- sr-users - kamailio.org

RE: [Serusers] usrloc and replication
by Matt Schulte 27 Mar '05

27 Mar '05

I see, so if I set the replication value to non-zero, where would that be done at? I didn't do it intentionally of course. Are you suggesting a config thing or more manual such as editing the tables in the db? What was the module name written by Nils? Was it included in any versions of ser? Maybe I'm running this by accident, from what I can tell though my config is pretty standard.Thanks much.. Matt -----Original Message----- From: Jan Janak [mailto:jan@iptel.org] Sent: Saturday, March 26, 2005 2:06 PM To: Marian Dumitru Cc: Matt Schulte; serusers(a)lists.iptel.org Subject: Re: [Serusers] usrloc and replication There was another SER module written by Nils Ohlmeier that replicated the user location contacts to a set of servers and kept the replication state in usrloc. SER itself does not use the replication flag and, as Marian said, you probably set the replicate flag to non-zero value which is not correct. Since you do not have the replication module, there is nothing that would reset the flag and the contact stays in the user location database forever. The replication code was quite complex and it has been abandoned some time ago. I plan to remove the zombie states and all related code to make the usr location simpler. Jan. On 26-03 18:05, Marian Dumitru wrote: > Matt, > > You get the message you mentioned "Keeping binding....." *only* if > the > contact is marked for replication. You can check this either in DB > column replication, either into memory via "serctl ul show". > > As in code the replication flag is hardcoded to 0 (disabled), I would > say you inserted via fifo some contacts with replication value != 0. Or ??? > > If so, I'm not sure if usrloc will ever remove the contact if the > replication flag is still set. > > Best regards, > Marian > > Matt Schulte wrote: > >Thanks for the reponse, I gathered that much. My question is how long > >before the contact gets "removed"? It's late morning now and it's > >still there :-) > > > >-----Original Message----- > >From: Marian Dumitru [mailto:marian.dumitru@voice-sistem.ro] > >Sent: Saturday, March 26, 2005 5:37 AM > >To: Matt Schulte > >Cc: serusers(a)lists.iptel.org > >Subject: Re: [Serusers] usrloc and replication > > > > > >Hi Matt, > > > >After expiration an before being removed, the contact are still kept > >in > >ZOMBIE state - you can see the state in DB changes. > > > >Best regards, > >Marian > > > >Matt Schulte wrote: > > > >>Ok, I'm using usrloc db_mode 2, I understand the timer checks every > >>60 > > > > > >>seconds default to see who should be expired and all. What I don't > >>understand is why I keep getting these messages: > >> > >>Keeping binding '+13142664004','sip:s@69.29.57.253:3105' for > >>replication > >> > >>This contact expired nonetheless and should be removed, is there > >>something I'm missing? > >> > >>+--------------+--------------------------------------+------------- > >>+--------------+--------------------------------------+-- > >>+--------------+--------------------------------------+-- > >>----+ > >>| username | contact | expires > >>| > >>+--------------+--------------------------------------+------------- > >>+--------------+--------------------------------------+-- > >>+--------------+--------------------------------------+-- > >>----+ > >>| +13142664004 | sip:s@69.29.57.253:3105 | 2005-03-26 > >>00:42:35 | > >>| +13142664004 | sip:s@69.29.57.253:3118 | 2005-03-26 > >>01:24:58 | > >>+--------------+--------------------------------------+------------- > >>+--------------+--------------------------------------+-- > >>+--------------+--------------------------------------+-- > >>----+ > > > > > > > > > -- > Voice System > http://www.voice-system.ro > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2 1

RE: [Serusers] "serctl moni" shows waiting stateful transactions
by Matt Schulte 27 Mar '05

