- sr-users - kamailio.org

[Serusers] serweb not make call
by Bin Zhang 05 Mar '05

05 Mar '05

Hi: everyone, Our team use ser_0.9.0 and serweb, the ser works well, but we find the serweb can not make call to anyone online actually.....That means the serweb is not a client-side of IP phone.... It is just an account managment tool, isn't it? Can anyone know it?? thanks bin zhang -- hubblezhang

2 1

[Serusers] ERROR: fix_expr : bad re "sip:voicemail+*@*"
by ser＠fivewall.com 05 Mar '05

05 Mar '05

hi, i cvs co latest sip_router and rel_0_9_0,use the default ser.cfg is work!,and when i run with sems in Single instance ser,i get : ERROR: fix_expr : bad re "sip:voicemail+*@*" Regards, Rana sems.conf ser_fifo_name=/tmp/ser_fifo socket_name=/tmp/am_sock send_method=fifo # ----------- configuration parameters from Stefan ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 # Configure Ser to create a FIFO server fifo="/tmp/ser_sock" # Configure FIFO DB fifo_db_url="mysql://ser:heslo@localhost/ser" # # for dbtext: # create a file usr_preferences in /path/to/dbtext/dir # with the following contents: # username(str,null) domain(str,null) attribute(str,null) value(str,null) type(int,null) # alice:mydomain.com:email:alice at mymail.com:2 # bert:mydomain.com:email:bert at mymail.com:2 #etc. and uncomment the following line #fifo_db_url="dbtext:///path/to/dbtext/dir" # ------------------ module loading ---------------------------------- # either dbtext or mysql # loadmodule "modules/dbtext/dbtext.so" # # if installed via make install, modules are in /usr/local/lib/ser/modules/ # (e.g. loadmodule "/usr/local/lib/ser/modules/mysql.so") loadmodule "modules/mysql/mysql.so" loadmodule "modules/sl/sl.so" loadmodule "modules/tm/tm.so" loadmodule "modules/rr/rr.so" loadmodule "modules/maxfwd/maxfwd.so" loadmodule "modules/usrloc/usrloc.so" loadmodule "modules/registrar/registrar.so" # if you do not use fifo_db for the email address, but # e.g. load_avp("ruri","email",0); # load avp_db.so with # loadmodule "modules/avp_db/avp_db.so # # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; if (uri==myself) { if (method=="REGISTER") { # make UAs which want to register happy sl_send_reply("200","OK"); break; }; # switch to statefull mode: if (!t_newtran()){ sl_send_reply("500","could not create transaction"); break; }; if (method=="ACK"){ # absorb ACKs break; }; # prevent timeout on the other side: t_reply("100","Trying - just wait a minute !"); # uncomment this for single ser instance configuration # dont forget to add user_prefix_separator=+ to sems.conf # forward to sems plugin directly if r_uri is plugin_name+... at ... if (uri=~"sip:voicemail+*@*") { if(!t_write_unix("/tmp/am_sock","voicemail")){ log("could not contact voicemail\n"); t_reply("500","could not contact voicemail"); }; break; }; if (uri=~"sip:conference+*@*") { if(!t_write_unix("/tmp/am_sock","conference")){ log("could not contact conference\n"); t_reply("500","could not contact conference"); }; break; }; if (uri=~"sip:announcement+*@*") { if(!t_write_unix("/tmp/am_sock","announcement")){ log("could not contact announcementce\n"); t_reply("500","could not contact announcement"); }; break; }; if (method=="INVITE"){ # redirect the call to the 'conference' plug-in # if the URI begin with 100 if (uri=~"sip:100.*@") { # assumes that Sems configuration parameter 'socket_name=' # has been set to /tmp/am_sock if(!t_write_unix("/tmp/am_sock","conference")) { t_reply("500","error contacting sems"); }; break; }; # redirect the call to the 'announcement' plug-in # if the URI begin with 200 if (uri=~"sip:200.*@") { if(!t_write_unix("/tmp/am_sock","announcement")) { t_reply("500","error contacting sems"); }; break; }; # no service number, redirect to voicemail. # do not forget to load AVPs so that voicemail gets the # callee's email address. #load_avp("ruri","email",0); if(!t_write_unix("/tmp/am_sock","voicemail")) { t_reply("500","error contacting sems"); }; break; } else if (method=="BYE" || method=="CANCEL") { # Sems should already know which plug-in is handling that # call. "bye" is no plug-in name. It is a reserved name which # tells Sems to terminate the call. if(!t_write_unix("/tmp/am_sock","bye")) { t_reply("500","error contacting sems"); }; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } ---- ZhongShan Ether Network Security Inc ---------------------------------------------------------

