- sr-users - kamailio.org

"kamctl restart" fails
by Yu Boot 09 Aug '17

09 Aug '17

# kamctl restart INFO: Stopping Kamailio : INFO: stopped INFO: Starting Kamailio : 2292 pts/0 S+ 0:00 /bin/egrep kamailio -rw-r--r--. 1 kamailio kamailio 5 Aug 8 11:15 /var/run/kamailio.pid INFO: PID file exists (/var/run/kamailio.pid)! Kamailio already running? "service kamailio restart" works fine. What's wrong? Centos 6.9 x64, Kamailio 4.3 installed from official repo.

3 3

how to remove a line in sdp
by Sunil More 09 Aug '17

09 Aug '17

Hello All, I have the following SDP coming in from a carrier and would like to remove the following line. Cant figure how to go about it. line to remove : *a=cdsc: 1 image udptl t38* sdp is as below Content-Type: application/sdp. Content-Length: 293. . v=0. o=hiQ9200 5859020170708143552 1175715965 IN IP4 X.Y.Z.A. s=Phone Call via hiQ9200 SIPCA. c=IN IP4 X.Y.Z.A. t=0 0. m=audio 16648 RTP/AVP 8 101. a=rtpmap:8 PCMA/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-15. a=sqn: 0. *a=cdsc: 1 image udptl t38.* a=sendrecv. a=ptime:20. This reply comes from a upstream carrier in session progress and 200ok causing one-way audio for me. Thanking You, Sunil More Ph : 9503338275

2 1

Billing plan
by Logeshwaran G 09 Aug '17

09 Aug '17

Hi, Is there any billing application or modules to use with kamailio , for example if i want to check the credits of the user on every passing minute , and when he's out of credits i stop the call. Thanks & Kind Regards, Logeshwaran G

2 1

sqlops error
by Logeshwaran G 09 Aug '17

09 Aug '17

modparam("sqlops","sqlcon",DBURL) Whether the above modparam implementation is wrong ? I am not sure Its saying some error as 0(2519) ERROR: sqlops [sql_api.c:669]: sql_parse_param(): invalid sqlops parameter

3 5

Core crash in del_lump() "offset exceeds message size" when using subst() inside tm:local-request route.
by Cody Herzog 08 Aug '17

