- sr-users - kamailio.org

[Serusers] Mediaproxy error
by Terry Mac Millan 02 Mar '05

02 Mar '05

Good day, I am trying to get the sample config of the media proxy up and going. I have added the few modules needed to my config and replaced my entire route section with the current route section from the config file in the mediaproxy modules config directory. Once I start it up I get the following error: /var/log/debug:Mar 2 11:52:06 hostthe3rd ser: find_export: <is_from_local> not found /var/log/debug:Mar 2 11:52:06 hostthe3rd ser: find_export: <is_uri_host_local> not found I have the module mediaproxy being loaded earlier in the debug file. These 2 lines are the only lines coming up as being not found commands in any module. Below is the copy of the config I am running, I do realize that it is a bit full of other items and will be hopefully adding more to the config once I get this part working. Is there something that I am missing? I am running ser-0.8.14 on a Linux system. My ultimate goal is to have ser running to allow connections from both Internet IP'd phones and Nat based phones with voicemail support using sems. Terry --- Attached ser.cfg file --- # ------------- version 0.8.11-0 # ------------- Initial global variables debug=7 fork=yes log_stderror=no listen=216.94.106.12 listen=127.0.0.1 # hostname matching an alias will satisfy the condition uri==myself". # dns - Uses dns to check if it is necessary to add a "received=" field # to a via. Default is no. # rev_dns - Same as dns but use reverse DNS. dns=no rev_dns=no port=5061 children=4 # check_via - Turn on or off Via host checking when forwarding replies. # Default is no. arcane. looks for discrepancy between name and # ip address when forwarding replies. check_via=yes # syn_branch - Shall the server use stateful synonym branches? It is # faster but not reboot-safe. Default is yes. #syn_branch=yes # memlog - Debugging level for final memory statistics report. Default # is L_DBG -- memory statistics are dumped only if debug is set high. memlog=3 # sip_warning - Should replies include extensive warnings? By default # yes, it is good for trouble-shooting. sip_warning=yes # fifo - FIFO special file pathname fifo="/tmp/ser_fifo" # server_signature - Should locally-generated messages include server's # signature? By default yes, it is good for trouble-shooting. server_signature=yes # reply_to_via - A hint to reply modules whether they should send reply # to IP advertised in Via. Turned off by default, which means that # replies are sent to IP address from which requests came. reply_to_via=no # user | uid - uid to be used by the server. 99 = nobody. #uid="sip" # group | gid - gid to be used by the server. 99 = nobody. gid="sip" # mhomed -- enable calculation of outbound interface; useful on # multihomed servers. mhomed=0 # ------------- external module loading loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/exec.so" loadmodule "/usr/local/lib/ser/modules/group.so" loadmodule "/usr/local/lib/ser/modules/print.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/mediaproxy.so" # ------------- tm parameters modparam("tm", "fr_timer", 12) modparam("tm", "fr_inv_timer", 24) # ------------- rr parameters # set ";lr" tag to ";lr=true" modparam("rr", "enable_full_lr", 1) # ------------- accounting parameters modparam("acc", "db_missed_flag", 3) modparam("acc", "db_flag", 1) modparam("acc", "log_missed_flag", 3) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_url", "sql://ser:2002suckz@localhost/ser") modparam("acc", "report_cancels", 0) modparam("acc", "report_ack", 0) modparam("acc", "log_fmt", "cdfimorstup") modparam("acc", "failed_transactions", 1) # ------------- usrloc parameters # 2 enables write-back to persistent mysql storage for speed # disable=0, write-through=1 modparam("usrloc", "db_mode", 2) # minimize write back window - default is 60 seconds modparam("usrloc", "timer_interval", 10) # database location modparam("usrloc", "db_url", "sql://ser:2002suckz@localhost/ser") # ------------- auth parameters # database location modparam("auth_db", "db_url", "sql://ser:2002suckz@localhost/ser") # allows clear text passwords in the mysql database modparam("auth_db", "calculate_ha1", yes) # name of password column in mysql database modparam("auth_db", "password_column", "password") # Example ser.cfg for mediaproxy functionality #loadmodule "/usr/local/lib/ser/modules/registrar.so" #loadmodule "/usr/local/lib/ser/modules/domain.so" modparam("mediaproxy", "natping_interval", 60) modparam("registrar", "nat_flag", 2) route{ if (!mf_process_maxfwd_header("10")) { if (method!="ACK") { sl_send_reply("483", "Too many hops"); }; break; }; if (msg:len >= max_len) { if (method!="ACK") { sl_send_reply("513", "Message too big"); }; break; }; if (method=="REGISTER") { if (is_from_local()) { # Mark as NAT'ed if (client_nat_test("3")) { setflag(2); force_rport(); fix_contact(); }; if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; } else if (!check_to()) { sl_send_reply("403", "Username!=To not allowed"); break; }; if (!save("location")) { sl_reply_error(); }; } else { sl_send_reply("403", "This domain is not served here"); }; break; }; if (method=="INVITE") { if (!(is_from_local() || is_uri_host_local())) { sl_send_reply("403", "Relaying is forbidden"); break; }; t_on_failure("1"); } else if (method == "BYE" || method == "CANCEL") { end_media_session(); }; if (loose_route()) { if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; # end media session for BYE and CANCEL is done above # before entering the loose route. no need to call it here t_relay(); break; }; # Force subsequent messages to pass trough this proxy if (method == "INVITE") { record_route(); }; if (client_nat_test("3") && !search("^Record-Route:")) { # Mark as NAT'ed force_rport(); fix_contact(); }; if (method=="INVITE") { t_on_reply("1"); }; if (is_uri_host_local()) { if (!lookup("location")) { sl_send_reply("404", "User not found"); break; }; }; if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } failure_route[1] { end_media_session(); } onreply_route[1] { if (status=~"(183)|(2[0-9][0-9])") { if (client_nat_test("1")) { fix_contact(); }; use_media_proxy(); }; }