2 1

[Serusers] need help
by harry gaillac 05 Mar '05

05 Mar '05

hi all, I set up ser + serweb + asterisk with 2 ip300 Polycom. ip300 Polycom supporting SUBSCRIBE/NOTIFY/MESSAGE methods. When i set one phone offline (phone is powered and registered in location table) i can't store IM in msilo table.IM is sent to phone if i switch off phone IM is stored in msilo table but when I switch on the phone IM is not dumped to phone. Can I use presence instead of location in order to store IM ? Harry Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

1 0

[Serusers] ser 0.9.0 and serweb from cvs
by Rosario Pingaro 05 Mar '05

05 Mar '05

We are starting to work on ser 0.9.0 and the latest cvs serweb. Two problems: 1. don't seems possible to activate the voicemail for the customers; 2. on some tabs i get DB error. Any help? Thanks

1 0

[Serusers] VoIP SIP
by vivek r 05 Mar '05

05 Mar '05

Hello Sir/Madam, We,the students of final year Btech(IT) from India,are doing the same project in Sip VoIP.And also we are getting the same error as: gov.nist.javax.sip.SipStackImpl cannot be instantiated.Ensure the path name has been set. javax.sip.PeerUnavailableException. If you get any answer regarding this error,kindly provide us with the details immediately.We need it urgently. Bye, R.vivek & batch "work work and work that will not let u down any day,any way." "dont be happy that u re handsom.be happy that u r confident and hardworking. --------------------------------- Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web

1 0

[Serusers] kernel version
by support 05 Mar '05

05 Mar '05

Hi, I would like to know what version of linux kernel will give a stable running with SER and rtpproxy? Is it a big issue in providing a stable SER? As I find that after I have updated the kernel to 2.6.10 from 2.6.5, ser seems to be more stable than before. Thomas

1 0

[Serusers] New user
by Roman Pahuacho Bonilla 04 Mar '05

04 Mar '05

Hi. I installed SIP Server and I want test the server,.... someone can send me some tips .... thanks Roman

1 0

[Serusers] Request for SER INSTALL QUOTE
by olivier olivier 04 Mar '05

04 Mar '05

3 2

[Serusers] RTP Wiretapping
by Java Rockx 04 Mar '05

04 Mar '05

Hi All. I'm located in the US and would like to comply with the Communications Assistance for Law Enforcement Act (CALEA) that Congress passed which basically says that VoIP providers should have the ability to wiretap conversations for the FBI upon request. I use mediaproxy for NAT traversal. So my question is how can I be CALEA compliant? I assume I should be able to modify mediaproxy to write RTP streams to disk, but I'm unclear on how to "mix" both sides of the conversation. Can anyone help with a suggestion? Regards, Paul

6 12

[Serusers] Re: [Serdev] ser 0.9.0, CANCEL/t_on_failure broken
by Java Rockx 04 Mar '05

04 Mar '05

Andres, Did you have to patch Asterisk to fix this? If so, would you share your patch? Regards, Paul On Fri, 04 Mar 2005 12:12:18 -0500, Andres <andres(a)telesip.net> wrote: > > > Bogdan-Andrei IANCU wrote: > > > Andres, > > > > The problem is not in ser, but in Asterisk... As your net captures > > shows, * does not generate any INVITE final reply when receiving > > CANCEL. It should sent a "487 Request Terminated". > > The lack of this final reply keeps the transaction open on ser; when > > FR timer hits, internally "408 Timeout" is generated (after 120 secs) > > and failure_route called. > > > > So the problem is *. > > > > bogdan > > Crystal clear Bogdan. Problem solved now in Asterisk. Now we can start > testing 0.9.0. > > Thanks! > > > > > > > -- > Andres > Network Admin > http://www.telesip.net > > > _______________________________________________ > Serdev mailing list > serdev(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serdev >