08 Aug '17

Hello. Inside the tm:local-request route, I am trying to modify the body of outgoing NOTIFY messages using the subst_body() function. Things seem to work fine most of the time. The NOTIFY messages are correctly modified. However, I will very rarely hit a crash. I can force the crash to happen more quickly by stress testing with thousands of NOTIFY messages being modified. Is it safe to call subst() or subst_body() inside the tm:local-request route? If not, is there another way I can modify the outgoing NOTIFY messages safely? Note that I am also calling append_hf() inside the same tm:local-request route, but that has been working for a very long time without causing any problems. Could there be some kind of bad interaction between append_hf() and subst_body()? Strangely, it seems like using subst() makes the crash more likely to happen. For some reason, subst_body() seems to be more robust. Here are the logs I see: --------- Jul 28 10:57:40 SIPCOMM-VEGAS-TEST /usr/local/sbin/kamailio[2476]: CRITICAL: <core> [data_lump.c:292]: del_lump(): offset exceeds message size (1625 > 1194) aborting... Jul 28 10:57:43 SIPCOMM-VEGAS-TEST /usr/local/sbin/kamailio[2481]: CRITICAL: <core> [pass_fd.c:275]: receive_fd(): EOF on 53 Jul 28 10:57:44 SIPCOMM-VEGAS-TEST /usr/local/sbin/kamailio[2367]: ALERT: <core> [main.c:731]: handle_sigs(): child process 2476 exited by a signal 6 Jul 28 10:57:44 SIPCOMM-VEGAS-TEST /usr/local/sbin/kamailio[2367]: ALERT: <core> [main.c:734]: handle_sigs(): core was generated Jul 28 10:57:44 SIPCOMM-VEGAS-TEST /usr/local/sbin/kamailio[2367]: INFO: <core> [main.c:756]: handle_sigs(): terminating due to SIGCHLD --------- Here is a GDB back trace from the core dump: --------- #0 0x00007fd91a567c37 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 #1 0x00007fd91a56b028 in __GI_abort () at abort.c:89 #2 0x000000000044e981 in del_lump (msg=0x7fd917c5ed60 <lreq>, offset=1625, len=20, type=HDR_OTHER_T) at data_lump.c:293 #3 0x00007fd91676297f in subst_f (msg=0x7fd917c5ed60 <lreq>, subst=0x7fd919e5ccc0 "\320\356\345\031\331\177", ignored=0x0) at textops.c:681 #4 0x000000000041e1dd in do_action (h=0x7ffd364b87c0, a=0x7fd919e9b438, msg=0x7fd917c5ed60 <lreq>) at action.c:1059 #5 0x000000000042a917 in run_actions (h=0x7ffd364b87c0, a=0x7fd919e9b438, msg=0x7fd917c5ed60 <lreq>) at action.c:1548 #6 0x000000000042af94 in run_actions_safe (h=0x7ffd364ba5b0, a=0x7fd919e9b438, msg=0x7fd917c5ed60 <lreq>) at action.c:1613 #7 0x0000000000549972 in rval_get_int (h=0x7ffd364ba5b0, msg=0x7fd917c5ed60 <lreq>, i=0x7ffd364b8b58, rv=0x7fd919e9ced8, cache=0x0) at rvalue.c:912 #8 0x000000000054dc7c in rval_expr_eval_int (h=0x7ffd364ba5b0, msg=0x7fd917c5ed60 <lreq>, res=0x7ffd364b8b58, rve=0x7fd919e9ced0) at rvalue.c:1910 #9 0x000000000041dc52 in do_action (h=0x7ffd364ba5b0, a=0x7fd919e9d990, msg=0x7fd917c5ed60 <lreq>) at action.c:1029 #10 0x000000000042a917 in run_actions (h=0x7ffd364ba5b0, a=0x7fd919e9d990, msg=0x7fd917c5ed60 <lreq>) at action.c:1548 #11 0x000000000041e0c4 in do_action (h=0x7ffd364ba5b0, a=0x7fd919e9dad8, msg=0x7fd917c5ed60 <lreq>) at action.c:1044 #12 0x000000000042a917 in run_actions (h=0x7ffd364ba5b0, a=0x7fd919e973b8, msg=0x7fd917c5ed60 <lreq>) at action.c:1548 #13 0x000000000041ab46 in do_action (h=0x7ffd364ba5b0, a=0x7fd919e95d70, msg=0x7fd917c5ed60 <lreq>) at action.c:677 #14 0x000000000042a917 in run_actions (h=0x7ffd364ba5b0, a=0x7fd919e8f330, msg=0x7fd917c5ed60 <lreq>) at action.c:1548 #15 0x000000000041e0c4 in do_action (h=0x7ffd364ba5b0, a=0x7fd919e95eb8, msg=0x7fd917c5ed60 <lreq>) at action.c:1044 #16 0x000000000042a917 in run_actions (h=0x7ffd364ba5b0, a=0x7fd919e8c8e0, msg=0x7fd917c5ed60 <lreq>) at action.c:1548 #17 0x000000000042b07d in run_top_route (a=0x7fd919e8c8e0, msg=0x7fd917c5ed60 <lreq>, c=0x0) at action.c:1634 #18 0x00007fd917a0539a in t_uac_prepare (uac_r=0x7ffd364baf20, dst_req=0x7ffd364ba8f0, dst_cell=0x7ffd364ba8f8) at uac.c:391 #19 0x00007fd917a07945 in t_uac_with_ids (uac_r=0x7ffd364baf20, ret_index=0x0, ret_label=0x0) at uac.c:599 #20 0x00007fd917a07918 in t_uac (uac_r=0x7ffd364baf20) at uac.c:584 #21 0x00007fd917a09b9e in req_within (uac_r=0x7ffd364baf20) at uac.c:802 #22 0x00007fd914674052 in send_notify_request (subs=0x7ffd364bb200, watcher_subs=0x0, n_body=0x0, force_null_body=0) at notify.c:1600 #23 0x00007fd9146754b3 in notify (subs=0x7ffd364bb200, watcher_subs=0x0, n_body=0x0, force_null_body=0) at notify.c:1690 #24 0x00007fd9146cec6a in update_subscription (msg=0x7fd919efeb70, subs=0x7ffd364bb200, to_tag_gen=1, sent_reply=0x7ffd364bb16c) at subscribe.c:697 #25 0x00007fd9146d45b7 in handle_subscribe (msg=0x7fd919efeb70, watcher_user=..., watcher_domain=...) at subscribe.c:1057 #26 0x00007fd9146d08b0 in handle_subscribe0 (msg=0x7fd919efeb70) at subscribe.c:816 #27 0x000000000041e155 in do_action (h=0x7ffd364bd680, a=0x7fd919e19508, msg=0x7fd919efeb70) at action.c:1053 #28 0x000000000042a917 in run_actions (h=0x7ffd364bd680, a=0x7fd919e19508, msg=0x7fd919efeb70) at action.c:1548 #29 0x000000000041e112 in do_action (h=0x7ffd364bd680, a=0x7fd919e19650, msg=0x7fd919efeb70) at action.c:1048 #30 0x000000000042a917 in run_actions (h=0x7ffd364bd680, a=0x7fd919e02638, msg=0x7fd919efeb70) at action.c:1548 #31 0x000000000041e0c4 in do_action (h=0x7ffd364bd680, a=0x7fd919e199c0, msg=0x7fd919efeb70) at action.c:1044 #32 0x000000000042a917 in run_actions (h=0x7ffd364bd680, a=0x7fd919e199c0, msg=0x7fd919efeb70) at action.c:1548 #33 0x000000000041e112 in do_action (h=0x7ffd364bd680, a=0x7fd919e19b08, msg=0x7fd919efeb70) at action.c:1048 #34 0x000000000042a917 in run_actions (h=0x7ffd364bd680, a=0x7fd919df99d8, msg=0x7fd919efeb70) at action.c:1548 #35 0x000000000041ab46 in do_action (h=0x7ffd364bd680, a=0x7fd919dbe960, msg=0x7fd919efeb70) at action.c:677 #36 0x000000000042a917 in run_actions (h=0x7ffd364bd680, a=0x7fd919daedf8, msg=0x7fd919efeb70) at action.c:1548 #37 0x000000000042b07d in run_top_route (a=0x7fd919daedf8, msg=0x7fd919efeb70, c=0x0) at action.c:1634 #38 0x000000000050f678 in receive_msg (buf=0x7fd8f2c6ce28 "SUBSCRIBE sip:endpoint-1720@intouchstaging.com SIP/2.0\r\nRecord-Route: <sip:64.64.203.109:443;transport=tls;lr=on>\r\nAccept: application/dialog-info+xml, application/pidf+xml, application/pidf-diff+xml,"..., len=1284, rcv_info=0x7fd8f2c6cb50) at receive.c:196 #39 0x00000000005fb99e in receive_tcp_msg (tcpbuf=0x7fd8f2c6ce28 "SUBSCRIBE sip:endpoint-1720@intouchstaging.com SIP/2.0\r\nRecord-Route: <sip:64.64.203.109:443;transport=tls;lr=on>\r\nAccept: application/dialog-info+xml, application/pidf+xml, application/pidf-diff+xml,"..., len=1284, rcv_info=0x7fd8f2c6cb50, con=0x7fd8f2c6cb38) at tcp_read.c:1207 #40 0x00000000005fd48c in tcp_read_req (con=0x7fd8f2c6cb38, bytes_read=0x7ffd364bdb7c, read_flags=0x7ffd364bdb84) at tcp_read.c:1411 #41 0x0000000000600aee in handle_io (fm=0x7fd919f07d80, events=1, idx=-1) at tcp_read.c:1643 #42 0x00000000005f3ab8 in io_wait_loop_epoll (h=0xa3d3e0 <io_w>, t=2, repeat=0) at io_wait.h:1061 #43 0x0000000000601cf7 in tcp_receive_loop (unix_sock=57) at tcp_read.c:1755 #44 0x00000000005ea235 in tcp_init_children () at tcp_main.c:4788 #45 0x00000000004ab048 in main_loop () at main.c:1675 #46 0x00000000004b10c2 in main (argc=13, argv=0x7ffd364be258) at main.c:2566 --------- Thanks very much. -Cody

