- sr-users - kamailio.org

[Serusers] Asterisk & SER
by Ronald Wiplinger 13 Feb '05

13 Feb '05

I am new to SER! I have installed Asterisk successfully and got a hint, if I get more users I should also install SER. I have not found out what is the advantage for that and what I have to do exactly for that! Is there a (good) document out to read about SER more (instead of bothering you guys)? bye Ronald

2 1

[Serusers] problem to up service
by ivan falcon 13 Feb '05

13 Feb '05

Sir, I a new user for sip server, I've install the sip server but I start service I've a error for load database module I need help for this problem!. regards, Ivan

1 0

[Serusers] On-Reply Processing
by José Luis Peñalver Paret 13 Feb '05

13 Feb '05

Hello, I would like to know if it is possible to process positive replies. As far as I know, only negative responses can be dealt with, with failure_route. I don't want to modify the response, but I must be able to read it to extract a certain header value and insert it into a database. (In particular I am implementing a P-CSCF and I need the Service-Route header of the 200 response) I hope you can help me. Thank you.

2 1

[Serusers] Radius authentication problem
by M.V. Jaga Mohan 13 Feb '05

13 Feb '05

HI All I am trying to configure SER with Freeradius. I have downloaded SER-0.8.14 source and compiled with radius_auth, Freeradius 0.9.1 and radiusclient library 0.4.2. Radius server is working fine. when i am trying to run SER i am getting the following error : 0(7517) DEBUG: init_mod: auth_radius 0(7517) auth_radius - Initializing 0(7517) auth_radius: Error opening configuration file 0(7517) init_mod(): Error while initializing module auth_radius ERROR: error while initializing modules Just see the configuration file : # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) #Uncomment these lines to enter debugging mode debug=9 fork=no log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") #modparam("auth_radius", "service_type", 15); # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) # if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("192.168.5.1")) { www_challenge("192.168.5.1","0"); break; }; save("location"); break; # }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Please tell me what could be the problem. Thanks in advance Jagan =====

2 1

[Serusers] Some cisco phone question
by Alex 13 Feb '05

13 Feb '05

Hi all. I have some problem that mine cisco phone 7960 not sending "REGISTER" requests. If any one had that problem. Or any idea for solution. Thanks alot. --------------------------------- Do you Yahoo!? Yahoo! Search presents - Jib Jab's 'Second Term'

1 0

[Serusers] avp_radius
by mohammad 13 Feb '05

13 Feb '05

Hi ALL; Is there anybody who knows more about avp_radius module? Dose it mean "Radius based call routing" Appreciate any help and info. Regards Mohamad

3 2

RE: [Serusers] problem running modparam ("userloc", "db_mode", 2)
by Klaus Feichtinger 13 Feb '05

13 Feb '05

.try changing from sql to mysql in the db_url. In my case that helped very much (e.g. modparam("usrloc", "db_url", "mysql://ser:heslo@10.2.1.1/ser") klaus >I'm starting to run mysql on another server and then I was not able to run ser with: > >modparam ("userloc", "db_mode", 2) >or >modparam ("userloc", "db_mode", 1) > >In ser.cfg I have inserted: >modparam("usrloc", "db_url", "sql://ser:heslo@10.2.1.1/ser") >and >modparam("auth_db", "db_url", "sql://ser:heslo@10.2.1.1/ser") > > >what id the problem? >thanks

1 0

[Serusers] i need some help
by Welesley Sibelson Dias 12 Feb '05

12 Feb '05

i have one system with SER --->B2BUA ---SER ---- PSTN but b2bua have one problem is from vovida and accept any connection from any host one solution i have search is put b2bua into private network and redirect to ser, but i have receive 500 interserver error somebody have some know using b2bua to more security thks best regards

1 0

[Serusers] problem running modparam ("userloc", "db_mode", 2)
by Rosario Pingaro 12 Feb '05

12 Feb '05

I'm starting to run mysql on another server and then I was not able to run ser with: modparam ("userloc", "db_mode", 2) or modparam ("userloc", "db_mode", 1) In ser.cfg I have inserted: modparam("usrloc", "db_url", "sql://ser:heslo@10.2.1.1/ser") and modparam("auth_db", "db_url", "sql://ser:heslo@10.2.1.1/ser") what id the problem? thanks