2 1

RE: [Serusers] lcr module and column type in DB
by Matt Schulte 04 Mar '05

04 Mar '05

Ok, again this is the original number I came up with. Comes back with: 84.33.59.8:138092893 -----Original Message----- From: Java Rockx [mailto:javarockx@gmail.com] Sent: Friday, March 04, 2005 1:13 PM To: Iqbal Cc: Matt Schulte; jh(a)lohi.tutpro.com; serusers(a)lists.iptel.org Subject: Re: [Serusers] lcr module and column type in DB The correct answer is 85063633 You can find a tool on line for this at http://www.dnsstuff.com/ Regards, Paul On Fri, 04 Mar 2005 19:09:41 +0000, Iqbal <iqbal(a)gigo.co.uk> wrote: > > one of us i doing the maths wrong I get > > 85063637 > > Iqbal > > On 3/4/2005, "Matt Schulte" <mschulte(a)netlogic.net> wrote: > > >Well, I did that and this is what I got :-) > > > >84.33.59.8:138092893 > >I tried "forwards" (without reverse) and got another funky IP. > > > >-lost > > > >-----Original Message----- > >From: Iqbal [mailto:iqbal@gigo.co.uk] > >Sent: Friday, March 04, 2005 12:28 PM > >To: Matt Schulte; jh(a)lohi.tutpro.com > >Cc: serusers(a)lists.iptel.org > >Subject: RE: [Serusers] lcr module and column type in DB > > > > > > > >yeah pretty much, > > > >Iqbal > > > >On 3/4/2005, "Matt Schulte" <mschulte(a)netlogic.net> wrote: > > > >>So, just to clear this up. You still have to reverse the ip, so: > >> > >>example: > >>209.247.17.5 > >>reverses to: > >>5.17.247.209 > >> > >>which long format comes to: > >>85063633 > >> > >> Thanks .. ?? > >> > >>-----Original Message----- > >>From: Iqbal [mailto:iqbal@gigo.co.uk] > >>Sent: Wednesday, March 02, 2005 2:55 PM > >>To: jh(a)lohi.tutpro.com > >>Cc: serusers(a)lists.iptel.org > >>Subject: Re: [Serusers] lcr module and column type in DB > >> > >> > >> > >>cheers, just what I needed..one thing though I had to reverse the > >>format...not sure if I was doing it wrong or something else. > >> > >>Anyhow for all those with the same problem manually calculating it > >>is > >> > >>IP=A.B.C.D > >> > >>IPlong= A*16777216 + B*65536 + C*256 + D > >> > >>but as mentioned above I for some reason had to do > >> > >>D*16777216 + C*65536 + B*256 + A > >> > >>Iqbal > >> > >> > >> > >>On 3/2/2005, "Juha Heinanen" <jh(a)lohi.tutpro.com> wrote: > >> > >>>Iqbal writes: > >>> > >>> > Any ideas > >>> > >>>yes, you have to put in ip_addr field integer representation of ip > >>>address. use, for example, php's ip2long function. > >>> > >>>-- juha > >>> > >>> > >> > >>_______________________________________________ > >>Serusers mailing list > >>serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers > >> > >> > > > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers >

1 0

RE: [Serusers] Re: lcr and ser 0.9.0
by Juha Heinanen 04 Mar '05

04 Mar '05

Raymond Chen writes: > After removing the _F from HDR, still a error during compilation > > gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall > lcr_mod.c: In function `load_contacts': ... > lcr_mod.c:830: error: too many arguments to function `next_branch' > lcr_mod.c:852: error: too many arguments to function `next_branch' > make[1]: *** [lcr_mod.o] Error 1 ok, since i last time compiled lcr module for 0.9.0 it seems that iptel folks have added a new argument to next_branch function. just remove the last zero argument from the two function calls. i'll make available a 0.9.0 version of lcr module on my web site shortly. -- juha

