- sr-users - kamailio.org

TLS to UDP translation
by 赵国杰 07 Jun '17

07 Jun '17

Hi everyone, I have a kamailio server with TLS enabled. I need to forword UAC request to a PSTN gateway which only support UDP. Is it possible that kamailio can translate this with proper configuration? How can i do this? many thanks Jesse

2 5

Using reserved keywords in cfg variables
by Paul Claudiu Boriga 07 Jun '17

07 Jun '17

Hello all, We found out that when using cfg variables certain keywords are not allowed, and Kamailio logs a generic error: <core> [cfg.y:3368]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 256, column 9-14: syntax error For example we cannot use words like enable/disable for var name or group name but we can use disabled or enabled: group_name.enable = 1 descr "test variable" Looking into the cfg.lex file, I noticed that these are keywords which will be interpreted as values (I don't have too much experience with flex/bison so I am not sure I got this right). We have been using Kamailio 4.4 to test this, but I think it is not specific to a version. Is this behavior documented somewhere? If not, where should it be documented? Also can we have a more specific log message in this case? Thank you, Claudiu Boriga.

2 6

Issue with Dispatcher Failover algorithm
by Cristi Constantin 07 Jun '17

07 Jun '17

Hello, I have an issue with the behavior of ds_select_dst() method in case of using algorithm 8 (dispatch based on priority). In case both destinations are available, they are used alternatively, instead of always using the one with the highest priority. By searching through the mailing list I found that the lower the priority number, the higher the priority (1 is first, 2 is second, etc.). Based on this, I set the following in dispatcher.list: 7 sip:10.126.54.51:5060;transport=sctp 9 1 7 sip:10.126.55.51:5060;transport=sctp 9 2 After running "kamcmd dispatcher.reload" and "kamcmd dispatcher.list", I have the confirmation that the priorities are correctly set: SET: { ID: 7 TARGETS: { DEST: { URI: sip:10.126.55.51:5060 ;transport=sctp FLAGS: AP PRIORITY: 2 } DEST: { URI: sip:10.126.54.51:5060 ;transport=sctp FLAGS: AP PRIORITY: 1 } } } The dispatcher settings from kamailio.cfg is the following: modparam("dispatcher", "list_file", "/etc/kamailio/dispatcher.list") modparam("dispatcher", "flags", 2) modparam("dispatcher", "ds_ping_interval", 10) modparam("dispatcher", "ds_ping_method", "OPTIONS") modparam("dispatcher", "ds_ping_from", "sip:kamailio@sdp-t-lb2") modparam("dispatcher", "ds_probing_mode", 3) modparam("dispatcher", "dst_avp", "$avp(AVP_DST)") modparam("dispatcher", "grp_avp", "$avp(AVP_GRP)") modparam("dispatcher", "cnt_avp", "$avp(AVP_CNT)") modparam("dispatcher", "sock_avp", "$avp(AVP_SOCK)") And the code which should do the displatch is the following: if (ds_is_from_list(7, 3, "$ru")) { remove_hf("Route"); if(!ds_select_dst("7", "8")) { send_reply("404", "No destination"); exit; } } With the settings above, I was expecting to always have the messages delivered to 10.126.54.51. Instead, they are dispathed to 10.126.54.51 and 10.126.55.51 alternatively. Thanks a lot, Cristian

6 15

Kamailio / Docker
by sain hassam caicedo 07 Jun '17

07 Jun '17

Dear Kamailio, My name is Sain, I from Colombia. I wonder if is possible to use Kamailio with Docker in Ubuntu 16 ? Also, respectfully do you have an easy installation manual or any recommendation to start doing some testing? I am interesting to learn more about Kamailio . Thank you very much

