sr-users

sr-users@lists.kamailio.org

4 participants
37456 discussions

Start a nNew thread

Re: uac_replace_to() without RR params
by Duarte Rocha 08 Sep '23

08 Sep '23

2 1

Question about a Slow timer process.
by Володимир Іванець 07 Sep '23

07 Sep '23

Hello everyone! I'm running Kamailio 5.6.2 and having a potential problem on one of the systems. The Slow timer process slowly consumes more and more of its PKG memory. I did not allow it to use all memory by restartink Kamailio during afterhours so I'm not sure what the consequences might be. I'm suspecting that this could be caused by my configuration but not sure how exactly. Can anyone please tell me how the Slow timer process can be debugged? Is it possible to see what it is storing in the memory and what data is piling up? Thanks a lot! Regarts, Volodymyr Ivanets.

1 0

uac_replace_to() without RR params
by Duarte Rocha 07 Sep '23

07 Sep '23

Hello all, I'm currently working on a proxy where I need to change To and From headers in order to normalize the numbers to +E164. I would like to be able to restore using and $avp() or $dlg_var() and without writing parameters on the Record-Route headers. I've tried to use restore_mode in auto mode and restore_dlg parameter with value 1 but still got the parameters on the inserted Record-Route. I've tried manual mode and using the configured $avp() to restore, but the parameters still got written on the Request-URI. I thought of using restore_mode with value "none" saving original values in an $avvp() and doing the replace, however, uac_replace() on Request Route or branch routes. That way i can't replace the values of To and From in the replies. That being said, my questions are : - Is there a way to use manual or auto mode without writing info on the Record-Route and only using $avp() ? - Is there a way to make changes on the To and From header on replies? Thanks in advance, Best Regards, Duarte Rocha

1 0

[Proposal] To add tlsa module to the package builder
by Denys Pozniak 07 Sep '23

07 Sep '23

Hello! Are there any technical difficulties in adding tlsa module with the statically linked OpenSSL v1.1.1 to the package builder (deb)? -- BR, Denys Pozniak

1 0

Unnecessary/Invalid AVPs in CCR message over Ro Interface
by s.ghahremannejad＠gmail.com 06 Sep '23

