- sr-users - kamailio.org

[Serusers] how to test that request comes from a fifo?
by Juha Heinanen 11 Jan '05

11 Jan '05

i can easily test in ser.cfg that a request comes from a particular ip address, but how do i test that a request comes from a particular fifo or unix socket? -- juha

2 1

[Serusers] nat_flag parameter in registrar module
by Gurol Akman 11 Jan '05

11 Jan '05

What is the intended use of 'nat_flag' parameter in 'registrar' module? Its default value is set to 4 whereas in modules such as 'mediaproxy' its value gets set to 2. I wasn't able to find any documentation that describes this parameter and/or its permissible values. Thanks in advance -- GA

1 0

RE: [Serusers] Dynamic Routes with SER.
by Ricardo Martinez 11 Jan '05

11 Jan '05

Anyone here? Thanks.! -----Mensaje original----- De: Ricardo Martinez [mailto:rmartinez@redvoiss.net] Enviado el: Lunes, 10 de Enero de 2005 18:14 Para: serusers(a)lists.iptel.org Asunto: RE: [Serusers] Dynamic Routes with SER. Thanks Samuel, I think the dispatcher module does not acomplish my requeriments for now. I more interested now in the avpops module. I read some lines about the module a few months ago for a similar problem. Is someone using this module for something like this?. In particular i want to mantain a route table for all my destinations and the respective terminating gateway. For example : Code Gateway 56 | 192.168.0.1 1 | 192.168.0.2 44 | 192.168.0.3 and so on.... This table is consulted for all the incoming request and then SER answer with a Redirect for the particular GW. Can someone provide me and example on how the AVPOPS module can handle this? I will really appreciate.... Thanks in advance Best Regards. Ricardo.- -----Mensaje original----- De: Samuel Osorio Calvo [mailto:samuel.osorio@nl.thalesgroup.com] Enviado el: Lunes, 10 de Enero de 2005 12:30 Para: dnay(a)ionosphere.net; serusers(a)lists.iptel.org; rmartinez(a)redvoiss.net Asunto: RE: [Serusers] Dynamic Routes with SER. Hi, There are a couple of modules in version 0.9 which can be used for dynamic routing depending on the desired functinality. One is called dispatcher, and is meant to be a load balancer without fair distribution. I think that you define a list of possible servers in a database and the dispatcher module forwards message to one of them (together with all within-dialog future responses and requests). The other option is to use avpops module which provides an attribute-value functionallity. You can use them to select the next hop depending on the incoming SIP message parameters and the values present in a database. I would advise you to take a look at the documentation of both modules to see if they suit your requirements before using the exec commands, which are not 100% reliable and increases the memory requirements as you have mentioned. From the exec module's readme: 1.5. Known Issues There is currently no guarantee that scripts ever return and stop blocking SIP server. (There is kill.c but it is not used along with the current mechanisms based on popen. Besides that kill.c is ugly). Enjoy SER, Samuel. Unclassified. >>> Ricardo Martinez <rmartinez(a)redvoiss.net> 01/10/05 05:22PM >>> Darren: Thanks for your quick answer. I was thinking in a similar solution, using a external program, in fact i use the exec_dset() functionality for something similar. I was thinking add to this solution a Redirect Server?. Maybe the call to the dynamic route proccess is in the Redirect Server, calling the exec_dset() function, so all the extra resource needed to perform these tasks are used in the redirect server and no in my Proxy-Registrar Server. Is just an idea.. IS this scalable maybe? Is this posible? Thanks in advance Best Regards, Ricardo Martinez.- -----Mensaje original----- De: Darren Nay [mailto:dnay@ionosphere.net] Enviado el: Lunes, 10 de Enero de 2005 11:06 Para: Ricardo Martinez; 'serusers(a)lists.iptel.org' Asunto: Re: [Serusers] Dynamic Routes with SER. Take a look in the SER Admin guide at "Executing an External Program". You can write an application with perl, C, etc.. Which will process the call info and return a destination set. This functionality is available using the exec_dset function in SERs exec module. I use this feature in our SER deployment and it works great. The only problem I've found so far is that it definitely does increases the resources required per call, and hurts your scalability. Especially if you use perl. Try to use C if at all possible, or persistent perl at the very least. Darren Nay On 1/10/05 11:01 AM, "Ricardo Martinez" <rmartinez(a)redvoiss.net> wrote: > Hello List. > I have a question on how to handle dynamic routes in SER. For what > i know, SER by himself is not the best way to handle dynamic routes, since > every change in a route implies a change in the ser.cfg file and then a > restart of the service. So i'm thinking how to solve this problem and a was > hoping that someone could give some advice on this issue. > Any idea is welcome. > > Thanks in advance. > BEst Regards. > > Ricardo Martinez.- > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] Using Prefix to change a Number
by Simon Miles 11 Jan '05

