- sr-users - kamailio.org

[Serusers] Problems starting fresh compiled SER
by Karsten Vieth 26 Jan '05

26 Jan '05

I'm new to ser and installing ser. Can someone explain the following errors please. Ser version: 0.8.13-dev-29 http://phonesync.berlios.de/downloads_g.html System: Linux version 2.4.27 OS: Debian 3.or1(woody) (gcc version 2.95.4 20011002 (Debian prerelease)) # sbin/ser -E -c /etc/ser/ser.cfg -ddddd 0(17419) read 496848877 from /dev/random 0(17419) seeding PRNG with 1603288229 0(17419) test random number 1152594766 0(17419) shm_mem_init: success 0(17419) parse error (1,1-2): parse error 0(17419) parse error (9,6-7): unknown config variable 0(17419) parse error (9,7-8): ERROR: bad config file (3 errors) 0(17419) shm_mem_destroy 0(17419) destroying the shared memory lock the configfile is unchanged since creation. http://www.voiping.de/ser.cfg THX

3 4

[Serusers] SER+WM SUBSCRIBE problem
by Yannis Perros 26 Jan '05

26 Jan '05

Hello, I am using ser+nathelper+rtpproxy on a FC3 system (2.6.9-1.667) ser version is 0.8.14. usrloc params is set to 0 (modparam("usrloc", "db_mode", 0)) There are two Windows Messenger clients the one behind NAT, the other not. "REGISTER" works well for both clients, but "SUBSCRIBE" not. Ser replies that no user can be found in the usrloc and the "SUBSCRIBE" message fails with "408 Request Timeout" Users and their contacts have already been added by means of the serctl utility. SIP/2.0 408 Request Timeout..Via: SIP/2.0/UDP 172.16.60.123:7397;rport=1839 ..From: "1000(a)kentauros.rtd.algo.com.gr" <sip:1000@kentauros.rtd.algo.com.g r>;tag=06f4a48b5efb4ef99362475de6f155af;epid=7ef24ed5a6..To: <sip:1001@kent auros.rtd.algo.com.gr>;tag=92fb9945638573c26d114962da30e489-3fbd..Call-ID: 23185c1c2a5a46be8b68785bbc12a22e..CSeq: 1 SUBSCRIBE..Server: Sip EXpress ro uter (0.8.14 (i386/linux))..Content-Length: 0..Warning: 392 193.92.74.49:50 60 "Noisy feedback tells: pid=3985 req_src_ip=172.16.60.123 req_src_port=1 839 in_uri=sip:1001@kentauros.rtd.algo.com.gr out_uri=sip:62.103.218.177:16 213 via_cnt==0".... ......................... 0(3984) SIP Request: 0(3984) method: <SUBSCRIBE> 0(3984) uri: <sip:1001@kentauros.rtd.algo.com.gr> 0(3984) version: <SIP/2.0> 0(3984) parse_headers: flags=1 0(3984) end of header reached, state=5 0(3984) parse_headers: Via found, flags=1 0(3984) parse_headers: this is the first via 0(3984) After parse_msg... 0(3984) preparing to run routing scripts... 0(3984) DEBUG : is_maxfwd_present: searching for max_forwards header 0(3984) parse_headers: flags=128 0(3984) DEBUG: is_maxfwd_present: value = 70 0(3984) check_via_address(172.16.60.123, 172.16.60.123, 0) 0(3984) parse_headers: flags=64 0(3984) end of header reached, state=9 0(3984) DEBUG: get_hdr_field: <To> [38]; uri=[sip:1001@kentauros.rtd.algo.com.g r] 0(3984) DEBUG: to body [<sip:1001@kentauros.rtd.algo.com.gr> ] 0(3984) get_hdr_field: cseq <CSeq>: <1> <SUBSCRIBE> 0(3984) LOG: Someone trying to register from private IP, rewriting 0(3984) parse_headers: flags=64 0(3984) DEBUG: add_param: tag=15f714ddfaa544dc91e3031e37618560 0(3984) DEBUG: add_param: epid=7ef24ed5a6 0(3984) end of header reached, state=29 0(3984) parse_headers: flags=256 0(3984) DEBUG: get_hdr_body : content_length=0 0(3984) found end of header 0(3984) find_first_route(): No Route headers found 0(3984) loose_route(): There is no Route HF 0(3984) check_self - checking if host==us: 25==12 && [kentauros.rtd.algo.com.g r] == [193.92.74.49] 0(3984) check_self - checking if port 5060 matches port 5060 0(3984) check_self - checking if host==us: 25==12 && [kentauros.rtd.algo.com.g r] == [193.92.74.49] 0(3984) check_self - checking if port 5060 matches port 5060 0(3984) lookup(): '1001' Not found in usrloc 0(3984) check_self - checking if host==us: 25==12 && [kentauros.rtd.algo.com.g r] == [193.92.74.49] 0(3984) check_self - checking if port 5060 matches port 5060 0(3984) rwrite(): Rewriting Request-URI with 'sip:62.103.218.177:16213' 0(3984) parse_headers: flags=-1 0(3984) DEBUG: t_addifnew: msg id=25 , global msg id=24 , T on entrance=0xfffff fff 0(3984) parse_headers: flags=-1 0(3984) parse_headers: flags=60 0(3984) t_lookup_request: start searching: hash=31903, isACK=0 0(3984) DEBUG: proceeding to pre-RFC3261 transaction matching 0(3984) DEBUG: non-ACK matched 0(3984) DEBUG: t_lookup_request: transaction found (T=0xf0c120) 0(3984) DBG: t_retransmit_reply: nothing to retransmit 0(3984) DEBUG:destroy_avp_list: destroing list (nil) 0(3984) receive_msg: cleaning up 1(3985) DEBUG: timer routine:7,tl=0xf0c248 next=(nil) 1(3985) DEBUG: retransmission_handler : request resending (t=0xf0c120, SUBSCRIB E ... ) 1(3985) DEBUG: add_to_tail_of_timer[7]: 0xf0c248 1(3985) DEBUG: retransmission_handler : done 1(3985) DEBUG: timer routine:7,tl=0xf0c248 next=(nil) 1(3985) DEBUG: retransmission_handler : request resending (t=0xf0c120, SUBSCRIB E ... ) 1(3985) DEBUG: add_to_tail_of_timer[7]: 0xf0c248 1(3985) DEBUG: retransmission_handler : done Please advice ... Thank you in advance Yannis

