type argument of â->â lcr_mod.c:722: error: invalid type argument of â->â lcr_mod.c:724: error: invalid type argument of â->â lcr_mod.c:727: error: invalid type argument of â->â lcr_mod.c:729: error: invalid type argument of â->â lcr_mod.c:733: error: invalid type argument of â->â make[1]: ** [lcr_mod.o] Erro 1 make[1]: Saindo do diretÃ³rio `/home/ser/sip_router/modules/lcr' make: ** [modules] Erro 1 Somebody help me Tanks

1 0

[Serusers] Loading attributes question
by Steven C. Blair 10 Dec '07

10 Dec '07

I have a locally defined table with attributes which may contain several values. I define each attribute /value pair as a new entry in the table then use avp_load to retrieve these values from the database. The problem is that I don't know how to retrieve the values in a specific order. For example if I have a=1, a=2, a=3 when I load the values for "a" they may be 2,1,3 or 3,1,2, etc. Is there any way to force loading in a specific sequence. Thanks,Steve

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users