- sr-users - kamailio.org

[Serusers] CVS Serweb works with which versions ?
by mr. barker 04 Feb '05

04 Feb '05

Does the CVS head of Serweb work with which versions of Serweb ? 0.8.14 ? 0.9.0 ? If not which ver of Serweb does work with each ? I have tried the one that comes with 0.8.14 and can not get that version to work at all. I have followed all the read me's and looked in the archieves . I have come to the conclusion that this version is in need of a lot of patching or something. I am able to get the interface up .. however it continually comes up with the wrong host name no matter what I do . I manally enter into the http.conf file but still does not access the db correctly and comes up with invalid user name etc .. For some reason it keeps calling up the machines name that I gave to it when I installed Linux Fedora Core 3 Other then that the rest of the system runs fine Ser is good but SerWeb seems to need work. The CVS head of SerWeb seems to quite a bit more flexable .. in the configuration files. I can get that up and going also however when it logs in I get absolutly no tabs showing up at all .. no error messages either. Racking my brain out here any help would be appreciated.. thanks

1 0

[Serusers] Fwd: Nathelper question
by testing123456 04 Feb '05

04 Feb '05

Hi Serusers, Pls, help... Regards, Trong Note: forwarded message attached. --------------------------------- Do you Yahoo!? Yahoo! Search presents - Jib Jab's 'Second Term'

1 0

Re: [Serusers] Re: [Serdev] Stop Radius Accounting on Status 404.
by Klaus Darilion 04 Feb '05

04 Feb '05

Hi Omar! Ser generates the start record when the invite transaction succeeded. When the INVITE transcation fails due to a 404, there will be no start record (except you account also failed_transactions). I think I don't understand your setup correctly. regards, Klaus PS: Please always CC to the mailing list! Mohamed Omar wrote: > I need to send the stop record even if there is no start record as > am doing prepaid billing for call to PSTN. when a UA makes a call, the > raduis athorizes the call throught the billing server. the billing > server opens an active call session for this UA and will only close this > session when it recives a stop accounting for the radius server. > > Can I use this command acc_rad_request("stop"); to force SER to send a > stop record to the radius server. I tried it but I get "command unknown > or missing module error." > > Thanks > > mohamed. > > > */Klaus Darilion <klaus.mailinglists(a)pernau.at>/* wrote: > > Hi Mohammed! > > If there is no call at all (404) why do you want to generate CRDs? If > you would send a stop record - then there would be no "start" record > for > this call. > > If you really want to account failed transcations, use the > "failed_transactions" parameter from the acc module (README). This will > produce only a "start" record - no stop record. But this is no problem, > as the status colum in this case is 404 and you only will bill records > with status 200. > > regards, > klaus > > PS: This question should be asked in the serusers mailinglist, not > serdev. > > Mohamed Omar wrote: > > How can make SER flags status 404 for accounting and send a > > stop accouting record to the radius server? > > > > Am currently doing accounting for calls going to PSTN network and > it's > > working fine if the call is not completed and if I get an error like > > status 404 then no stop accounting record is sent to the radius > server. > > > > I would like to force SER to send stop accouting flag to radius > server. > > > > Can I do this on SER 0.8.14 > > > > /*if (!lookup("location")) { > > * > > /*/ setflag(1); > > // # doesn't seem to be needed, problably because sl_send_reply > > // # acc_rad_request("stop"); > > // sl_send_reply("404", "Not Found"); > > // break; > > /* > > > > > > > > Thanks. > > > > Mohamed > > > > > > > > > > > > > ------------------------------------------------------------------------ > > Post your free ad now! *Yahoo! Canada Personals* > > > > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Serdev mailing list > > serdev(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serdev > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > > ------------------------------------------------------------------------ > Post your free ad now! *Yahoo! Canada Personals* > <http://ca.personals.yahoo.com/>