1 0

[Serusers] ser + WM SUBSCRIBE problem
by Yannis Perros 26 Jan '05

26 Jan '05

Hello, I am using ser+nathelper+rtpproxy on a FC3 system (2.6.9-1.667) ser version is 0.8.14. usrloc params is set to 0 (modparam("usrloc", "db_mode", 0)) There are two Windows Messenger clients the one behind NAT, the other not. "REGISTER" works well for both clients, but "SUBSCRIBE" not. Ser replies that no user can be found in the usrloc and the "SUBSCRIBE" message fails with "408 Request Timeout" Users and their contacts have already been added by means of the serctl utility. SIP/2.0 408 Request Timeout..Via: SIP/2.0/UDP 172.16.60.123:7397;rport=1839 ..From: "1000(a)kentauros.rtd.algo.com.gr" <sip:1000@kentauros.rtd.algo.com.g r>;tag=06f4a48b5efb4ef99362475de6f155af;epid=7ef24ed5a6..To: <sip:1001@kent auros.rtd.algo.com.gr>;tag=92fb9945638573c26d114962da30e489-3fbd..Call-ID: 23185c1c2a5a46be8b68785bbc12a22e..CSeq: 1 SUBSCRIBE..Server: Sip EXpress ro uter (0.8.14 (i386/linux))..Content-Length: 0..Warning: 392 193.92.74.49:50 60 "Noisy feedback tells: pid=3985 req_src_ip=172.16.60.123 req_src_port=1 839 in_uri=sip:1001@kentauros.rtd.algo.com.gr out_uri=sip:62.103.218.177:16 213 via_cnt==0".... ......................... 0(3984) SIP Request: 0(3984) method: <SUBSCRIBE> 0(3984) uri: <sip:1001@kentauros.rtd.algo.com.gr> 0(3984) version: <SIP/2.0> 0(3984) parse_headers: flags=1 0(3984) end of header reached, state=5 0(3984) parse_headers: Via found, flags=1 0(3984) parse_headers: this is the first via 0(3984) After parse_msg... 0(3984) preparing to run routing scripts... 0(3984) DEBUG : is_maxfwd_present: searching for max_forwards header 0(3984) parse_headers: flags=128 0(3984) DEBUG: is_maxfwd_present: value = 70 0(3984) check_via_address(172.16.60.123, 172.16.60.123, 0) 0(3984) parse_headers: flags=64 0(3984) end of header reached, state=9 0(3984) DEBUG: get_hdr_field: <To> [38]; uri=[sip:1001@kentauros.rtd.algo.com.g r] 0(3984) DEBUG: to body [<sip:1001@kentauros.rtd.algo.com.gr> ] 0(3984) get_hdr_field: cseq <CSeq>: <1> <SUBSCRIBE> 0(3984) LOG: Someone trying to register from private IP, rewriting 0(3984) parse_headers: flags=64 0(3984) DEBUG: add_param: tag=15f714ddfaa544dc91e3031e37618560 0(3984) DEBUG: add_param: epid=7ef24ed5a6 0(3984) end of header reached, state=29 0(3984) parse_headers: flags=256 0(3984) DEBUG: get_hdr_body : content_length=0 0(3984) found end of header 0(3984) find_first_route(): No Route headers found 0(3984) loose_route(): There is no Route HF 0(3984) check_self - checking if host==us: 25==12 && [kentauros.rtd.algo.com.g r] == [193.92.74.49] 0(3984) check_self - checking if port 5060 matches port 5060 0(3984) check_self - checking if host==us: 25==12 && [kentauros.rtd.algo.com.g r] == [193.92.74.49] 0(3984) check_self - checking if port 5060 matches port 5060 0(3984) lookup(): '1001' Not found in usrloc 0(3984) check_self - checking if host==us: 25==12 && [kentauros.rtd.algo.com.g r] == [193.92.74.49] 0(3984) check_self - checking if port 5060 matches port 5060 0(3984) rwrite(): Rewriting Request-URI with 'sip:62.103.218.177:16213' 0(3984) parse_headers: flags=-1 0(3984) DEBUG: t_addifnew: msg id=25 , global msg id=24 , T on entrance=0xfffff fff 0(3984) parse_headers: flags=-1 0(3984) parse_headers: flags=60 0(3984) t_lookup_request: start searching: hash=31903, isACK=0 0(3984) DEBUG: proceeding to pre-RFC3261 transaction matching 0(3984) DEBUG: non-ACK matched 0(3984) DEBUG: t_lookup_request: transaction found (T=0xf0c120) 0(3984) DBG: t_retransmit_reply: nothing to retransmit 0(3984) DEBUG:destroy_avp_list: destroing list (nil) 0(3984) receive_msg: cleaning up 1(3985) DEBUG: timer routine:7,tl=0xf0c248 next=(nil) 1(3985) DEBUG: retransmission_handler : request resending (t=0xf0c120, SUBSCRIB E ... ) 1(3985) DEBUG: add_to_tail_of_timer[7]: 0xf0c248 1(3985) DEBUG: retransmission_handler : done 1(3985) DEBUG: timer routine:7,tl=0xf0c248 next=(nil) 1(3985) DEBUG: retransmission_handler : request resending (t=0xf0c120, SUBSCRIB E ... ) 1(3985) DEBUG: add_to_tail_of_timer[7]: 0xf0c248 1(3985) DEBUG: retransmission_handler : done Please advice ... Thank you in advance Yannis

1 0

[Serusers] Asterisk or Seems
by Gabriela Castillo 26 Jan '05

26 Jan '05

Hi I wanted to know as he is better to use for VOICEMAIL if Asterisk or Seems. please, excuse the poor english Thanks

1 0

[Serusers] Asterisk and SER Together - Cenario and Doubt
by Felipe Martins 25 Jan '05