4 7

[Serusers] Re: Serusers Digest, Vol 23, Issue 7
by Olivier.taylor 04 Mar '05

04 Mar '05

Hi, I installed SER 8.14 exactly following INSTALL guide. I am running on the same machine MySQL 4.1.10 and I successfuly initialised ser database. Serweb is working fine with mysql, any changes in the mysql database is visible on serweb. In /var/log/messages I can see : Mar 4 15:38:05 linux ser: Listening on Mar 4 15:38:05 linux ser: 127.0.0.1 [127.0.0.1]:5060 Mar 4 15:38:05 linux ser: 82.146.123.252 [82.146.123.252]:5060 Mar 4 15:38:05 linux ser: Aliases: linux.finalcut.be:5060 finalcut.be:5060 localhost:5060 localhost.localdomain:5060 Mar 4 15:38:05 linux ser: ser startup succeeded Mar 4 15:38:05 linux /usr/sbin/ser[2652]: connect_db(): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) Mar 4 15:38:05 linux /usr/sbin/ser[2652]: db_init(): Error while trying to connect database Mar 4 15:38:05 linux /usr/sbin/ser[2652]: mod_init(): Error while connecting database Mar 4 15:38:05 linux /usr/sbin/ser[2652]: init_mod(): Error while initializing module usrloc Mar 4 15:38:05 linux crond: crond startup succeeded If I don'tuse ser-mysql, everythings are ok, of course... Any idea? Olivier

3 7

[Serusers] Accounting Failed INVITE Messages
by Java Rockx 04 Mar '05

04 Mar '05

Hi All. How do I get SER to account for failed INVITE messages? For example, if someone attempts to call a PSTN number and they do not have the free-pstn ACL, then our server replies with a 503 Service Unavailable. I'd like to see this appear in the MySQL acc table. Do I just use the setflag() function in the failure route for INVITEs? For example: route { t_on_failure("1"); if (!t_relay()) { sl_reply_error(); break; } } faillure_route[1] { if (method=="INVITE") { setflag(1); } } Regards, Paul

3 6

[Serusers] next_gw() in lcr-module
by Andreas Granig 04 Mar '05

04 Mar '05

Hi, I tried the lcr module for rel_0_9_0 found at http://tutpro.com/tmp/lcr-0.9.0.tgz, but it seems that subsequent calls of next_gw() always return the same gateway as the first call of next_gw(). Do I miss something? Here's my setup: mysql root@ser> select * from lcr; +--------+----------+--------+----------+ | prefix | from_uri | grp_id | priority | +--------+----------+--------+----------+ | | % | 1 | 1 | +--------+----------+--------+----------+ 1 row in set (0.00 sec) mysql root@ser> select * from gw; +-----------------+------------+------+--------+ | gw_name | ip_addr | port | grp_id | +-----------------+------------+------+--------+ | sipgw1.inode.at | 833315646 | 5060 | 1 | | sipgw2.inode.at | 1780932433 | 5060 | 1 | | sipgw3.inode.at | 850092862 | 5060 | 1 | | sipgw4.inode.at | 1797709649 | 5060 | 1 | | sipgw5.inode.at | 866870078 | 5060 | 1 | | sipgw6.inode.at | 883647294 | 5060 | 1 | +-----------------+------------+------+--------+ And in my ser-config I do: route[0] { # ... if(!load_gws()) { sl_send_reply("500", "Internal server error, unable to load gateways"); break; } if(!next_gw()) { sl_send_reply("503", "Service not available, no gateways found"); break; } t_on_failure("2"); # ... t_relay(); } failure_route[2] { if(method == "INVITE" && t_check_status("408|500|503")) { if (!next_gw()) { t_reply("503", "Service not available, no more gateways"); break; } t_on_failure("2"); # ... t_relay(); } } But the failure route 2 always routes to the same gateway as the route 0 or previous calls of failure route 2. Thanks, Andy

3 4

RE: [Serusers] lcr module and column type in DB
by Matt Schulte 04 Mar '05

04 Mar '05

So, just to clear this up. You still have to reverse the ip, so: example: 209.247.17.5 reverses to: 5.17.247.209 which long format comes to: 85063633 Thanks .. ?? -----Original Message----- From: Iqbal [mailto:iqbal@gigo.co.uk] Sent: Wednesday, March 02, 2005 2:55 PM To: jh(a)lohi.tutpro.com Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] lcr module and column type in DB cheers, just what I needed..one thing though I had to reverse the format...not sure if I was doing it wrong or something else. Anyhow for all those with the same problem manually calculating it is IP=A.B.C.D IPlong= A*16777216 + B*65536 + C*256 + D but as mentioned above I for some reason had to do D*16777216 + C*65536 + B*256 + A Iqbal On 3/2/2005, "Juha Heinanen" <jh(a)lohi.tutpro.com> wrote: >Iqbal writes: > > > Any ideas > >yes, you have to put in ip_addr field integer representation of ip >address. use, for example, php's ip2long function. > >-- juha > > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2 1