1 1

[Serusers] log question
by Mohammad Khan 02 Mar '05

02 Mar '05

how can I pass variable to log? I would like to do something like this: log(1, "src_ip: %s, dst_ip: %s", src_ip, dst_ip); Thanks, MOhammad

2 1

[Serusers] SER+SERWEB+MSILO
by harry gaillac 02 Mar '05

02 Mar '05

hi all, I set up ser + serweb + asterisk with 2 ip300 Polycom. ip300 Polycom support SUBSCRIBE/NOTIFY/MESSAGE methods. When i set one phone offline (phone is powered and registerd in location table) i can't store IM in msilo table. if i switch off phone IM is stored in msilo table but when I switch on the phone IM is not dumped to phone. Can I use presence instead of location in order to store IM ? Harry Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

1 0

[Serusers] Claims of ser-0.9 RFC3261 Violation
by Java Rockx 02 Mar '05

02 Mar '05

I just spoke with an enginee from a manufacturer of the WorldAccxx telephone adapter and he told me that my SIP proxy was in voliation of RFC3261. Below is a SIP registration against my ser-0.9 proxy. I'm using media proxy for NAT traversal and he says that my 200 OK is not valid and therefore their IAD disregards the 200 OK response. The problem he claims is with the <Contact:> header in the 200 OK. SER has rewritten the contact becase his IAD is NATed. Should I not be doing this? The actual problem is that when their IAD is NATed the device looses its registration with ser because (they claim) that the REGISTER message they send has a <Contact> header iwith a different IP than what ser sends back in the 200 OK message. They referenced section 10.2.4 and 19.1.4 in RFC3261. Can anyone confirm or reject their claims? Please help. Paul REGISTER sip:sip.mycompany.com:5060 SIP/2.0 Via: SIP/2.0/UDP 192.168.0.180;branch=z9hG4bKbb013e10d Max-Forwards: 70 Content-Length: 0 To: Accxx <sip:1000@sip.mycompany.com:5060> From: Accxx <sip:1000@sip.mycompany.com:5060>;tag=1eb7db0b344ac92 Call-ID: bd4da0ebfe98297597243a92b1b0f868(a)192.168.0.180 CSeq: 392547129 REGISTER Contact: Accxx <sip:1000@192.168.0.180;user=phone>;expires=200 Allow: NOTIFY Allow: REFER Allow: OPTIONS Allow: INVITE Allow: ACK Allow: CANCEL Allow: BYE User-Agent: WATA200 Callctrl/1.5.1.1 MxSF/v3.2.6.26 SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.0.180;branch=z9hG4bKbb013e10d;rport=36323;received=65.77.37.2 To: Accxx <sip:1000@sip.mycompany.com:5060> From: Accxx <sip:1000@sip.mycompany.com:5060>;tag=1eb7db0b344ac92 Call-ID: bd4da0ebfe98297597243a92b1b0f868(a)192.168.0.180 CSeq: 392547129 REGISTER Content-Length: 0 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.0.180;branch=z9hG4bKbb013e10d;rport=36323;received=65.77.37.2 To: Accxx <sip:1000@sip.mycompany.com:5060>;tag=bf952ed189d8425c881b09485aa0b6f1.bdad From: Accxx <sip:1000@sip.mycompany.com:5060>;tag=1eb7db0b344ac92 Call-ID: bd4da0ebfe98297597243a92b1b0f868(a)192.168.0.180 CSeq: 392547129 REGISTER WWW-Authenticate: Digest realm="sip.mycompany.com", nonce="42025161902f6f6af11f01f0a93ad2877e606bbc" Content-Length: 0 REGISTER sip:sip.mycompany.com:5060 SIP/2.0 Via: SIP/2.0/UDP 192.168.0.180;branch=z9hG4bK88fcb4e76 Max-Forwards: 70 Content-Length: 0 To: Accxx <sip:1000@sip.mycompany.com:5060> From: Accxx <sip:1000@sip.mycompany.com:5060>;tag=1eb7db0b344ac92 Call-ID: bd4da0ebfe98297597243a92b1b0f868(a)192.168.0.180 CSeq: 392547130 REGISTER Contact: Accxx <sip:1000@192.168.0.180;user=phone>;expires=200 Allow: NOTIFY Allow: REFER Allow: OPTIONS Allow: INVITE Allow: ACK Allow: CANCEL Allow: BYE Authorization:Digest response="18aabe984a6d89cc537cec9ce43b198d",username="1000",realm="sip.mycompany.com",nonce="42025161902f6f6af11f01f0a93ad2877e606bbc",uri="sip:sip.mycompany.com:5060" User-Agent: WATA200 Callctrl/1.5.1.1 MxSF/v3.2.6.26 SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.0.180;branch=z9hG4bK88fcb4e76;rport=36323;received=65.77.37.2 To: Accxx <sip:1000@sip.mycompany.com:5060> From: Accxx <sip:1000@sip.mycompany.com:5060>;tag=1eb7db0b344ac92 Call-ID: bd4da0ebfe98297597243a92b1b0f868(a)192.168.0.180 CSeq: 392547130 REGISTER Content-Length: 0 SIP/2.0 200 OK Via: SIP/2.0/UDP 192.168.0.180;branch=z9hG4bK88fcb4e76;rport=36323;received=65.77.37.2 To: Accxx <sip:1000@sip.mycompany.com:5060>;tag=bf952ed189d8425c881b09485aa0b6f1.5e63 From: Accxx <sip:1000@sip.mycompany.com:5060>;tag=1eb7db0b344ac92 Call-ID: bd4da0ebfe98297597243a92b1b0f868(a)192.168.0.180 CSeq: 392547130 REGISTER Contact: <sip:1000@65.77.37.2:36323;user=phone>;expires=200, <sip:1000@65.77.37.2:36235;user=phone>;expires=3 Content-Length: 0