1 0

[Serusers] PSTN gateway doubt
by Luca Corti 04 Feb '05

04 Feb '05

Hello, I'm forwarding PSTN calls from ser to a CIsco AS5350. Currently I'm rewriting the address to the IP address of the AS. Is this correct? In the ser howto I can see call forwarding done with t_relay_to(): # attempt handoff to PSTN if (uri=~"^sip:9[0-9]*@mydomain.com") { ## This assumes that the caller is log("Forwarding to PSTN\n"); ## registered in our realm t_relay_to( "192.168.0.2", "5060"); ## Our Cisco router break; }; thanks Luca

2 3

[Serusers] nathelper+rtpproxy or mediaproxy ?
by Lucas Aimaretto 04 Feb '05

04 Feb '05

Just read the subject ... what is better? nathelper+rtpproxy or mediaproxy ? Regards, Lucas -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.8.5 - Release Date: 03/02/2005

1 0

[Serusers] Your mail send to biswas@stprkl.soft.net has been received.
by Mrinmoy Biswas 04 Feb '05

04 Feb '05

Your mail send to biswas(a)stprkl.soft.net has been received. Will reply as soon as I get back. Thank you. Regards, Mrinmoy Biswas

3 2

[Serusers] Your mail send to biswas@stprkl.soft.net has been received.
by Mrinmoy Biswas 04 Feb '05

04 Feb '05

Your mail send to biswas(a)stprkl.soft.net has been received. Will reply as soon as I get back. Thank you. Regards, Mrinmoy Biswas

1 0

[Serusers] Your mail send to biswas@stprkl.soft.net has been received.
by Mrinmoy Biswas 04 Feb '05

04 Feb '05

Your mail send to biswas(a)stprkl.soft.net has been received. Will reply as soon as I get back. Thank you. Regards, Mrinmoy Biswas

1 0

[Serusers] db_init() error
by Sun Shung 04 Feb '05

04 Feb '05

Hi, I m facing some problem on the connecting the database. Everytime i start its generate this error. ---------------------------------------------------------------- Feb 4 16:54:51 shung ser: ser startup succeeded Feb 4 16:54:51 shung /usr/sbin/ser[8166]: connect_db(): Client does not support authentication protocol requested by server; consider upgrading MySQL client Feb 4 16:54:51 shung /usr/sbin/ser[8166]: db_init(): Error while trying to connect database Feb 4 16:54:51 shung /usr/sbin/ser[8166]: mod_init(): Error while connecting database Feb 4 16:54:51 shung /usr/sbin/ser[8166]: init_mod(): Error while initializing module usrloc ------------------------------------------------------------- This is my ser.cfg config file ------------------------------------------------------------- modparam("usrloc", "db_mode", 2) modparam("auth_db", "db_url", "sql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("rr", "enable_full_lr", 1) ------------------------------------------------------------ Thanx alot. From sunshung _________________________________________________________________ Is your PC infected? Get a FREE online computer virus scan from McAfee® Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

2 1

[Serusers] Can't find last registered users when proxy and registrar is distributed at two machines.
by szj 04 Feb '05

04 Feb '05

Hi, All: My SER is located on two different PC. One is Registrar and RADIUS, DNS server , MySQL. the other is Proxy server only. All started successfully and run well. After a while, I registered the fourth user. Now I can call the previously registered three users with latest registered user.But failed the other direction. When I call the newly registered user with first registered user. the SER report "404 Not Found". What happens to the Registrar and Usrloc modules? I guess the problem lies in that two modules. Am I right?? Thanks for your instructions and help! Best Regards. Sun Zongjun.