11 Jan '05

I want to be able to prefix a dialled number before lookup. I use the command prefix("123") and I can then use lookup("location") and it is found in my database. But if I then use lookup again it fails. Does anyone know the reason why ? Thanks Simon

2 1

[Serusers] Authentication
by Humberto Aicardi 11 Jan '05

11 Jan '05

Hi everyone, I have one question which I have searched but didn't find an answer. If I have a FXO (SIP) gateway which requires authentication, how can SER authenticate with it? Is it possible? Can an example be posted? Thanks, Humberto

2 1

[Serusers] New module doubt
by Vitor Brasileiro 11 Jan '05

11 Jan '05

Hi list, I've created a new module for SER but I'm not able to set modparam values. SER says no module matchs. Should I do any special configuration before? Thanks, Vitor Brasileiro.

2 1

[Serusers] Which Number does a PSTN Gateway call ?
by Simon Miles 11 Jan '05

11 Jan '05

Here's a very simple question about a PSTN Gateway :- When a PSTN gateway receives an INVITE, does it dial the number in the Request-URI or the To header field ? Does it depend whether the gateway support RFC2543 or RFC3261 ? Many Thanks Simon

1 0

[Serusers] Cannot connect to radiator
by dangtien 10 Jan '05

10 Jan '05

HI all, I have implement SER + RadiusClient (raidus_SER how to) With command radclient -f digest 203.160.97.234:1645 auth mysecret =>OK But I can't use SIP client connect to radius server. I don't see anything radius message Help me config SER+Radiusclient and Radiator Thank a lot

2 1

[Serusers] Support for Gateway still on RFC2543
by Simon Miles 10 Jan '05

10 Jan '05

Dear Community, I still have gateways that confirm to RFC2543 and not the newer RFC3261. This means the use of URI and To fields are different. Is there any way of telling sip_router that it needs to conform to the old spec ? Thanks Simon

2 1

[Serusers] Sipura NOTIFY
by Matt Schulte 10 Jan '05

10 Jan '05

It seems Sipura's use NOTIFY for their keepalives, since the user in question is registered, I was wondering what others have done out there to ack these messages? It's of course easiest to ignore these but I wanted an alternative. :-) Matt