[Serusers] NAT & SER & IPv4 vs IPv6 (newbie problem)
by Ozan Blotter 04 Mar '05

04 Mar '05

Conditions as follows : * SER runs on a Public IP * SER works without auth & database modules, * Nearly all user behind NAT (but routers configured to do port forwarding for TCP/UDP 5060) to help SER in some cases, * Users numbers in format of 833XXXXXXX 834XXXXXXX and they should call each P2P-SIP-Calls (if not behind NAT), * If a user need to call PSTN end point (SIP Gateway located at 212.154.32.154) the call traffic should flow over SER to SIP Gateway via T1 connection already located between that systems so SER handles all voice traffic by help of RTP Proxy. * UA's registers on SER (Zyxel Prestige 2000, Zyxel Prestige 200W, Cisco ATA186 etc.) Problem is users cannot call each other (if i comment lines for nathelper they can call) It's clear i think, and below is my ser.cfg, what do i need extra or erase. (It was successful without nathelper module and added dial plan) I get this error : root@sipproxy/usr/local/etc/ser> ser 127.0.0.1 -n 1 -ddddddd -D -E 0(4419) read 23490987 from /dev/random 0(4419) seeding PRNG with 1133443665 0(4419) test random number 1528986547 0(4419) shm_mem_init: success 0(4419) DEBUG: register_fifo_cmd: new command (print) registered 0(4419) DEBUG: register_fifo_cmd: new command (uptime) registered 0(4419) DEBUG: register_fifo_cmd: new command (version) registered 0(4419) DEBUG: register_fifo_cmd: new command (pwd) registered 0(4419) DEBUG: register_fifo_cmd: new command (arg) registered 0(4419) DEBUG: register_fifo_cmd: new command (which) registered 0(4419) DEBUG: register_fifo_cmd: new command (ps) registered 0(4419) DEBUG: register_fifo_cmd: new command (kill) registered 0(4419) parse error (60,46-47): parse error 0(4419) parse error (60,46-47): bad command 0(4419) parse error (60,46-47): bad command 0(4419) parse error (60,48-49): bad command 0(4419) parse error (65,6-7): parse error 0(4419) parse error (65,6-7): ERROR: bad config file (6 errors) root@sipproxy/usr/local/etc/ser> <<< ser.cfg. starts here <<< # # /usr/local/etc/ser/ser.cfg 2005/04/03 12:00:00 by Ozan Blotter $ # # simple quick-start config script with nathelper/rtpproxy # for IPv4/IPv6 gatewaying # # ----------- global configuration parameters ------------------------ debug=3 # debug level #fork=yes #log_stderror=no # check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=2 # count of ser processes per interface fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" #Nathelper for RTPproxy loadmodule "/usr/local/lib/ser/modules/nathelper.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam ("nathelper", "rtpproxy_sock", "/var/run/rtpproxy.sock") # ------------------------- request routing logic ------------------- # main routing logic route { # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message Too Big"); break; }; # route invitation request to other domains if (!uri == myself) && method == "INVITE") { record_route(); if (!t_relay()) sl_reply_error(); break; }; if (method == "REGISTER") { if (af == inet) { save ("location_inet4"); } else if (af ==inet6) { save ("location_inet6"); } else { sl_send_reply("403", "Call Cannot Be Served Here"); }; break; }; if (method == "INVITE") { if (lookup("location_inet4")) { # Comment Out Three Lines Below If You Want # RTP for IPv4>IPv4 Calls To Go Directly # Between UAs if (af == inet) if (force_rtp_proxy("FAII")) t_on_reply("1"); # Proxy Session From An Internal IPv4 # Phone To An External IPv6 Address if (af == inet6) if (force_rtp_proxy("FAIE")) t_on_reply("1"); } else if (lookup("location_inet6")) { # Proxy Session From An External IPv6 # Phone To An Internal IPv4 Address if (af == inet) if (force_rtp_proxy(FAEI")) t_on_reply("1"); # Comment Out Three Lines Below If You Want # RTP for IPv6>IPv6 Calls To Go Directly # Between UAs if (af == inet6) if (force_rtp_proxy("FAEE")) t_on_reply("1"); } else { sl_send_reply("403", "Call Cannot Be Served Here"); break; }; }; if (method == "BYE" || method == "CANCEL") unforce_rtp_proxy(); #Do Strict Routing If Pre-Loaded Route Headers Present if (loose_route()) { t_relay(); break; }; if (method == "INVITE") record_route(); if (!t_relay()) sl_reply_error(); } onreply_route[1] { if (!(status=~"183" || status=~"200")) break; force_rtp_proxy("FA"); } >>> ser.cfg. ends here >>>