27 Mar '05

I wonder if its caused from a process hanging even, do you do any external scripts, usrloc, or any kind of live db lookups? I do, we're in the process of nuking most of our external scripts because some just plain take too long and tend to hang up SER on a heavy day.. I would be more-so intertested in a module to deal with these 'slow' or runaway processes, just as a precautionary statement even. Of course that may be unneccesary in the eyes of the beholder :-) Matt -----Original Message----- From: Java Rockx [mailto:javarockx@gmail.com] Sent: Saturday, March 26, 2005 4:03 PM To: Matt Schulte Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] "serctl moni" shows waiting stateful transactions Yes, that is what I'm afraid of. I do all stateful stuff with rr also. I'm real concerned about this. I just thought that SER would kill off any pending transactions if when the delete_timer expires - so now I assume this is not what the delete_timer does. I guess I just don't understand what could keep this alive. I've been watching my SER all day it the transaction is still there. Regards, Paul On Sat, 26 Mar 2005 15:54:50 -0600, Matt Schulte <mschulte(a)netlogic.net> wrote: > Hmm, I get these too after long periods of time. I wonder if there was > a 487 or 408 that never got caught (or never replied to..??). I use > all stateful too with rr, if that helps. > > Matt > > -----Original Message----- > From: Java Rockx [mailto:javarockx@gmail.com] > Sent: Saturday, March 26, 2005 1:07 PM > To: serusers(a)lists.iptel.org > Subject: [Serusers] "serctl moni" shows waiting stateful transactions > > Hi All. > > Occasionally I see a waiting transaction in "serctl moni". These > waiting transactions never seem to get processed because they never > disappear. > > Can anyone give a hint as to why I might see such a thing? > > Regards, > Paul > > [cycle #: 1773; if constant make sure server lives and fifo is on] > Server: Sip EXpress router (0.9.1 (i386/linux)) > Now: Sat Mar 26 14:03:06 2005 > Up Since: Fri Mar 25 21:14:41 2005 > Up time: 60505 [sec] > > Transaction Statistics > Current: 0 (1 waiting) Total: 955 (0 local) > Replied localy: 1066 > Completion status 6xx: 0, 5xx: 0, 4xx: 301, 3xx: 0,2xx: 656 > > Stateless Server Statistics > 200: 11568 202: 0 2xx: 0 > 300: 0 301: 0 302: 0 3xx: 0 > 400: 0 401: 2376 403: 8 404: 464 407: 31 408: 0 483: 0 4xx: 0 > 500: 0 5xx: 0 > 6xx: 0 > xxx: 4707 > failures: 0 > > UsrLoc Stats > Domain Registered Expired > 'location' 28 10 > 'aliases' 4 0 > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers >

3 5

RE: [Serusers] "serctl moni" shows waiting stateful transactions
by Matt Schulte 27 Mar '05

27 Mar '05

Hmm, I get these too after long periods of time. I wonder if there was a 487 or 408 that never got caught (or never replied to..??). I use all stateful too with rr, if that helps. Matt -----Original Message----- From: Java Rockx [mailto:javarockx@gmail.com] Sent: Saturday, March 26, 2005 1:07 PM To: serusers(a)lists.iptel.org Subject: [Serusers] "serctl moni" shows waiting stateful transactions Hi All. Occasionally I see a waiting transaction in "serctl moni". These waiting transactions never seem to get processed because they never disappear. Can anyone give a hint as to why I might see such a thing? Regards, Paul [cycle #: 1773; if constant make sure server lives and fifo is on] Server: Sip EXpress router (0.9.1 (i386/linux)) Now: Sat Mar 26 14:03:06 2005 Up Since: Fri Mar 25 21:14:41 2005 Up time: 60505 [sec] Transaction Statistics Current: 0 (1 waiting) Total: 955 (0 local) Replied localy: 1066 Completion status 6xx: 0, 5xx: 0, 4xx: 301, 3xx: 0,2xx: 656 Stateless Server Statistics 200: 11568 202: 0 2xx: 0 300: 0 301: 0 302: 0 3xx: 0 400: 0 401: 2376 403: 8 404: 464 407: 31 408: 0 483: 0 4xx: 0 500: 0 5xx: 0 6xx: 0 xxx: 4707 failures: 0 UsrLoc Stats Domain Registered Expired 'location' 28 10 'aliases' 4 0 _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