2 1

Auth_radius - digest auth problem
by Donat Zenichev 06 Jun '17

06 Jun '17

Hi all. Have a problem with radius authorization. I'm using auth_radius.so modparams, only path to client file: modparam("auth_radius", "radius_config", "/etc/radiusclient/radiusclient.conf") Freeradius installed and is working properly, radtest authentication from kamailio host succeed . How authorization block looks like: if (!is_present_hf("Authorization")) { xlog("L_NOTICE", "----- Athorization HF is not found - passing the challenge -----\n"); if (nat_uac_test("2")) { force_rport(); } www_challenge("$fd", "1"); exit; if (!radius_www_authorize("$fd","$fU")) { if (nat_uac_test("2")) { force_rport(); } xlog("L_NOTICE", "----- Registeration $au@$ar ($fU) from $si:$sp Rejected. Code: $rc -----\n"); sl_send_reply("401","Unauthorized"); exit; Radius log is filled by rows like: Auth: [digest] Cleartext-Password or Digest-HA1 is required for authentication. Tried to use radius_www_authorize without $fU - didn't change anything. Tried to use www_challenge without qop - didn't change anything. So, this solution is quite simple, but I have a fail while digest authentication. Any ideas? -- -- BR, Donat Zenichev Wnet VoIP team Tel: +380(44) 5-900-808 http://wnet.ua

4 8

Any document to study and develop kamailio
by sgy 06 Jun '17

06 Jun '17

Hi All, I can't find any document(PDF) to study and develop kamailio, do someone show me where it is. thank you -- Best Regards, Shengy

3 3

Kamailio 4.4.4 crash in tcp_read_headers()
by Armen Babikyan 06 Jun '17

06 Jun '17

Hello, Over the past few months, I've seen a smattering of kamailio crashes on various systems with identical backtraces: SIGSEGV in tcp_read_headers(), at tcp_read.c line 628. Example here: https://pastebin.com/qJ3ypnVz Note that in frame 0, print *c shows that req->parsed is pointing to an address exactly 8GB lower than req->buf. That req->parsed is pointing to an invalid memory location, crashing kamailio when the location is dereferenced. In other coredumps, I see that req->parsed is pointing to an address exactly 4GB lower than req->buf. Other info: This is Kamailio 4.4.4 on x86_64. I've not had success trying to reproduce this yet. Also worth noting that the crashes seem to be consistently associated with processing traffic from a UA connected over SIP/TCP; I've seen no other transport associated with this crash. Thoughts are welcome. Thanks! Armen

2 3

Rtpproxy didn't work
by sgy 03 Jun '17

03 Jun '17

I install rtpproxy and config as follow, but it didn't work, is my config OK ? errorlog: Jun 3 15:00:56 iZ2ze3uk97m2bfv681kyx4Z /usr/local/sbin/kamailio[28971]: ERROR: rtpproxy [rtpproxy.c:2552]: force_rtp_proxy(): incorrect port 0 in reply from rtp proxy Jun 3 15:00:58 iZ2ze3uk97m2bfv681kyx4Z /usr/local/sbin/kamailio[28971]: ERROR: rtpproxy [rtpproxy.c:2552]: force_rtp_proxy(): incorrect port 0 in reply from rtp proxy My config: PUB_IP: public ip of kamailio PVT_IP: private ip of kamailio 1. start rtpproxy rtpproxy -l PUB -s udp:localhost:7722 -F 2. kamailio.cfg #!define WITH_MYSQL #!define WITH_AUTH #!define WITH_ALIASDB #!define WITH_USRLOCDB #!define WITH_NAT listen=PVT_IP modparam("rtpproxy", "rtpproxy_sock", "udp:localhost:7722") -- Best Regards, Shengy

3 3

Rtpproxy didn't work
by sgy 03 Jun '17

03 Jun '17

I install rtpproxy and config as follow, but it didn't work, is my config OK ? My config: PUB_IP: public ip of kamailio PVT_IP: private ip of kamailio 1. start rtpproxy rtpproxy -l PUB -s udp:localhost:7722 -F 2. kamailio.cfg #!define WITH_MYSQL #!define WITH_AUTH #!define WITH_ALIASDB #!define WITH_USRLOCDB #!define WITH_NAT listen=PVT_IP modparam("rtpproxy", "rtpproxy_sock", "udp:localhost:7722") -- Best Regards, Shengy

1 0

Adding debugger module to kazoo-kamailio
by Joe Baran 02 Jun '17

02 Jun '17

I’m hoping that someone might have some suggestions on how to approach this. I’ve been working with kamailio as part of kazoo (via RPM install) and have been attempting to add the debugger module so I can trace things as they pass through kamailio. However, I need some help in determining the most effective way of adding this. Has anyone already done this / have any suggestions? Thanks, Joe

2 1

topos module - possible bug
by Pete Kelly 02 Jun '17

02 Jun '17

Hi I am using the topos module when bridging 2 networks with Kamailio. The INVITE/200OK part of the transaction is working fine (i.e. the Contact on both sides matches correctly the corresponding network). However when the ACK is sent into Kamailio, instead of realising the next hop is myself and skipping it, Kamailio is sending the ACK directly to itself as a packet, causing the call setup to break. Does anyone have any advice for this situation?