2 1

RE: [Serusers] Dynamic Routes with SER.
by Ricardo Martinez 10 Jan '05

10 Jan '05

Thanks Samuel, I think the dispatcher module does not acomplish my requeriments for now. I more interested now in the avpops module. I read some lines about the module a few months ago for a similar problem. Is someone using this module for something like this?. In particular i want to mantain a route table for all my destinations and the respective terminating gateway. For example : Code Gateway 56 | 192.168.0.1 1 | 192.168.0.2 44 | 192.168.0.3 and so on.... This table is consulted for all the incoming request and then SER answer with a Redirect for the particular GW. Can someone provide me and example on how the AVPOPS module can handle this? I will really appreciate.... Thanks in advance Best Regards. Ricardo.- -----Mensaje original----- De: Samuel Osorio Calvo [mailto:samuel.osorio@nl.thalesgroup.com] Enviado el: Lunes, 10 de Enero de 2005 12:30 Para: dnay(a)ionosphere.net; serusers(a)lists.iptel.org; rmartinez(a)redvoiss.net Asunto: RE: [Serusers] Dynamic Routes with SER. Hi, There are a couple of modules in version 0.9 which can be used for dynamic routing depending on the desired functinality. One is called dispatcher, and is meant to be a load balancer without fair distribution. I think that you define a list of possible servers in a database and the dispatcher module forwards message to one of them (together with all within-dialog future responses and requests). The other option is to use avpops module which provides an attribute-value functionallity. You can use them to select the next hop depending on the incoming SIP message parameters and the values present in a database. I would advise you to take a look at the documentation of both modules to see if they suit your requirements before using the exec commands, which are not 100% reliable and increases the memory requirements as you have mentioned. From the exec module's readme: 1.5. Known Issues There is currently no guarantee that scripts ever return and stop blocking SIP server. (There is kill.c but it is not used along with the current mechanisms based on popen. Besides that kill.c is ugly). Enjoy SER, Samuel. Unclassified. >>> Ricardo Martinez <rmartinez(a)redvoiss.net> 01/10/05 05:22PM >>> Darren: Thanks for your quick answer. I was thinking in a similar solution, using a external program, in fact i use the exec_dset() functionality for something similar. I was thinking add to this solution a Redirect Server?. Maybe the call to the dynamic route proccess is in the Redirect Server, calling the exec_dset() function, so all the extra resource needed to perform these tasks are used in the redirect server and no in my Proxy-Registrar Server. Is just an idea.. IS this scalable maybe? Is this posible? Thanks in advance Best Regards, Ricardo Martinez.- -----Mensaje original----- De: Darren Nay [mailto:dnay@ionosphere.net] Enviado el: Lunes, 10 de Enero de 2005 11:06 Para: Ricardo Martinez; 'serusers(a)lists.iptel.org' Asunto: Re: [Serusers] Dynamic Routes with SER. Take a look in the SER Admin guide at "Executing an External Program". You can write an application with perl, C, etc.. Which will process the call info and return a destination set. This functionality is available using the exec_dset function in SERs exec module. I use this feature in our SER deployment and it works great. The only problem I've found so far is that it definitely does increases the resources required per call, and hurts your scalability. Especially if you use perl. Try to use C if at all possible, or persistent perl at the very least. Darren Nay On 1/10/05 11:01 AM, "Ricardo Martinez" <rmartinez(a)redvoiss.net> wrote: > Hello List. > I have a question on how to handle dynamic routes in SER. For what > i know, SER by himself is not the best way to handle dynamic routes, since > every change in a route implies a change in the ser.cfg file and then a > restart of the service. So i'm thinking how to solve this problem and a was > hoping that someone could give some advice on this issue. > Any idea is welcome. > > Thanks in advance. > BEst Regards. > > Ricardo Martinez.- > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] Problems with MySQL CDR logging
by C. Ed Felt 10 Jan '05

10 Jan '05

I have set up ser according to howtos on iptel.org. I am having trouble finding sample configs for logging CDRs to the MySQL database created for use by SERWEB with the provided shell script. My main issue is what flags to set for accounting and where to call the "setflag" function so that call signals are properly logged as CDRs in to the SERWEB database. I make calls, and nothing is there. I do not see any errors either. I have compiled the acc.so module for MySQL support as well. Any information would be greatly appreciated. Thank you, C. Ed Felt caflobvi.com

1 0

[Serusers] HELP: AVPOPS serial forking
by Java Rockx 10 Jan '05

10 Jan '05

Hi all. I'm trying to "uncomplicate" my ser.cfg and part of this is coming up with a simplistic way to handle failover to voicemail and unconditional call forwarding (forward busy and forward no answer are also needed, but I'll do this later). So serial forking seems perfect for this job but I'm having trouble getting it working. I added the "type" to usr_preferences as described in the avpops README. And my ser.cfg was modified similar to example 8.4 in the avpops online documentation at http://www.voice-system.ro/docs/avpops/ar01s08.html#ex_serial_forking My partial ser.cfg is below. Can anyone tell me why ser will not route calls? I just get dead air when I dial a number. I can see in my MySQL logs that avpops is querying the database - but I don't see how it is putting the read DB values in to the $serial_fork AVP. I also see plenty of errors regarding media_proxy - so I know my code is messed up. Many Thanks! Paul modparam("avpops", "avp_url", "mysql://ser:heslo@localhost/ser") modparam("avpops", "avp_table", "usr_preferences") modparam("avpops", "avp_aliases", "serial_fork=i:665") route { ### all the usual stuff if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); break; }; if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; if (method=="INVITE") { # a hack to get the user's voicemail URI in to avp # since the voicemail server is an external server if (is_user_in("Request-URI", "voicemail")) { rewritehostport("11.22.33.44:5060"); avp_write("$ruri", "$serial_fork"); revert_uri(); }; # load the "callfwd" attribute, if any, for the called party avp_db_load("$to/username", "s:callfwd"); t_on_failure("1"); t_on_reply("1"); }; if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } failure_route[1] { # if caller hung up then don't sent to voicemail or forward if (t_check_status("487")) { break; }; if (avp_pushto("$ruri", "$serial_fork")) { avp_delete("$serial_fork"); t_on_failure("1"); t_relay(); }; } __________________________________ Do you Yahoo!? Meet the all-new My Yahoo! - Try it today! http://my.yahoo.com