25 Jan '05

Hi Everyone, I want to configure the following cenario: SIP Server (SER): as a proxy server and Registrar Asterisk : for the PSTN Gateway/Vocemail/Forward/Conference Server. I've already configured SER to auth my internal users via mysql which is installed at SER server machine, the database is working fine so as users authentication. I've managed to make 2 sip cpe (SIP UACs) authenticate at my Ser server and talk to each other locally with no delay or noise. My goal is to auth an user at SER, making logic route that sees if this certain user is dialing an international call to a certain number, if that is true, forward the request to Asterisk and Asterisk does the auth using username and password of an account registered at another VoIP server (Go2Call) outside my network (this account is another one from the go2call and not one of my Ser Server). I already know that ser don't act like an UAC in this case, but I know asterisk does forwarding the request with username and password. For a more detailed view see the graph below. ---------- | Go2Call | > Outside VoIP for International Calls ---------- | | | ------------ ----- = Asterisk = > UAC (too)/Forward /PSTN/Voicemail ------------ | | ------- = SER = > Sip Proxy / Registrar / Mysql DB ------- | | ---------------- = VoIP Clients = ==> My VoIP Clients / Sip Phones ---------------- First I would like to know if it is possible, 'cause it is my first time with VoIP Technology and Software, and Second I would like to know if is there somebody that have already configured this cenario to change some ideas. I would also like to know if it's possible to do billing of my clients using cdr module from Asterisk, once my sql is working with SER to authenticate them. Linux is no problem. What i'm asking is for help and a change of ideas and confs, not for paid solutions. If someone can help me it would be really realy aprecciated. Sorry for my terrible Brazilian English. Best Regards. Felipe Martins -- Felipe Martins Linux System Administrator Tep Solution Provider Mundivox Communications Rua Lauro Muller, 116/Sala 505 RJ - Brasil - 22290-906 Tel.: 55 21 3820-8839 Fax.: 55 21 3820-8844

1 0

[Serusers] setflag() trouble
by Hendrik Scholz 25 Jan '05

25 Jan '05

Hi! I do have a setup where I call setflag(1) and save("location") afterwards as part of each REGISTER. I expect the flag to show up in the location table as flags column. For whatever reason this doesn't work (I do see the username, callid, ... though). Any hints? Thanks, Hendrik -- freenet Cityline GmbH, Hamburger Chaussee 2-4, 24114 Kiel, Germany Phone: +49 (0)431 9020552, Fax: +49 (0)431 9020559 Internet: http://www.freenet.de, eMail: hendrik.scholz(a)freenet-ag.de

4 3

[Serusers] User Auth, MySql, Radius, NAT (Newbie)
by Ozan Blotter 25 Jan '05

25 Jan '05

i've read so much lines to understand, but i couldn't find a real example how to solve my question ; * SER runs on RedHat 9.0 (no DNS) * FreeRadius and MySql installed * I can register two VOIP phones with no auth. (with sample ser.cfg) * IP's are follows; SER : 192.168.0.80 VOIP A : 192.168.0.100 VOIP B : 192.168.0.101 PUBLIC IP : 85.96.192.XXX (ADSL ROUTER/GATEWAY) With above config. the system runs but there's no auth made. * I'm gonna place SER Server onto Public IP soon and add other users and they'are all behind NAT (I can do port forwarding from their Routers) * I want to move FreeRadius and MySql onto another System (Windows XP) with IP 192.168.0.50 * I want to use PHPMyAdmin to manage database, and develop a nice webpage for users to manage their accounts etc. How can i do that and what to with ser.cfg Sorry for taking time but i'm new to SER -- >>> please do not use >>> l.s.d(a)dnaofdesign.com >>> above account is stand by >>> use same account as >>> cosmocid(a)ispro.net.tr

2 1

[Serusers] SER
by sanjaydhadda 25 Jan '05

25 Jan '05

hi anyone can help me to install SER - RTPproxy -free radius - cdrtool thanks in advance. sanjay

1 0

[Serusers] How many expresions in contact?
by edison 25 Jan '05

25 Jan '05

Hi: I am working on softswitches and majored in SIP protocol.During my works I found something confused me. In [contact] head field there are many expresions to see , and seems they are all right.So I searched multi documents to find out how many expresions are present. For example: contact: sip:john.doe@domain.com contact: sip:john.doe@domain.com:5060 contact: sip:john.doe@domain.com expires=3600 contact: sip:john.doe@127.0.0.1 And so on. I am really confused and wondered how many things can 'contact' do,how many informations can 'contact' provide? Anyone who could aguide me where I can make sure what contact do? Regards edison.