3 3

[Serusers] rtpproxy must be located on the same machine with SIP server??
by szj 02 Mar '05

02 Mar '05

Hi, All: Please forgive me for such stupid questions, Whether it is a must that rtpprox must be located on the same machine with the SER. I want to enable the SER to support both the video and audio port modification when SIP UA　are behind the NAT. To do that what files should I modify(modules/nathelper/ nathelper.c???), but I don't know the protocol between the rtpproxy and SER. It is very kind of you to help me on that! Last day I used the SER on the iptel.org to test the nathelp module, my twu UA is located behind the NAT. one UA is registered on my SER server, the other on iptel.org'ser. After establishing connection, I checked the message log, I found the SER modified the SDP's c IP value to iptel.org's address(195.37.77.99). If I am right, the ser can know whether both UA are located within the same NAT clouds by examining the source IP of SIP message, why does it modified its SDP c value under such situations. Thanks for your kind help and advices! Best Regards. Sun Zongjun

2 1

[Serusers] problem (soft phoe is onfigured with SIP Express Router)
by anil pal 02 Mar '05

02 Mar '05

Hi sir, may i introduce myself ANIL KUMAR PAL currently i am working with softphone actually the problem is that my softphone is configured with ser and so many SIP server is available in the market like ASTREK SIP SERVER and MORA SIP SERVER so pls tell what is changes in my project so that my application is compatable with other SIP server like as i have written in my mail so pls let me know the soultion ia m waiting your positive respone . thnax a lot your's ANIL KUMAR PAL __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web http://birthday.yahoo.com/netrospective/

1 0

[Serusers] Outbound proxy definition
by support 02 Mar '05

02 Mar '05

Hi, I am really frustrated with the definition of outbound proxy: The outbound proxy is a normal SIP proxy. You configure your client, the phone or software, to use the proxy for all SIP sessions. I would like to know what is meant by all SIP sessions? Does it include all SIP message as well as voice packets (i.e. RTP packets)? Could I conclude that outbound proxy = ser + nathelper + rtpproxy/mediaproxy? Hope someone could answer my questions. Thanks. Thomas

3 2

[Serusers] Got Error in Nathelper "extract_mediaip: no `c=' in SDP"
by Markus Monka 02 Mar '05

02 Mar '05

While receiving "183 Session Progress" from PBX-Gateway i got this Error: ERROR: extract_mediaip: no `c=' in SDP: v=0^M o=root 2931 2931 IN IP4 192.168.0.4^M s=session^M c=IN IP4 192.168.0.4^M t=0 0^M m=audio 16768 RTP/AVP 8 0 3 10 97 18 2 5^M a=rtpmap:8 PCMA/8000^M a=rtpmap:0 PCMU/8000^M a=rtpmap:3 GSM/8000^M a=rtpmap:10 L16/8000^M a=rtpmap:97 iLBC/8000^M a=rtpmap:18 G729/8000^M a=rtpmap:2 G726-32/8000^M a=rtpmap:5 DVI4/8000^M a=silenceSupp:off - - - -^M ------------------------------------------------------------------------------------------------------------------------------- SipMessage: SIP/2.0 183 Session Progress. Via: SIP/2.0/UDP 192.168.0.185;branch=z9hG4bK3ead.91bc6532.0. From: "Markus Monka" <sip:9090@>;tag=0000000000000000. To: <sip:04321123456@>;tag=as2e40535e. Call-ID: 0000000000000000@ CSeq: 22375 INVITE. User-Agent: Asterisk PBX. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER. Contact: <sip:04321123456@>. Content-Type: application/sdp. Content-Length: 331. . v=0. o=root 2931 2931 IN IP4 192.168.0.4. s=session. c=IN IP4 192.168.0.4. t=0 0. m=audio 16768 RTP/AVP 8 0 3 10 97 18 2 5. a=rtpmap:8 PCMA/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:3 GSM/8000. a=rtpmap:10 L16/8000. a=rtpmap:97 iLBC/8000. a=rtpmap:18 G729/8000. a=rtpmap:2 G726-32/8000. a=rtpmap:5 DVI4/8000. a=silenceSupp:off - - - -. ------------------------------------------------------------------------------------------------------------------------------- Can someone explain me, why i got this error here? cp1 = NULL; for (cp = body->s; (len = body->s + body->len - cp) > 0;) { cp1 = ser_memmem(cp, "c=", len, 2); if (cp1 == NULL || cp1[-1] == '\n' || cp1[-1] == '\r') break; cp = cp1 + 2; } if (cp1 == NULL) { LOG(L_DBG, "ERROR: extract_mediaip: no `c=' in SDP\n"); return -1; } Seems to me, that the "c=" Part is inside? version: ser 0.8.14-4 (i386/linux) flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.168.4.3.2.1 2004/10/22 17:21:32 andrei Exp $ main.c compiled on 11:11:58 Feb 25 2005 with gcc 2.95 Thx Markus

1 0

[Serusers] username of from with avp_check
by Schweizer Laurent 02 Mar '05

02 Mar '05

Hello I want to know if it is possible to checks only the username of a from header with an avp value avp_check("$uncond_forwarding_dest","eq/$from/username/g") ) Laurent

2 1

[Serusers] serweb question
by johnny Laura 02 Mar '05

02 Mar '05

Hi to all; I have instaled and configured the SERWEB pakage; but when I open my web-browser,I can see the next warnings: Warning: virtual(): Unable to include '/prolog.html' - request execution failed in /var/www/html/serweb/html/page.php on line 48 ser.net User Management Warning: virtual(): Unable to include '/separator.html' - request execution failed in /var/www/html/serweb/html/page.php on line 50 But I followed the INSTALL instructions #echo "<body><h1>" > html/prolog.html #echo "</h1><hr>" > html/separator.html #echo "</body>" > html/epilog.html ....My next question ..well in the web page ....html/admin/index.php there are a login form too, with "user" and "password" options ; but I don't know what options I have to set in it; I have set : user=SER and password=HESLO; but appers "Bad username or password"

