sr-users

sr-users@lists.kamailio.org

39 participants
37513 discussions

Htable question
by Stefan-Cristian Mititelu 09 Aug '23

09 Aug '23

Hello, Can one kama process iterate a htable using sht_iterator_start(), sht_iterator_next(), sht_iterator_rm(), sht_iterator_end() while some other kama process call sht_rm(htable, item) ? I've looked into code and to me it looks like slots are locked ok. The entire linked list(specific to a slot) where the item might be, is locked, so this means there should be no problems, right? Thank you, Stefan

1 0

problem relay re-INVITE
by beer Ll 09 Aug '23

09 Aug '23

Hi I have a kamailio 5.7.1 running as TLS gateway for PBXs in private LAN network: UAC-WAN(sip-tls) <--> kamailio-WAN(sip-tls) - kamailio-LAN(sip) <--> PBX-LAN(sip) 80.0.0.1 <--> 80.0.0.2 - 10.0.0.1 <--> 10.0.0.2 All communications tested works well except for re-INVITE like when UAC put the call on hold . The re-INVITE packet is managed like a new call and the tm module doesn't match transaction : matching_3261(): RFC3261 transaction matching failed - via branch [z9hG4bK-524287-1---5e900485d5ad0faf] t_lookup_request(): no transaction found build_cell(): created new cell t_relay_to(): new INVITE I try to send the interesting logs and config call logs and pcap : https://filebin.net/vdezuhyn7wdy3lqc kamailio config : ... request_route { if (is_method("CANCEL")) { if (t_check_trans()) { route(RELAY); } exit; } if (!is_method("ACK")) { if(t_precheck_trans()) { t_check_trans(); exit; } t_check_trans(); } route(WITHINDLG); if ($si=="PBXIP0" || $si=="PBXIP1" || $si=="PBXIP2" || $si=="PBXIP3" ) { if (!loose_route()) { switch($rc) { case -2: sl_send_reply("403", "Forbidden"); exit; } } remove_hf("Route"); force_rport(); record_route(); $fs = "tls:WANIP:5061"; } if (is_method("INVITE|SUBSCRIBE")){ record_route(); } t_on_failure("MANAGE_FAILURE"); $fs = "udp:LANIP:5060"; } route(RELAY); exit; } route[WITHINDLG] { if (!has_totag()) return; if ($si=="PBXIP0" || $si=="PBXIP1" || $si=="PBXIP2" || $si=="PBXIP3") { route(RTPMANAGE); route(RELAY); exit; } if (loose_route()) { if ( is_method("NOTIFY") ) { record_route(); } route(RTPMANAGE); route(RELAY); exit; } if ( is_method("ACK|BYE") ) { route(RTPMANAGE); route(RELAY); } sl_send_reply("404","Not here"); exit; } How can I solve this ? Best Regards Leo

1 0

No
by Sergey Safarov 09 Aug '23

09 Aug '23

I catched issue with In the Kamailio logs i see ssl bug #1491 workaround: not enough memory for safe operation: shm=10219080 threshold2=11796480 Current stat about shared memory [root@sbc-a1 ~]# kamctl stats shmem { "jsonrpc": "2.0", "result": [ "shmem:fragments = 528", "shmem:free_size = 11343104", "shmem:max_used_size = 124449952", "shmem:real_used_size = 122874624", "shmem:total_size = 134217728", "shmem:used_size = 58728144" ], "id": 703182 } But when kamailio started [root@sbc-a1 ~]# kamctl stats shmem { "jsonrpc": "2.0", "result": [ "shmem:fragments = 122", "shmem:free_size = 112534264", "shmem:max_used_size = 22372528", "shmem:real_used_size = 21683464", "shmem:total_size = 134217728", "shmem:used_size = 12833888" ], "id": 703670 } What is stange a lot of fragments. How it can be troubleshooted? Can memory manager show info about each fragment like when fragment are created an and which module requested fragment?