2 8

kamailio + dispatcher asterisks + pstn gateways
by Aidar Kamalov 08 Aug '17

08 Aug '17

Hello, Whats the best way to provide subject? Now I have central kamailio server and (asterisk "media" servers + asterisk pstn gateway in different cities). Kamailio default config with some changes in route[LOCATION] if (!lookup("location")) { $var(rc) = $rc; route(TOVOICEMAIL); t_newtran(); switch ($var(rc)) { case -1: xwarn("Contact $rU not registered. Forwarding call to dispatcher"); append_hf("X-External: true\r\n"); $rU = "00"+$rU; break; case -3: send_reply("404", "Not Found"); exit; case -2: send_reply("405", "Method Not Allowed"); exit; } } ...... # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } if(!ds_is_from_list()) { route(DISPATCH); } route(RELAY); So all calls going to asterisk server. Not local calls with 00 prefix. And asterisk context: context kamailio { _X. => { Noop(CALL to kamailio user ${EXTEN}); Dial(SIP/${EXTEN}@${SIPDOMAIN},60,RTt); Hangup; } _00X. => { Noop(CALL to external user ${EXTEN}); Dial(SIP/PSTN-SERVER/${EXTEN:2},60,RTt); Hangup; } } Is it right way? Maybe any better approach? How to keep route logic at kamailio, but use dispatcher asterisk to proccess the calls to pstn(all endpoints at one city to pstn asterisk at this city. In others city there are other pstn gateways)? -- Aydar A. Kamalov

1 0

How to simulate a group call with kamailio ?
by leslie mekiyess 08 Aug '17

08 Aug '17

Hi, I have installed the latest kamailio on linux integrated with MYSQL server, What are the procedures ( configuration / commands etc ...) to simulate a group call ? BR, Leslie.