2 1

[Serusers] Problem with SER and RADIUS on the different machine
by Alex Jeon 02 Mar '05

02 Mar '05

Hi all, Is there anybody who make SER+RADIUS on the different machine? If I put both of them together on the same machine, it works fine. But if I seperate them, SER don't send any packet to RADIUS server and make an error log. Belows are details. ============Softwares running on FreeBSD 5.3-STABLE======== - ser-0.8.14 - radiusclient-0.4.7 - freeradius-1.0.1 ============= /usr/local/etc/ser/ser.cfg =================== loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclie nt.conf") modparam("auth_radius", "service_type", 15) if (method=="REGISTER") { if (!radius_www_authorize("")) { www_challenge("", "0"); break; }; save("location"); break; }; ============= /usr/local/etc/radiusclient/radiusclient.cfg ======== authserver 83.137.80.50 ============= /usr/local/etc/radiusclient/servers ============== 83.137.80.50 rad_test ====================Error log in dmesg============================ Mar 1 18:00:19 test ser: rc_send_server: no reply from RADIUS server unknown:1812 Mar 1 18:00:49 test ser: rc_ip_hostname: couldn't look up host by addr: 53895032 I am looking for all the mail archive for this problem but in vain. Only one answer for this problem is Dawid Mielnik's post.(http://lists.iptel.org/pipermail/serusers/2004-October/011991.html) Have a nice day. Thanks. Alex.

1 0

[Serusers] Need a rtpproxy between IPv6 and IPv4 users??
by szj 02 Mar '05

02 Mar '05

Hi: Although the IPv6 and IPv4 uesrs can establish connections through SER server, but the media stream is peer-based. Can an IPv6 stream go to an IPv4 reciever without the rtpproxy?? Thanks for your help! Best Regards Sun Zongjun

2 2

[Serusers] Reg. final year project
by prabhu srinivas 02 Mar '05

02 Mar '05

sir /madam , we are doing our final project in voip titled bridgeless voice conferencing using voip . we would like to know if ur ser has client and server to support conferencing . we are short of time . we would like to know if u could give a helping hand .

3 4

[Serusers] sequential forking support
by Juha Heinanen 02 Mar '05

02 Mar '05

i just committed some patches to lcr module that introduced two new functions: load_contacts() and next_contacts(). they can be used to implement sequential forking (see README for details). if all contacts in the destination set have the same qvalue, load_contacts() and next_contacts() don't do anything, just check that nothing needs to be done. -- juha

3 8

[Serusers] another cancel test
by Juha Heinanen 02 Mar '05

02 Mar '05

andres, i made another simpler cancel test. first sip:jh@test.fi invites sip:gs@test.fi, and gs starts ringing. then jh sends cancel to r-uri sip:gs@test.fi, which ser.cfg immediately at the start of the script t_relay()s out, i.e., without doing anything to the request. the result is that ser correctly sends a cancel to the ip address/port of gs. my conclusion of this is that cancels don't need to be processed by ser.cfg, just relayed out. perhaps others familiar with tm mystics can confirm or deny this. -- juha