3 2

[Serusers] Error 1045. Access denied
by Armando Alvarez 26 Mar '05

26 Mar '05

Hello everybody, Im starting in SER configuration and I want to have de database ser, so im using the next instruction for it but it display me a ERROR. Could somebody help me??? Thanks in advance [root@localhost sbin]# ser_mysql.sh create MySql password for root: Domain (realm) for the default user admin: (--------- I have a doubt : which Domain I have to use????) Creating database ser ERROR 1290 (HY000) at line 5: The MySQL server is running with the skip-grant-tables option so it cannot execute this statement ------ displaying this error I stopped mysql and started it whit mysqld & ------ and trying now with the ser_mysql shows another error.. [root@localhost sbin]# ser_mysql.sh create MySql password for root: Domain (realm) for the default user admin: Creating database ser Error 1045 (28000): Access denied for user root@localhost.localdomain (using password:YES) Best regards, Armando Alvarez.

1 0

[Serusers] "serctl moni" shows waiting stateful transactions
by Java Rockx 26 Mar '05

26 Mar '05

Hi All. Occasionally I see a waiting transaction in "serctl moni". These waiting transactions never seem to get processed because they never disappear. Can anyone give a hint as to why I might see such a thing? Regards, Paul [cycle #: 1773; if constant make sure server lives and fifo is on] Server: Sip EXpress router (0.9.1 (i386/linux)) Now: Sat Mar 26 14:03:06 2005 Up Since: Fri Mar 25 21:14:41 2005 Up time: 60505 [sec] Transaction Statistics Current: 0 (1 waiting) Total: 955 (0 local) Replied localy: 1066 Completion status 6xx: 0, 5xx: 0, 4xx: 301, 3xx: 0,2xx: 656 Stateless Server Statistics 200: 11568 202: 0 2xx: 0 300: 0 301: 0 302: 0 3xx: 0 400: 0 401: 2376 403: 8 404: 464 407: 31 408: 0 483: 0 4xx: 0 500: 0 5xx: 0 6xx: 0 xxx: 4707 failures: 0 UsrLoc Stats Domain Registered Expired 'location' 28 10 'aliases' 4 0

1 0

[Serusers] SER+ASTERISK+SIMPLE
by harry gaillac 26 Mar '05

26 Mar '05

Hi all, I wish to use Asterisk for registration and Ser as outbound proxy. My phones support SIMPLE for presence and messages but Asterisk not. May I setup SER in order to relay SUBSCRIBE/NOTIFY messages between phones registered on Asterisk for presence ? Regards Harry __________________________________________________________________ Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

1 0

RE: [Serusers] usrloc and replication
by Matt Schulte 26 Mar '05

26 Mar '05

Ok, it's starting to make a little more sense. I didn't force anything by hand, the replication flag (in db) is a much higher number than the other usrloc replication flags though. Is this format unixtime? Is there any documentation on this subject? I have yet to find any definitive. Like I said before I didn't force any replication values, I thought that was all automatic. :) Thanks for your patience, I just wish this was documented a little more :-( Matt -----Original Message----- From: Marian Dumitru [mailto:marian.dumitru@voice-sistem.ro] Sent: Saturday, March 26, 2005 11:05 AM To: Matt Schulte Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] usrloc and replication Matt, You get the message you mentioned "Keeping binding....." *only* if the contact is marked for replication. You can check this either in DB column replication, either into memory via "serctl ul show". As in code the replication flag is hardcoded to 0 (disabled), I would say you inserted via fifo some contacts with replication value != 0. Or ??? If so, I'm not sure if usrloc will ever remove the contact if the replication flag is still set. Best regards, Marian Matt Schulte wrote: > Thanks for the reponse, I gathered that much. My question is how long > before the contact gets "removed"? It's late morning now and it's > still there :-) > > -----Original Message----- > From: Marian Dumitru [mailto:marian.dumitru@voice-sistem.ro] > Sent: Saturday, March 26, 2005 5:37 AM > To: Matt Schulte > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] usrloc and replication > > > Hi Matt, > > After expiration an before being removed, the contact are still kept > in > ZOMBIE state - you can see the state in DB changes. > > Best regards, > Marian > > Matt Schulte wrote: > >>Ok, I'm using usrloc db_mode 2, I understand the timer checks every 60 > > >>seconds default to see who should be expired and all. What I don't >>understand is why I keep getting these messages: >> >>Keeping binding '+13142664004','sip:s@69.29.57.253:3105' for >>replication >> >>This contact expired nonetheless and should be removed, is there >>something I'm missing? >> >>+--------------+--------------------------------------+--------------- >>+--------------+--------------------------------------+-- >>----+ >>| username | contact | expires >>| >>+--------------+--------------------------------------+--------------- >>+--------------+--------------------------------------+-- >>----+ >>| +13142664004 | sip:s@69.29.57.253:3105 | 2005-03-26 >>00:42:35 | >>| +13142664004 | sip:s@69.29.57.253:3118 | 2005-03-26 >>01:24:58 | >>+--------------+--------------------------------------+--------------- >>+--------------+--------------------------------------+-- >>----+ > > > -- Voice System http://www.voice-system.ro