06 Sep '23

**Issue Description** I'm encountering an issue with my Kamailio configuration related to the inclusion of the "Accounting-Record-Type" (480) and "Accounting-Record-Number" (485) AVPs in Credit-Control Request (CCR) messages sent from the S-CSCF to the OCS. **Issue Details** - **Problem**: The "Accounting-Record-Type" and "Accounting-Record-Number" AVPs are being added to CCR messages generated by my Kamailio instance. - **Expected Behavior**: According to modern Diameter and 3GPP standards (e.g., RFC 4006 and TS 32.299), these AVPs should not be included in CCR messages. **Configuration Details** - **Kamailio Version**: 5.3.0 - **SigScale OCS Version**: 3.2.9 Note that I have redacted some specific information for confidentiality reasons. The actual values are placed in my Kamailio main configuration file (`kamailio.cfg`) and Diameter-specific configuration files (where applicable). Kamailio.cfg: modparam("ims_charging", "db_url", DB_URL) modparam("ims_charging", "db_mode", 1) modparam("ims_charging", "origin_host", HOSTNAME); modparam("ims_charging", "origin_realm", NETWORKNAME); modparam("ims_charging", "destination_host", DESTINATION_HOST); modparam("ims_charging", "destination_realm", DESTINATION_REALM); modparam("ims_charging","service_context_id_root", RO_ROOT); modparam("ims_charging","service_context_id_ext", RO_EXT); modparam("ims_charging","service_context_id_mnc", MNC); modparam("ims_charging","service_context_id_mcc", MCC); modparam("ims_charging","interim_update_credits",30); modparam("ims_charging","timer_buffer",5); SCSCF.xml: <?xml version="1.0" encoding="UTF-8"?> <DiameterPeer FQDN="scscf.mncXXX.mccXXX.3gppnetwork.org" Realm="ims.mncXXX.mccXXX.3gppnetwork.org" Vendor_Id="10415" Product_Name="CDiameterPeer" AcceptUnknownPeers="1" DropUnknownOnDisconnect="1" Tc="30" Workers="16" QueueLength="32" TransactionTimeout="5" SessionsHashSize="128" DefaultAuthSessionTimeout="3600" MaxAuthSessionTimeout="3600" > <Peer FQDN="diameter" Realm="ims.mncXXX.mccXXX.3gppnetwork.org" port="3868"/> <Peer FQDN="192.168.2.31" Realm="ocs.ims.mncXXX.mccXXX.3gppnetwork.org" port="3868"/> <Acceptor port="3868" bind="eth0"/> <Auth id="16777216" vendor="10415"/> <Auth id="16777216" vendor="4491"/> <Auth id="16777216" vendor="13019"/> <Auth id="16777216" vendor="0"/> <Auth id="4" vendor="10415"/>  <Acct id="4" vendor="10415" />  <SupportedVendor vendor="10415" /> <Realm name="ocs.ims.mncXXX.mccXXX.3gppnetwork.org"> <Route FQDN="192.168.2.31" metric="10"/> </Realm> <DefaultRoute FQDN="diameter" metric="10"/> </DiameterPeer> I am using SigScale OCS as my Online Charging System. Here is the error log I received from SigScale OCS: ERROR REPORT==== 5-Sep-2023::07:27:01.393554 === "DIAMETER AVP unsupported" service_name: {ocs_diameter_acct_service,{0,0,0,0},3868} capabilities: {diameter_caps, {<<"host1">>, <<"scscf-1.ims.mncXXX.mccXXX.3gppnetwork.org">>}, {<<"COMPANYNAME.local">>, <<"ims.mncXXX.mccXXX.3gppnetwork.org">>}, {[{0,0,0,0}],[{172,18,0,7}]}, {50386,10415}, {<<"SigScale OCS">>,<<"CDiameterPeer">>}, {[],[]}, {[10415],[10415]}, {[4,16777238],[16777216]}, {[],[]}, {[],[]}, {[{'diameter_base_Vendor-Specific-Application-Id',10415,[16777238],[]}], [{'diameter_base_Vendor-Specific-Application-Id',10415,[16777216],[]}, {'diameter_base_Vendor-Specific-Application-Id',4491,[16777216],[]}, {'diameter_base_Vendor-Specific-Application-Id',13019,[16777216],[]}, {'diameter_base_Vendor-Specific-Application-Id',10415,[4],[]}, {'diameter_base_Vendor-Specific-Application-Id',10415,[],[4]}]}, {[329],[]}, {[],[]}} errors: [{5001, {diameter_avp,480,undefined,true,false, <<0,0,0,2>>, 'Accounting-Record-Type',2,'Enumerated',5}}, {5001, {diameter_avp,485,undefined,true,false, <<0,0,0,0>>, 'Accounting-Record-Number',0,'Unsigned32',6}}, {5001, {diameter_avp,260,undefined,true,false, <<0,0,1,10,64,0,0,12,0,0,40,175,0,0,1,2,64,0,0,12,0,0,0,4>>, 'Vendor-Specific-Application-Id', {'3gpp_ro_Vendor-Specific-Application-Id',10415,[4],[]}, 'Grouped',10}}] I would greatly appreciate it if someone from the community could provide insights into the following: 1. Possible Configurations: Are there specific configurations or modules in Kamailio that might cause the inclusion of non-standard AVPs in CCR messages? 2. IMS Ro Interface Behavior: Does anyone have experience with IMS Ro interface behavior using Kamailio that could shed light on this? If you have any guidance, suggestions, or solutions to help me troubleshoot and resolve this problem, please share them. Thank you for your assistance.

2 1

kamcmd reload is slow or blocking additional reloads
by Martin Nyström 06 Sep '23

06 Sep '23

Hello, Running ”kamcmd permissions.trustedReload” it instantly returns “Reload OK” but I cannot repeat the reload for about 8 seconds. This is the same for dialplan.reload and dispatcher.reload. root@superman.local:/# kamcmd permissions.trustedReload Reload OK root@superman.local:/# kamcmd permissions.trustedReload error: 500 - ongoing reload root@superman.local:/# kamcmd permissions.trustedReload error: 500 - ongoing reload There are scenarios where I might need to reload the permission table multiple times within this 8 second window. Is this some kind of intended block or is something at fault? modparam("db_mysql", "ping_interval", 60) modparam("db_mysql", "timeout_interval", 4) modparam("db_mysql", "auto_reconnect", 1) modparam("db_mysql", "opt_ssl_mode", 0) modparam("permissions", "db_url", "mysql://kamailio:xxxxx@aws-rds-database /kamailio") version: kamailio 5.7.1 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 10.2.1 /M

4 6

关于acc_cdr的问题，请教一下
by bikq＠163.com 05 Sep '23

05 Sep '23

目前进行一通呼叫后，在acc表中可以看到Invite、ack及bye的记录详情并带有时间，acc_cdrs表中只有start_time及end_time,是对应invite和bye的。现在我想在acc_cdrs中增加ack的时间我该如何去做呢？有没有大佬能解答一下？万分感谢！！！