1 0

[Serusers] ser and client behind nat,no audio...urgent
by Ashling O'Driscoll 04 Feb '05

04 Feb '05

I really need to sort out my nat situation with ser as soon as possible....Im beginning to believe its not doable. SER is behind nat and clients are behind nat (one on the same lan as ser) and the other on a totally different nat. Both clients register with a public address and port forwarding the nat router forwards the sip traffic to ser. I know this situation is horrible but I cant do anything about it. I have setup nathelper and rtpproxy on ser. Now if a client behind nat (which is on the same lan as ser) rings another client behind nat (on same lan as ser), then everything works fine and the audio flows. However if a lcient behind (on the same lan as ser) rings a client on behind on nat on DIFFERENT network to ser, then no audio flows. I realise this is because of that fact that they both have internal IP addresses and a middle man is needed. That is why I set up rtpproxy. But will rtpproxy work when its also behind nat??.... I've did an ethereal sniff of remote client and also of ser when calling from my client on ser lan to the remote client and the results are below. My config was a jumble of various emails from the mailing list so Im going to start from scratch and say my ser.cfg is just like the basic one included in the below link. http://www.informatik.uni-bremen.de/~prelle/terena/cookbook/Cookbook_D 2/ch04s07.html#d0e5091 Please, Please give me guidance. I know this is a horrible nat situation but i just cant figure out how to solve it or if it can be solved. Thanks, Aisling ethereal sniff of remote client (not on same lan as ser, but behind nat)xxx.xxx.xxx.xxx is my public address SIP INVITE xxx.xxx.xxx.xxx. -> 10.0.1.21 (internal address of remote client) 100 trying 10.0.1.21 -> xxx.xxx.xxx.xxx 180 ringing 10.0.1.21 -> xxx.xxx.xxx.xxx 200 ok 10.0.1.21 -> xxx.xxx.xxx.xxx rtp 10.0..1.21 -> xxx.xxx.xxx.xxx ethereal sniff of ser (with nathelper and rtpproxy) but behind nat INVITE 172.16.3.28 (internal address of client on same lan as ser) -> xxx.xxx.xxx.xxx invite xxx.xxx.xxx.xxx.172.16.3.15(internal address of ser) 100 trying 172.16.3.15 -> xxx.xxx.xxx.xxx invite 172.16.3.15 -> 157.190.70.231(public address of remote client) 100 xxx.xxx.xxx.xxx -> 172.16.3.28 100 trying 157.190.70.231 -> 172.16.3.15 icmp 172.16.3.15 -> 157.190.70.231 dest unreachable same happens for 180 ringing and 200 ok. -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

2 1

[Serusers] bug in auth db
by info＠beeplove.com 03 Feb '05

03 Feb '05

My mysql database server is different computer than my ser server. ser was not able to connect to database. I put some debug code in authdb_mod.c static int child_init(int rank) { db_handle = db_init(db_url); LOG(L_ERR, "authdb_mod.c#child_init(): db_url: %s\n", db_url); if (!db_handle) { LOG(L_ERR, "auth_db:init_child(): Unable to connect database\n"); return -1; } return 0; } I have found db_url is not getting the value from my ser.cft. Its getting the default value from config.h that was defined before compiled. I compiled my ser after editing config.h with mysql param that match my situation and my ser is up !! Thanks, -- Mohammad Khan