1 0

[Serusers] Some ser + sems problems.
by Alex 10 Jan '05

10 Jan '05

Hi all I am running ser with sems. I have some problems to configure the voicemail using sems. I am running 2 processes of sers. 1- ser.cfg 2- ser.cfg1 -> voicemail. when i am checking the logs i receiving : ser[16298]: ERROR: fifo_t_reply: lookup failed ser[16298]: ERROR: fifo_server: command (vm_reply) processing failed Sems[12798]: Error: AmRequestUAS::reply: 481 fifo_t_reply: no such transaction Any help will be appreciated. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Serusers] Accessing SERWEB
by Emmanuel Odoom 10 Jan '05

10 Jan '05

Hello All, I have tried to install apache2, php, serweb, etc. and I will happy to know how to access the index page of serweb. I seem to always get a blank page whenever I access any of the *.php files under /serweb/ Again, anytime i try to access http://host_IP/serweb/admin/ or http://host_IP/serweb/user_interface, I get the error below: Fatal error: Call to undefined function mysql_pconnect() in /usr/local/www/phplib/db_mysql.inc on line 73 Please help with ideas. Your contribution is most welcome. Emmanuel.

4 4

[Serusers] one account
by Alberto Martínez 10 Jan '05

10 Jan '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: MD5 Hello. I would like to know if there is anyway to make ser users to use the same account info to login the provider sip server. I want to share this account with all of the users I have in ser. Is it possible? Thank you. Regards, Tito -----BEGIN PGP SIGNATURE----- Version: 2.6 iQEVAwUAQeLKgHHoJ4bX5QlXAQHeEgf/d4hqXGUswweI9kJ18hNg0FKLHq7RHhIX +Ji+HzHcf8hurv0Zg3qG1QahOjBDrZGXaoi2jACuJRtqKHMDU6n1KMauh9nFnxTE FDEiCCcxukhsh3B7cOhcMSaEhn8fzEtsJx/rSs4h5k8o1edRK1MDi9lh+rP4w1Xq j+FpTBZU/+opt3+Xn4MiS4efmMCJtN+zd1cl9jbyjChLAYQjKG3gwm3WB4TEw1Uo EL9wp+fimy8yRKaILLGPhFkZbC1YbWHuMZpPFxnlor8EmRJrA4zQvve2vmiODR0t ivvRtaoKzkKOm+txSchM+pt+TIsPvey9QVwWz+PR/35voaUeMRNypw== =p+YW -----END PGP SIGNATURE-----