1 0

[Serusers] ser.cfg
by sai latha 12 Feb '05

12 Feb '05

Hi When i am configure ser.cfg it shows errors please tell me any one those errors are:- 0(3722) DEBUG: init_mod: auth_radius 0(3722) auth_radius - Initializing 0(3722) auth_radius: Error opening configuration file 0(3722) init_mod(): Error while initializing module auth_radius ERROR: error while initializing modules -------------------------------------------- my configuration file is -------------------------------------------- # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) #Uncomment these lines to enter debugging mode debug=8 fork=yes log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius", "service_type", 15) # ------------------------- request routing logic ------------------- route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # authenticate register message using radius if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "0"); break; }; save("location"); break; }; # route (proxy) invite message to gateway # if (method=="INVITE") || (method=="CANCEL") { # Uncomment this if you want to use digest authentication # if (!radius_www_authorize("")) { # www_challenge("", "0"); # break; # }; if (method=="INVITE") || (method=="CANCEL") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "0"); break; }; record_route(); # rewritehostport("cisco_sip_gw_ip:5060"); if (!t_relay()) { sl_reply_error(); }; break; }; } please send me Thank u Sailatha __________________________________ Do you Yahoo!? Yahoo! Mail - Easier than ever with enhanced search. Learn more. http://info.mail.yahoo.com/mail_250

1 0

[Serusers] ser.cfg
by sai latha 12 Feb '05

12 Feb '05

Hi when i configured ser.cfg it show the errors please any one send me the ser.cfg configuration file radiusclient - 0.4.1 ser - 0.8.14 these are the versions Please send me thank u Sailatha __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Serusers] REGISTER TIMERS
by Ricardo Martinez 11 Feb '05

11 Feb '05

Hello list. Is there a default or recommendable pair-of-timers-REGISTER settings, for SER and endpoints. I'm using Linksys, and SER, the Linksys are PAP2 and the majority of theses endpoints are NAT'd. I would really appreciate and advice on this. Thanks Ricardo Martinez.-

2 1

[Serusers] Setting timeout in SER
by scm-j＠nuntius.com 11 Feb '05

11 Feb '05

When I receive a SIP INVITE from my service provider, the normal call flow is for SER to forward it to my Asterisk for authentication. However, if the Asterisk is down, SER keeps attempting by sending multiple INVITEs to Asterisk, until it receives a CANCEL from the service provider. The preferred behavior is for SER to give up after 2-3 unsuccessful attempts and send a "503 Service Unavailable" message back to the service provider. Is there a way to do this in ser.cfg or anywhere else in SER? Any examples would be much appreciated. Regards, SCM

3 2

[Serusers] CPL proxy timeout
by Terry Wilson 11 Feb '05

11 Feb '05

Sorry for a touch of a cross-post (I posted a similar quetion to serdev), but I don't know if I should have posted to ser-users instead in the first place. Again, my apologies. I have previously ready posts about the CPL proxy timeout value being ignored because of a lack of ability in the tm module. After reading some posts about being able to set dynamic invite timers via avp, it looks like tm should handle this type of thing fine. (Again forgive me, I have only started sifting through the SER code this week--trying to wrap my head around it all). Since tm can support dynamic timers, is there a way to modify the cpl handling code to set the callee invite timer to the value in the CPL proxy timeout? I ask because we are currently routing all calls from endpoints through ser, to one of several asterisk boxes to handle the dialplan (ring phone for n seconds then do x type stuff), and then back out to ser. Since asterisk isn't a sip proxy, you get all kinds of fun problems when a call is routed in such a way that one leg is on one asterisk box, and the other on another and then a transfer takes place. We would love to be able to handle all of our dialplan stuff in CPL, but have to be able to do things like "Call my phone for 10 seconds, then ring these 3 phones for 10 seconds if I don't answer", etc. It looks like CPL should handle this kind of thing perfectly--except setting the timeout for a call to roll to noanswer based on destination. I can't be setting these rules directly in the ser.cfg because I have lots of endpoints, and they can change how long their phone rings etc. through a web interface. Is this type of behaviour already supported in some other way? Is it possible to relatively easily add the proxy timeout support to CPL by having it set the timeout using AVP? (btw, what does that acronym stand for?) Are there not many people that would benefit from this type of modification (i.e. do I need to brush up on my C skills :-) )? Any info would be greatly appreciated. Thanks!