1 0

Re: [Serusers] serweb login
by Ladislav Andel 25 Jan '05

25 Jan '05

Hi Karle, thanks for the tip with rel_0_8_12. it's working without problem. Maybe it should be more emphasized on iptel.org/ser/serweb site and link it for this version . I had also some problems even with the 2004/7/27 so it might avoid problems for new users. Thank you for your help Lada ______________________________________________________________ > Od: Karel Kozlik <karel(a)iptel.org> > Komu: Ladislav Andel <ladia6(a)centrum.cz> > CC: serusers(a)lists.iptel.org > Datum: Tue, 25 Jan 2005 12:07:53 +0100 > Předmět: Re: [Serusers] serweb login > > Hi Lada, > first I recommend not to use last CVS version. It is developer unstable > and currently I am not sure if it is usable. > > Instead of this you should use version rel_0_8_12. > > cvs co -r rel_0_8_12 iptel > > However login should be working in last CVS version. I can't tell you > what is wrong, may be configuration of php. It seems that same problem > as you have more peoples, but I doesn't know why. Please if you solve > the problem, could you tell me what was wrong? > > Only thing that I can advice to you is try add to code some prints to > see if values are obtained corectly from browser. Use the: > > print_r($_POST); > > somewhere at beginning of index.php to see if values are get from html > form. And you may add some > > echo "1"; > echo "2"; > etc. > > to see flow in the script. > > Karel > > > > > > Ladislav Andel napsal(a): > > Hi list, > > I'm trying to make SERWEB working (the last CVS version), but ending with the same issue all the time. > > When I try login as admin or user it always goes to a blank white page and nothing happen. > > > > I followed the INSTALL file thoroughly and set up every mentioned detail in config files. > > Register_globals is also On in php.ini..etc. > > > > I went through entire list and haven't found my situation solution. > > It might also be a wrong set up of my apache > > I haven't got any error message either in httpd errorlog nor on the screen of my Firefox webbrowser. Everything seems to be ok. > > > > I'm attaching the names of packages I installed on my Suse Linux 9.1 > > > > php4-zlib-4.3.4-26 > > php4-mysql-4.3.4-26 > > php4-domxml-4.3.4-26 > > php4-ldap-4.3.4-26 > > php4-4.3.4-26 > > php4-devel-4.3.4-26 > > php4-pear-4.3.4-26 > > > > apache2-prefork-2.0.49-23 > > apache2-mod_php4-4.3.4-26 > > apache2-2.0.49-23 > > apache2-doc-2.0.49-23 > > > > here is sniff from ethereal: > > > > POST /serweb/html/admin/index.php HTTP/1.1 > > Host: suse.sip > > User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.7.5) Gecko/20041107 Firefox/1.0 > > Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 > > Accept-Language: cs,en-us;q=0.7,en;q=0.3 > > Accept-Encoding: gzip,deflate > > Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 > > Keep-Alive: 300 > > Connection: keep-alive > > Referer: http://suse.sip/serweb/html/admin/ > > Cookie: phplib_Session=653e0f64a2aeb8b2e4d26aa12e0ac3fc > > Content-Type: application/x-www-form-urlencoded > > Content-Length: 42 > > > > > > > > uname=admin&passw=heslo&okey.x=46&okey.y=4HTTP/1.1 200 OK > > Date: Mon, 24 Jan 2005 23:37:18 GMT > > Server: Apache/2.0.49 (Linux/SuSE) > > X-Powered-By: PHP/4.3.4 > > Pragma: no-cache > > Cache-Control: no-cache > > Expires: Mon, 26 Jul 1997 05:00:00 GMT > > Last-Modified: Mon, 24 Jan 2005 23:37:18 GMT > > Cache-Control: post-check=0, pre-check=0 > > Content-Length: 0 > > Content-Type: text/html; charset=ISO-8859-1 > > > > > > > > Does anybody have an idea whatt I'm missing or doing wrong? > > > > Lada > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers

1 0

Re: [Serusers] FW: SER Authentication Prob
by Ashling O'Driscoll 25 Jan '05

25 Jan '05

The code is commented because SER would fail when restarted if they were not. I get the below mentioned errors when I uncomment Any ideas?? Thanks, Aisling ---- Original Message ---- From: Daniel-Constantin.Mierla(a)fokus.fraunhofer.de To: ashling.odriscoll(a)cit.ie Subject: Re: [Serusers] FW: SER Authentication Prob Date: Tue, 25 Jan 2005 11:08:45 +0100 >the config you posted does not match the errors which say that the >auth_db module can't find a database module. But in you config the >line >loadmodule "/usr/lib/ser/modules/auth_db.so" is commented, so the >auth_db shouldn't be loaded. > >Anyhow, you need loadmodule "/usr/lib/ser/modules/mysql.so" to load >mysql database module. > >Daniel > >On 01/25/05 10:53, Ashling O'Driscoll wrote: > >>If it helps any bit: I got the following errors from >>/var/log/messages: >> >>mod_init(): Unable to bind database module >>init_mod(): Error while initialising module auth_db >> >>Does anyone know how the above can be solved?...Im not that familiar >>with linux so if I have to modify something, please make the >>instructions as basic as possible! >> >>Always apprecitive of help, >>Aisling. >> >>---- Original Message ---- >>From: ashling.odriscoll(a)cit.ie >>To: serusers(a)iptel.org >>Subject: FW: SER Authentication Prob >>Date: Mon, 24 Jan 2005 19:26:13 -0000 >> >>Hi all, >> >>Hope somebody can help-I really am stumped as to why this won't work >>and would really appreciate if someone could shed some light on the >>problem.... >> >>I currently have SER set up and clients are registering >successfully. >>However I want clients to authenticate before they can register. >>Howevere when I uncomment the relevant lines in the ser.cfg file, my >>clients can't register. The only thing I can think of is that SER is >>behind NAT and my clients may/may not be behind NAT....I have >>included my ser.cfg file below...I have spent along time trying to >>understand why this is happening so any help will be appreciated! >> >>Thanks, >>Aisling. >> >># >># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ >># >># simple quick-start config script >># >> >># ----------- global configuration parameters >------------------------ >> >>#debug=3 # debug level (cmd line: -dddddddddd) >>#fork=yes >>#log_stderror=no # (cmd line: -E) >> >>/* Uncomment these lines to enter debugging mode >>debug=7 >>fork=no >>log_stderror=yes >>*/ >> >>check_via=no # (cmd. line: -v) >>dns=no # (cmd. line: -r) >>rev_dns=no # (cmd. line: -R) >>port=5060 >>#children=4 >>fifo="/tmp/ser_fifo" >> >>alias=84.203.148.14 >> >># ------------------ module loading >---------------------------------- >> >># Uncomment this if you want to use SQL database >>#loadmodule "/usr/lib/ser/modules/mysql.so" >> >>loadmodule "/usr/lib/ser/modules/sl.so" >>loadmodule "/usr/lib/ser/modules/tm.so" >>loadmodule "/usr/lib/ser/modules/rr.so" >>loadmodule "/usr/lib/ser/modules/maxfwd.so" >>loadmodule "/usr/lib/ser/modules/usrloc.so" >>loadmodule "/usr/lib/ser/modules/registrar.so" >>loadmodule "/usr/lib/ser/modules/nathelper.so" >>#loadmodule "/usr/lib/ser/modules/mediaproxy.so" >>loadmodule "/usr/lib/ser/modules/textops.so" >>#loadmodule "/usr/lib/ser/modules/maxfwd.so" >> >># Uncomment this if you want digest authentication >># mysql.so must be loaded ! >>#loadmodule "/usr/lib/ser/modules/auth.so" >>#loadmodule "/usr/lib/ser/modules/auth_db.so" >> >># ----------------- setting module-specific parameters >--------------- >> >># -- usrloc params -- >> >>modparam("usrloc", "db_mode", 0) >> >># Uncomment this if you want to use SQL database >># for persistent storage and comment the previous line >>#modparam("usrloc", "db_mode", 2) >> >># -- auth params -- >># Uncomment if you are using auth module >># >>#modparam("auth_db", "calculate_ha1", yes) >># >># If you set "calculate_ha1" parameter to yes (which true in this >>config), >># uncomment also the following parameter) >># >>#modparam("auth_db", "password_column", "password") >> >># -- rr params -- >># add value to ;lr param to make some broken UAs happy >>modparam("rr", "enable_full_lr", 1) >> >>#!!Nathelper >>#modparam("registrar","nat_flag",6) >>#modparam("nathelper","natping_interval",30) #Ping intervals 30 >>seconds >>#modparam("nathelper","ping_nated_only",1) #Ping only clinets >>behind NAT >> >># -------------------------request routing logic------------------- >> >># main routing logic >> >>route{ >> >> # initial sanity checks -- messages with >> # max_forwards==0, or excessively long requests >> if (!mf_process_maxfwd_header("10")) { >> sl_send_reply("483","Too Many Hops"); >> break; >> }; >> if ( msg:len > max_len ) { >> sl_send_reply("513", "Message too big"); >> break; >> }; >> >> #############Aisling Insert################ >># #!Nat Insert >># #the below line tests if the IP of the received packet is >different >>from the IP in the via header and also >># #sees if the IP address in the contact header is private >># if (nat_uac_test("3")){ >># if (method == "REGISTER" || ! search("^Record-Route:")){ >># log("Log: Someone trying to register from private >>IP,rewriting\n"); >># # fixed_nated_contact(); #Rewrite contact with source IP >># if (method == "INVITE"){ >># fix_nated_sdp("1"); #Add direction=active to SDP >># }; >># force_rport(); # Add rport parameter to topmost Via >># setflag(6); # Mark as Nated >># }; >># }; >> ###################End##################### >> >> # we record-route all messages -- to make sure that >> # subsequent messages will go through our proxy; that's >> # particularly good if upstream and downstream entities >> # use different transport protocol >> >> if (!method == "REGISTER") record_route(); >> >> # loose-route processing >> if (loose_route()) { >> t_relay(); >> break; >> }; >> >> # if the request is for other domain use UsrLoc >> # (in case, it does not work, use the following command >> # with proper names and addresses in it) >> if (uri==myself) { >> >> if (method=="REGISTER") { >> >># Uncomment this if you want to use digest authentication >># if (!www_authorize("84.203.148.14", "subscriber")) { >># www_challenge("84.203.148.14", "0"); >># break; >># }; >> save("location"); >> break; >> }; >> >> # native SIP destinations are handled using our USRLOC DB >> if (!lookup("location")) { >> sl_send_reply("404", "Not Found"); >> break; >> }; >> }; >> >> #inserted by klaus >> if (method == "INVITE"){ >> record_route(); >> force_rtp_proxy(); >> /* set up reply processing*/ >> t_on_reply("1"); >> }; >> >> # forward to current uri now; use stateful forwarding; that >> # works reliably even if we forward from TCP to UDP >> if (!t_relay()) { >> sl_reply_error(); >> }; >> >>} >> >>#insert by klaus >> >>onreply_route[1]{ >> if (status=~"[12][0-9][0-9]") >> force_rtp_proxy(); >>} >> >>#route[1] >>#{ >> #if client or server know to be behind NAT, enable relay >># if (isflagset(6)){ >># force_rtp_proxy(); >># }; >># >># #NAT processing of replies; apply to all transaction (for example, >># #reinvites from public to private UA are hard to identify as >># #Nated at the moment of request processing); look at replies >># t_on_reply("1"); >># >># #send it out now; use stateful forwarding as it works reliably >># #even for UDP2TCP >># if(!t_relay()){ >># sl_reply_error(); >># }; >>#} >> >>#!!NatHelper >> >>#onreply_route[1]{ >>#Nated Transaction?? >>#if (isflagset(6) && status =~ "(183)\2[0-9][0-9]"){ >># #fixed_nated_contact(); >># force_rtp_proxy(); >># } >>#else if (nat_uac_test("1")){ >># fix_nated_contact(); >># }; >>#} >> >> >> >> >> >>-------------------Legal >Disclaimer--------------------------------------- >> >>The above electronic mail transmission is confidential and intended >only for the person to whom it is addressed. Its contents may be >protected by legal and/or professional privilege. Should it be >received by you in error please contact the sender at the above >quoted email address. Any unauthorised form of reproduction of this >message is strictly prohibited. The Institute does not guarantee the >security of any information electronically transmitted and is not >liable if the information contained in this communication is not a >proper and complete record of the message as transmitted by the >sender nor for any delay in its receipt. >> >>_______________________________________________ >>Serusers mailing list >>Serusers(a)iptel.org >>http://mail.iptel.org/mailman/listinfo/serusers >> >> >> > >-------------------Legal >Disclaimer--------------------------------------- > >The above electronic mail transmission is confidential and intended >only for the person to whom it is addressed. Its contents may be >protected by legal and/or professional privilege. Should it be >received by you in error please contact the sender at the above >quoted email address. Any unauthorised form of reproduction of this >message is strictly prohibited. The Institute does not guarantee the >security of any information electronically transmitted and is not >liable if the information contained in this communication is not a >proper and complete record of the message as transmitted by the >sender nor for any delay in its receipt. > -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

2 1

[Serusers] Grandstream BT100 Shows Caller ID Even With RPID privacy=full
by Java Rockx 25 Jan '05