3 34

Kamctl does not work. Kamailio 4.4
by Denys Pozniak 02 Jun '17

02 Jun '17

Hello! I have installed Kamailio 4.4 on CentOS7 from repo. ( http://download.opensuse.org/repositories/home:/kamailio:/v4.4.x-rpms/CentO… ) When I try to run kamctl I have next error: # kamctl ps WARNING: no control engine found - tried 'RPCFIFO' ERROR: This command requires a control engine - none was loaded Kamcmd works well: # kamcmd ps 20591 main process - attendant 20595 udp receiver child=0 sock=10.10.54.53:5080 20596 udp receiver child=1 sock=10.10.54.53:5080 20597 udp receiver child=2 sock=10.10.54.53:5080 20598 udp receiver child=3 sock=10.10.54.53:5080 20599 slow timer 20600 timer 20601 secondary timer 20602 ctl handler 20603 MI FIFO Whats missing with kamctl and how to force it working? Configs are below. BR, Denys #cat /etc/kamailio/kamctlrc DBENGINE=MYSQL DBHOST=127.0.0.1 DBNAME=kamailio DBRWUSER="root" DBRWPW="toor" DBROUSER="root" DBROPW="toor" DBACCESSHOST=127.0.0.1 DBROOTUSER="root" #cat /etc/modules.cfg #!KAMAILIO debug=2 log_stderror=no memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=4 disable_tcp=yes listen=udp:10.77.254.53:5080 auto_aliases=no alias = "domain.local" mpath="/lib64/kamailio/modules/" loadmodule "tm.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "sl.so" loadmodule "maxfwd.so" loadmodule "nathelper.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "path.so" loadmodule "outbound.so" loadmodule "stun.so" loadmodule "db_mysql.so" loadmodule "lcr.so" loadmodule "avpops.so" loadmodule "ctl.so" loadmodule "mi_fifo.so" loadmodule "mi_rpc.so"

2 2

relationship between debian kamailio.service and kamailio.init
by Juha Heinanen 02 Jun '17

02 Jun '17

Could someone who knows about systemd tell, what is the relationship between deb/stretch kamailio.service and kamailio.init files? kamailio.service contains kamailio binary argument values and command to start kamailio, but kamailio.init does much more. Why do both exist? -- Juha

1 0

RTPEngine a=rtcp-mux
by Igor Olhovskiy 02 Jun '17

02 Jun '17

Hi! I’m trying to make RTPEngine to work with calls Browser <-> SIP. Call From SIP to Browser working perfectly, but when calling to SIP from Browser, on 200 OK (sdp) I don’t receive ... a=rtcp-mux ... lines, but it was told to RTPEngine on reply_route to add this. And this line is mandatory for me, cause I don’t control JS softphone on other side Reply route in a case of Browser->SIP call looks like reply_route[REPLY_R] { … rtpengine_answer("internal external UDP/TLS/RTP/SAVPF ICE=force rtcp-mux-offer"); ... } Also I’ve tried with rtcp-mux-accept but still no luck Regards, Igor

2 3

Multiple c params in SDP
by Grant Bagdasarian 02 Jun '17

02 Jun '17

Hi, We're currently using Kamailio 4.4.1 with RTPENGINE and one of our clients is sending an INVITE with two c params in the SDP, one in the Session Description, one in the Media Description. When Kamailio contacts RTPENGINE to request a port, only the IP (c param) in the Media Description is changed. The next hop, which is a Freeswitch, in turn sends the RTP stream to the IP in the Session Description. Has anyone experienced this behavior? Is it possible to change both IP (c param) in the Session and Media Description? Regards, Grant