1 0

Re: [Serusers] SER Reliability
by Marian Dumitru 03 Feb '05

03 Feb '05

Hi Ricardo, Use the "-P" SER command line option to make SER to generate a PID file : ser -P /var/run/ser.pid Best regards, Marian Ricardo Martinez wrote: > Thanks Marian again for your help!. > I was reading the documentation for the program and it seems to do what i'm > looking for. > I have two question : > -Have you ever used this program with SER?. > -If the answer is yes : Where can i find the PID file for SER?.. i > can not find it in /var/run/. It seems that > that all the "check procces" statemenst need the PID file. > > Thanks again. > > Ricardo Martinez.- > > >>-----Mensaje original----- >>De: Marian Dumitru [mailto:marian.dumitru@voice-sistem.ro] >>Enviado el: Jueves, 03 de Febrero de 2005 16:50 >>Para: Ricardo Martinez >>CC: 'serusers(a)lists.iptel.org' >>Asunto: Re: [Serusers] SER Reliability >> >> >>Hi Ricardo, >> >>You can use "monit" to keep trace of you SER and to restart >>it if it's >>down. Monit main application is to keep trace of the web servers, but >>you can configure it for ser also. >>You can read more about monit at "http://www.tildeslash.com/monit/". >> >>Best regards, >>Marian >> >> >>Ricardo Martinez wrote: >> >>>Hello list. >>> I have a question about reliability in SER. Suppose that for >>>certain reason, the process "ser" fails, and therefore the >> >>SIP Server is >> >>>down. Is there a way to keep trace of the "ser" process >> >>status?? and if the >> >>>process is not running start a script to restart the >> >>process. I know that >> >>>maybe the "crond" command could be useful for this purpose. >> >> Does someone >> >>>have any clue about this? Or maybe SER has his own "crond" module or >>>something.? >>> I really need and advice about this issue. >>>Thanks in advance >>> >>>Regards, >>>Ricardo Martinez Ogalde.- >>> >>>_______________________________________________ >>>Serusers mailing list >>>serusers(a)lists.iptel.org >>>http://lists.iptel.org/mailman/listinfo/serusers >>> >> >>-- >>Voice System >>http://www.voice-system.ro >> -- Voice System http://www.voice-system.ro

1 0

=?iso-8859-1?Q?Re:_[Serusers]_Problems_with_Makefile????=
by info＠beeplove.com 03 Feb '05

03 Feb '05

Eric, Please follow my other tread, Evan is helping me on that. I guess, you and I having same issue. Take a look at /var/log/message.. you might get a clue ! Mohammad Eric Haskins <eric(a)rackspeed.net> wrote on 02/03/2005, 10:32:37 PM: > -- Mohammad Khan

1 0

[Serusers] Problems with Makefile???
by Eric Haskins 03 Feb '05

03 Feb '05

Hello all, I am having an issue with SER installation. When I build it, make clean - make modules - make install it seems to create /etc and other directories in /usr/local/ and it launches no problem but here is the issue Then when I shutdown SER to change .cfg /usr/local/sbin/ser stop yields Stopping SER : No PID file found!. I can see all the processes stopped. SER start yields Listening on 127.0.0.1 [127.0.0.1]:5060 216.xxx.xxx.xxx [216.xxx.xxx.xxx ]:5060 Aliases: sip:5060 sip.domain.net:5060 e4e:5060 localhost:5060 But no processes are running. ser -c = config file ok Eric

1 0

Re: [Serusers] ser dead but subsys locked
by info＠beeplove.com 03 Feb '05

03 Feb '05

My mysql connection param: host: 192.168.71.8 user: serro passwd: 47serro11 database: ser and I have put this line after loading the modules: modparam("auth_db", "db_url", "sql://serro:47serro11@192.168.71.8/ser") and still getting: Feb 3 15:38:50 croaker ser[27079]: connect_db(): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) Feb 3 15:38:50 croaker ser[27079]: db_init(): Error while trying to connect database Feb 3 15:38:50 croaker ser[27079]: mod_init(): Error while connecting database Feb 3 15:38:50 croaker ser[27079]: init_mod(): Error while initializing module usrloc What I am doing wrong? Mohammad

1 0

RE: [Serusers] Trusted IP and security. FOLLOWUP QUESTION
by Tom Lowe 03 Feb '05

03 Feb '05

When you set up a trusted IP in SER, does it use the source IP address of the INVITE UDP packet itself, or does it use the IP address contained in the FROM: field within the SIP INVITE message? Does anyone know how Cisco and other devices do it as well? Thanks! Tom