1 0

carrierroute and failure route
by Yu Boot 08 Aug '17

08 Aug '17

Hello. I'm trying to make carrierroute work on default kamailio.cfg first route: FXS gw ->(NAT)->Kami->FS->PSTN second route FXS gw->(NAT)-> Kami->Mediant2000->E1->PSTN First one works OK, but if second route triggers, the following disaster occurs (tshark dump) https://pastebin.com/00Ayty36 carrierroute is used as following https://pastebin.com/5J1atq00 What's wrong?

5 12

How do I add a record to a group table ?
by leslie mekiyess 08 Aug '17

08 Aug '17

Hi, I am working with the last kamilio integrated with MySQL. Is there any configuration , db cmds instructions in order to simulate a group call ? BR, Leslie.

1 0

Kamailio Server not relaying any message
by Rahman Afzal 08 Aug '17

08 Aug '17

Hi, I have an ongoing issue with kamailio...my softclient registered with kamilio originates a call which gets routed to another switch from kamilio and that switch terminates the call to B party side. Now once calls is established, B party sends BYE messages or (any re-INVITE during the dialog) which comes to the kamailio but kamailio is not relaying it to the A party...Can someone please help in this regard. Regards, Abdul Rahman

1 0

issue in Dialplan
by Logeshwaran G 08 Aug '17

08 Aug '17

Please find the below rules I am using: +----+------+----+----------+--------------+-----------+---- -----------+----------+-------+ | id | dpid | pr | match_op | match_exp | match_len | subst_exp | repl_exp | attrs | +----+------+----+----------+--------------+-----------+---- -----------+----------+-------+ | 1 | 1 | 1 | 1 | ^000[0-9]+$ | 0 | ^000([0-9]+)$ | 1 | | Correct me If I am Wrong,

1 0

Module for Call placement between the two Different Switches
by Logeshwaran G 08 Aug '17

08 Aug '17

Kindly Someone please say the name of the kamailio module which is used for Call Placement(Sip Transmission) Between the Switches. Scenario: ======== I am Having my own kamailio Pbx setup, I Have my local subscriber list database, I need to allow the calls from the outside switch(For example Nexge or Itel etc...) What module I have to refer for this??