3 3

[Serusers] SER with 3rd party billing
by Dipole Moment 11 Feb '05

11 Feb '05

Hi all, I'm planning to use SER with a 3rd party billing platform that understands Cisco VSA as described here http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/vapp_dev/vs…. I've been looking into RADIUS implementation in SER and looks like it cannot be used out of the box, there's no support for authorization and native RADIUS authentication, only digest. Before I go on and add necessary code to auth_radius module, I'd like to know if anyone has implemented it and would like to share/sell his code. Thanks.

3 2

[Serusers] Call forwarding problem
by Evan Borgstrom 11 Feb '05

11 Feb '05

Hey, I've got all my call forwarding stuff setup in ser using the avpops module and everything works as expected. I can dial a sequence and store the call forwarding numbers in the database and when calls come I can retrieve the info and change the RURI using avp_pushto. The problem is this, and I'm wondering if I'm missing something or I need to goto our transit gw vendor. - 12223334444 & 12223334445 are PSTN numbers - 13334445555 is a SIP number registered with ser 1. inbound call : 12223334444 -> 13334445555 2. ser receives the invite and checks the avpops table 3. ruri is re-written to contain 12223334445 and a route() statement is called to forward the call back out the PSTN gateway 4. the transit gw never responds to the invite because the Cseq field follows that of the previous invite the transit gw sent to us and it's not expecting an invite. 5. the inbound call is finally cancelled and the transaction ends as expected. Should I be doing something else before I rewritehostport and forward back to PSTN or is it something the vendor should be doing but that's not happening? Any insight is appreciated. -Evan

2 1

[Serusers] ser 0.9.0 crashed (bug??)
by Francesco Bottà 11 Feb '05

11 Feb '05

Hi all, my SER Proxy is crashed. My SER version is: ser -V version: ser 0.9.0 (i386/linux) flags: STATS: Off, EXTRA_DEBUG, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.197 2004/12/03 19:09:31 andrei Exp $ main.c compiled on 10:35:08 Feb 7 2005 with gcc 3.3 and here the bt of the coredump file: #0 0x4005c1b1 in kill () from /lib/libc.so.6 (gdb) bt #0 0x4005c1b1 in kill () from /lib/libc.so.6 #1 0x4005bde5 in raise () from /lib/libc.so.6 #2 0x4005d5a8 in abort () from /lib/libc.so.6 #3 0x0805a3e6 in sig_alarm_abort (signo=14) at main.c:428 #4 <signal handler called> #5 0x400f8927 in sched_yield () from /lib/libc.so.6 #6 0x402a2afa in get_lock (lock=0x404f3b58) at fastlock.h:148 #7 0x402a2874 in lock_udomain (_d=0x404f3b38) at udomain.c:438 #8 0x402a277e in timer_udomain (_d=0x404f3b38) at udomain.c:403 #9 0x4029e0c4 in synchronize_all_udomains () at dlist.c:321 #10 0x402a5d18 in destroy () at ul_mod.c:280 #11 0x08074f1b in destroy_modules () at sr_module.c:356 #12 0x08059fef in cleanup (show_status=1) at main.c:355 #13 0x0805aae3 in handle_sigs () at main.c:514 #14 0x0805c424 in main_loop () at main.c:1167 #15 0x0805d058 in main (argc=3, argv=0xbffff814) at main.c:1568 Any suggestions? Many thanx Verbal

2 1

[Serusers] Some authentication question
by Alex 11 Feb '05

11 Feb '05

Hi all I have some problems with ser.conf, i would like to know how i can check if user exist in subscriber table. I have some radius authentication -> This only athenticate the users. But i would like also to check if the user exist in subscriber table before i can give him permissions to call out. Thanks for the help. --------------------------------- Do you Yahoo!? Yahoo! Mail - 250MB free storage. Do more. Manage less.

2 1

[Serusers] Deteriming if caller=callee
by Steve Blair 11 Feb '05

11 Feb '05

Hello: I am trying determine if the called number equals the called number in my SER 0.8.14 stable proxy. I've tried several combinations of check_to and check_from without success. Mailing lists articles on this topic seem to refer to features in development or 0.9 branches. Is it possible to check for this condition in the above release? If so a hint on how to do it would help. Thanks,Steve

2 2

[Serusers] serctl moni question : REGISTER PROBLEM?
by Ricardo Martinez 11 Feb '05