2 1

[Serusers] doubts about nathelper
by Lucas Aimaretto 03 Feb '05

03 Feb '05

I'm having trouble in using STUN with some UserAgents, which are not nat friendly at all. So, I've been reading about nathelper, but I did not find how does it work or how do I need to configure my ser.cfg to have this solution implemented. I'd like to know what it the function theory of nathelper (not about its code, but yes how does it work) and how should I need to touch my ser.cfg and also how to configure my UserAgent. Will nathelper help me with ANY UserAgent behind a NAT, no matter what kind of nat am I using and no matter whether my nat preserves or not the udp ports for the rtp connection ?? Does NAThelper impacts in the quality of the communication (QoS) ? Is NATHelper an outboundproxy ? Is NATHelper a session-border-controller ? The thing is I'm telling my UserAgent to use some XXX rtp port, but, automagically (ufff) my linksys changes the port, and so I get one-way audio. I need to solve this urgently. It gets worse if I have many UserAgents behind this nat. I've also noticed that when broadband router (d-link) does not preserve ports, and assigns them randomly, whenever the link to internet goes down and up again, my UserAgent needs to talk again with STUN to find out its port. Just a mess !!! Hope you can help me out in getting to know nathelper and configuring it. Thanx in advance Regards, Lucas -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.8.4 - Release Date: 01/02/2005

2 4

[Serusers] SER and PSAP/E911
by Evan Borgstrom 03 Feb '05

03 Feb '05

Hey All, Just wondering if anyone has had any involvement with deploying a SER installation that properly supported E911 and PSAP. I've been reading through a number of the documents on www.e911institute.org regarding their VOIP information and deployment and was curious if anyone on the list had real world experience with it, ie. rewriting dset based on DID of the user dialing 911, or even better using a IP to Location database lookup to retrieve a 911 center geographically close the user. -Evan P.S. for those curious this is a good document from the e911 site: http://www.e911institute.org/Roundtable%20and%20Tours/June%2024,%202004/VoI…

1 0

Re: Re: Re: [Serusers] ser dead but subsys locked
by info＠beeplove.com 03 Feb '05

03 Feb '05

aha.. I have found the problem ! Feb 3 13:56:02 croaker ser: WARNING: could not rev. resolve 192.168.71.3 -->> this shouldn'e be a big issue, as long as I am playing inside my local network, right? Feb 3 13:56:02 croaker ser[27023]: connect_db(): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) -->> 'ser' database is in diffent server Feb 3 13:56:02 croaker ser[27023]: db_init(): Error while trying to connect database -->> please tell me, how I will tell ser about my mysql server, including username and password. Please .. help .. Evan, thanks a lot for forwarding me in proper direction. MOhammad Evan Borgstrom <evan.borgstrom(a)ca.mci.com> wrote on 02/03/2005, 07:38:22 PM: > If you start ser (via command line) and do a 'ps' is it running? What > does /var/log/messages say? Look in the current directory as well as / > is there a core file? > > -Evan >