4 8

[Serusers] FREEBSD ser cvs adn 0.90 ERROR
by ser＠fivewall.com 02 Mar '05

02 Mar '05

Hi! all FreeBSD 5.3,latest cvs and 0.90 have problem when /usr/local/sbin/serctl get ser# ps -ax PID TT STAT TIME COMMAND 0 ?? DLs 0:00.01 [swapper] 1 ?? SLs 0:00.07 /sbin/init -- 2 ?? DL 0:00.03 [g_event] 3 ?? DL 0:00.12 [g_up] 4 ?? DL 0:00.30 [g_down] 5 ?? DL 0:00.00 [thread taskq] 6 ?? DL 0:00.00 [kqueue taskq] 7 ?? IL 0:00.00 [acpi_task0] 8 ?? IL 0:00.00 [acpi_task1] 9 ?? IL 0:00.00 [acpi_task2] 10 ?? DL 0:00.00 [ktrace] 11 ?? RL 6:47.97 [idle] 12 ?? WL 0:00.00 [irq1: atkbd0] 13 ?? WL 0:00.00 [irq3: sio1] 14 ?? WL 0:00.00 [irq4: sio0] 15 ?? WL 0:00.00 [irq5:] 16 ?? WL 0:00.00 [irq6: fdc0] 17 ?? WL 0:00.00 [irq7: ppc0] 18 ?? WL 0:00.00 [irq8: rtc] 19 ?? WL 0:00.00 [irq9: acpi0] 20 ?? WL 0:00.00 [irq10:] 21 ?? WL 0:00.00 [irq11:] 22 ?? WL 0:00.00 [irq12: psm0] 23 ?? WL 0:00.00 [irq13:] 24 ?? WL 0:00.06 [irq14: ata0] 25 ?? WL 0:00.00 [irq15: ata1] 26 ?? WL 0:00.00 [irq16:] 27 ?? WL 0:00.00 [irq17: bt0] 28 ?? WL 0:00.04 [irq18: lnc0] 29 ?? WL 0:00.00 [irq19: uhci0] 30 ?? WL 0:00.00 [irq20:] 31 ?? WL 0:00.00 [irq21:] 32 ?? WL 0:00.00 [irq22:] 33 ?? WL 0:00.00 [irq23:] 34 ?? WL 0:00.00 [irq0: clk] 35 ?? WL 0:00.63 [swi5: clock sio] 36 ?? WL 0:00.00 [swi4: vm] 37 ?? WL 0:00.03 [swi1: net] 38 ?? DL 0:00.04 [yarrow] 39 ?? WL 0:00.00 [swi6:+] 40 ?? WL 0:00.00 [swi2: camnet] 41 ?? WL 0:00.00 [swi3: cambio] 42 ?? WL 0:00.00 [swi6: acpitaskq] 43 ?? WL 0:00.00 [swi6: task queue] 44 ?? WL 0:00.06 [swi6:+] 45 ?? DL 0:00.00 [usb0] 46 ?? DL 0:00.00 [usbtask] 47 ?? WL 0:00.00 [swi0: sio] 48 ?? DL 0:00.00 [fdc0] 49 ?? DL 0:00.00 [pagedaemon] 50 ?? DL 0:00.00 [vmdaemon] 51 ?? DL 0:00.59 [pagezero] 52 ?? DL 0:00.00 [bufdaemon] 53 ?? DL 0:00.03 [syncer] 54 ?? DL 0:00.00 [vnlru] 55 ?? DL 0:00.01 [hpt_wt] 56 ?? IL 0:00.00 [nfsiod 0] 57 ?? IL 0:00.00 [nfsiod 1] 58 ?? IL 0:00.00 [nfsiod 2] 59 ?? IL 0:00.00 [nfsiod 3] 60 ?? DL 0:00.07 [schedcpu] 179 ?? Is 0:00.00 adjkerntz -i 245 ?? Ss 0:00.03 /sbin/dhclient lnc0 272 ?? Is 0:00.00 /sbin/devd 292 ?? Ss 0:00.04 /usr/sbin/syslogd -s 367 ?? Ss 0:00.01 /usr/sbin/usbd 403 ?? Ss 0:00.03 /usr/sbin/sshd 409 ?? Ss 0:00.04 sendmail: accepting connections (sendmail) 413 ?? Is 0:00.01 sendmail: Queue runner@00:30:00 for /var/spool/client 425 ?? Ss 0:00.02 /usr/sbin/cron -s 439 ?? Ss 0:00.18 /usr/local/sbin/httpd 471 ?? I 0:00.07 /usr/local/sbin/ser -P /var/run/ser.pid 472 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 473 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 474 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 475 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 476 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 477 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 478 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 479 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 480 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 481 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 482 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 483 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 484 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 485 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 486 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 487 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 488 ?? I 0:00.00 /usr/local/sbin/ser -P /var/run/ser.pid 489 ?? S 0:00.08 /usr/local/sbin/ser -P /var/run/ser.pid 490 ?? S 0:00.04 /usr/local/sbin/ser -P /var/run/ser.pid 491 ?? S 0:00.03 /usr/local/sbin/ser -P /var/run/ser.pid 492 ?? S 0:00.03 /usr/local/sbin/ser -P /var/run/ser.pid 493 ?? S 0:00.03 /usr/local/sbin/ser -P /var/run/ser.pid 494 ?? S 0:00.03 /usr/local/sbin/ser -P /var/run/ser.pid 495 ?? S 0:00.04 /usr/local/sbin/ser -P /var/run/ser.pid 496 ?? S 0:00.02 /usr/local/sbin/ser -P /var/run/ser.pid 497 ?? S 0:00.03 /usr/local/sbin/ser -P /var/run/ser.pid 498 ?? S 0:00.02 /usr/local/sbin/ser -P /var/run/ser.pid 499 ?? I 0:00.00 /usr/local/sbin/httpd 500 ?? I 0:00.00 /usr/local/sbin/httpd 501 ?? I 0:00.00 /usr/local/sbin/httpd 502 ?? I 0:00.00 /usr/local/sbin/httpd 503 ?? I 0:00.00 /usr/local/sbin/httpd 524 ?? Is 0:00.01 /usr/sbin/inetd -wW -C 60 583 ?? Ss 0:00.08 sshd: lynx [priv] (sshd) 586 ?? S 0:00.09 sshd: lynx@ttyp0 (sshd) 587 p0 Ss 0:00.04 -sh (sh) 588 p0 S 0:00.05 su 589 p0 S 0:00.08 _su (csh) 595 p0 R+ 0:00.03 ps -ax 536 v0 Is+ 0:00.01 /usr/libexec/getty Pc ttyv0 537 v1 Is+ 0:00.01 /usr/libexec/getty Pc ttyv1 538 v2 Is+ 0:00.01 /usr/libexec/getty Pc ttyv2 539 v3 Is+ 0:00.01 /usr/libexec/getty Pc ttyv3 540 v4 Is+ 0:00.01 /usr/libexec/getty Pc ttyv4 541 v5 Is+ 0:00.01 /usr/libexec/getty Pc ttyv5 542 v6 Is+ 0:00.01 /usr/libexec/getty Pc ttyv6 543 v7 Is+ 0:00.01 /usr/libexec/getty Pc ttyv7 443 con- I 0:00.04 /bin/sh /usr/local/bin/mysqld_safe --user=mysql --dat 468 con- S 0:01.00 /usr/local/libexec/mysqld --basedir=/usr/local --data ser# serctl moni [: unexpected operator [: -ne: unexpected operator ser# ---- ZhongShan Ether Network Security Inc ---------------------------------------------------------

1 0

[Serusers] dbt_table_check_row: NULL value not allowed - field 7
by ser＠fivewall.com 02 Mar '05