2 3

Problem connecting to Redis DB using DB_REDIS module with a Password
by Nick Digalakis 08 Aug '23

08 Aug '23

Hello everyone! I had a Kamailio 5.6.4 server using the DB_REDIS module for quite some time without a password on the Redis DB working just fine. A few days ago I decided to add a password to Redis and modify the Kamailio config file with the following line per the documentation to be able to authenticate: modparam("db_redis", "db_pass", "r3d1sPass") Since that moment, I see the following errors in the Kamailio logs: ...... kamailio: ERROR: <core> [core/modparam.c:175]: set_mod_param_regex(): parameter <db_pass> of type <1:string> not found in module <db_redis> kamailio: CRITICAL: <core> [core/cfg.y:3790]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 556, column 49: Can't set module parameter ...... The documentation I am reading is here: https://www.kamailio.org/docs/modules/devel/modules/db_redis.html#db_redis.… Could someone help me figure out what I am doing wrong? Many thanks, Nick

2 2

pua_json mwi minimal json
by David VILLAUME 08 Aug '23

08 Aug '23

Hello, On 5.6.4, i’m trying to perform mwi pua_json, but cannot get it working. I have a doubt about my json and spent some time to make variations on json without success. Does one of you played with it and can tell me if something is wrong about this json ? { "Event-Package":"message-summary", "Event-Name":"update" "expires":3600, "From":sip:ccoca@dff.com, "To":sip:ccoca@dff.com, "Message-Account":sip:ccoca@dff.com, "Messages-Waiting":"yes", "MWI-Voice-Message":"2/8 (0/0)", "Messages-New":"2", "Messages-Saved":"8", "Messages-Urgent":"0", "Messages-Urgent-Saved":"0", "From-Realm":"dff.com", "From-User":"ccoca", "Call-ID":0_845806535@10.22.22.22<mailto:0_845806535@10.22.22.22>, } Regards, David

3 3

Subscribers and peers handling
by Kiss Zoltán 08 Aug '23

08 Aug '23

Hello, We are trying to build a lightweight SBC solution for some external peers, but currently there is a mixed environment which is handled by Asterisk. We have some "peers" with IP based auth, and also some "subscribers" with register. We have succeded with the subscribers, because we can handle the numbers for those type of users with aliases in Kamailio. So basically we have a subscriber, lets call it "test", and we can add aliases for the subscriber like "3612345678@localhost", then if we are calling the number the routing goes to the contact of "test" subscriber. Currently the problem is that we dont have any idea about the IP based peers, because those peers not registering, so we cannot create aliases for them as far as i know. How do you solve this type of problem? Maybe im overcomplicating the situation, but i havent got any solutions in my mind currently. Thanks for your help and ideas. With kind regards, Zoltan

1 0

Connection to AWS services (e.g DynamoDB)
by Lewis Hutchinson 07 Aug '23

07 Aug '23

Hi Jakub Although no direct experience with this exactly as you have described I have used HTTP API out of Kamailio quite a bit and into other services. Which yes some ultimatly end in AWS> Having done our's in KEMI there is some difference however from our experience we did notice some of this didn't fair well under a loads test scenario. We tested Kafka vs Kamailio HTTP API Modules vs Aiohttp (Python in Kemi) and Kafka significantly out perfomed in terms of the load test. We then had to rejig things to account for this instead of HTTP API. If this is ever going to be under intense load. Maybe make sure you do the load testing early on before you ratify your design. Also make sure all your error habndling is in place and working to prevent issues in Kamailio if something API side goes wrong. Mission Labs Limited is registered in England, company number 10040088. Trading Office: The Old Milk Depot, Bacup Rd, Rossendale, BB4 7FE. Registered office: The Scalpel, 18th Floor 52 Lime Street, London, EC3M 7AF. Email confidentiality notice: This message is private and confidential. If you have received this message in error, please notify us and remove it from your system. Please consider the environment before you print this email.