2 1

[Serusers] Can't contact local users, what am I doing wrong?
by Dana Olson 04 Mar '05

04 Mar '05

(( My ser.cfg is linked to at the end of the email. )) Basically, right now I have an AudioCodes FXO device (10.66.7.250) that registers with the proxy just fine, and when I dial out1 from my softphone (10.66.4.254), it dials to analog port 1 on the FXO, and out2 dials to analog port 2 on the FXO. I can do outbound dialing just fine. However, if I call the phone line plugged into either port, the requests hit the proxy (10.66.7.253) but don't ring the softphone. For example, here is the output from tethereal if I try calling in to port 2: 4260.972077 10.66.7.250 -> 10.66.7.253 SIP/SDP Request: INVITE sip:nbya2@nby-devproxy-01.tlsp.com, with session description 4260.972712 10.66.7.253 -> 10.66.7.250 SIP Status: 404 Not Found 4261.002006 10.66.7.250 -> 10.66.7.253 SIP Request: ACK sip:nbya2@nby-devproxy-01.tlsp.com My softphone (SJphone) is currently registered with the proxy with username nbya2: mysql> select username,domain,contact from location; +--------------+--------+------------------------------+ | username | domain | contact | +--------------+--------+------------------------------+ | nby-mp108-01 | | sip:nby-mp108-01@10.66.7.250 | | nbya1 | | sip:nbya1@10.66.5.99:5060 | | nbya2 | | sip:nbya2@10.66.4.254:5060 | +--------------+--------+------------------------------+ 3 rows in set (0.00 sec) Here is the relevant output from serctrl ul show for that user: ...Record(0x402cd1f8)... domain: 'location' aor : 'nbya2' ~~~Contact(0x402cd238)~~~ domain : 'location' aor : 'nbya2' Contact : 'sip:nbya2@10.66.4.254:5060' Expires : 2846 q : 0.00 Call-ID : '0D8E60D2-D1C3-439E-B099-3A327B6EB737(a)10.66.4.254' CSeq : 2 replic : 0 User-Agent: 'SJLabs-SJphone/1.40.258' State : CS_SYNC Flags : 0 next : (nil) prev : (nil) ~~~/Contact~~~~ .../Record... I've tried dialing from both softphones that you can see listed there in the mysql output, but they don't contact each other either. Here is my ser config: http://aslan.homelinux.com/dana/tmp/ser.cfg So, I'm unsure where to go from here. This proxy is only on my LAN, if that makes any difference to you. I'd prefer to not change to stateful, unless it is mandatory for user lookup, but I didn't find any documentation yet that said that it was. Please let me know what I'm doing wrong. I've been using Google, the admin guide, examples from SIP.edu, voip-info.org, and I've tried the IRC chatroom, but it's quiet right now. -- Dana

1 1

[Serusers] time based routes
by Iqbal 04 Mar '05

04 Mar '05

Hi this is probably a new feature, but would it be possible to have time based callfwd options. eg 1111(a)abc.com ---> 1112(a)abc.com between 9-5, I think this can be done by setting a time field, and returning that result, which is then compared to the machine time. If true alias, else look for next alias. Iqbal