02 Mar '05

hi,all list i config dbtext in freebsd 4.10,ser0.8.14,and get debug DBT:dbt_table_check_row: NULL value not allowed - field 7 *********************** 1(237) check_self - checking if port 5060 matches port 5060 1(237) check_nonce(): comparing [422583e1166b52f1b65007f2701c1f4845ff845f] and [422583e1166b52f1b65007f2701c1f4845ff845f] 1(237) DBT:db_query: new res with 1 cols 1(237) DBT:dbt_result_new: new res with 1 cols 1(237) HA1 string calculated: d1500a282a8f414cf66ebfb72c1dc749 1(237) check_response(): Our result = '33871c1cced77ca171eeb83b402d72d8' 1(237) check_response(): Authorization is OK 1(237) save_rpid(): rpid value is '' 1(237) parse_headers: flags=-1 1(237) parse_headers: flags=33554432 1(237) DBT:dbt_table_check_row: NULL value not allowed - field 7 1(237) DBT:db_insert: cannot insert the new row!! 1(237) DBT:db_insert: make clean! 1(237) db_insert_ucontact(): Error while inserting contact 1(237) insert_ucontact(): Error while inserting in database 1(237) insert(): Error while inserting contact 1(237) contacts(): Error while inserting record 1(237) parse_headers: flags=-1 1(237) check_via_address(192.168.1.100, 192.168.1.100, 0) 1(237) DEBUG:destroy_avp_list: destroing list 0x0 1(237) receive_msg: cleaning up *********************** ser.cf config *********************** # Uncomment this if you want to use dbtext database loadmodule "/usr/local/lib/ser/modules/dbtext.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # dbtext.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use dbtext database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 1) modparam("usrloc", "db_url", "/usr/home/ser/db") modparam("auth_db", "db_url", "/usr/home/ser/db") #modparam("usrloc", "db_url", "dbtext://usr/home/ser/db") #modparam("auth_db", "db_url", "dbtext://usr/home/ser/db") # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", 1) # # If you set "calculate_ha1" parameter to 1 (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") modparam("auth_db", "user_column", "username") modparam("auth_db", "domain_column", "domain") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) if (!www_authorize("ser.fivewall.com", "subscriber")) { www_challenge("ser.fivewall.com", "0"); break; }; save("location"); break; }; *********************** aliases (is all one line) *********************** username(str) domn(str,null) contact(str,null) expires(int,null) q(double,null) callid(str,null) cseq(int,null) last_modified(str) replicate(int,null) state(int,null) flags(int) user_agent(str) received(str) *********************** domain (is all one line) *********************** domain(str,null) ast_modified(str) ser.fivewall.com:2005-03-01 09:58:33 *********************** location (is all one line) *********************** username(str) domain(str,null) contact(str,null) expires(int,null) q(double,null) callid(str,null) cseq(int,null) last_modified(str) replicate(int,null) state(int,null) flags(int) user_agent(str) received(str) *********************** subscriber (is all one line) *********************** username(str) password(str) ha1(str) domain(str) ha1b(str) 1001:1001:xxx:ser.fivewall.com:xxx ---- ZhongShan Ether Network Security Inc ---------------------------------------------------------

1 0

Re: [Serusers] help needed
by Java Rockx 02 Mar '05

02 Mar '05

Tina, It's hard to say without seeing some source code. Regards, Paul On Tue, 1 Mar 2005 19:24:07 -0800 (PST), Tina <kramarv(a)yahoo.com> wrote: > > I declared the function as an exported command. When the module is loaded, > other functions can obtain the pointer to the function (by calling > find_export) and call it. However, I can't call the function from ser.cfg. > Have I messed some step? > > Thanks in advance, > Tina > > Java Rockx <javarockx(a)gmail.com> wrote: > Have you exported the mailbox function(s) your are calling from ser.cfg? > > Regards, > Paul > > > On Tue, 1 Mar 2005 16:46:32 -0800 (PST), Tina wrote: > > > > Hello, > > I added custom module (mailbox.so) to SER to add some DB queries (just > like > > in DB example). The module exports the function mbx_lookupmailbox. The > > function is available for other modules; unfortunately I obtain the > > following when trying to call it from ser.cfg: > > > > %ser -c > > %0(20596) parse error (137,24-25): unknown command, missing loadmodule? > > > > (Though the module is loaded, the function is registered and found by > other > > functions). Have I missed something? > > Thanks in advance, > > Tina Kramarenko > > > > Here is my configuration file: > > ============================================================= > > > > # ----------- global configuration parameters ------------------------ > > #debug=3 # debug level (cmd line: -dddddddddd) > > #fork=yes > > #log_stderror=no # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > > debug=7 > > fork=no > > log_stderror=yes > > */ > > check_via=no # (cmd. line: -v) > > dns=no # (cmd. line: -r) > > rev_dns=no # (cmd. line: -R) > > #port=5060 > > #children=4 > > fifo="/tmp/ser_fifo" > > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > > loadmodule "/usr/local/lib/ser/modules/mysql.so" > > loadmodule "/usr/local/lib/ser/modules/mailbox.so" > > loadmodule "/usr/local/lib/ser/modules/sl.so" > > loadmodule "/usr/local/lib/ser/modules/tm.so" > > loadmodule "/usr/local/lib/ser/modules/rr.so" > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > > loadmodule "/usr/local/lib/ser/modules/registrar.so" > > # Uncomment this if you want digest authentication > > #mysql.so must be loaded ! > > loadmodule "/usr/local/lib/ser/modules/auth.so" > > loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > > #modparam("usrloc", "db_mode", 0) > > # Uncomment this if you want to use SQL database > > # for persistent storage and comment the previous line > > modparam("usrloc", "db_mode", 2) > > # -- auth params -- > > # Uncomment if you are using auth module > > # > > modparam("auth_db", "calculate_ha1", yes) > > # > > # If you set "calculate_ha1" parameter to yes (which true in this config), > > # uncomment also the following parameter) > > # > > modparam("auth_db", "password_column", "password") > > # -- rr params -- > > # add value to ;lr param to make some broken UAs happy > > modparam("rr", "enable_full_lr", 1) > > modparam("tm", "fr_inv_timer", 15 ) > > modparam("tm", "fr_timer", 10 ) > > > > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > # initial sanity checks -- messages with > > # max_forwards==0, or excessively long requests > > if (!mf_process_maxfwd_header("10")) { > > sl_send_reply("483","Too Many Hops"); > > break; > > }; > > if ( msg:len > max_len ) { > > sl_send_reply("513", "Message too big"); > > break; > > }; > > # we record-route all messages -- to make sure that > > # subsequent messages will go through our proxy; that's > > # particularly good if upstream and downstream entities > > # use different transport protocol > > record_route(); > > # loose-route processing > > if (loose_route()) { > > t_relay(); > > break; > > }; > > # if the request is for other domain use UsrLoc > > # (in case, it does not work, use the following command > > # with proper names and addresses in it) > > if (uri==myself) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > > # > > if (!www_authorize("localhost", "subscriber")) { > > www_challenge("localhost", "0"); > > break; > > }; > > save("location"); > > break; > > }; > > # native SIP destinations are handled using our USRLOC DB > > if (!lookup("location")) { > > sl_send_reply("404", "Not Found"); > > break; > > }; > > > > # if we do not get a positive reply, continue at reply_route[1] > > # forward the request to all destinations in destination set now > > t_on_failure("1"); > > t_relay(); > > }; > > } > > > > failure_route[1]{ > > log(1, "failure_route[1]\n"); > > if (t_check_status("408|486|487")){ > > log(1, "t_check_status(408|486|487)\n"); > > > > mbx_lookupmailbox(); > > #here will be some processing > > t_relay(); > > break; > > } > > } > > > > > > ________________________________ > > Do you Yahoo!? > > Yahoo! Mail - Find what you need with new enhanced search. Learn more. > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > ________________________________ > Do you Yahoo!? > Yahoo! Sports - Sign up for Fantasy Baseball. > >