2 1

[Serusers] How to hang up a call
by Nicolas Ruiz 26 Mar '05

26 Mar '05

Hello ! UA -----> SER -----> GW -------> PSTN How can I send a BYE to my GW with SER ??? I have test with sipsak to send a BYE, but My GW don't reply to the BYE messages. Thanks for your help. Best Regards, Nicolas RUIZ FRANCE, PARIS

2 4

Re: [Serusers] how to use accounting with ser_radius
by Kamran Ahmad 26 Mar '05

26 Mar '05

i have done this http://www.iptel.org/ser/doc/ser_radius/ser_radius.html. one thing i cant find any log under /usr/local/var/log/radius/radacct or /var/log/radius/radacct i dont know how to invoke accounting here is my ser.cfg # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) #memlog=3 #sip_warning=yes #server_signature=yes #mhomed=0 #uid="kamran" #gid="kamran" /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") #modparam("auth_radius","radius_log","/usr/local/var/log/radius/radacct") modparam("auth_radius","service_type",15) #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) #modparam("auth_radius", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") #modparam("auth_radius", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy #modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route { # initial sanity checks -- messages with # max_forwards==0, or excessively long requests log(1,"inside route"); if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol log(1,"calling record_route"); record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) log(1,"checking register:uri="); #log(1,uri); #log(1,myself); if (uri==myself) { log(1,"checking Register Message received"); if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("mydomain.com", "subscriber")) { # www_challenge("mydomain.com", "0"); # break; # }; log(1,"Register Message received"); if (!radius_www_authorize("")) { www_challenge("", "0"); break; } save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP # if requests URI is numerical and starts with # zero, forward statelessly to a static destination if (!t_relay()) { sl_reply_error(); }; } --- Iqbal <iqbal(a)gigo.co.uk> wrote: > > the acc module is in SER NOT radius, its under the > modules directory. IN > the acc directory, there is a Makefile, open it up, > in there there are > two lines one for mysql accouting and one for > radius, they will not work > both together, hence u uncomment the line u need and > then recompile > > Iqbal > > On 3/26/2005, "Kamran Ahmad" <p_kami(a)yahoo.com> > wrote: > > >hello Marian > > > >i cant find /modules/acc/Makefile in my > >freeradius-1.0.2. one thing more > >what is the configuration requiment for SER. can > you > >send me ser configuration. > > > >Thanks > >Kamran > > > > > >--- Marian Dumitru <marian.dumitru(a)voice-sistem.ro> > >wrote: > >> Hello Kamro, > >> > >> First you have to enable RADIUS support in acc > >> module - uncomment > >> corresponding lines in modules/acc/Makefile and > >> recompile. > >> Then configure your radius client library and > server > >> for accounting. > >> > >> Best regards, > >> Marian > >> > >> Kamran Ahmad wrote: > >> > hello > >> > > >> > > >> > Finally i am able to use authentication from > >> radius > >> > (Thanks to all who helped me). Now i want to > use > >> > accounting from radius. Can any one tell me how > to > >> do > >> > this > >> > > >> > regrads > >> > Kamran > >> > > >> > > >> > > >> > __________________________________ > >> > Do you Yahoo!? > >> > Yahoo! Small Business - Try our new resources > >> site! > >> > http://smallbusiness.yahoo.com/resources/ > >> > > >> > _______________________________________________ > >> > Serusers mailing list > >> > serusers(a)lists.iptel.org > >> > http://lists.iptel.org/mailman/listinfo/serusers > >> > >> > >> -- > >> Voice System > >> http://www.voice-system.ro > >> > > > > > > > >__________________________________ > >Do you Yahoo!? > >Make Yahoo! your home page > >http://www.yahoo.com/r/hs > > > >_______________________________________________ > >Serusers mailing list > >serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > > > > > __________________________________ Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://smallbusiness.yahoo.com/resources/