2 2

Mysql driver error Table was not locked with LOCK TABLES
by Arsen 02 Jun '17

02 Jun '17

Hi guys, Maybe someone can share a quick tip how we can fix this issue? /usr/local/sbin/kamailio[24268]: ERROR: db_mysql [km_dbase.c:128]: db_mysql_submit_query(): driver error on query: Table 'sip_trace' was not locked with LOCK TABLES (1100) /usr/local/sbin/kamailio[24268]: ERROR: <core> [db_query.c:235]: db_do_insert_cmd(): error while submitting query /usr/local/sbin/kamailio[24268]: ERROR: siptrace [siptrace.c:859]: sip_trace_store_db(): error storing trace Kamailio 4.4.0 installed from git. Database created with kamdbctl. Thanks! -- Regards, Arsen Semionov cell: +442035198881

2 2

SDP rewrite causing extra IP to be inserted.
by Steven Meyer 02 Jun '17

02 Jun '17

I have an SDP rewrite and it is adding a duplicate IP to the connection address. c=IN IP4 WWW.XXX.YY.ZZWWW.XXX.YY.ZZ route[TOFUSIONPBX] { route(DISPATCH); #Set the reply to handle sdp rewrite xlog("L_INFO","route[TOFUSIONPBX]: Inside the TOFUSIONPBX"); #t_relay(); route(RELAY); exit; } route[CHANGE_SDP] { xlog("L_INFO","In the CHANGE_SDP Route"); if (has_body("application/sdp") ) { xlog("L_INFO","On reply from the FUSIONPBX, which changes the SDP"); if (route(FROMFUSIONPBX)) { fix_nated_sdp("2","LOAD_BALANCER_PUBLIC_ADDRESS"); } } }

