sr-users

sr-users@lists.kamailio.org

21 participants
37572 discussions

Disjoint REGISTER and INVITE username/uri sets
by James Cloos 10 Apr '14

10 Apr '14

Given a proxy where the only registrations will be next-hop pbxes, where those names will not be INVITEable, what is the ideal way to tell kama the list of accepted usernames and authentication info for REGISTER? It is important to ensure that any INVITE to any of the REGISTERable usernames 404s. Thanks, -JimC -- James Cloos <cloos(a)jhcloos.com> OpenPGP: 1024D/ED7DAEA6

3 3

carrierroute prefix regex?
by Igor Potjevlesch 10 Apr '14

10 Apr '14

Hello, I'm wondering if we can set into < scan_prefix > an entrier with regex like : 3[0-9]{3}? If not, what would be the best module to manage in a DB the prefix that can be composed by SIP clients before call cr_route? Something equivalent to a dialplan I guess. Thanks for your feedback. Regards, Igor.

1 1

Re: [SR-Users] How Do you Stack up Against Cisco's Call Manager
by Marjorie Lawrence 10 Apr '14

10 Apr '14

Hi, Not sure if this is a fair question. But how do you compare your call processing engine against Cisco's Call Manager? Appreciate your time. Marjorie Lawrence Global Wireless Networks, Inc. Senior Voice Engineer/Unified Communications Email: <mailto:Marjorie@gwnwireless.com> Marjorie(a)gwnwireless.com Website: <http://www.gwnwireless.com/> http://www.gwnwireless.com Office (301)674-5933

1 0

how to track down issue with shared lines
by mark li 10 Apr '14

10 Apr '14

I have a scenario where calls that are transferred to a shared line doesn't trigger the "in use" light to show up on both phones that have the shared line. but when i make an outgoing call, let's say, using the shared line, the "in use" light lights up on both phones that have the shared line. Phone - polycom 650s. Just a noob with SIP, kamailio and telecom, so not sure where to start debugging. Any suggestions would be appreciated. thanks in advance for your time.

1 0

Load fr_inv_timer from DB
by Igor Potjevlesch 10 Apr '14

10 Apr '14

Hello, I try to set the "fr_inv_timer" dynamically from DB. Under 60s it works fine. But I can't set more than 60s. Here are the TM parameters: # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 5000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 60000) Here are the instructions to set dynamically: avp_db_load("$ruri/username", "$avp(s:inv_timeout)/usr_timeout"); t_set_fr($avp(s:inv_timeout)*1000); Is there anything wrong? Regards, Igor.

1 0

topoh and onhold reinvites
by Daniel Tryba 10 Apr '14

10 Apr '14

I'm having some trouble with kamailio that uses the topology hider module and an incoming call being put onhold by the caller. The INVITE containing the sdp a=sendonly is to the 172.19.162.1 (the topoh mask_ip) contact header from the 200 OK to the initial INVITE. U 109.235.36.178:5060 -> 109.235.32.40:5060 INVITE sip:172.19.162.1:5060;line=pcs- mp4KWiTsxRmtEAM3WGysx7y3xGnoxAxtuAxSuA7KEsktxGZKWgQfZD6smqlf9Gttzjy*;user=phone SIP/2.0. This is handled within dialog (has_totag() && !loose_route()), which in the default config ends in a sl_send_reply("404","Not here") Explicitly handing INVITE (just relaying), results in the INVITE being sent to 172.19.162.1 (which doesn't exist) U 109.235.32.40:5060 -> 172.19.162.1:5060 INVITE sip:172.19.162.1:5060;line=pcs- mp4KWiTsxRmtEAM3WGysx7y3xGnoxAxtuAxSuA7KEsktxGZKWgQfZD6smqlf9Gttzjy*;user=phone SIP/2.0. How to get this INVITE to the actual destination? To get the same result for the INVITE as for the ACK to the 200 OK? U 109.235.32.40:5060 -> 109.235.36.178:5060 SIP/2.0 200 OK. ... Contact: <sip:172.19.162.1;line=pcs- mp4KWiTsxRmtEAM3WGysx7y3xGnoxAxtuAxSuA7KEsktxGZKWgQfZD6smqlf9Gttzjy*>. U 109.235.36.178:5060 -> 109.235.32.40:5060 ACK sip:172.19.162.1;line=pcs- mp4KWiTsxRmtEAM3WGysx7y3xGnoxAxtuAxSuA7KEsktxGZKWgQfZD6smqlf9Gttzjy* SIP/2.0. U 109.235.32.40:5060 -> 109.235.34.107:5060 ACK sip:+31756418030@109.235.34.107:5060;transport=udp SIP/2.0. -- POCOS B.V. - Croy 9c - 5653 LC Eindhoven Telefoon: 040 293 8661 - Fax: 040 293 8658 http://www.pocos.nl/ - http://www.sipo.nl/ K.v.K. Eindhoven 17097024