2 1

Re: Re: [Serusers] ser dead but subsys locked
by info＠beeplove.com 03 Feb '05

03 Feb '05

See this, [root@croaker admin]# ser -f /etc/ser/ser.cfg -c -ddd &> ser.log [root@croaker admin]# vim ser.log ## I have removed few lines from ser.log that seems unimportant. [root@croaker admin]# cat ser.log 0(26776) read 4076494534 from /dev/random 0(26776) seeding PRNG with 889008826 0(26776) test random number 1332590677 0(26776) shm_mem_init: success 0(26776) DEBUG: register_fifo_cmd: new command (print) registered 0(26776) DEBUG: register_fifo_cmd: new command (uptime) registered 0(26776) DEBUG: register_fifo_cmd: new command (version) registered 0(26776) DEBUG: register_fifo_cmd: new command (pwd) registered 0(26776) DEBUG: register_fifo_cmd: new command (arg) registered 0(26776) DEBUG: register_fifo_cmd: new command (which) registered 0(26776) DEBUG: register_fifo_cmd: new command (ps) registered 0(26776) DEBUG: register_fifo_cmd: new command (kill) registered 0(26776) loading module //lib/ser/modules/mysql.so 0(26776) loading module /lib/ser/modules/sl.so 0(26776) loading module /lib/ser/modules/tm.so 0(26776) loading module /lib/ser/modules/rr.so 0(26776) loading module /lib/ser/modules/maxfwd.so 0(26776) loading module /lib/ser/modules/usrloc.so 0(26776) loading module /lib/ser/modules/registrar.so 0(26776) loading module /lib/ser/modules/auth.so 0(26776) loading module /lib/ser/modules/auth_db.so 0(26776) set_mod_param_regex: usrloc matches module usrloc 0(26776) set_mod_param_regex: found <db_mode> in module usrloc [/lib/ser/modules/usrloc.so] 0(26776) set_mod_param_regex: auth_db matches module auth_db 0(26776) set_mod_param_regex: found <calculate_ha1> in module auth_db [/lib/ser/modules/auth_db.so] 0(26776) set_mod_param_regex: auth_db matches module auth_db 0(26776) set_mod_param_regex: found <password_column> in module auth_db [/lib/ser/modules/auth_db.so] 0(26776) find_export: found <mf_process_maxfwd_header> in module maxfwd_module [/lib/ser/modules/maxfwd.so] 0(26776) find_export: found <sl_send_reply> in module sl_module [/lib/ser/modules/sl.so] 0(26776) find_export: found <sl_send_reply> in module sl_module [/lib/ser/modules/sl.so] 0(26776) find_export: found <record_route> in module rr [/lib/ser/modules/rr.so] 0(26776) find_export: found <loose_route> in module rr [/lib/ser/modules/rr.so] 0(26776) find_export: found <t_relay> in module tm [/lib/ser/modules/tm.so] 0(26776) find_export: found <save> in module registrar [/lib/ser/modules/registrar.so] 0(26776) find_export: found <lookup> in module registrar [/lib/ser/modules/registrar.so] 0(26776) find_export: found <sl_send_reply> in module sl_module [/lib/ser/modules/sl.so] 0(26776) find_export: found <t_relay> in module tm [/lib/ser/modules/tm.so] 0(26776) find_export: found <sl_reply_error> in module sl_module [/lib/ser/modules/sl.so] 0(26776) routing table 0: 0(26776) WARNING: could not rev. resolve 192.168.71.3 config file ok, exiting... 0(26776) DEBUG: tm_shutdown : start 0(26776) DEBUG: tm_shutdown : empting hash table 0(26776) DEBUG: tm_shutdown: releasing timers 0(26776) DEBUG: tm_shutdown : removing semaphores 0(26776) DEBUG: tm_shutdown : done 0(26776) shm_mem_destroy 0(26776) destroying the shared memory lock Listening on 127.0.0.1 [127.0.0.1]:5060 192.168.71.3 [192.168.71.3]:5060 Aliases: localhost:5060 localhost.localdomain:5060 croaker:5060 [root@croaker admin]# cat /etc/ser/ser.cfg # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "//lib/ser/modules/mysql.so" loadmodule "/lib/ser/modules/sl.so" loadmodule "/lib/ser/modules/tm.so" loadmodule "/lib/ser/modules/rr.so" loadmodule "/lib/ser/modules/maxfwd.so" loadmodule "/lib/ser/modules/usrloc.so" loadmodule "/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/lib/ser/modules/auth.so" loadmodule "/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy #modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Help .. please Mohammad Evan Borgstrom <evan.borgstrom(a)ca.mci.com> wrote on 02/03/2005, 07:08:58 PM: > This means that ser has crashed... most likely a bad config file. > Try running: ser -c > > That will test your config file, you can also try ser -c -d for more > debugging info. > > -Evan > > On Thu, 2005-02-03 at 19:06 +0100, info(a)beeplove.com wrote: > > Hello List: > > > > I have able to to compile ser from source. > > I also have setup ser database. > > > > My problem is: > > > > ############################ > > [root@croaker ~]# service ser start > > [ OK ] > > [root@croaker ~]# service ser status > > ser dead but subsys locked > > ############################## > > > > This issue might have discussed before, but I was not able to find > > *Search* in archive. > > Would anybody please send me link to search in the archive. > > > > Thanks > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers -- Mohammad Khan