2 2

Some Fault messages I am trying to clear up
by Kevin Greene 07 Aug '17

07 Aug '17

Hi list people: When using Siremis with Kamailio, I see this error: First Fault [2017-08-07 22:55:17 (GMT)] An exception occurred while executing this script: Error message: #256, Unable to location template file system_internal_error.tpl. Script name and line number of error: /var/www/siremis-4.3.0/openbiz/bin/Resource.php:283 function: errorHandler ( 256, "Unable to location template file system_internal_error.tpl.", "/var/www/siremis-4.3.0/openbiz/bin/Resource.php", 283, Array(11) ) @ /var/www/siremis-4.3.0/openbiz/bin/sysheader.inc 117 function: userErrorHandler ( 256, "Unable to location template file system_internal_error.tpl.", "/var/www/siremis-4.3.0/openbiz/bin/Resource.php", 283, Array(11) ) @ function: trigger_error ( "Unable to location template file system_internal_error.tpl.", 256 ) @ /var/www/siremis-4.3.0/openbiz/bin/Resource.php 283 function: getTplFileWithPath ( "system_internal_error.tpl", "email" ) @ /var/www/siremis-4.3.0/openbiz/bin/BizSystem.php 544 function: getTplFileWithPath ( "system_internal_error.tpl", "email" ) @ /var/www/siremis-4.3.0/siremis/modules/service/userEmailService.php 108 function: SystemInternalErrorEmail ( Array(2), Null ) @ /var/www/siremis-4.3.0/siremis/modules/common/form/ErrorForm.php 34 function: Report ( ) @ /var/www/siremis-4.3.0/openbiz/bin/BizController.php 310 function: invoke ( ) @ /var/www/siremis-4.3.0/openbiz/bin/BizController.php 110 function: dispatchRequest ( ) @ /var/www/siremis-4.3.0/openbiz/bin/BizController.php 32 function: include_once ( "/var/www/siremis-4.3.0/openbiz/bin/BizController.php" ) @ /var/www/siremis-4.3.0/siremis/bin/controller.php 6 It looks like I am missing a template file to send a copy of the error message to the system administrator. Also: during the installation, I, using the install script, added a number of tables to the MySQL server. However, it seems I am missing a few columns in a couple of the tables. Is there some sort of system sanity script that will check the database for all the required tables and required columns? Example: 2017-08-07 23:12:14 (GMT)] An exception occurred while executing this script: Error message: #0, Error in query:: SELECT T0.id, T0.setid, T0.url, T0.flags, T0.weight, T0.description FROM rtpproxy T0 LIMIT 10. SQLSTATE[42S02]: Base table or view not found: 1146 Table 'kamailio.rtpproxy' doesn't exist Script name and line number of error: /var/www/siremis-4.3.0/openbiz/bin/data/BizDataObj_Lite.php:447 or: [2017-08-07 23:14:58 (GMT)] An exception occurred while executing this script: Error message: #0, Error in query:: SELECT T0.id, T0.name, T0.uri, T0.mohdir, T0.mohfile, T0.debug FROM mohqueues T0 LIMIT 10. SQLSTATE[42S02]: Base table or view not found: 1146 Table 'kamailio.mohqueues' doesn't exist or: [2017-08-07 23:16:57 (GMT)] An exception occurred while executing this script: Error message: #42S22, SQLSTATE[42S22]: Column not found: 1054 Unknown column 'src_user' in 'field list' Script name and line number of error: /var/www/siremis-4.3.0/openbiz/others/Zend/Db/Statement/Pdo.php:234 or: 2017-08-07 23:18:33 (GMT)] An exception occurred while executing this script: Error message: #0, Error in query:: SELECT T0.id, T0.method, T0.from_tag, T0.to_tag, T0.callid, T0.sip_code, T0.sip_reason, T0.time, T0.src_ip, T0.dst_user, T0.dst_domain, T0.dst_ouser, T0.src_user, T0.src_domain, T0.cdr_id FROM acc T0 WHERE method='INVITE' AND T0.src_user='admin' LIMIT 10. SQLSTATE[42S22]: Column not found: 1054 Unknown column 'T0.src_ip' in 'field list' In the case of the above table, it does not say which table. Anyway -- any help would be great. Thanks. Kevin

1 0

load credentials in cnxcc from dburl
by Logeshwaran G 07 Aug '17

07 Aug '17

Is there any possibility of loading credential from the db in the cnxcc module. For Example: modparam("auth_db", "load_credentials", "$avp(status)=status") Like the above one , I need it for CNXCC

3 7

Question regarding t_check_trans()
by Joe Baran 07 Aug '17

07 Aug '17

Probably an elementary question, but we're relatively new at digging into the details. We are trying to understand the following block of config code and have a question or two. Our assumption is the t_precheck_trans() function tells us whether another packet has arrived already as a retransmission. However, we're not clear on what the t_check_trans() is doing assuming the condition is true. Any direction on this? Thanks. route[CHECK_RETRANS] { # handle retransmissions if(t_precheck_trans()) { t_check_trans(); exit; } } Joe Baran

3 2

Endpoints distribution to dispatcher
by Aidar Kamalov 05 Aug '17

05 Aug '17

Hello, I want to distribute endpoints calls in different cities to asterisks in the same cities where the endpoint. Now I use dispatcher for distibute calls beetwen asterisks, but without reference to the city. Can you please suggest better module and way for this? Is it better to distribute based on ip? Or may be based on groups? -- Aydar A. Kamalov

2 2

Fwd: Re: Fwd: kemi lua routing block as route in standart cfg
by Yuriy Gorlichenko 04 Aug '17