1 0

Setting up rtpengine to relay RTP
by Alvaro Escobar 05 Aug '23

05 Aug '23

Hello I have debian 11 with kamailio 5.6.4 (x86_64/linux). The kamailio is working fine. Now I need to setup rtprngine to relay RTP. I have installed the rtpengine using this guide: https://dfx.at/rtpengine/ Version: 10.5.4.3-1+b1 When I run: systemctl status rtpengine-daemon I got: ● rtpengine-daemon.service - RTP/media Proxy Daemon Loaded: loaded (/lib/systemd/system/rtpengine-daemon.service; enabled; vendor preset: enabled) Active: active (running) since Tue 2023-08-01 20:58:23 -05; 51min ago Docs: man:rtpengine(8) Process: 468 ExecStartPre=/usr/sbin/rtpengine-iptables-setup start (code=exited, status=0/SUCCESS) Main PID: 535 (rtpengine) Tasks: 22 (limit: 2323) Memory: 42.1M CPU: 720ms CGroup: /system.slice/rtpengine-daemon.service └─535 /usr/bin/rtpengine -f -E --no-log-timestamps --pidfile /run/rtpengine/rtpengine-daemon.pid --config-file /etc/rtpengine/rtpengine.conf Aug 01 20:58:22 debian systemd[1]: Starting RTP/media Proxy Daemon... Aug 01 20:58:23 debian rtpengine[535]: INFO: [crypto] Generating new DTLS certificate Aug 01 20:58:23 debian rtpengine[535]: INFO: [core] Startup complete, version 10.5.4.3-1+b1 Aug 01 20:58:23 debian systemd[1]: Started RTP/media Proxy Daemon. Aug 01 20:58:23 debian rtpengine[535]: INFO: [http] Websocket listener thread running I edited /etc/kamailio/kamailo.cfg with: #!define WITH_RTPENGINE #!ifdef WITH_RTPENGINE loadmodule "rtpengine.so" modparam("rtpengine", "rtpengine_sock", "udp:127.0.0.1:2223") systemctl restart kamilio To check if the rtpengine module is running: kamcmd core.modules I got: permissions auth_db auth counters acc cfg_rpc ctl sanity xlog siputils textopsx textops registrar usrloc maxfwd pv rr sl tmx tm corex kex jsonrpcs db_mysql The point is that I don't see the rtpengine module. There is another way to check if the rtpengine module is running ? Regards

2 2

Connection to AWS services (e.g DynamoDB)
by jakub.smadis＠cloudtalk.io 04 Aug '23

04 Aug '23

Hello, I am researching how I could communicate from Kamailio (which runs on an AWS EC2 instance) with AWS services (e.g. DynamoDB) using HTTP API. My Kamailio logic is written in Kamailio configuration files. I would like to ask you if anyone has some experience with such a setup and if so how did you manage to connect it? My current options are: * HTTP connection to DynamoDB API with HTTP module I would create a Python script that would generate signature headers for the [AWS API request](https://docs.aws.amazon.com/IAM/latest/UserGuide/create-signed-req…. Then I would use the headers in the HTTP request. (I am using the Kamailio module to keep the connection open to DynamoDB). * Middleman service Small service that provides HTTP API to Kamailio and manages the communication with DynamoDB. Easiest solution but it's harder to maintain it in high availability mode. * API gateway with VPC endpoint attached to the EC2 API gateway would be a proxy to DynamoDB and we would call the VPC endpoint from the Kamailio. We would use resource policies to allow requests without auth through the VPC endpoint. Any help or feedback would be valuable to me. Thank you very much! Regards, Jakub

1 0

change A number using a pool of numbers
by Ali Taher 03 Aug '23

03 Aug '23

Hello, I'm looking to change the A number (from number) to a number selected randomly from a pool of existing numbers (hundreds) and then relay the call to a certain gateway. What is the best and more efficient way to do it in kamailio? Thanks in advance

2 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users