1 0

[Serusers] help needed
by Tina 02 Mar '05

02 Mar '05

Hello, I added custom module (mailbox.so) to SER to add some DB queries (just like in DB example). The module exports the function mbx_lookupmailbox. The function is available for other modules; unfortunately I obtain the following when trying to call it from ser.cfg: %ser -c %0(20596) parse error (137,24-25): unknown command, missing loadmodule? (Though the module is loaded, the function is registered and found by other functions). Have I missed something? Thanks in advance, Tina Kramarenko Here is my configuration file: ============================================================= # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/mailbox.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication #mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 15 ) modparam("tm", "fr_timer", 10 ) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("localhost", "subscriber")) { www_challenge("localhost", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; # if we do not get a positive reply, continue at reply_route[1] # forward the request to all destinations in destination set now t_on_failure("1"); t_relay(); }; } failure_route[1]{ log(1, "failure_route[1]\n"); if (t_check_status("408|486|487")){ log(1, "t_check_status(408|486|487)\n"); mbx_lookupmailbox(); #here will be some processing t_relay(); break; } } --------------------------------- Do you Yahoo!? Yahoo! Mail - Find what you need with new enhanced search. Learn more.

3 2

[Serusers] click2dial from thunderbird
by Iqbal 02 Mar '05

02 Mar '05

Hi Came across this , its for vonage only http://extensions.otabi.com/ is anyone working on, or expanded the click2dial for ser and built it for thunderbird Iqbal

1 0

[Serusers] Radius Accounting doesn't work with SER 0.9.0
by Rafael J. Risco G.V. 01 Mar '05