04 Aug '17

Cool!!! Thx for this reply and help. Yep i will need. I using WS. On Aug 4, 2017 15:33, "Daniel-Constantin Mierla" <miconda(a)gmail.com> wrote: v5.0 doesn't have many of the event route available for kemi. If you use master branch (upcoming 5.1), modules having event routes export a parameter 'event_callback' which needs to be set to a name of a function inside the embedded language script, see the one for tm at: - https://kamailio.org/docs/modules/devel/modules/tm.html#tm.p .event_callback The dialog module should have same mod param. For websocket, do you need the one for xhttp module? If yes, it's available. The event_route[websocket:closed] is not available, as I can see in the code, but I will add it. Cheers, Daniel On 03.08.17 08:38, Yuriy Gorlichenko wrote: Thank you for your response! Probably it was at 5.0.x kemi guide. But anyway Domt uderstand how to call it. I need tm:local reqest, Websockets event_route and dialog. Thats it) On Aug 3, 2017 08:15, "Daniel-Constantin Mierla" <miconda(a)gmail.com> wrote: > Hello, > > where is that TBD note? It needs to be adjusted, probably it is a leftover > from first days of this feature. > > The failure_route, branch_route and onreply_route can be now natively in > the embedded language, see the Lua script example I provide with the link > in my previous email. > > If you are using event_route blocks, let me know which and I can say if > they are available -- many of them are, but some are missing, as I am not > using all the modules available and didn't have the time to dig in all of > them. > > Cheers, > Daniel > > On 02.08.17 13:42, Yuriy Gorlichenko wrote: > > > thx. I just thought that it's possibe to concatenate both engines together. > > So this is my last question regardng kemi: > > Main goal why i still not use kemi at the my projects is a: > > TBD: the options for specific event_route blocks. Meanwhile, should work > using hybrid configuration with request_route/reply_route/… in embedded > interpreter and the other routing blocks in native kamailio.cfg. > > As i uderstand it is not possible to use event_route in a kemi. only > native. If yes - do you expect t ointegrate this part of routes at the kemi > interface in future? > > > > 2017-08-02 14:36 GMT+03:00 Daniel-Constantin Mierla <miconda(a)gmail.com>: > >> Hello, >> >> if you want to do routing in lua via kemi, the kamailio.cfg has only the >> passive part (global parameters, loading modules and modparams) and the >> active part (routing blocks) is a separate file written in the desired >> scripting language (e.g., lua). See examples: >> >> - https://github.com/kamailio/kamailio/blob/master/misc/exampl >> es/kemi/kamailio-basic-kemi.cfg >> >> - https://github.com/kamailio/kamailio/blob/master/misc/exampl >> es/kemi/kamailio-basic-kemi-lua.lua >> >> If you still want to have the native kamailio.cfg with its routing >> blocks, but executed some Lua scripts inline, see app_lua exported >> functions: >> >> - http://www.kamailio.org/docs/modules/5.1.x/modules/app_lua.h >> tml#app_lua.f.lua_run >> >> Cheers, >> Daniel >> >> On 02.08.17 13:28, Yuriy Gorlichenko wrote: >> >> Hi, no >> I wanna include lua routes part at existing kamailio.cfg file >> >> Just wanna rewrite some route with lua code using kemi because lua more >> flexible for my needs, but want to call this route at the cfg file. >> >> like >> kamailio.cfg >> ... >> route { >> [MY_SUPER_ROUTE_IN_LUA] >> } >> ... >> >> Where MY_SUPER_ROUTE_IN_LUA is a route written with kemi on lua language. >> >> >> 2017-08-02 14:10 GMT+03:00 Daniel-Constantin Mierla <miconda(a)gmail.com>: >> >>> Hello, >>> >>> >>> On 02.08.17 12:02, Yuriy Gorlichenko wrote: >>> > Hello. I found how to implement lua routimg logic with >>> > cfgengine but didn't found how to include cimple route in lua at the >>> > cfg file >>> > >>> > Presume i have routing logic and want to include >>> > my_super_custom_route written with Kemo on lua. How i need to set up >>> > my config for it work with both engines? >>> > >>> I am not sure I understand what you try to do. The path to yiour Lua >>> script with routing logic has to be set via modparam of app_lua module. >>> >>> Are you trying to include a lua file in another lua file? >>> >>> Cheers, >>> Daniel >>> >>> -- >>> Daniel-Constantin Mierla >>> www.twitter.com/miconda -- www.linkedin.com/in/miconda >>> Kamailio Advanced Training - www.asipto.com >>> Kamailio World Conference - www.kamailioworld.com >>> >>> >> >> >> _______________________________________________ >> Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> >> >> -- >> Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda >> Kamailio Advanced Training - www.asipto.com >> Kamailio World Conference - www.kamailioworld.com >> >> > > > > _______________________________________________ > Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda > Kamailio Advanced Training - www.asipto.com > Kamailio World Conference - www.kamailioworld.com > > -- Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - www.asipto.com Kamailio World Conference - www.kamailioworld.com

1 0

Pull Request or Issue? - coredump in case no contentLengthHdr present in REGISTER
by Valentin Christoph 04 Aug '17

04 Aug '17

Hi all, We have identified an IMS related issue, when the "Content-Length" header is missing in REGISTER request. It's a missing null pointer check in file modules/ims_auth/utils.c We are using Kamailio 4.4.5 for this purpose and we would need a fix in that release. I'm not sure, how to proceed now? Should I just create an "Issue" at GitHub, or is it possible for me to create a "Pull Request" at GitHub (would be less effort for you, I guess). Anyway, the change we did in our local GIT repository, is shown in following picture: [cid:image001.jpg@01D30C76.DE88AE10] Thanks, Christoph The information contained in this e-mail message is privileged and confidential and is for the exclusive use of the addressee. The person who receives this message and who is not the addressee, one of his employees or an agent entitled to hand it over to the addressee, is informed that he may not use, disclose or reproduce the contents thereof, and is kindly asked to notify the sender and delete the e-mail immediately.