2 1

[Serusers] How Do I Enable Session Timers On PSTN->SIP Calls?
by Java Rockx 26 Mar '05

26 Mar '05

Hi All. Our PSTN gateway supports Session-Expires for re-INVITEs. The session timer is "automagically" enabled when dialing SIP->PSTN. However, when calling PSTN->SIP re-INVITEs do not happen, however the PSTN GW does support them. I think the problem is that PSTN->SIP calls need to (for some reason) explicitly request session timers. How would I request this? I know I can add the "Session-Expires: 120;refresher=??" header, but do I then do this in the 200OK response back to the PSTN GW? Also, if the PSTN->SIP call is asking the PSTN GW to enable session timers, would the "refresher=" tag be set to UAS or UAC? Regards, Paul

5 7

Re: [Serusers] how to use accounting with ser_radius
by Kamran Ahmad 26 Mar '05

26 Mar '05

hello Marian i cant find /modules/acc/Makefile in my freeradius-1.0.2. one thing more what is the configuration requiment for SER. can you send me ser configuration. Thanks Kamran --- Marian Dumitru <marian.dumitru(a)voice-sistem.ro> wrote: > Hello Kamro, > > First you have to enable RADIUS support in acc > module - uncomment > corresponding lines in modules/acc/Makefile and > recompile. > Then configure your radius client library and server > for accounting. > > Best regards, > Marian > > Kamran Ahmad wrote: > > hello > > > > > > Finally i am able to use authentication from > radius > > (Thanks to all who helped me). Now i want to use > > accounting from radius. Can any one tell me how to > do > > this > > > > regrads > > Kamran > > > > > > > > __________________________________ > > Do you Yahoo!? > > Yahoo! Small Business - Try our new resources > site! > > http://smallbusiness.yahoo.com/resources/ > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > -- > Voice System > http://www.voice-system.ro > __________________________________ Do you Yahoo!? Make Yahoo! your home page http://www.yahoo.com/r/hs

2 1

[Serusers] SER CVS Head Version
by Aisling O'Driscoll 26 Mar '05

26 Mar '05

Hi, Could someone let me know how to build SER from the cvs head i.e. the commands? Im trying to get CPL working with SER but when I run "patch -p0 <modules/cpl-c/tm.patch" in the sip_router directory, The patch doesnt apply properly. Since I cant apply this patch my only alternative is to use SER cvs head version. Thanks, Aisling -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

6 7

[Serusers] re-INVITE and bye
by kaiser 26 Mar '05

26 Mar '05

Hi, I have a question that if a proxy send a re-invite to a UA, and almost at that moment, UA hangup. If network is slow, the packet delay could cause a funny situation. That UA ring after hangup... For example t0(0 sec):proxy send reinvite to UA to a existed call t1(0.1 sec):UA send BYE or Cancel to proxy, because user hangup, t2(0.2 sec):UA receive the reivite from proxy. at this senario, UA receives an re-invite "INVITE" , would this reinvite cause the IP-phone ring when "hangup"? Of course, this is not always happen, but it could be happen, right? The Cseq is different, UA would treat the re-invite as a new call. Is it right? best regard kaiser

2 1

[Serusers] unable to execute my script
by Vyom A 26 Mar '05

26 Mar '05

Hi all, I posted this some time ago, I didnt get any replies, can anyone please help me! I am unable to execute any script with exec_dset or exec_msg I have the exec.so module loaded, and I tried adding this : if (uri =~ "sip:[a-zA-Z]*@10\.232\.2\.225") { exec_dset (<path to the script>); } I have not made any changes except for adding this in the example config file.The script has proper permissions. The script is never executed!. What can be the problem --------------------------------- Do you Yahoo!? Make Yahoo! your home page