25 Jan '05

Hi All. Does anyone know why my grandstream BT100 firmware 1.0.5.16 shows the caller ID rather than "anonymous" even though I have Remote-Part-ID enabled with privacy=full? Below is the INVITE message sent to the BT100 from a UTstarcom ATA. Regards, Paul U 2005/01/24 16:43:55.073424 68.84.xxx.xxx:5060 -> 68.84.xxx.xxx:13721 INVITE sip:3215551212@68.84.xxx.xxx:13721;user=phone SIP/2.0. Record-Route: <sip:68.84.xxx.xxx;ftag=2590080990;lr=on>. Via: SIP/2.0/UDP 68.84.xxx.xxx;branch=z9hG4bK5082.72060543.0. Via: SIP/2.0/UDP 192.168.0.86:5060;rport=1041;received=68.84.xxx.xxx;branch=z9hG4bK1403464825. From: UTStarcom <sip:4075551212@mycompany.com>;tag=2590080990. To: <sip:3215551212@mycompany.com>. Call-ID: 1980470039(a)192.168.0.86. CSeq: 1301 INVITE. Contact: <sip:4075551212@68.84.xxx.xxx:1041>. max-forwards: 16. subject: sipcall. Allow: INVITE, ACK, CANCEL, BYE, REFER, NOTIFY. Content-Type: application/sdp. Content-Length: 178. Remote-Party-ID: "Anonymous" <sip:unknown@68.84.xxx.xxx;user=phone>;party=calling;screen=yes;id-type=subscriber;privacy=full. . v=0. o=- 1363 3077 IN IP4 192.168.0.86. s=-. c=IN IP4 68.84.xxx.xxx. t=0 0. m=audio 36526 RTP/AVP 18 0 8 2 4 101. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-15. a=ptime:20. __________________________________ Do you Yahoo!? Yahoo! Mail - Helps protect you from nasty viruses. http://promotions.yahoo.com/new_mail

3 4

[Serusers] serweb login
by Ladislav Andel 25 Jan '05

25 Jan '05

Hi list, I'm trying to make SERWEB working (the last CVS version), but ending with the same issue all the time. When I try login as admin or user it always goes to a blank white page and nothing happen. I followed the INSTALL file thoroughly and set up every mentioned detail in config files. Register_globals is also On in php.ini..etc. I went through entire list and haven't found my situation solution. It might also be a wrong set up of my apache I haven't got any error message either in httpd errorlog nor on the screen of my Firefox webbrowser. Everything seems to be ok. I'm attaching the names of packages I installed on my Suse Linux 9.1 php4-zlib-4.3.4-26 php4-mysql-4.3.4-26 php4-domxml-4.3.4-26 php4-ldap-4.3.4-26 php4-4.3.4-26 php4-devel-4.3.4-26 php4-pear-4.3.4-26 apache2-prefork-2.0.49-23 apache2-mod_php4-4.3.4-26 apache2-2.0.49-23 apache2-doc-2.0.49-23 here is sniff from ethereal: POST /serweb/html/admin/index.php HTTP/1.1 Host: suse.sip User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.7.5) Gecko/20041107 Firefox/1.0 Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Language: cs,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Referer: http://suse.sip/serweb/html/admin/ Cookie: phplib_Session=653e0f64a2aeb8b2e4d26aa12e0ac3fc Content-Type: application/x-www-form-urlencoded Content-Length: 42 uname=admin&passw=heslo&okey.x=46&okey.y=4HTTP/1.1 200 OK Date: Mon, 24 Jan 2005 23:37:18 GMT Server: Apache/2.0.49 (Linux/SuSE) X-Powered-By: PHP/4.3.4 Pragma: no-cache Cache-Control: no-cache Expires: Mon, 26 Jul 1997 05:00:00 GMT Last-Modified: Mon, 24 Jan 2005 23:37:18 GMT Cache-Control: post-check=0, pre-check=0 Content-Length: 0 Content-Type: text/html; charset=ISO-8859-1 Does anybody have an idea whatt I'm missing or doing wrong? Lada

3 2

[Serusers] FW: SER Authentication Prob
by Ashling O'Driscoll 25 Jan '05

25 Jan '05

If it helps any bit: I got the following errors from /var/log/messages: mod_init(): Unable to bind database module init_mod(): Error while initialising module auth_db Does anyone know how the above can be solved?...Im not that familiar with linux so if I have to modify something, please make the instructions as basic as possible! Always apprecitive of help, Aisling. ---- Original Message ---- From: ashling.odriscoll(a)cit.ie To: serusers(a)iptel.org Subject: FW: SER Authentication Prob Date: Mon, 24 Jan 2005 19:26:13 -0000 Hi all, Hope somebody can help-I really am stumped as to why this won't work and would really appreciate if someone could shed some light on the problem.... I currently have SER set up and clients are registering successfully. However I want clients to authenticate before they can register. Howevere when I uncomment the relevant lines in the ser.cfg file, my clients can't register. The only thing I can think of is that SER is behind NAT and my clients may/may not be behind NAT....I have included my ser.cfg file below...I have spent along time trying to understand why this is happening so any help will be appreciated! Thanks, Aisling. # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" alias=84.203.148.14 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/nathelper.so" #loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/textops.so" #loadmodule "/usr/lib/ser/modules/maxfwd.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/lib/ser/modules/auth.so" #loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #!!Nathelper #modparam("registrar","nat_flag",6) #modparam("nathelper","natping_interval",30) #Ping intervals 30 seconds #modparam("nathelper","ping_nated_only",1) #Ping only clinets behind NAT # -------------------------request routing logic------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; #############Aisling Insert################ # #!Nat Insert # #the below line tests if the IP of the received packet is different from the IP in the via header and also # #sees if the IP address in the contact header is private # if (nat_uac_test("3")){ # if (method == "REGISTER" || ! search("^Record-Route:")){ # log("Log: Someone trying to register from private IP,rewriting\n"); # # fixed_nated_contact(); #Rewrite contact with source IP # if (method == "INVITE"){ # fix_nated_sdp("1"); #Add direction=active to SDP # }; # force_rport(); # Add rport parameter to topmost Via # setflag(6); # Mark as Nated # }; # }; ###################End##################### # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method == "REGISTER") record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("84.203.148.14", "subscriber")) { # www_challenge("84.203.148.14", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; #inserted by klaus if (method == "INVITE"){ record_route(); force_rtp_proxy(); /* set up reply processing*/ t_on_reply("1"); }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } #insert by klaus onreply_route[1]{ if (status=~"[12][0-9][0-9]") force_rtp_proxy(); } #route[1] #{ #if client or server know to be behind NAT, enable relay # if (isflagset(6)){ # force_rtp_proxy(); # }; # # #NAT processing of replies; apply to all transaction (for example, # #reinvites from public to private UA are hard to identify as # #Nated at the moment of request processing); look at replies # t_on_reply("1"); # # #send it out now; use stateful forwarding as it works reliably # #even for UDP2TCP # if(!t_relay()){ # sl_reply_error(); # }; #} #!!NatHelper #onreply_route[1]{ #Nated Transaction?? #if (isflagset(6) && status =~ "(183)\2[0-9][0-9]"){ # #fixed_nated_contact(); # force_rtp_proxy(); # } #else if (nat_uac_test("1")){ # fix_nated_contact(); # }; #} -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