2 1

Fwd: kemi lua routing block as route in standart cfg
by Yuriy Gorlichenko 04 Aug '17

04 Aug '17

thx. I just thought that it's possibe to concatenate both engines together. So this is my last question regardng kemi: Main goal why i still not use kemi at the my projects is a: TBD: the options for specific event_route blocks. Meanwhile, should work using hybrid configuration with request_route/reply_route/… in embedded interpreter and the other routing blocks in native kamailio.cfg. As i uderstand it is not possible to use event_route in a kemi. only native. If yes - do you expect t ointegrate this part of routes at the kemi interface in future? 2017-08-02 14:36 GMT+03:00 Daniel-Constantin Mierla <miconda(a)gmail.com>: > Hello, > > if you want to do routing in lua via kemi, the kamailio.cfg has only the > passive part (global parameters, loading modules and modparams) and the > active part (routing blocks) is a separate file written in the desired > scripting language (e.g., lua). See examples: > > - https://github.com/kamailio/kamailio/blob/master/misc/exampl > es/kemi/kamailio-basic-kemi.cfg > > - https://github.com/kamailio/kamailio/blob/master/misc/exampl > es/kemi/kamailio-basic-kemi-lua.lua > > If you still want to have the native kamailio.cfg with its routing blocks, > but executed some Lua scripts inline, see app_lua exported functions: > > - http://www.kamailio.org/docs/modules/5.1.x/modules/app_lua.h > tml#app_lua.f.lua_run > > Cheers, > Daniel > > On 02.08.17 13:28, Yuriy Gorlichenko wrote: > > Hi, no > I wanna include lua routes part at existing kamailio.cfg file > > Just wanna rewrite some route with lua code using kemi because lua more > flexible for my needs, but want to call this route at the cfg file. > > like > kamailio.cfg > ... > route { > [MY_SUPER_ROUTE_IN_LUA] > } > ... > > Where MY_SUPER_ROUTE_IN_LUA is a route written with kemi on lua language. > > > 2017-08-02 14:10 GMT+03:00 Daniel-Constantin Mierla <miconda(a)gmail.com>: > >> Hello, >> >> >> On 02.08.17 12:02, Yuriy Gorlichenko wrote: >> > Hello. I found how to implement lua routimg logic with >> > cfgengine but didn't found how to include cimple route in lua at the >> > cfg file >> > >> > Presume i have routing logic and want to include >> > my_super_custom_route written with Kemo on lua. How i need to set up >> > my config for it work with both engines? >> > >> I am not sure I understand what you try to do. The path to yiour Lua >> script with routing logic has to be set via modparam of app_lua module. >> >> Are you trying to include a lua file in another lua file? >> >> Cheers, >> Daniel >> >> -- >> Daniel-Constantin Mierla >> www.twitter.com/miconda -- www.linkedin.com/in/miconda >> Kamailio Advanced Training - www.asipto.com >> Kamailio World Conference - www.kamailioworld.com >> >> > > > _______________________________________________ > Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda > Kamailio Advanced Training - www.asipto.com > Kamailio World Conference - www.kamailioworld.com > >

2 3

Sip-clients not connecting to kamailio, What am I missing?
by Viktor Silfver 04 Aug '17

04 Aug '17

Hi, I’m very new to Kamailio, in fact I have never got Kamailio to work properly. I’m following this tutorial http://kamailio.org/docs/tutorials/5.1.x/kamailio-install-guide-deb/ <http://kamailio.org/docs/tutorials/5.1.x/kamailio-install-guide-deb/> step by step, but my subscribers are not able to connect to Kamailio. (X-lite and Zoiper) I can install Kamialio, create the database, start Kamailio, add subscribers, without any failures or error messages. I’m running debian jessie. When i’m running wireshark I get the message Port unreachable. What am I missing? Can someone give me a hint on what I should look for?