2 1

[Serusers] usrloc and replication
by Matt Schulte 26 Mar '05

26 Mar '05

Ok, I'm using usrloc db_mode 2, I understand the timer checks every 60 seconds default to see who should be expired and all. What I don't understand is why I keep getting these messages: Keeping binding '+13142664004','sip:s@69.29.57.253:3105' for replication This contact expired nonetheless and should be removed, is there something I'm missing? +--------------+--------------------------------------+----------------- ----+ | username | contact | expires | +--------------+--------------------------------------+----------------- ----+ | +13142664004 | sip:s@69.29.57.253:3105 | 2005-03-26 00:42:35 | | +13142664004 | sip:s@69.29.57.253:3118 | 2005-03-26 01:24:58 | +--------------+--------------------------------------+----------------- ----+

2 1

[Serusers] how to use accounting with ser_radius
by Kamran Ahmad 26 Mar '05

26 Mar '05

hello Finally i am able to use authentication from radius (Thanks to all who helped me). Now i want to use accounting from radius. Can any one tell me how to do this regrads Kamran __________________________________ Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://smallbusiness.yahoo.com/resources/

2 1

[Serusers] SIP Transaction and avpops
by PHAN, Quang-Minh (Docteur Ordinateur) 26 Mar '05

26 Mar '05

Hi All, I have the following scenario: There are 2 SER instants: Ser-1 and Ser-2 running on 2 machines. All the two are responsible for the domain example.com. Ser-1 is for outgoing calls and Ser-2 is for incoming calls. Alice(a)example.com wants to call Bob(a)example.com, so she sends an INVITE bob(a)example.com to Ser-1. Ser-1 forwards the call to Ser-2. Ser-2 tries to locate Bob but Bob's softphone is not registered. Fortunately, example.com has implemented "call forwarding on unavailable" service and Bob is using this. He wants to forward all his calls to Bob(a)somewhere.com, so Ser-2 replaces the URI of the INVITE by bob.somewhere.com and forward the call back to Ser-1 (as Ser-1 is responsible for all outgoing calls). My question is would it be possible that Ser-1 thinks that the 2 INVITEs (INVITE bob.example.com and INVITE bob.somewhere.com) passing through it belong to the same transaction? (Because they have the same CALL-ID, Fromtag and Totag). If so, How can I do to make them become 2 different transactions? Thank you very much for your help, Minh

2 1

Re: [Serusers] SER CVS Head Version
by Aisling O'Driscoll 26 Mar '05

26 Mar '05

Im sorry that I wasnt clear first time around...Onsip supports 0.9.0 upwards so when I ran the instructions for cvs update in the getting started 2 doc no changes were made.... What I am stuck with is that I am currently running 0.8.14 and I want to run 0.9.0. So if someone would be so kind as to give me details of what commands I should run to to update from 0.8.14 to 0.9.0 I would be very grateful. Kindest Regards, Aisling. > >---- Original Message ---- >From: javarockx(a)gmail.com >To: ashling.odriscoll(a)cit.ie >Subject: Re: [Serusers] SER CVS Head Version >Date: Thu, 24 Mar 2005 11:14:00 -0500 > >>We have this fully documented at http://www.onsip.org >> >>Just download the Getting Started Issue 02 document. >> >>Regards, >>Paul >> >> >>On Thu, 24 Mar 2005 14:28:26 -0000, Aisling O'Driscoll >><ashling.odriscoll(a)cit.ie> wrote: >>> Hi, >>> >>> Could someone let me know how to build SER from the cvs head i.e. >the >>> commands? Im trying to get CPL working with SER but when I run >"patch >>> -p0 <modules/cpl-c/tm.patch" in the sip_router directory, The >patch >>> doesnt apply properly. Since I cant apply this patch my only >>> alternative is to use SER cvs head version. >>> >>> Thanks, >>> Aisling >>> >>> -------------------Legal >Disclaimer--------------------------------------- >>> >>> The above electronic mail transmission is confidential and >intended only for the person to whom it is addressed. Its contents >may be protected by legal and/or professional privilege. Should it be >received by you in error please contact the sender at the above >quoted email address. Any unauthorised form of reproduction of this >message is strictly prohibited. The Institute does not guarantee the >security of any information electronically transmitted and is not >liable if the information contained in this communication is not a >proper and complete record of the message as transmitted by the >sender nor for any delay in its receipt. >>> >>> _______________________________________________ >>> Serusers mailing list >>> Serusers(a)iptel.org >>> http://mail.iptel.org/mailman/listinfo/serusers >>> >> >>-------------------Legal >Disclaimer--------------------------------------- >> >>The above electronic mail transmission is confidential and intended >only for the person to whom it is addressed. Its contents may be >protected by legal and/or professional privilege. Should it be >received by you in error please contact the sender at the above >quoted email address. Any unauthorised form of reproduction of this >message is strictly prohibited. The Institute does not guarantee the >security of any information electronically transmitted and is not >liable if the information contained in this communication is not a >proper and complete record of the message as transmitted by the >sender nor for any delay in its receipt. >> >> -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