2 3

ldap SSL
by Slava Bendersky 10 Apr '14

10 Apr '14

Hello Everyone, How I can specify ldap CA cert in ldap configuration ? The directive ca_list bellow is ignored. [07/Apr/2014:13:40:37 -0400] conn=20 op=-1 fd=70 closed - Peer does not recognize and trust the CA that issued your certificate. [07/Apr/2014:13:40:37 -0400] conn=22 op=-1 fd=64 closed - Encountered end of file. Current config ldap_server_url = "ldaps://ds389.network.com" ldap_bind_dn = "uid=adm,ou=People,dc=network,dc=com" ldap_bind_password = "password" authtype = simple tls = on ca_list = /etc/kamailio/cert/ca-cert_ldap.pem

2 3

$sel(tls.peer.subject.cn) error
by Juha Heinanen 10 Apr '14

10 Apr '14

i have these two lines in config: $var(common_name) = @tls.peer.subject.cn; $var(common_name) = $sel(tls.peer.subject.cn); the latter gives error at startup: 0(24214) ERROR: <core> [select.c:316]: resolve_select(): Unable to resolve select 'tls' at level 0 0(24214) ERROR: <core> [select.c:177]: w_parse_select(): parse_select: error while resolve_select 'tls.peer.subject.cn' 0(24214) ERROR: pv [pv_select.c:45]: pv_parse_select_name(): invalid select name [tls.peer.subject.cn] 0(24214) ERROR: <core> [pvapi.c:839]: pv_parse_spec2(): pvar "sel" has an invalid name param [tls.peer.subject.cn] 0(24214) ERROR: <core> [pvapi.c:994]: pv_parse_spec2(): wrong char [)/41] in [$sel(tls.peer.subject.cn)] at [24 (5)] 0(24214) : <core> [cfg.y:3408]: yyerror_at(): parse error in config file /etc/sip-proxy/sip-proxy.cfg, line 874, column 29-53: Can't get from cache: $sel(tls.peer.subject.cn) ERROR: bad config file (1 errors) based on pseudo variable wiki page, the syntax should be correct. what is wrong with $sel(tls.peer.subject.cn)? -- juha

2 5

Re: [SR-Users] LCR
by Keith 10 Apr '14

10 Apr '14

Hi, I am having issues with trying to use multiple lcr_ids so I can route to different groups. When I reload lcr it always only shows one group. I have copied the first group exactly and just changed the number but can't work out why it's not working. Any ideas? Thanks Keith

2 1

Exported params of USRLOC module
by aawaise 10 Apr '14

10 Apr '14

Hello, I am using kamailio-3.1 with siremis. I want to ask some questions about the exported params of usrloc module defined in the link given below. http://kamailio.org/docs/modules/3.1.x/modules_k/usrloc.html#id2997066 1. These exported params export value to whom ?? Other params or siremis location table ?? 2. If any export param is not defined in kamailio.cfg. Does its default value considered automatically or it is not used at all ?? 3. In siremis location table, I am not able to show my domain name of selected online user when I click on user. I want to do it. User's contact, received and other columns are filled but not domain name :( Shall I dig deep into usrloc module or I need to follow some other path to resolve this issue ?? Thanks, Regards, Aawaise -- View this message in context: http://sip-router.1086192.n5.nabble.com/Exported-params-of-USRLOC-module-tp… Sent from the Users mailing list archive at Nabble.com.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users