2 1

route[LOCATION] is it bug?
by Aidar Kamalov 04 Aug '17

04 Aug '17

Hello, I 'm new in kamailio. I have kamailio with dispatcher and two asterisks. Endpoints register to kamailio. Calls beetwen endpoints going through dispatcher to asterisks. Calls to other destination rejected by kamailio with 404. But If i put xlog("AAAA") or xwarn in route[LOCATION] in if (!lookup("location")) block (default kamailio 5.0.2 config) calls to other destination goes through dispatcher to asterisks. I cant't understand WHY? :( (sorry for my bad English) route[LOCATION] { #!ifdef WITH_SPEEDDIAL # search for short dialing - 2-digit extension if($rU=~"^[0-9][0-9]$") { if(sd_lookup("speed_dial")) { route(SIPOUT); } } #!endif #!ifdef WITH_ALIASDB # search in DB-based aliases if(alias_db_lookup("dbaliases")) { route(SIPOUT); } #!endif $avp(oexten) = $rU; if (!lookup("location")) { xwarn("method ($rm) r-uri ($ru)\n"); ################## HERE ########################## $var(rc) = $rc; route(TOVOICEMAIL); t_newtran(); switch ($var(rc)) { case -1: case -3: send_reply("404", "Not Found"); exit; case -2: send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } if(!ds_is_from_list()) { route(DISPATCH); } route(RELAY); exit; } -- Aydar A. Kamalov

2 2

Kamailio inserting Quote " mark in SIP header
by Arslan Saeed 03 Aug '17

03 Aug '17

Hi All, We are seeing that Kamailio's nat_helper_module function of add_rcv_param(), inserts " (quote) mark to some of the SIP headers (as below in the contact header in sip 200 OK response) Contact: <sip:172.70.1.2:5060;bnc;received="sip:118.107.184.242:25090 ">;expires=172 We got few SIP UAs that are complaining about the quote mark inclusion in contact header and responding back with SIP 400 bad syntax status code. Requesting views / suggestions from community about this behavior of kamailio and any workarounds available. Cheers Arslan

2 1

Using a number as htable key name
by Jan Hazenberg 03 Aug '17

03 Aug '17

Hello, I'm trying to use a htable to reroute some numbers but when i'm trying to use kamcmd to add a entry where the element name is a number instead of a string i get a 500 error kamcmd htable.seti force_number 1234 1 error: 500 - Not enough parameters (htable name, key name and value) Also with quotes i get the 500 error: kamcmd htable.seti force_number "1234" 1 error: 500 - Not enough parameters (htable name, key name and value) But this works: kamcmd htable.seti force_number a1234 1 Is there a way to escape this so i can use a number as element name? Regards, Jan Hazenberg

1 0

Kamailio example configuration: auth section incomplete?
by George Diamantopoulos 02 Aug '17

02 Aug '17

Hello again, Still getting familiar with kamailio, and I'm wondering about the AUTH route in the example configuration file. Here's a reducted-simplified version of it for reference (from git master, without IP AUTH and comments): ______________________________________________ route[AUTH] { if (is_method("REGISTER") || from_uri==myself) { if (!auth_check("$fd", "subscriber", "1")) { auth_challenge("$fd", "0"); exit; } if(!is_method("REGISTER|PUBLISH")) consume_credentials(); } if (from_uri!=myself && uri!=myself) { sl_send_reply("403","Not relaying"); exit; } return; } ______________________________________________ So the way I see it, what happens is the following: * All REGISTERs will be challenged * All SIP messages with kamailio's aliases in the "From" header URI will be challenged * All SIP messages with no reference to kamailio's aliases in both R-URI and "From" header URI will be dropped The question is, what about messages that do not enter either of the two conditionals? For example, I expect the following to be very common: * Method: INVITE * R-URI: myself * From: username@"UAC's local IP address" (not myself) * To: myself So in the example above, the auth route will return without either having challenged or dropped the request, am I correct? This is because: * For the challenge: Method is not REGISTER and "From URI" is not one of kamailio host's aliases (cumulatively) * For dropping after sending 403: "From URI" is not one of kamailio's host's aliases (which calculates to true) but R-URI is "myself" So I'm guessing we're expecting the challenge to come from elsewhere in cases like the example above? Or is there something else I'm missing here? Thanks! BR, George

2 5

Issue with ims_isc module? (distinct PSI)
by Valentin Christoph 02 Aug '17

02 Aug '17

Hi, Can anyone comment on issue #1168? https://github.com/kamailio/kamailio/issues/1168 Thanks, Christoph The information contained in this e-mail message is privileged and confidential and is for the exclusive use of the addressee. The person who receives this message and who is not the addressee, one of his employees or an agent entitled to hand it over to the addressee, is informed that he may not use, disclose or reproduce the contents thereof, and is kindly asked to notify the sender and delete the e-mail immediately.

3 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users