1 0

Configuring package memory
by Ivan Ribakov 05 Sep '23

05 Sep '23

Is there any specific reason why shared memory can be configured via the config files ("shm_mem_size") AND CLI flags ("-m") but package memory can only be set via CLI flags ("-M")? Did no one ever came across the need to configure the package memory limit so far, or is there another way to achieve it without using the CLI flag? -- Ivan Ribakov Software Engineer www.zaleos.net

3 2

Re: Kamailio stops processing UDP on one interface
by Ihor Olkhovskyi 31 Aug '23

31 Aug '23

Bastian, According to mine stats all seems ok... # kamctl stats shmem { "jsonrpc": "2.0", "result": [ "shmem:fragments = 330", "shmem:free_size = 1889418024", "shmem:max_used_size = 258962624", "shmem:real_used_size = 258065624", "shmem:total_size = 2147483648", "shmem:used_size = 248809096" ], "id": 212042 } pkg.stats also not showing any signs of exhausting. For me what is working is server can send packets, but not receive em back even. And it's happening only on 1 interface. Le 30/08/2023 à 21:44, Bastian Triller a écrit : > I'm asking, because we kind of observed similar behaviour after > overload. We've did some load testing and at some point SHM was > exhausted and that didn't recover itself. One process was using nearly > 100% CPU. And I guess that at least sl replies still works at that point. > > On Wed, Aug 30, 2023 at 9:28 PM Ihor Olkhovskyi > <igorolhovskiy(a)gmail.com> wrote: > > Bastian, > > I'm fine with retransmissions and so, but for me it's really > interesting, that server is not restoring it's state after a while > and only restart helps. And this is happening only with UDP on one > interface, others are working fine over UDP > > Le 30/08/2023 à 17:19, Bastian Triller a écrit : >> Maybe it's not beneficial to have a receive buffer that high. If >> your presence server is stateful, it will send retransmissions if >> packets get dropped. But it will also send retransmissions if >> your proxy does not reply fast enough. So your proxy may be >> damped by retransmissions. Did you check SHM/active transactions >> on your proxy? >> >> Regards, >> Bastian >> >> On Wed, Aug 30, 2023 at 3:56 PM Ihor Olkhovskyi >> <igorolhovskiy(a)gmail.com> wrote: >> >> They are increasing, actually >> >> # ss -l -u -m src X.X.X.X/Y >> State Recv-Q Send-Q Local >> Address:Port Peer Address:Port >> UNCONN 25167616 0 X.X.X.X:sip *:* >> skmem:(r25167616,rb25165824,t0,tb65536,f2304,w0,o0,bl0,d514894) >> >> Le mer. 30 août 2023 à 15:04, Bastian Triller >> <bastian.triller(a)gmail.com> a écrit : >> >> Are drops increasing on that socket while it is happening? >> ss -l src <local_interface> -u sport 5060 -m >> >> On Tue, Aug 29, 2023 at 3:26 PM Ihor Olkhovskyi >> <igorolhovskiy(a)gmail.com> wrote: >> >> Just to add some info >> >> netstat -nlp >> Active Internet connections (only servers) >> Proto Recv-Q Send-Q Local Address Foreign Address >> State PID/Program name >> ... >> udp 25167616 0 <local_interface>:5060 >> 0.0.0.0:* 211759/kamailio >> ... >> >> So I see a huge Receive Queue on UDP for Kamailio >> which is not clearing. >> >> Le mar. 29 août 2023 à 14:29, Ihor Olkhovskyi >> <igorolhovskiy(a)gmail.com> a écrit : >> >> Hello, >> >> I've faced a bit strange issue, but a bit of >> preface. I have Kamailio as a proxy (TLS/WS <-> >> UDP) and second Kamailio as a presence server. At >> some point presence server accepts around 5K >> PUBLISH within 1 minute and sending around the >> same amount of NOTIFY to proxy Kamailio. >> >> Proxy is "transforming" protocol to TLS, but at >> sime point I'm starting to get these type of errors >> >> tm [../../core/forward.h:292]: msg_send_buffer(): >> tcp_send failed >> tm [t_fwd.c:1588]: t_send_branch(): sending >> request on branch 0 failed >> <script>: [RELAY] Relay to >> <sip:X.X.X.X:51571;transport=tls> failed! >> tm [../../core/forward.h:292]: msg_send_buffer(): >> tcp_send failed >> tm [t_fwd.c:1588]: t_send_branch(): sending >> request on branch 0 failed >> >> Some of those messages are 100% valid as client >> can go away or so. Some are not, cause I'm