2 1

Re: [SR-Users] rtpengine nattede WAN address
by Mititelu Stefan 02 Jun '17

02 Jun '17

Cool. --- Stefan On Jun 1, 2017 10:46 PM, "gerry kernan" <gerry.kernan(a)infinityit.ie> wrote: Thanks Stefan That's sorted my issue Gerry Sent from my iPhone On 1 Jun 2017, at 09:25, Mititelu Stefan <stefan.mititelu92(a)gmail.com> wrote: Hi gerry, 1. The rtpengine is running on the same machine as kamailio? (From --interface=192.X.X.148!X.X.X.X , I guess so..) 2. Can you paste the rtpengine_offer/rtpengine_answer you are using in Kamailio config? I remember trying this approach which worked for me: - set interface = external/192.X.X.148!X.X.X.X;internal/192.X.X.148 - use rtpengine_manage() in Kamailio config with "direction=external direction=internal" for incoming calls - use rtpengine_manage() in Kamailio config with "direction=internal direction=external" for outgoing calls Give it a try! :) --- Stefan On Wed, May 31, 2017 at 6:31 PM, gerry kernan <gerry.kernan(a)infinityit.ie> wrote: > Hi > > > > I’m looking to check if what I’m trying to configure is feasible . > > > > UA -> WAN(X.X.X.X) -> Kamailio(LAN 192.X.X.148) -> internal PBX(LAN > 192.X.X.131) > > > > I have a WN IP forwarded to and internal Kamailio server which is sitting > in front of an asterisk server. SIP requests are sent to asterisk from > Kamailio via dispatcher . > > SIP client can register via WAN and Kamailio to asterisk , I have rtpenine > configured as below. > > > > /usr/sbin/rtpengine --interface=192.X.X.148!X.X.X.X --listen-ng=7722 > --timeout=60 --silent-timeout=3600 --pidfile=/var/run/ngcp-rtpengine-daemon.pid > --table=0 --log-level=6 --log-facility=local7 --log-facility-rtcp=local7 > --homer=192.168.200.5:9060 --homer-protocol=udp --homer-id=2002 > > > > > > But SIP SDP when sent to asterisk is still show the WAN IP of the Sip > client in the SDP offer that goes to asterisk , ive tried adding parameter “*via-branch=” > **and “**auto-bridge” **to rtpengine_offer but they don’t seem to make a > difference , is there anyone way I can force the SDP offer that goes to the > backend PBX to use the IP of Kamailio server that rtpengine is running on > rather that the WAN IP that I’m advertising(X.X.X.X) ?* > > > > > > > > Example SIP SDP from WAN client to asterisk > > > > *INVITE* sip:*97@sip.domain.com;transport=UDP SIP/2.0 > > Via: SIP/2.0/UDP Client-IP:29345;branch= > *z9hG4bK-524287-1---e38082af1f110ad1*;rport Max-Forwards: 70 > > Contact: <sip:21@Client-IP:29345;transport=UDP> To: <sip:* > 97(a)sip.domain.com;transport=UDP> > > From: <sip:21@sip.domain.com;transport=UDP>;tag=*e637343b* > > Call-ID: *jvqeIB9f48_OGcTq0UxP7w..* > > CSeq: 2 *INVITE* Allow: *INVITE*, ACK, CANCEL, BYE, NOTIFY, REFER, > MESSAGE, OPTIONS, INFO, SUBSCRIBE > > Content-Type: application/sdp > > User-Agent: Zoiper rv2.8.40 > > o=Z > > 0 0 IN IP4 Client-IP > > s=Z > > c=IN IP4 Client-IP > > t=0 0 > > m=audio 29344 RTP/AVP 8 0 101 > > a=rtpmap:101 telephone-event/8000 > > a=fmtp:101 0-16 > > a=sendrecv > > > > and SDP that Kamailio sends to asterisk > > > > *INVITE* sip:*97@sip.domain.com;transport=UDP SIP/2.0 > > Record-Route: <sip:192.X.X.148;lr> > > Via: SIP/2.0/UDP 192.X.X.148;branch= > *z9hG4bKd924.bcc4248735b53e9cf783c87c81dfee28.0* > > Via: SIP/2.0/UDP Client-IP:29345;received=Clien > t-IP;branch=z9hG4bK-524287-1---e38082af1f110ad1;rport=29345 Max-Forwards: > 69 > > Contact: <sip:21@Client-IP:29345;transport=UDP> To: <sip:* > 97(a)sip.domain.com;transport=UDP> > > From: <sip:21@sip.domain.com;transport=UDP>;tag=*e637343b* > > Call-ID: *jvqeIB9f48_OGcTq0UxP7w..* > > CSeq: 2 *INVITE* Allow: *INVITE*, ACK, CANCEL, BYE, NOTIFY, REFER, > MESSAGE, OPTIONS, INFO, SUBSCRIBE > > Content-Type: application/sdp User-Agent: Zoiper rv2.8.40 > > Path: <sip:192.X.X.148;lr;received=sip:Client-IP:29345> > > v=0 > > o=Z 0 0 IN IP4 Client-IP > > s=Z c=IN IP4 X.X.X.X > > t=0 0 > > m=audio 32550 RTP/AVP 8 0 101 > > a=rtpmap:101 telephone-event/8000 > > a=fmtp:101 0-16 > > a=sendrecv > > a=rtcp:32551 > > a=ice-ufrag:Dwd23Dem > > a=ice-pwd:9Itp6Cq7lkYJxMkeDeA1I2kkzw > > a=candidate:KZyzUR5lXJJpt1Et 1 UDP 2130706431 X.X.X.X 32550 typ host > a=candidate:KZyzUR5lXJJpt1Et 2 UDP 2130706430 X.X.X.X 32551 typ host > > > > *Gerry Kernan* > > > > <image001.jpg> > > > > *Infinity IT | 17 The Mall | Beacon Court | Sandyford | > Dublin D18 E3C8 | Ireland* > > *Tel: +353 - (0)1 - 293 0090 <+353%201%20293%200090> | E-Mail: * > gerry.kernan(a)infinityit.ie > > > > *Managed IT Services Infinity IT* - www.infinityit.ie > > *IP Telephony Asterisk Consulting* – > www.asteriskconsulting.com > > *Contact Centre Total Interact* – www.totalinteract.com > > > > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users(a)lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

1 0

[--SPAM--] Document #85882
by Adolfo Kelly 02 Jun '17

02 Jun '17

Dear Customer, to read your document please open the attachment and reply as soon as possible. Kind regards, GGV Customer Support