1 0

RE: [Serusers] Dynamic Routes with SER.
by Samuel Osorio Calvo 10 Jan '05

10 Jan '05

Hi, There are a couple of modules in version 0.9 which can be used for dynamic routing depending on the desired functinality. One is called dispatcher, and is meant to be a load balancer without fair distribution. I think that you define a list of possible servers in a database and the dispatcher module forwards message to one of them (together with all within-dialog future responses and requests). The other option is to use avpops module which provides an attribute-value functionallity. You can use them to select the next hop depending on the incoming SIP message parameters and the values present in a database. I would advise you to take a look at the documentation of both modules to see if they suit your requirements before using the exec commands, which are not 100% reliable and increases the memory requirements as you have mentioned. From the exec module's readme: 1.5. Known Issues There is currently no guarantee that scripts ever return and stop blocking SIP server. (There is kill.c but it is not used along with the current mechanisms based on popen. Besides that kill.c is ugly). Enjoy SER, Samuel. Unclassified. >>> Ricardo Martinez <rmartinez(a)redvoiss.net> 01/10/05 05:22PM >>> Darren: Thanks for your quick answer. I was thinking in a similar solution, using a external program, in fact i use the exec_dset() functionality for something similar. I was thinking add to this solution a Redirect Server?. Maybe the call to the dynamic route proccess is in the Redirect Server, calling the exec_dset() function, so all the extra resource needed to perform these tasks are used in the redirect server and no in my Proxy-Registrar Server. Is just an idea.. IS this scalable maybe? Is this posible? Thanks in advance Best Regards, Ricardo Martinez.- -----Mensaje original----- De: Darren Nay [mailto:dnay@ionosphere.net] Enviado el: Lunes, 10 de Enero de 2005 11:06 Para: Ricardo Martinez; 'serusers(a)lists.iptel.org' Asunto: Re: [Serusers] Dynamic Routes with SER. Take a look in the SER Admin guide at "Executing an External Program". You can write an application with perl, C, etc.. Which will process the call info and return a destination set. This functionality is available using the exec_dset function in SERs exec module. I use this feature in our SER deployment and it works great. The only problem I've found so far is that it definitely does increases the resources required per call, and hurts your scalability. Especially if you use perl. Try to use C if at all possible, or persistent perl at the very least. Darren Nay On 1/10/05 11:01 AM, "Ricardo Martinez" <rmartinez(a)redvoiss.net> wrote: > Hello List. > I have a question on how to handle dynamic routes in SER. For what > i know, SER by himself is not the best way to handle dynamic routes, since > every change in a route implies a change in the ser.cfg file and then a > restart of the service. So i'm thinking how to solve this problem and a was > hoping that someone could give some advice on this issue. > Any idea is welcome. > > Thanks in advance. > BEst Regards. > > Ricardo Martinez.- > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

RE: [Serusers] Dynamic Routes with SER.
by Ricardo Martinez 10 Jan '05

10 Jan '05

Darren: Thanks for your quick answer. I was thinking in a similar solution, using a external program, in fact i use the exec_dset() functionality for something similar. I was thinking add to this solution a Redirect Server?. Maybe the call to the dynamic route proccess is in the Redirect Server, calling the exec_dset() function, so all the extra resource needed to perform these tasks are used in the redirect server and no in my Proxy-Registrar Server. Is just an idea.. IS this scalable maybe? Is this posible? Thanks in advance Best Regards, Ricardo Martinez.- -----Mensaje original----- De: Darren Nay [mailto:dnay@ionosphere.net] Enviado el: Lunes, 10 de Enero de 2005 11:06 Para: Ricardo Martinez; 'serusers(a)lists.iptel.org' Asunto: Re: [Serusers] Dynamic Routes with SER. Take a look in the SER Admin guide at "Executing an External Program". You can write an application with perl, C, etc.. Which will process the call info and return a destination set. This functionality is available using the exec_dset function in SERs exec module. I use this feature in our SER deployment and it works great. The only problem I've found so far is that it definitely does increases the resources required per call, and hurts your scalability. Especially if you use perl. Try to use C if at all possible, or persistent perl at the very least. Darren Nay On 1/10/05 11:01 AM, "Ricardo Martinez" <rmartinez(a)redvoiss.net> wrote: > Hello List. > I have a question on how to handle dynamic routes in SER. For what > i know, SER by himself is not the best way to handle dynamic routes, since > every change in a route implies a change in the ser.cfg file and then a > restart of the service. So i'm thinking how to solve this problem and a was > hoping that someone could give some advice on this issue. > Any idea is welcome. > > Thanks in advance. > BEst Regards. > > Ricardo Martinez.- > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] Dynamic Routes with SER.
by Ricardo Martinez 10 Jan '05

10 Jan '05

Hello List. I have a question on how to handle dynamic routes in SER. For what i know, SER by himself is not the best way to handle dynamic routes, since every change in a route implies a change in the ser.cfg file and then a restart of the service. So i'm thinking how to solve this problem and a was hoping that someone could give some advice on this issue. Any idea is welcome. Thanks in advance. BEst Regards. Ricardo Martinez.-

2 1

[Serusers] problem regarding compilation of exluded modules of ser
by pranav_mnit 10 Jan '05

10 Jan '05

Dear sir, As the radius accounting modules are not include in the tar ball. so to include them i tried to install the ser from its source and edit the make file by ommitting radius related modules from the exclude section .but when make install it gives the error "radius.O not compiled" what should i do? pranav MNIT Indiatimes Email now powered by APIC Advantage. Help! HelpClick on the image to chat with meIndiatimes Email now powered by APIC Advantage. Help! HelpClick on the image to chat with me

1 0

[Serusers] how to config SER + RADIATOR + RADIUSCLIENT
by dangtien 10 Jan '05

10 Jan '05

Help me how to config SER + RADIATOR + RADIUSCLIENT help help help !!!