2 1

[Serusers] help nathelpet + rtp proxy
by andri febrian 04 Mar '05

04 Mar '05

hi list.. i am winda i make SER and it work well in local network. when i establish SER server in public network. it cannot run. i have read the milist and the solution are nethelper and mediaproxy/rtp proxy. i want ask how to start to make nathelper+rtp proxy? please explain me step by step?... oh ya.. i also read about rtp proxy, maxim's rtp proxy and media proxy. can you explain me what is the different? Thanks for help....:-) --------------------------------- Yahoo! Messenger - Communicate instantly..."Ping" your friends today! Download Messenger Now

1 0

[Serusers] Limiting REGISTER requests (newbie)
by Jan Louw 04 Mar '05

04 Mar '05

Hi, I'm trying to setup SER to only allow UAs to register their "location" MySQL entry as specified in the "subscriber" table. Currently an authorized user can set an arbritrary value in the "location" table. Whats to prevent 1 authorized user from stealing anothers location entry? For instance: user1 - REGISTER sip:user1.blah.internal user2 - REGISTER sip:user1.blah.internal Now user2 has hijacked user1's location. Thanks JD

2 1

[Serusers] help !!!!!
by harry gaillac 04 Mar '05

04 Mar '05

hi all, I set up ser + serweb + asterisk with 2 ip300 Polycom. ip300 Polycom supporting SUBSCRIBE/NOTIFY/MESSAGE methods. When i set one phone offline (phone is powered and registered in location table) i can't store IM in msilo table.IM is sent to phone if i switch off phone IM is stored in msilo table but when I switch on the phone IM is not dumped to phone. Can I use presence instead of location in order to store IM ? Harry Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

1 0

RE: [Serusers] enum parse problem
by Toni Barata 04 Mar '05

04 Mar '05

Hi juha, Take a look in the ethereal sniffing for both cases (see attach): Thanks for helping us. Best regards, toni -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Juha Heinanen Sent: quinta-feira, 3 de Março de 2005 19:29 To: Toni Barata Cc: serusers(a)lists.iptel.org Subject: [Serusers] enum parse problem Toni Barata writes: > Why enum module is not capable of parsing a response to a naptr query > if this response don´t have any Authority and Additional RRs? this has nothing to do with naptr query. if there is a problem with those authority or additional rrs, it applies to any query. are you sure that in both case (with and without a and aa rrs), rdata containing naptr record looks exactly the same? the format is this: * 0123456789012345 * +----------------+ * | order | * |----------------| * | preference | * |----------------| * ~ flags ~ * | (string) | * |----------------| * ~ services ~ * | (string) | * |----------------| * ~ regexp ~ * | (string) | * |----------------| * ~ replacement ~ | (name) | * +----------------+ i didn't see order/preference in your response or then ethereal is not able to decode rdata properly. -- juha _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] Server does not see REGISTER message
by sandra.garcia.espada＠dmr-consulting.com 04 Mar '05

04 Mar '05

Now I have installed the 0.8.14, and it is the same. What can I do? Sandra García Espada DMR Consulting