1 0

rtpengine nattede WAN address
by gerry kernan 01 Jun '17

01 Jun '17

Hi I'm looking to check if what I'm trying to configure is feasible . UA -> WAN(X.X.X.X) -> Kamailio(LAN 192.X.X.148) -> internal PBX(LAN 192.X.X.131) I have a WN IP forwarded to and internal Kamailio server which is sitting in front of an asterisk server. SIP requests are sent to asterisk from Kamailio via dispatcher . SIP client can register via WAN and Kamailio to asterisk , I have rtpenine configured as below. /usr/sbin/rtpengine --interface=192.X.X.148!X.X.X.X --listen-ng=7722 --timeout=60 --silent-timeout=3600 --pidfile=/var/run/ngcp-rtpengine-daemon.pid --table=0 --log-level=6 --log-facility=local7 --log-facility-rtcp=local7 --homer=192.168.200.5:9060 --homer-protocol=udp --homer-id=2002 But SIP SDP when sent to asterisk is still show the WAN IP of the Sip client in the SDP offer that goes to asterisk , ive tried adding parameter "via-branch=" and "auto-bridge" to rtpengine_offer but they don't seem to make a difference , is there anyone way I can force the SDP offer that goes to the backend PBX to use the IP of Kamailio server that rtpengine is running on rather that the WAN IP that I'm advertising(X.X.X.X) ? Example SIP SDP from WAN client to asterisk INVITE sip:*97@sip.domain.com;transport=UDP SIP/2.0 Via: SIP/2.0/UDP Client-IP:29345;branch=z9hG4bK-524287-1---e38082af1f110ad1;rport Max-Forwards: 70 Contact: <sip:21@Client-IP:29345;transport=UDP> To: <sip:*97@sip.domain.com;transport=UDP> From: <sip:21@sip.domain.com;transport=UDP>;tag=e637343b Call-ID: jvqeIB9f48_OGcTq0UxP7w.. CSeq: 2 INVITE Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, MESSAGE, OPTIONS, INFO, SUBSCRIBE Content-Type: application/sdp User-Agent: Zoiper rv2.8.40 o=Z 0 0 IN IP4 Client-IP s=Z c=IN IP4 Client-IP t=0 0 m=audio 29344 RTP/AVP 8 0 101 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=sendrecv and SDP that Kamailio sends to asterisk INVITE sip:*97@sip.domain.com;transport=UDP SIP/2.0 Record-Route: <sip:192.X.X.148;lr> Via: SIP/2.0/UDP 192.X.X.148;branch=z9hG4bKd924.bcc4248735b53e9cf783c87c81dfee28.0 Via: SIP/2.0/UDP Client-IP:29345;received=Client-IP;branch=z9hG4bK-524287-1---e38082af1f110ad 1;rport=29345 Max-Forwards: 69 Contact: <sip:21@Client-IP:29345;transport=UDP> To: <sip:*97@sip.domain.com;transport=UDP> From: <sip:21@sip.domain.com;transport=UDP>;tag=e637343b Call-ID: jvqeIB9f48_OGcTq0UxP7w.. CSeq: 2 INVITE Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, MESSAGE, OPTIONS, INFO, SUBSCRIBE Content-Type: application/sdp User-Agent: Zoiper rv2.8.40 Path: <sip:192.X.X.148;lr;received=sip:Client-IP:29345> v=0 o=Z 0 0 IN IP4 Client-IP s=Z c=IN IP4 X.X.X.X t=0 0 m=audio 32550 RTP/AVP 8 0 101 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=sendrecv a=rtcp:32551 a=ice-ufrag:Dwd23Dem a=ice-pwd:9Itp6Cq7lkYJxMkeDeA1I2kkzw a=candidate:KZyzUR5lXJJpt1Et 1 UDP 2130706431 X.X.X.X 32550 typ host a=candidate:KZyzUR5lXJJpt1Et 2 UDP 2130706430 X.X.X.X 32551 typ host Gerry Kernan Infinity IT | 17 The Mall | Beacon Court | Sandyford | Dublin D18 E3C8 | Ireland Tel: +353 - (0)1 - 293 0090 | E-Mail: <mailto:gerry.kernan@infinityit.ie> gerry.kernan(a)infinityit.ie Managed IT Services Infinity IT - <http://www.infinityit.ie/> www.infinityit.ie IP Telephony Asterisk Consulting - <http://www.asteriskconsulting.com> www.asteriskconsulting.com Contact Centre Total Interact - <http://www.totalinteract.com> www.totalinteract.com