11 Feb '05

Thanks Chris. Now you mention, in fact i was doing some ethereal debugs and i have found some problems with my REGISTER's messages, specially from NAT'd endpoints. Could this be the cause of the increasing number of "WAITING" in my monitor? I'm seeing this debug from a REGISTER transaction:: U 200.xx.xx.xx:5060 -> xx.xx.154.35:5060 REGISTER sip:sip.mydomain.com SIP/2.0. Via: SIP/2.0/UDP 200.xx.xx.xx:5060;branch=z9hG4bK-a2202b91. From: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=a5e753635c69bee8o0. To: 5555848141 <sip:5555848141@sip.mydomain.com>. Call-ID: 316c6f5b-e5ea970f(a)192.168.0.104. CSeq: 33 REGISTER. Max-Forwards: 70. Authorization: Digest username="Username1",realm="sip.mydomain.com",nonce="420d1c9d4b50d5cd531d756 e150514fdf7075880",uri="sip:5555848141@sip.mydomain.com",algorithm=MD5,respo nse="075c1cee957db126b0ea06ac88b25f22",qop=auth,nc=00000002,cnonce="394307ed ". Contact: 5555848141 <sip:5555848141@200.xx.xx.xx:5060>;expires=600. Warning: 399 spa "Restricted Cone NAT Dectected". User-Agent: Linksys/RT31P2-2.0.10(LIc). Content-Length: 0. Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER. Supported: x-sipura. . ## U xx.xx.154.35:5060 -> 200.xx.xx.xx:5060 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP 200.xx.xx.xx:5060;branch=z9hG4bK-a2202b91. From: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=a5e753635c69bee8o0. To: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=6eb14299de2cc731d173c135064daec5.4858. Call-ID: 316c6f5b-e5ea970f(a)192.168.0.104. CSeq: 33 REGISTER. WWW-Authenticate: Digest realm="sip.mydomain.com", nonce="420d1ef86fb6cf9709576f1e81b628556d3c932e", qop="auth", stale=true. Server: Sip EXpress router (0.8.14-3 (i386/linux)). Content-Length: 0. Warning: 392 xx.xx.154.35:5060 "Noisy feedback tells: pid=18215 req_src_ip=200.xx.xx.xx req_src_port=5060 in_uri=sip:sip.mydomain.com out_uri=sip:sip.mydomain.com via_cnt==1". . ## U 200.xx.xx.xx:5060 -> xx.xx.154.35:5060 REGISTER sip:sip.mydomain.com SIP/2.0. Via: SIP/2.0/UDP 200.xx.xx.xx:5060;branch=z9hG4bK-a2202b91. From: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=a5e753635c69bee8o0. To: 5555848141 <sip:5555848141@sip.mydomain.com>. Call-ID: 316c6f5b-e5ea970f(a)192.168.0.104. CSeq: 33 REGISTER. Max-Forwards: 70. Authorization: Digest username="Username1",realm="sip.mydomain.com",nonce="420d1c9d4b50d5cd531d756 e150514fdf7075880",uri="sip:5555848141@sip.mydomain.com",algorithm=MD5,respo nse="c145f825cc6c14e1e27b6b17f1b2c332",qop=auth,nc=00000003,cnonce="394307ed ". Contact: 5555848141 <sip:5555848141@200.xx.xx.xx:5060>;expires=600. Warning: 399 spa "Restricted Cone NAT Dectected". User-Agent: Linksys/RT31P2-2.0.10(LIc). Content-Length: 0. Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER. Supported: x-sipura. . ## U xx.xx.154.35:5060 -> 200.xx.xx.xx:5060 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP 200.xx.xx.xx:5060;branch=z9hG4bK-a2202b91. From: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=a5e753635c69bee8o0. To: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=6eb14299de2cc731d173c135064daec5.4858. Call-ID: 316c6f5b-e5ea970f(a)192.168.0.104. CSeq: 33 REGISTER. WWW-Authenticate: Digest realm="sip.mydomain.com", nonce="420d1ef86fb6cf9709576f1e81b628556d3c932e", qop="auth", stale=true. Server: Sip EXpress router (0.8.14-3 (i386/linux)). Content-Length: 0. Warning: 392 xx.xx.154.35:5060 "Noisy feedback