01 Mar '05

hello I´ve just upgraded SER from version 0.8.99-dev1 to 0.9.0 and my radius accounting system doesn't work properly, it only generates the start log but I can´t see any "Stop record" in radius logs when call its finished... see my configuration file below (same that I used with 0.8.99-dev1). thanks RaFael File: /usr/local/etc/ser/Ser_VM_RadAcc_NatHelp-Test1.cfg # This default script includes nathelper support. To make it work # you will also have to install Maxim's RTP proxy. The proxy is enforced # if one of the parties is behind a NAT. # # If you have an endpoing in the public internet which is known to # support symmetric RTP (Cisco PSTN gateway or voicemail, for example), # then you don't have to force RTP proxy. If you don't want to enforce # RTP proxy for some destinations than simply use t_relay() instead of # route(1) # # Sections marked with !! Nathelper contain modifications for nathelper # # Also Include Mysql support for digest authentication, Pstn forward, # voicemail and Radius Accounting module. # ----------- global configuration parameters ------------------------ #/* Uncomment these lines to enter debugging mode debug=9 fork=yes log_stderror=yes #*/ listen=**** port=5060 # hostname matching an alias will satisfy the condition uri==myself". alias=domain.com check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) children=4 fifo="/tmp/ser_fifo" # sip_warning - Should replies include extensive warnings? # By default yes, it is good for trouble-shooting. sip_warning=yes # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/group.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # digest authentication loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # !! Nathelper loadmodule "/usr/local/lib/ser/modules/nathelper.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc", "db_mode", 2) # storing passwords in our database in plain text: # modparam("auth_db", "calculate_ha1", yes) # modparam("auth_db", "password_column", "password") # For Rad Accounting modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3) modparam("acc", "report_ack", 0) # 1 reporta dos starts en acc modparam("tm", "fr_timer", 20 ) modparam("tm", "fr_inv_timer", 30 ) modparam("tm", "wt_timer", 20 ) # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("group", "db_url", "mysql://ser:heslo@localhost/ser") # mysql in cvs head vs # modparam("uri", "db_url", "sql://ser:heslo@localhost/ser") # in ser0814 modparam("uri_db", "db_url", "mysql://ser:heslo@localhost/ser") # in cvs head version # ------------- registration parameters modparam("registrar", "nat_flag", 6) modparam("registrar", "min_expires", 60) modparam("registrar", "max_expires", 86400) modparam("registrar", "default_expires", 3600) modparam("registrar", "desc_time_order", 1) modparam("registrar", "append_branches", 1) # !! Nathelper # modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT # -------------------------- request routing logic -------------------------- route { log(1, "-------------------------------------------\n"); log(1, "entering main loop\n"); # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # !! Nathelper # Special handling for NATed clients; first, NAT test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding is used); also, # the received test should, if completed, should check all # vias for rpesence of received if (nat_uac_test("19")) { # Allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart enough to be symmetric. In some phones it takes a configuration # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is # called "symmetric media" and "symmetric signalling". fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); # t_relay(); route(1); # Nathelper!! break; }; # Set flag for Radius Accounting: if (method=="INVITE") { log(1, "INVITE MESSAGE RECEIVED - START ACC\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE") { log (1, "BYE - STOP ACCOUNTING\n"); setflag(1); }; if (method=="CANCEL") { log (1, "CANCEL - STOP ACCOUNTING\n"); setflag(1); }; setflag(3); # Set Radius Missed Flag if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # t_relay(); route(1); break; }; if (uri==myself) { if (method == "REGISTER") { log(1, "ANALYZING REGISTER REQUEST\n"); # to use digest authentication if (!www_authorize("domain.com", "subscriber")) { www_challenge("domain.com", "0"); break; }; if (!save("location")) { sl_reply_error(); }; break; }; /* ***************** Dial out to PSTN logic ****************** */ ### Pendiente agregar seguridad a esta etapa, usar Digest-Auth o "credentials" # forward n digit requests to gateway AS5350 (Celulares Lima) if(uri=~"^sip:9"){ log(1,"n digit expression match - Celulares"); rewritehostport("X.X.X.X:5060"); route(2); break; }; # forward international calls to Asterisk (a FWD, H323gws) if(uri=~"^sip:00"){ rewritehostport("Y.Y.Y.Y:5060"); log(1,"n digit expression match - LDI"); route(2); break; }; /* ******************************************************************** */ lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); # t_relay(); route(1); break; }; # does the user wish redirection on no availability? (i.e., is he # in the voicemail group?) -- determine it now and store it in # flag 4, before we rewrite the flag using UsrLoc if (is_user_in("Request-URI", "voicemail")) { log(1, "requested user is in voicemail group"); setflag(4); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { log(1,"unable to locate user"); # handle user which was not found route(4); break; }; }; # End of "if(uri==myself)" append_hf("P-hint: usrloc applied\r\n"); route(1); # if user is on-line and is in Voicemail group, enable redirection if (method == "INVITE" && isflagset(4)) { log(1, "invite for voicemail user->initiate failureroute[1]\n"); t_on_failure("1"); }; # t_relay(); } route[1] { # !! Nathelper if (uri=~"[@:](192\.168\.)" && !search("^Route:")){ sl_send_reply("479", "We don't forward to private IP addresses"); break; }; # if client or server know to be behind a NAT, enable relay if (isflagset(6)) { force_rtp_proxy(); }; # NAT processing of replies; apply to all transactions (for example, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; break; } # !! Nathelper onreply_route[1] { # NATed transaction ? if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); # otherwise, is it a transaction behind a NAT and we did not # know at time of request processing ? (RFC1918 contacts) } else if (nat_uac_test("1")) { fix_nated_contact(); }; } # ----------------- SIP-to-PSTN call routed ------------------- route[2]{ log(1,"route[2]:SIP-to-GW call routed"); if(!t_relay()){ sl_reply_error(); }; } # --------------- Handling of Unavailable user ---------------- route[4] { # non-Voip -- just send "off-line" if (!(method=="INVITE" || method=="ACK" || method=="CANCEL" || method=="BYE")) { sl_send_reply("404", "Not Found"); acc_rad_request("404 Not Found"); break; }; # not voicemail subscriber if (!isflagset(4)) { sl_send_reply("404", "Not Found and no voicemail turned on"); acc_rad_request("404 Not Found"); break; }; # forward to voicemail adding prefix to simplify * "extension.conf" prefix("vm"); rewritehostport("Y.Y.Y.Y:5060"); t_relay_to_udp("Y.Y.Y.Y", "5060"); } # if forwarding downstream did not succeed, try voicemail running at Asterisk failure_route[1]{ if (t_check_status("485")){ revert_uri (); prefix("vm"); rewritehostport ("Y.Y.Y.Y:5060"); append_branch(); t_relay(); break; } } -- rrgv

1 1

[Serusers] PHP5 - aggregate_methods() missing, serweb failing
by Dag Bakke 01 Mar '05

01 Mar '05

It appears that aggregate_methods() is missing in PHP5. Thus, I get: Fatal error: Call to undefined function aggregate_methods() in /opt/serweb/html/data_layer.php on line 87 when trying to access the user or admin interface of serweb. This is with serweb cvs as of yesterday and php 5.0.3. I have no idea if there are more issues related to php5 and serweb. But is there a plan/chedule for making serweb working with php5? Or should I just downgrade to php4? Other projects have hit this problem as well: https://sourceforge.net/tracker/?group_id=92482&atid=600780&func=detail&aid… Thank you to everyone contributing to ser and serweb! Dag B.

4 5

[Serusers] Help - ser won't start while installing
by Dana Olson 01 Mar '05

01 Mar '05

I downloaded the 0.8.14 Debian packages and tried installing them. I know that they work, since they worked fine on my other system, but this one (which is almost identical, save for the NIC) doesn't work. Here is what happens in the console: # dpkg -i ser_0.8.14_i386.deb Selecting previously deselected package ser. (Reading database ... 10117 files and directories currently installed.) Unpacking ser (from ser_0.8.14_i386.deb) ... Setting up ser (0.8.14) ... Restarting ser: ser It just hangs there forever. I checked the end of /var/log/messages but there are no messages from ser there. I would try reinstalling Debian from scratch, but the server itself is in another country, and I'm trying to install SER remotely over SSH. I've tried rebooting which didn't help (although I didn't expect it would). I searched on Google and the closest thing I could find was invalid syntax in the ser.cfg script, but this is the initial package install... Please, please help me out. -- Dana

1 3

[Serusers] mysql and SER
by johnny Laura 01 Mar '05

01 Mar '05

Hi ...One question; if I compile SER with all option (#make all) the SER software have mysql support??

3 2

[Serusers] serweb
by johnny Laura 01 Mar '05

01 Mar '05

Hi to all; well I'm instaling ser and I'dont find the serweb pakage; it's my first time; I want to use the SER in a LAN; can anyone tell me where search the SER-WEB pakage???

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users