2 3

Info: spamassassin re-enabled on kamailio.org email server
by Daniel-Constantin Mierla 01 Jun '17

01 Jun '17

Hello, fyi: the spamassassin has been re-enabled on kamailio.org email server. It used to run, but for whatever reason got inactive few years ago. It is back as we are facing an increase volume of spam which had to be dealt with in bounces, but also seeing from time to time that spams get through some registered users in the mailing lists. Should anyone encounter unexpected behaviour or you don't see your email in the mailing lists archives, try to contact me -- archives are available at: - https://lists.kamailio.org/pipermail/sr-users/ - https://lists.kamailio.org/pipermail/sr-dev/ Cheers, Daniel -- Daniel-Constantin Mierla www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - www.asipto.com Kamailio World Conference - www.kamailioworld.com

1 0

Re: [SR-Users] Internal system error after fresh install
by shubh diwase 01 Jun '17

01 Jun '17

Using siremis for acc module or another modules, You have to enable them from kamailio.cfg See for the official documentation of kamailio modules,and pages would response too On 01-Jun-2017 1:53 PM, "Clive Churchyard | Tech Cloud" <clive.churchyard(a)techcloud.global> wrote: Hi list Having installed kamailio 4.2 and siremis 4.4 I now get the below error when browsing to either the 'subscribers list' or the 'location list' tried both deb8.8 and ubuntu 14.04 using MySQL and php5 with apache2 Error message: #0, Error in query:: SELECT T0.id, T0.username, T0.domain, T0.contact, T0.received, T0.path, T0.expires, T0.q, T0.callid, T0.cseq, T0.last_modified, T0.flags, T0.cflags, T0.user_agent, T0.socket, T0.methods, T0.ruid, T0.instance, T0.reg_id, T0.server_id, T0.connection_id, T0.keepalive, T0.partition FROM `location` T0 LIMIT 10. SQLSTATE[42S22]: Column not found: 1054 Unknown column 'T0.server_id' in 'field list' Script name and line number of error: /var/www/siremis-4.4.0/ openbiz/bin/data/BizDataObj_Lite.php:447 Any ideas please Thanks Clive Sent from my iPhone _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

1 0

Internal system error after fresh install
by Clive Churchyard | Tech Cloud 01 Jun '17

01 Jun '17

Hi list Having installed kamailio 4.2 and siremis 4.4 I now get the below error when browsing to either the 'subscribers list' or the 'location list' tried both deb8.8 and ubuntu 14.04 using MySQL and php5 with apache2 Error message: #0, Error in query:: SELECT T0.id, T0.username, T0.domain, T0.contact, T0.received, T0.path, T0.expires, T0.q, T0.callid, T0.cseq, T0.last_modified, T0.flags, T0.cflags, T0.user_agent, T0.socket, T0.methods, T0.ruid, T0.instance, T0.reg_id, T0.server_id, T0.connection_id, T0.keepalive, T0.partition FROM `location` T0 LIMIT 10. SQLSTATE[42S22]: Column not found: 1054 Unknown column 'T0.server_id' in 'field list' Script name and line number of error: /var/www/siremis-4.4.0/openbiz/bin/data/BizDataObj_Lite.php:447 Any ideas please Thanks Clive Sent from my iPhone

2 1

help siremis
by borhen ben jedidia 01 Jun '17

01 Jun '17

Hello, i installer siremis on centos . i need help or manual tu configure it . there is no help on the net . thank you . Borhen Ben Jedidia borhen(a)praxys-crm.com Technico-commercial Skype: borhen3856 Mobile 1 : 00 216 26 76 78 77 Mobile 2 : 06 12 95 62 91 Ligne directe : 01 78 76 90 80 www.praxys-crm.com

3 2

db2_ldap not loading due to not being found by find_by_name
by Michael Vale 01 Jun '17

01 Jun '17

hi. in kamailio-5.0.1 db2_ldap is not being found. it is looking for db_ldap instead by mistake.

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users