tells: pid=18214 req_src_ip=200.xx.xx.xx req_src_port=5060 in_uri=sip:sip.mydomain.com out_uri=sip:sip.mydomain.com via_cnt==1". . ## U 200.xx.xx.xx:5060 -> xx.xx.154.35:5060 REGISTER sip:sip.mydomain.com SIP/2.0. Via: SIP/2.0/UDP 200.xx.xx.xx:5060;branch=z9hG4bK-a2202b91. From: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=a5e753635c69bee8o0. To: 5555848141 <sip:5555848141@sip.mydomain.com>. Call-ID: 316c6f5b-e5ea970f(a)192.168.0.104. CSeq: 33 REGISTER. Max-Forwards: 70. Authorization: Digest username="Username1",realm="sip.mydomain.com",nonce="420d1c9d4b50d5cd531d756 e150514fdf7075880",uri="sip:5555848141@sip.mydomain.com",algorithm=MD5,respo nse="c145f825cc6c14e1e27b6b17f1b2c332",qop=auth,nc=00000003,cnonce="394307ed ". Contact: 5555848141 <sip:5555848141@200.xx.xx.xx:5060>;expires=600. Warning: 399 spa "Restricted Cone NAT Dectected". User-Agent: Linksys/RT31P2-2.0.10(LIc). Content-Length: 0. Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER. Supported: x-sipura. . ## U xx.xx.154.35:5060 -> 200.xx.xx.xx:5060 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP 200.xx.xx.xx:5060;branch=z9hG4bK-a2202b91. From: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=a5e753635c69bee8o0. To: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=6eb14299de2cc731d173c135064daec5.4858. Call-ID: 316c6f5b-e5ea970f(a)192.168.0.104. CSeq: 33 REGISTER. WWW-Authenticate: Digest realm="sip.mydomain.com", nonce="420d1ef937646ad8e71e1c566161be30607c89da", qop="auth", stale=true. Server: Sip EXpress router (0.8.14-3 (i386/linux)). Content-Length: 0. Warning: 392 xx.xx.154.35:5060 "Noisy feedback tells: pid=18215 req_src_ip=200.xx.xx.xx req_src_port=5060 in_uri=sip:sip.mydomain.com out_uri=sip:sip.mydomain.com via_cnt==1". . ## U 200.xx.xx.xx:5060 -> xx.xx.154.35:5060 REGISTER sip:sip.mydomain.com SIP/2.0. Via: SIP/2.0/UDP 200.xx.xx.xx:5060;branch=z9hG4bK-14bd512b. From: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=a5e753635c69bee8o0. To: 5555848141 <sip:5555848141@sip.mydomain.com>. Call-ID: 316c6f5b-e5ea970f(a)192.168.0.104. CSeq: 34 REGISTER. Max-Forwards: 70. Authorization: Digest username="Username1",realm="sip.mydomain.com",nonce="420d1ef86fb6cf9709576f1 e81b628556d3c932e",uri="sip:5555848141@sip.mydomain.com",algorithm=MD5,respo nse="901a43b3665d197579ed76483032841d",qop=auth,nc=00000001,cnonce="97900177 ". Contact: 5555848141 <sip:5555848141@200.xx.xx.xx:5060>;expires=600. Warning: 399 spa "Restricted Cone NAT Dectected". User-Agent: Linksys/RT31P2-2.0.10(LIc). Content-Length: 0. Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER. Supported: x-sipura. . ## U xx.xx.154.35:5060 -> 200.xx.xx.xx:5060 SIP/2.0 200 OK. Via: SIP/2.0/UDP 200.xx.xx.xx:5060;branch=z9hG4bK-14bd512b. From: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=a5e753635c69bee8o0. To: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=6eb14299de2cc731d173c135064daec5.3c44. Call-ID: 316c6f5b-e5ea970f(a)192.168.0.104. CSeq: 34 REGISTER. Contact: <sip:5555848141@200.xx.xx.xx:5060>;q=0.00;expires=600. Server: Sip EXpress router (0.8.14-3 (i386/linux)). Content-Length: 0. Warning: 392 xx.xx.154.35:5060 "Noisy feedback tells: pid=18214 req_src_ip=200.xx.xx.xx req_src_port=5060 in_uri=sip:sip.mydomain.com out_uri=sip:sip.mydomain.com via_cnt==1". . #### U 200.xx.xx.xx:5060 -> xx.xx.154.35:5060 REGISTER sip:sip.mydomain.com SIP/2.0. Via: SIP/2.0/UDP 