2 1

[Serusers] Rewriting Record-Route headers
by Evan Borgstrom 03 Feb '05

03 Feb '05

Hey all, I've implemented re-writing of URI's based on 7 & 10 digit numbers fine in SER but the problem is that our gateway that connects us to the PSTN lines is doing verification on the Record-Route headers. So when I rewrite 5551212 into 12345551212 the INVITE message shows the following and the PSTN gateway returns a 404 not found because it cant forward 5551212 to the PSTN. INVITE sip:12345551212@1.1.1.4:5060 SIP/2.0. Record-Route: <sip:5551212@1.1.1.2;ftag=4b2deae9ab74b4ebo0;lr=on>. Is there anyway to rewrite the Record-Route part of the headers? -Evan

3 4

[Serusers] ser dead but subsys locked
by info＠beeplove.com 03 Feb '05

03 Feb '05

Hello List: I have able to to compile ser from source. I also have setup ser database. My problem is: ############################ [root@croaker ~]# service ser start [ OK ] [root@croaker ~]# service ser status ser dead but subsys locked ############################## This issue might have discussed before, but I was not able to find *Search* in archive. Would anybody please send me link to search in the archive. Thanks -- Mohammad Khan

2 1

[Serusers] Error :WebGlimpse Search
by info＠beeplove.com 03 Feb '05

03 Feb '05

I was doing a search on this link: http://www.iptel.org/webglimpse/ After clicking the 'submit', I was forwarded to this page: http://www.iptel.org/cgi-bin/webglimpse/home/www/wg2?query=ser+dead+but+sub… which says, -- Glimpse Archive Configuration File not found Cannot open configuration file /home/www/wg2/archive.cfg Thanks, Mohammad Khan

1 0

Re: Re: [Serusers] Trying to install ser-0.8.14 from source
by info＠beeplove.com 03 Feb '05

03 Feb '05

Andrea Federico <andreafederico(a)mail.com> wrote on 02/03/2005, 04:34:39 PM: > if you have problem first of all you must > look in to the past seruser mail !!!! > > http://www.archivum.info/serusers%40iptel.org/2004-11/msg00515.html > Yes, I should search in the archive first!! Thank anyway, for sending the link and clearify this. Mohammad > > > > > > Nobody replied me! > > :-(( > > > > MOhammad > > > > > > > > > > info(a)beeplove.com wrote on 02/01/2005, 11:26:01 PM: > > > > > > Hello List: > > > I am trying to install ser-0.8.14 from source. > > > > > > I ran make and got the lines below: > > > > > > Makefile.rules:77: action.d: No such file or directory > > > Makefile.rules:77: crc.d: No such file or directory > > > Makefile.rules:77: data_lump.d: No such file or directory > > > Makefile.rules:77: data_lump_rpl.d: No such file or directory > > > Makefile.rules:77: dprint.d: No such file or directory > > > Makefile.rules:77: dset.d: No such file or directory > > > Makefile.rules:77: error.d: No such file or directory > > > Makefile.rules:77: fifo_server.d: No such file or directory > > > Makefile.rules:77: flags.d: No such file or directory > > > Makefile.rules:77: forward.d: No such file or directory > > > > > > Any idea, how to fix it. > > > > > > Thanks, > > > > > > -- Mohammad Khan > > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > -- > > Mohammad Khan > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > -- > ___________________________________________________________ > Sign-up for Ads Free at Mail.com > http://promo.mail.com/adsfreejump.htm -- Mohammad Khan

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users