1 0

[Serusers] isdngw connecting to PSTN
by Nicky 26 Mar '05

26 Mar '05

Hi, I have encountered the problem when I tried to connect SIP to PSTN using the isdngw. Please advice what can be the problem and is there any guidelines for connecting to PSTN beside using the isdn.conf file, is there anything to take note. I keep getting a engaged tone. Please help....thank you. Mar 24 18:08:02 /usr/local/sbin/ser[9301]: ERROR: vm: db_query() failed. Mar 24 18:08:02 /usr/local/sbin/ser[9301]: ERROR: vm: vm_get_user_info failed Mar 24 18:08:02 /usr/local/sbin/ser[9301]: could not contact isdngw regards, nicky

2 2

[Serusers] RPID Handling in ser 0.9.0/0.9.1
by Francesco Bottà 25 Mar '05

25 Mar '05

Hi all, what's the best way to fetch rpid value from DB in SER release 0.9.0 and 0.9.1? In my test, I've set this 2 modparam line: modparam("auth_db", "avps_column_int", "domn") modparam("auth_db", "avps_column_str", "uuid|rpid") and the function append_rpid_hf("<", ">;party=calling;id-type=subscriber;screen=yes;privacy=off"); is called before t_relay(). But in the release 0.9.0 SER is unable to fetch the rpid value from DB and the call failed when is parsed from my DSS-1 Gateway, wheter in 0.9.1 release all works well. I've, as usual, provisioned the rpid values with 'serctl rpid add' tool. What I'm wrong or missing in my ser.cfg file? Another question....the 2 modparam above seems to be no more mandatory in the 0.9.1....is it ok?? Many thanx Verbal

1 0

[Serusers] HELP: Why does SER not absorb this re-INVITE?
by Java Rockx 25 Mar '05

25 Mar '05

Hi all. I have a big problem and I really need some help. re-INVITE messages are not properly processed during __random__ call durations. Sometimes a call can exceed 1 hour and sometimes a call is only two minutes, then ser improperly processes a re-INVITE and a 408 Request Timeout is sent back to the Sonus GW, which then drops the call. Attached is a partial call log that begins with a re-INVITE. NOTE: this is __NOT__ the first re-INVITE of this call. This call lasted more than 30 minutes and re-INVITEs were sent on a 2 minute interval. Anyhow, the re-INVITE is processed and the SIP phone ACKed it, however another re-INVITE got sent from the Sonus GW which ser incorrectly tried to send to the SIP UA. The SIP UA correctly ignored the re-INVITE since it just ACKed it. SER retransmits the re-INVITE to the SIP UA until the fr_invite timer expires, then it sends a 408 Request Timeout back to the Sonus GW, which then disconnects the call and sends ser a BYE message. Is this a bug in the ser TM module? Shouldn't ser just absorb the re-INVITE since it just ACKed it rather than trying to send the re-INVITE to the SIP UA? The Sonus guys say that this is an error in the ser SIP stack. Please help. I'm really stuck with this one. Regards, Paul

2 2

[Serusers] serctl updated: added support for dbtext DB
by Cesc Santasusana 25 Mar '05