3 2

[Serusers] Notes on converting a Cisco CM phone for SIP
by Niall O'Reilly 25 Jan '05

25 Jan '05

FWIW. I hope this may save someone some time and effort. Cisco provides documentation on how to convert a Cisco model 79XX phone from a CM configuration to a SIP configuration. I've recently converted two phones. With the first one, everything went deceptively easily. As I discovered later, this was because my TFTP server was the same system which had answered the DHCP request from the phone. This was accidental, as the LAN where the phone was connected was served by two DHCP servers: one on the same LAN, the other further away. The local one responded more quickly to the DHCP request, and happened also to be the relevant TFTP server. For the second phone, on a different LAN, a suitable local server was found which could provide the TFTP service. The DHCP servers, however, were on remote LANs. The following configuration statements were used with ISC dhcpd to point the phone at the local TFTP service. # Top of file, among global configuration statements # Define an option called 'option-150' option option-150 code 150 = ip-address; # This host is the 'first phone' mentioned above host blower { hardware ethernet 00:0f:23:00:13:3f; fixed-address 192.168.2.108; } # This host is the 'second phone' mentioned above host squawk { hardware ethernet 00:11:5c:93:ab:69; fixed-address 192.168.150.33; option tftp-server-name "local-server.example.com"; server-name "local-server.example.com"; next-server local-server.example.com; option option-150 local-server.example.com; } This section of the configuration file was developed incrementally until the phone loaded its SIP configuration. The 'server-name' and 'next-server' statements probably have no useful effect. It was simply convenient to leave them in place rather than to edit the configuration again. The 'option tftp-server-name' statement is needed once the phone has been configured for SIP, as the SIP firmware (?) uses option 66, which is set by this command, to identify the TFTP server. The 'option option-150' statement is needed before the phone has been configued for SIP, as the CM firmware uses option 150 for the same purpose. Although the Cisco document mentions option 66 as specifying the _address_ of the TFTP server, Droms' and Lemon's book describes this option as specifying the _name_ of the server; this is what the ISC server expects. Bear in mind that domain names to be passed as names in DHCP options are specified to the ISC server as quoted strings; in contrast, domain names to be passed as addresses in DHCP options are specified without quotes. Web searches for 'converting call manager phone sip' and 'droms lemon' will probably find the Cisco document and book mentioned above. Best regards, Niall O'Reilly PGP key ID: AE995ED9 (see www.pgp.net) Fingerprint: 23DC C6DE 8874 2432 2BE0 3905 7987 E48D AE99 5ED9

3 3

[Serusers] rtpproxy port range
by support 25 Jan '05

25 Jan '05

Hi, I have installed rtpproxy and ser-0.8.14 on server and it works fine. I also installed a firewall using iptables. I would like to know the "udp port range" of rtpproxy so that I can set the firewall policy on server. Thank you. Thomas

2 1

[Serusers] Callee is behind NAT, start the mediaproxy session
by Doug Eubanks 25 Jan '05

25 Jan '05

What is the easiest way if it is possible to determine if the person being calling is behind NAT and then start the media_proxy session. I have worked out that if the caller is behind NAT, start the media session, and it works great. But if the caller is not behind NAT, and the callee is, the phone rings and when you pick it up, no sound flows in either direction. Thanks, Doug

3 2

[Serusers] CONFIGURE SER with DNS
by Geniatakis Dimitrios 25 Jan '05

25 Jan '05

hello , i have install ser and a dns server. I am trying to find how to configure SER to operate with my DNS server but i cannot find any infomation could any one help my?? thanks in advance

1 0

[Serusers] serweb login
by Ladislav Andel 24 Jan '05

24 Jan '05

I forgot to mention that I'm running ser 0.8.14 , Mysql 4.0.21 Apache 2.0.49 and as I mentioned the last version of Serweb from CVS repository. thanks lada