2 1

[Serusers] recommended specification
by Darren Westlake 10 Jan '05

10 Jan '05

Hi all, Could you please help me with specifying a PC for use as an SER server? We currently run a maximum of about 100-150 simultaneous calls but potentially this could go to up 500 within about a year so it would need to handle that many. What processor, RAM, hard disk etc. would be required to run such a service? thanks, Darren

1 0

Re: RES: [Serusers] "Can't connect to RTP proxy"
by Samuel Osorio Calvo 10 Jan '05

10 Jan '05

Please, take a look at older threads regarding the comparison between them. I think there are some good posts about differences. Sorry but I haven't tried them so I can not help you, Samuel Unclassified. >>> "Humberto Aicardi" <humberto(a)aicardi.com.br> 01/09/05 01:49PM >>> Chris, I have just configured RTPProxy and currently is working, but after reading about Media-proxy I too would like to have a comparison between RTPProxy and Media-Proxy. If someone could be kind enough to explain the difference I will appreciate it. Thanks, Humberto -----Mensagem original----- De: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] Em nome de Chris Enviada em: Saturday, January 08, 2005 1:53 PM Para: serusers(a)lists.iptel.org Assunto: [Serusers] "Can't connect to RTP proxy" Hi all, I have 0.9.0 running with customized version of ser.cfg posted by Paul, I think. It works to the extent that the .cfg has so far been developed. However on "serctl start" and with traffic I get multiple logs which all seem to stem from: "send_rtpp_command: can't connect to RTP proxy". Can any one point me in the right direction to "resolve" this? On a connected note (I think), The cfg file is based, it seems, on nat-helper operation. I understand that nat-helper and media-proxy are mutually exclusive. but that media-proxy seems to be more powerful and well suitable for smaller systems that do not need to scale greatly. Is there any document which explains what are the fundamental differences in capabilities between the two, and ser.cfg deltas required to go from nat-helper-->media-proxy. I have found text which references one or the other but not in a comparative sense. thanks Chris --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.809 / Virus Database: 551 - Release Date: 09/12/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.809 / Virus Database: 551 - Release Date: 09/12/2004

1 0

[Serusers] RE: Configuring SER FOR MULTICAST ADDRESS
by Samuel Osorio Calvo 10 Jan '05

10 Jan '05

Hi all, >From version 0.9 and some 0.8-xx-dev versions, multicast listening is working by just adding the address in the config file as if it was another address listen = 224.0.1.75 There are a couple of parameters to configure muilticast (see NEWS file): <- new config variables: < mcast_loopback = <yes/no> - loopback sent multicast datagram, default no. < mcast_ttl = number - set multicast ttl, default OS specific (usually 1). So, if you just want to work in your LAN without loopback, just add the multicast address in the config file and SER is going ot listen to it. Remember to have fork=yes in order to enable SER listening to more than one address, just in case you want SER to listen to the multicast and to the "public IP". Sending to multicast should be as sending to a "normal" UDP address, so from SER's config file I guess you can try to send to a multicast address. Cheers, Sam. Unclassified. >>> <innovation.interops(a)wipro.com> 01/10/05 07:44AM >>> Dear all, Any suggestions on configuring SER for multicast addressing. Thanks karthikeyan.k ________________________________ From: Innovation Interops Sent: Thu 1/6/2005 5:14 PM To: serusers(a)lists.iptel.org Subject: Configuring SER FOR MULTICAST ADDRESS Dear all, How to configure SER to listen on Multicast address? Regds karthikeyan.k Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin(a)wipro.com immediately and destroy all copies of this message and any attachments.

1 0

[Serusers] RE: Configuring SER FOR MULTICAST ADDRESS
by innovation.interops＠wipro.com 10 Jan '05

10 Jan '05

Dear all, Any suggestions on configuring SER for multicast addressing. Thanks karthikeyan.k ________________________________ From: Innovation Interops Sent: Thu 1/6/2005 5:14 PM To: serusers(a)lists.iptel.org Subject: Configuring SER FOR MULTICAST ADDRESS Dear all, How to configure SER to listen on Multicast address? Regds karthikeyan.k Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin(a)wipro.com immediately and destroy all copies of this message and any attachments.

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users