25 Mar '05

Hi, I have added "a few" lines to the serctl script, to support DBText. I have tested it, and it seems to work just fine. Of course, the output of certain commands is not as fancy as with MySQL, but then, I could not come up with a way to port the sql query's to text files :) I have to say, also, that I did some other 'beauty' changes. For example, i converted all the spaces into tabs, for indentation purposes. Also, some of the echoed messages i have added some carriage returns, just to make the output look "better". And rewritten a few lines in the usage function. How to get it to work? To use dbtext instead of mysql, the scripts needs a variable "SER_DB", to be set to SER_DB="dbtext". If not found, it creates it and defaults to SER_DB="mysql". Also, if using dbtext, we need the path to access the files. Set DBTEXT_PATH="/path/to/dbtext" (it defaults to /usr/local/etc/ser/dbtext) I added a command to serctl ("serctl dbtext [dbtext_path]"). When called, it creates the needed dbtext files (it dumps the first line, where the fields are described). They are in the same order as in the mysql tables. The rest is just as with mysql. I did not add any feature, not remove any (i think). Whenever it is turn to write to a mysql table, instead, the dbtext files are edited (no locking mechanism for the files, sorry). Can someone give it a try? I don't think many people use dbtext, but it is nice to have it supported in serctl. And maybe it can make its way to the cvs ... Regards, Cesc Santa PS - If you test it and find bugs, please, give me feedback to improve it. PS2 - I would provide a diff ... but for some reason, it just doesn't work in my linux. Too many changes? it would just delete the old file, and write all the new lines :) unclassified

1 0

[Serusers] Please HELP: TM Module Question
by Java Rockx 25 Mar '05

25 Mar '05

Hi All. I have a problem which I think is a Sonus issue, but I need to make sure before I blame someone else for what could be my problem. The issue is related to re-INVITE messages from a Sonus PSTN gateway to my SER-0.9.1 sip proxy. Sometimes the Sonus box sends us a retransmitted re-INVITE for which SER just sent a 200OK. It occasionally does this even considering we originally reply with a 100Try message. So what SER then does is forwards the retransmitted re-INVITE to the SIP UA, but the SIP UA ignores this re-INVITE because it just sent a 200OK for the original re-INVITE. SER keeps trying to send the re-INVITE to the SIP UA until it times out, then it replies to the Sonus GW with a 407 Request Timeout and then Sonus disconnects the call and sends SER a BYE message. Now what I didn't mention yet is that when ser sends a 200OK response back to the Sonus box in reponse to the original re-INVITE, rather than getting an ACK back from Sonus we get a retransmitted re-INVITE and then we get the ACK. So since the SIP UA is smart enough to know not to response to the retransmitted re-INVITE, shouldn't SER also be smart enough and just absorb it rather than relaying it to the SIP UA? Anyhow a picture is worth a million words so here is a SIP message log that begins with a re-INVITE from the Sonus GW. NOTE 1: SER is located behind a Cisco 3600 so the ALG functionality in the 3600 has rewritten all the IP address (ie, the 10.3.0.0 network). NOTE 2: This problem seems to be random. Some calls are very short and others are very long before the disconnect happens - and still others are perfectly fine for the call duration. NOTE 3: Sonus sends SER a re-INVITE every two minutes. Can anyone please confirm that ser has indeed handled this re-INVITE properly and that Sonus is actually incorrectly processing calls? Is there a way to hack a band-aide here in the event that the problem is Sonus and they will not fix their side? Regards, Paul

2 1

[Serusers] SER+MYSQL+FREERADIUS
by Ing. Pasquale Biafora 25 Mar '05

25 Mar '05

I have installed SER on a Server and FREERADIUS+MYSQL on other Server. When I try to connect at SER with a client Sip, the RADIUS response it's the follow: "Auth: Login incorrect: [barney(a)mydomain.it/<no User-Password attribute>] (from client xxx port 5060)" It seem that RADIUS don't send a correctly reply at SER. Infact the Log of SER it's ". SER [3561] rc_check_reply: received non-matching id in RADIUS server response" Thanks Pasquale Biafora

1 0

[Serusers] how to debug messages
by Kamran Ahmad 25 Mar '05

25 Mar '05

hello can any one tell me how to debug the messages from ser i want to check that if my ser is calling radius authenticate kamran __________________________________ Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://smallbusiness.yahoo.com/resources/

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users