sure >> client is alive and connected. >> >> But the problem comes later. At some moment proxy >> Kamailio just stops accept UDP traffic on this >> interface (where it also accepts all NOTIFY's), >> at the start of the "stopping accepting" Kamailio >> sends OPTIONS via DISPATCHER but not able to >> receive 200 OK. >> >> Over TLS on the same interface all is ok. On >> other (loopback) interface UDP is being processed >> fine, so I don't suspert some limit on open files >> here. >> >> Only restart of Kamailio proxy process helps in >> this case. >> >> I've tuned net.core.rmem_max and >> net.core.rmem_default to 25 Mb, so in theory >> buffer should not be the case. >> >> Is there some internal "interface buffer" in >> Kamailio that is not freed upon failure send or >> maybe I've missed somethig? >> >> Kamailio 5.6.4 >> >> fork=yes >> children=12 >> tcp_children=12 >> >> enable_tls=yes >> >> tcp_accept_no_cl=yes >> tcp_max_connections=63536 >> tls_max_connections=63536 >> tcp_accept_aliases=no >> tcp_async=yes >> tcp_connect_timeout=10 >> tcp_conn_wq_max=63536 >> tcp_crlf_ping=yes >> tcp_delayed_ack=yes >> tcp_fd_cache=yes >> tcp_keepalive=yes >> tcp_keepcnt=3 >> tcp_keepidle=30 >> tcp_keepintvl=10 >> tcp_linger2=30 >> tcp_rd_buf_size=80000 >> tcp_send_timeout=10 >> tcp_wq_blk_size=2100 >> tcp_wq_max=10485760 >> open_files_limit=63536 >> >> Sysctl >> >> # To increase the amount of memory available for >> socket input/output queues >> net.ipv4.tcp_rmem = 4096 25165824 25165824 >> net.core.rmem_max = 25165824 >> net.core.rmem_default = 25165824 >> net.ipv4.tcp_wmem = 4096 65536 25165824 >> net.core.wmem_max = 25165824 >> net.core.wmem_default = 65536 >> net.core.optmem_max = 25165824 >> >> # To limit the maximum number of requests queued >> to a listen socket >> net.core.somaxconn = 128 >> >> # Tells TCP to instead make decisions that would >> prefer lower latency. >> net.ipv4.tcp_low_latency=1 >> >> # Optional (it will increase performance) >> net.core.netdev_max_backlog = 1000 >> net.ipv4.tcp_max_syn_backlog = 128 >> >> # Flush the routing table to make changes happen >> instantly. >> net.ipv4.route.flush=1 >> -- >> Best regards, >> Ihor (Igor) >> >> >> >> -- >> Best regards, >> Ihor (Igor) >> __________________________________________________________ >> Kamailio - Users Mailing List - Non Commercial >> Discussions >> To unsubscribe send an email to >> sr-users-leave(a)lists.kamailio.org >> Important: keep the mailing list in the recipients, >> do not reply only to the sender! >> Edit mailing list options or unsubscribe: >> >> __________________________________________________________ >> Kamailio - Users Mailing List - Non Commercial Discussions >> To unsubscribe send an email to >> sr-users-leave(a)lists.kamailio.org >> Important: keep the mailing list in the recipients, do >> not reply only to the sender! >> Edit mailing list options or unsubscribe: >> >> >> >> -- >> Best regards, >> Ihor (Igor) >> __________________________________________________________ >> Kamailio - Users Mailing List - Non Commercial Discussions >> To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org >> Important: keep the mailing list in the recipients, do not >> reply only to the sender! >> Edit mailing list options or unsubscribe: >> >> >> __________________________________________________________ >> Kamailio - Users Mailing List - Non Commercial Discussions >> To unsubscribe send an email tosr-users-leave(a)lists.kamailio.org >> Important: keep the mailing list in the recipients, do not reply only to the sender! >> Edit mailing list options or unsubscribe: >

1 0

Install Kamailio 5.3
by Daniel Oliveira Hilário 30 Aug '23

30 Aug '23

Hi people, I installed Kamailio 5.3 on Ubuntu Server 22 LTS, but I am not able to resolve several PHP errors that occur when I try to open the website http://localhost/siremis/. Which Linux distro and version is best suited for installation? Is Kamailio version 5.3 operational or is it better to use version 4.4? Att., Daniel Hilário INFRACOM/UFRGS 51 3308 4801

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users