200.xx.xx.xx:5060;branch=z9hG4bK-14bd512b. From: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=a5e753635c69bee8o0. To: 5555848141 <sip:5555848141@sip.mydomain.com>. Call-ID: 316c6f5b-e5ea970f(a)192.168.0.104. CSeq: 34 REGISTER. Max-Forwards: 70. Authorization: Digest username="Username1",realm="sip.mydomain.com",nonce="420d1ef86fb6cf9709576f1 e81b628556d3c932e",uri="sip:5555848141@sip.mydomain.com",algorithm=MD5,respo nse="c03835111b84859ce7a63a83f9ef5045",qop=auth,nc=00000002,cnonce="97900177 ". Contact: 5555848141 <sip:5555848141@200.xx.xx.xx:5060>;expires=600. Warning: 399 spa "Restricted Cone NAT Dectected". User-Agent: Linksys/RT31P2-2.0.10(LIc). Content-Length: 0. Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER. Supported: x-sipura. . ## U xx.xx.154.35:5060 -> 200.xx.xx.xx:5060 SIP/2.0 200 OK. Via: SIP/2.0/UDP 200.xx.xx.xx:5060;branch=z9hG4bK-14bd512b. From: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=a5e753635c69bee8o0. To: 5555848141 <sip:5555848141@sip.mydomain.com>;tag=6eb14299de2cc731d173c135064daec5.3c44. Call-ID: 316c6f5b-e5ea970f(a)192.168.0.104. CSeq: 34 REGISTER. Contact: <sip:5555848141@200.xx.xx.xx:5060>;q=0.00;expires=600. Server: Sip EXpress router (0.8.14-3 (i386/linux)). Content-Length: 0. Warning: 392 xx.xx.154.35:5060 "Noisy feedback tells: pid=18216 req_src_ip=200.xx.xx.xx req_src_port=5060 in_uri=sip:sip.mydomain.com out_uri=sip:sip.mydomain.com via_cnt==1". . Can someone help me to understand why this is happening. I don't understand why my endpoint is sending the REGISTER message with the Authentication parameters!!? I really hope that someone can help me!!! Thanks in advance. Ricardo Javier Martinez Ogalde > -----Mensaje original----- > De: Chris [mailto:ser@cannes.f9.co.uk] > Enviado el: Viernes, 11 de Febrero de 2005 15:16 > Para: 'Ricardo Martinez'; serusers(a)lists.iptel.org > Asunto: RE: [Serusers] serctl moni question. > > > I had it once (350 waiting) when I was running on a very old slow PII > machine > and I had a UA trying to re-register continuously after failure. > use ethereal to see what is coming into to your ser. > Mine was fixed by stopping continuous retries without gap > and making register succeed :)) > Chris > > -----Original Message----- > From: serusers-bounces(a)lists.iptel.org > [mailto:serusers-bounces@lists.iptel.org] On > Behalf Of Ricardo Martinez > Sent: 11 February 2005 20:06 > To: 'serusers(a)lists.iptel.org' > Subject: RE: [Serusers] serctl moni question. > > Hello again. > Have anyone idea about this issue? > Thanks! > > Ricardo Martinez.- > > > > > -----Mensaje original----- > > De: Ricardo Martinez [mailto:rmartinez@redvoiss.net] > > Enviado el: Jueves, 10 de Febrero de 2005 16:29 > > Para: 'serusers(a)lists.iptel.org' > > Asunto: [Serusers] serctl moni question. > > > > > > Hello list. > > I used the "serctl moni" command and i have found these > > statistics : > > > > > > Transaction Statistics > > Current: 0 (40 waiting) Total: 584 (0 local) > > Replied localy: 1082 > > Completion status 6xx: 27, 5xx: 7, 4xx: 212, 3xx: 0,2xx: 356 > > > > I'm particular interested in the Transactions Statics - > > Current and the 40 > > Waiting. > > Does this means something? > > > > Thanks in advance. > > > > Ricardo Martinez > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.8.7 - Release Date: 10/02/2005 > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.8.7 - Release Date: 10/02/2005 > >