1 0

[Serusers] SER Authentication Prob
by Ashling O'Driscoll 24 Jan '05

24 Jan '05

Hi all, Hope somebody can help-I really am stumped as to why this won't work and would really appreciate if someone could shed some light on the problem.... I currently have SER set up and clients are registering successfully. However I want clients to authenticate before they can register. Howevere when I uncomment the relevant lines in the ser.cfg file, my clients can't register. The only thing I can think of is that SER is behind NAT and my clients may/may not be behind NAT....I have included my ser.cfg file below...I have spent along time trying to understand why this is happening so any help will be appreciated! Thanks, Aisling. # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" alias=84.203.148.14 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/nathelper.so" #loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/textops.so" #loadmodule "/usr/lib/ser/modules/maxfwd.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/lib/ser/modules/auth.so" #loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #!!Nathelper #modparam("registrar","nat_flag",6) #modparam("nathelper","natping_interval",30) #Ping intervals 30 seconds #modparam("nathelper","ping_nated_only",1) #Ping only clinets behind NAT # -------------------------request routing logic------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; #############Aisling Insert################ # #!Nat Insert # #the below line tests if the IP of the received packet is different from the IP in the via header and also # #sees if the IP address in the contact header is private # if (nat_uac_test("3")){ # if (method == "REGISTER" || ! search("^Record-Route:")){ # log("Log: Someone trying to register from private IP,rewriting\n"); # # fixed_nated_contact(); #Rewrite contact with source IP # if (method == "INVITE"){ # fix_nated_sdp("1"); #Add direction=active to SDP # }; # force_rport(); # Add rport parameter to topmost Via # setflag(6); # Mark as Nated # }; # }; ###################End##################### # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method == "REGISTER") record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("84.203.148.14", "subscriber")) { # www_challenge("84.203.148.14", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; #inserted by klaus if (method == "INVITE"){ record_route(); force_rtp_proxy(); /* set up reply processing*/ t_on_reply("1"); }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } #insert by klaus onreply_route[1]{ if (status=~"[12][0-9][0-9]") force_rtp_proxy(); } #route[1] #{ #if client or server know to be behind NAT, enable relay # if (isflagset(6)){ # force_rtp_proxy(); # }; # # #NAT processing of replies; apply to all transaction (for example, # #reinvites from public to private UA are hard to identify as # #Nated at the moment of request processing); look at replies # t_on_reply("1"); # # #send it out now; use stateful forwarding as it works reliably # #even for UDP2TCP # if(!t_relay()){ # sl_reply_error(); # }; #} #!!NatHelper #onreply_route[1]{ #Nated Transaction?? #if (isflagset(6) && status =~ "(183)\2[0-9][0-9]"){ # #fixed_nated_contact(); # force_rtp_proxy(); # } #else if (nat_uac_test("1")){ # fix_nated_contact(); # }; #} -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

2 1

[Serusers] Looking for SER module.
by Ricardo Martinez 24 Jan '05

24 Jan '05

Hello list. I've heard about the LCR module for SER. Does someone knows where to find it? Thanks in advance. Regards, Ricardo Javier Martinez Ogalde

1 0

[Serusers] Radius Accounting Problem
by Doug Eubanks 24 Jan '05

24 Jan '05

I am not logging starts and stops for calls, but the stop has a session time of 0, and freeradius always logs... Mon Jan 24 15:30:07 2005 : Error: rlm_sql: Stop packet with zero session length. (user 'USERID', nas '127.0.0.1') Mon Jan 24 15:30:07 2005 : Error: rlm_radutmp: Logout for NAS localhost port 5060, but no Login record I have seen several other people have this problem on the list, but I can't find a solution to it... Thanks, Doug

1 0

[Serusers] permissions module BUG??
by Java Rockx 24 Jan '05

24 Jan '05

Hello All. I'm trying to get allow_trusted() to work but this is output to my syslog. Jan 24 14:42:55 sip01 /usr/local/sbin/ser[3308]: use_table(): Invalid parameter value Jan 24 14:42:55 sip01 /usr/local/sbin/ser[3308]: allow_trusted(): Error while trying to use trusted table My ser.cfg looks like this: modparam("permissions", "db_url", "mysql://ser:heslo@localhost/ser") modparam("permissions", "db_mode", 0) modparam("permissions", "trusted_table", "trusted") route { if (!allow_trusted()) { blah blah }; } Is this a bug with ser-0.9 from cvs?? Regards, Paul __________________________________ Do you Yahoo!? Yahoo! Mail - Helps protect you from nasty viruses. http://promotions.yahoo.com/new_mail

1 0

Re: [Serusers] Ser and Asterisk Integrated
by Felipe Martins 24 Jan '05

24 Jan '05

Hi Lode, First, thanks for the hand, I've begun with ser, and I managed to get it working fine ... but i'm still working on the routing logic routines to get closer to it, i've found a lot of information at voiwiki.org, in fact, its been a long time i didn't see so documented site. The problem is that some docs are a kind of advanced, this could be due to my total inexperience at VoIP. I've first got Asterisk because, I need it to pass username and password again to another server, it's not possible in SER. Thanks for the Live Cd and the HD erasing Warning, i'm gonna check it out to see if it applys to my needs, and I'll let you know, for sure as soon as I can get it working. Best Regards, Felipe Martins On Mon, 24 Jan 2005 15:48:08 +0100 Lode Vermeiren <lode(a)a10.be> wrote: > Hi Felipe, > > Unfortunately I can't directly help you. I am just trying to get to know > Asterisk and SER myself. What I have found is Asteriskathome (google is > your friend), a bootable cd which installs a standard asterisk system. > Watch out tough, asteriskathome by default erases the harddrive of the > system on which it is booted. > > Much info on VOIP, asterisk and SER can also be found at voipwiki.org. > > If you find more info, would you be so kind as to share it with me? I'm > also working on this, perhaps we can save each other some time. > > Best regards, > Lode Vermeiren > > > Op ma, 24-01-2005 te 10:26 -0300, schreef Felipe Martins: > > Hi everybody, > > > > I'm trying to integrate SER and Asterisk, put them to work together, ser ending SIP connections, and Asterisk acting as a REGISTRAR, logging the login attemps, passwords, and all the rest, in order to make a CDR and billing systems at asterisk. As i'm very new to VoIP and mainly to Asterisk and SER, i'm reading all the documentation I've found but I couldn't find any dox telling how to integrate them, with example config files and some graphs or something. Is there a link or Has anyone got dox on it ? > > It will be very aprecciated to have a link where I could learn it ... you know ... I'm already under pressure from the Forces ... > > > > Tnx a Lot in advance. > > > > > > > > -- Felipe Martins Linux System Administrator Tep Solution Provider Mundivox Communications Rua Lauro Muller, 116/Sala 505 RJ - Brasil - 22290-906 Tel.: 55 21 3820-8839 Fax.: 55 21 3820-8844

1 0

[Serusers] *67 and is_user_in()
by Java Rockx 24 Jan '05

24 Jan '05

Hi All. How would I properly check a user's group membership (ie, in the MySQL grp table) when the user has dialed *67 to enable caller ID blocking? The problem is the "From" header is then "anonymous" which won't work with if (is_user_in("From", "free-pstn")) { blah blah }; Regards, Paul __________________________________ Do you Yahoo!? Meet the all-new My Yahoo! - Try it today! http://my.yahoo.com

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users