1 0

Re: [Serusers] hi all, newbie problem probably
by Mohammad Khan 04 Mar '05

04 Mar '05

First of all, I am not SER expert. From my last couple of weeks learning I will suggest below: Olivier.taylor wrote: > Thx to be so fast, > here is my ser.cfg > # > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > #debug=3 # debug level (cmd line: -dddddddddd) > #fork=yes > #log_stderror=no # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > debug=7 > fork=no > log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > #port=5060 > #children=4 > fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" # <--------- if you want fifo db > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule "/usr/lib/ser/modules/mysql.so" > > loadmodule "/usr/lib/ser/modules/sl.so" > loadmodule "/usr/lib/ser/modules/tm.so" > loadmodule "/usr/lib/ser/modules/rr.so" > loadmodule "/usr/lib/ser/modules/maxfwd.so" > loadmodule "/usr/lib/ser/modules/usrloc.so" > loadmodule "/usr/lib/ser/modules/registrar.so" > > # Uncomment this if you want digest authentication > # mysql.so must be loaded ! > loadmodule "/usr/lib/ser/modules/auth.so" > loadmodule "/usr/lib/ser/modules/auth_db.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > > #modparam("usrloc", "db_mode", 0) > > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") # <---- you need define this, if your database is different than default > modparam("usrloc", "db_mode", 2) > > # -- auth params -- > # Uncomment if you are using auth module > # > #modparam("auth_db", "calculate_ha1", yes) > # > # If you set "calculate_ha1" parameter to yes (which true in this > config), > # uncomment also the following parameter) > # > #modparam("auth_db", "password_column", "password") > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # <----------- i think you want this > > # ------------------------- request routing logic ------------------- > > # main routing logic > alias="finalcut.be" > alias="linux.finalcut.be" > alias="82.146.123.252" its better to put above three lines in global section if your computer ip is 82.146.123.252 you should have listen=82.146.123.252 alias="finalcut.be" alias="linux.finalcut.be" For the rest of your config file, i really can't help. I am also learing to write route logic. > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("70")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if ( msg:len > max_len ) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > if (!www_authorize("82.146.123.252", "subscriber")) { > www_challenge("82.146.123.252", "0"); > break; > }; > > save("location"); > break; > }; > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > # forward to current uri now; use stateful forwarding; that > # works reliably even if we forward from TCP to UDP > if (!t_relay()) { > sl_reply_error(); > }; > > } > > > > > > > > > > > > > Mohammad Khan wrote: > >> you will need something like this in you ser.cfg >> modparam("auth_db", "db_url", "mysql://ser:heslo@localhost/ser") >> modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") >> >> I can tell you better if I could see your ser.cfg >> >> MOhammad >> >> >> Olivier.taylor wrote: >> >>> I installed ser on a linux box centos 3.4 >>> I use mysql 4.10 >>> >>> Furthermore I am noob on Linux and Ser :( >>> >>> I get this messages at boot in the messages file >>> Impossible the for an UA to connect to ser... >>> >>> Help is welcome, >>> regards, >>> >>> Olivier >>> >>> Mar 3 17:12:19 linux ser: WARNING: could not rev. resolve >>> 82.146.123.252 >>> Mar 3 17:12:19 linux ser: Listening on >>> Mar 3 17:12:19 linux ser: 127.0.0.1 [127.0.0.1]:5060 >>> Mar 3 17:12:19 linux ser: 82.146.123.252 >>> [82.146.123.252]:5060 >>> Mar 3 17:12:19 linux ser: Aliases: localhost:5060 >>> localhost.localdomain:5060 82.146.123.252:* linux.finalcut.be:* >>> finalcut.be:* >>> Mar 3 17:12:19 linux ser: Listening on >>> Mar 3 17:12:19 linux ser: 127.0.0.1 [127.0.0.1]:5060 >>> Mar 3 17:12:19 linux ser: 82.146.123.252 >>> [82.146.123.252]:5060 >>> Mar 3 17:12:19 linux ser: Aliases: localhost:5060 >>> localhost.localdomain:5060 82.146.123.252:* linux.finalcut.be:* >>> finalcut.be:* >>> Mar 3 17:12:19 linux ser: Listening on >>> Mar 3 17:12:19 linux ser: 127.0.0.1 [127.0.0.1]:5060 >>> Mar 3 17:12:19 linux ser: 82.146.123.252 >>> [82.146.123.252]:5060 >>> Mar 3 17:12:19 linux ser: Aliases: localhost:5060 >>> localhost.localdomain:5060 82.146.123.252:* linux.finalcut.be:* >>> finalcut.be:* >>> Mar 3 17:12:19 linux ser: ser startup succeeded >>> Mar 3 17:12:19 linux /usr/sbin/ser[2649]: connect_db(): Can't >>> connect to local MySQL server through socket >>> '/var/lib/mysql/mysql.sock' (2) >>> Mar 3 17:12:19 linux /usr/sbin/ser[2649]: db_init(): Error while >>> trying to connect database >>> Mar 3 17:12:19 linux /usr/sbin/ser[2649]: mod_init(): Error while >>> connecting database >>> Mar 3 17:12:19 linux /usr/sbin/ser[2649]: init_mod(): Error while >>> initializing module usrloc >>> >>> _______________________________________________ >>> Serusers mailing list >>> serusers(a)lists.iptel.org >>> http://lists.iptel.org/mailman/listinfo/serusers >> >> >> >> >> Let me know, if it improves the situation. Good Luck MOhammad

3 4

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users