1 0

[Serusers] HELPME SER+NATHELPER+RTPPROXY
by Sergio Gerardo Festa 11 Feb '05

11 Feb '05

Hello it help that version I have to use so that operate correctly SER+NAT+RTPPROXY SER version =? Nathelper version =? Rtpproxy version=? thanks Saludos. borro

2 1

Re: [Serusers] accessing mySQL db by means of external scripts...
by Esteban Maestre 11 Feb '05

11 Feb '05

Hi Marian, so I have to look into the internal DB API if I want to know the commands, isn't it? where can I find informaction on the internal DB API? In the code itself? Imagine I want to use the table 'preferences' -currently unused by my configuration, but created by the script- in a way I define, so I could store some users' preferences, like, for instance, which users I don't want to receive SUBSCRIBEs from, whether I want not to receive receive calls from a concrete user, etc... A user is able, my means of an instant message, activate and deactivate these preferences following concrete syntax format. Am I trying to do something wrong accessing DB by means of mySQL queries from external scripts called by means of 'exec' module? I don't know whether there is a simpler way to do so... Thanks again, Esteban > Hi Esteban, > > if you want to use DB transparently to which backend SER use, try the DB fifo commands - all commands from the internal DB API are exported via FIFO server. > > Best regards, > Marian > > Esteban Maestre wrote: >> Hi, SERusers... >> >> I have a question: in case i want to access and write into mySQL ser database tables from an external script I call by using exec_msg(), will this data remain there permanently? Will SER overwrite it? >> >> Thanks in advance... :) >> >> >> Esteban >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> > > -- > Voice System > http://www.voice-system.ro > > >

2 1

[Serusers] pa and some things I've noticed, using ser 0.9.0
by Conny Holzhey 11 Feb '05

11 Feb '05

Hi all, I'm running ser on a port diffrent from 5060, and I found some confusing behaviour when dealing with presence. I've set the port in the ser.cfg file to 5059. When sending a PUBLISH message, it seems that I have to specify the port number in the message start-line, i.e. the message starts with PUBLISH sip:conny@192.168.123.2:5059 SIP/2.0, and then ser answers with 200 ok. If I skip the port number, I get a 408, Request Timeout. Is there some configuration I'm missing that would fix this? Or is this the correct behaviour? Actually I don't think that there should be a port number in the PUBLISH, as this is mixing my (client) Request-URI with the server port number. But I'm not sure, because so far I've tested my client only on the same machine than the server, and this is sometimes a bit confusing.... Same thing seems to be with REGISTER, and SUBSCRIBE, i.e. sending SUBSCRIBE sip:user@192.168.123.2:5059 SIP/2.0 works for some reason. When I get a NOTIFY from ser, there is a minor issue with the pidf document, the tuple start tag looks like <tuple id="9r28r49">ser"> When sending a subscribe with a header Expires: 0, ser seemingly doesn't send a NOTIFY. This makes sense, as this is used to indicate that the client wants to un-subscribe. On the other hand RFC 3856 says: > The subscriber can terminate the subscription by sending a SUBSCRIBE, > within the dialog, with an Expires header field (which indicates > duration of the subscription) value of zero. This causes an > immediate termination of the subscription. A NOTIFY request is then > generated by the presence agent with the most recent state. > > Is there somewhere a public server running ser/pa that I could use for testing my command-line PUA? Regards, Conny -- I'm looking for a job! Specially in telecommunication software development, testing, design, management ... preferably contract, in germany or somewhere nice. Anyone able to help, please contact me via http://holzhey.de, thanks.

2 2

RE: [Serusers] serctl moni question.
by Ricardo Martinez 11 Feb '05

11 Feb '05

Hello again. Have anyone idea about this issue? Thanks! Ricardo Martinez.- > -----Mensaje original----- > De: Ricardo Martinez [mailto:rmartinez@redvoiss.net] > Enviado el: Jueves, 10 de Febrero de 2005 16:29 > Para: 'serusers(a)lists.iptel.org' > Asunto: [Serusers] serctl moni question. > > > Hello list. > I used the "serctl moni" command and i have found these > statistics : > > > Transaction Statistics > Current: 0 (40 waiting) Total: 584 (0 local) > Replied localy: 1082 > Completion status 6xx: 27, 5xx: 7, 4xx: 212, 3xx: 0,2xx: 356 > > I'm particular interested in the Transactions Statics - > Current and the 40 > Waiting. > Does this means something? > > Thanks in advance. > > Ricardo Martinez > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

2 1

Re: [Serusers] file missing -> init.d
by info＠beeplove.com 11 Feb '05

11 Feb '05

Armando Alvarez <armando.alvarez(a)tripcomm.com> wrote on 02/11/2005, 06:32:56 PM: > Armando, 1. get a source copy of SER. 2. Unzip it 3. go to rpm directory 4. look for ser.init thats the file you need for init.d Let me know, if you need further help regarding this. -- Mohammad Khan sip:beeplove@iptel.org

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users