sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

ims_charging state machine issue
by 4fba81+8i7felu07050＠guerrillamail.com 30 Sep '16

30 Sep '16

Wanted to ask about changing rates while a call is not yet connected. I did this, $var(cc_ret1) = Ro_CCR_Stop("term", "487", "Request Terminated"); $var(cc_ret2) = Ro_CCR("RO_REPLY", "term", 30, "1", "1"); however, upon sending the new CCR, i get this ERROR: cdp [acctstatemachine.c:185]: cc_acc_client_stateful_sm_process(): Received unknown event [1] in state [1] and CRITICAL: ims_charging [ro_timer.c:122]: insert_ro_timer(): Trying to insert a bogus ro tl=0x7f484ab48728 tl->next=0x7f484ab42858 tl->prev=0x7f484aaa1090 looks like there is some statemachine issue. question is, how do we change rate? ---- Sent using GuerrillaMail.com Block or report abuse: https://www.guerrillamail.com/abuse/?a=UlM5EB4FUac1hAen5G1RYR3XANifx8NV1epN…

1 0

Identical Kamailio setup on 2 hosts
by Infinicalls Infinicalls 30 Sep '16

30 Sep '16

Hi, I have two identical hosts running Kamailio with the same set of users. They are located in different locations. Both are running behind NAT and I've enabled rtpproxy for that and also advertised the public IP. Both the MySQL DBs are similar and have the same data. Both the hosts have different sub-domains in alias and I have set auto_alias=no Now, the problem is my users are not able to communicate from one server to another. user1(a)mydomain.com from host1 is not able to communicate to user1(a)mydomain.com at host2, though inter-server communication is happening nicely. Any idea how to solve this? Thanks. regards Ganesh Kumar -- --- http://www.infinicalls.com

3 8

Load balancing traffic with Kamailio
by Nitesh Bansal 29 Sep '16

29 Sep '16

Hello, I'm planning on doing some smart load balancing with Kamailio. We have a distributed network, with multiple Kamailio boxes in different locations serving as Ingress SBC, these Kamailio boxes are the entry point for a SIP call and then they route the call to a pre-configured Asterisk boxes. I want to move away from this, I would like these Kamailios to be able to distribute the traffic to Asterisk boxes based on the performance of the Asterisk ,it would be great if we could take a look at SIP response time from Asterisk and use that as metric for load balancing the traffic) Is there any Kamailio module which could do that? Do I need to integrate some other tool with Kamailio to achieve this? Any suggestions are welcome. -- *Nitesh Bansal* Business Development Engineer http://www.voxbone.com/

3 3

Re: [SR-Users] Distributed Message Queue Module
by Charles Chance 29 Sep '16

29 Sep '16

Hello, That depends entirely on what you need to replicate between servers. DMQ is just a communication channel. How you use it is up to you. For example, if you enable dmq_usrloc, there's no need to share a location database. Htable has an option for replicating over dmq too. The number of direct module integrations like dmq_usrloc/htable is fairly limited, but you can also share arbitrary data between nodes yourself from within your config. I think you'll need to provide a little more information about what you're trying to achieve, however, in order for us to offer any further advice. Cheers, Charles On 29 Sep 2016 08:08, "Moacir Ferreira" <moacirferreira(a)hotmail.com> wrote: Hi, When using the DMQueue module what is the best approach, using one SQL server/database for each member node or having a single SQL server for all nodes? Thanks, Moacir _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Sipcentric Ltd. Company registered in England & Wales no. 7365592. Registered office: Faraday Wharf, Innovation Birmingham Campus, Holt Street, Birmingham Science Park, Birmingham B7 4BB.

1 0

Distributed Message Queue Module
by Moacir Ferreira 28 Sep '16

28 Sep '16

Hi, When using the DMQueue module what is the best approach, using one SQL server/database for each member node or having a single SQL server for all nodes? Thanks, Moacir

1 0

memory problem
by beer Ll 28 Sep '16

28 Sep '16

hi all I have kamailio 4.2.0 on Debian Jessie the parameters on startup of kamailio are : SHM_MEMORY=512 PKG_MEMORY=32 the server is dedicated to the kamailio SIP service with authentication and accounting on a separated db server the server process about 30/50 call setups per second everythings works good but after 5/6 days the processes lock and I received a lot of error log like these: <core> [rvalue.c:1710]: rval_str_add2(): rv eval out of memory <core> [msg_translator.c:362]: received_builder(): out of memory <core> [msg_translator.c:2717]: via_builder(): out of memory ... <core> [msg_translator.c:2423]: build_res_buf_from_sip_req(): out of memory; needs 514 ... <core> [data_lump.c:172]: insert_new_lump_before(): out of memory acc [acc_extra.c:267]: extra2strar(): extra2strar: out of memory. after a kamailio reboot evrethings works again for 5/6 days. what can I do to resolve?

3 3

RPC tcp limit buffer
by pars3c 28 Sep '16

28 Sep '16

Hello, i'm trying to list the dialog (dlg_profile list) in the proxy using an RPC call to jsonrpc-s (dlg_profile list). But when there are many calls , kamailio send an error because the tcp buffer is not big enough. The only solution is to increase the parameter tcp_conn_wq_max every time i've an error ? Thanks

2 2

Accessing cached database table
by Daniel W. Graham 28 Sep '16

28 Sep '16

Is there a way to access a cached database table from the config file, without using a function from a module? Example - Lookup ip_addr from 'address' table or src_ip from 'trusted' table based on the 'tag' column. No function exists in permissions module to do this, but running 'kamctl address show ' or 'kamctl trusted show ', show that the tables along with tag column are cached. Thanks! -Dan

2 2

invalid sendtoparameters
by Linux Vince 27 Sep '16

27 Sep '16

I am getting this error on every outgoing request. Below are log entries i found Sep 27 22:09:06 centos1 /usr/sbin/kamailio[22421]: ERROR: <core> [udp_server.c:550]: udp_send(): sendto(sock,0x7fb76f5da5e0,1568,0, 10.3.4.2:5060,16): Invalid argument(22) Sep 27 22:09:06 centos1 /usr/sbin/kamailio[22421]: CRITICAL: <core> [udp_server.c:555]: udp_send(): invalid sendtoparameters#012one possible reason is the server is bound to localhost and#012attempts to send to the net Sep 27 22:09:06 centos1 /usr/sbin/kamailio[22421]: ERROR: <core> [forward.h:201]: msg_send_buffer(): udp_send failed SNDTO values are SNDTO ,10.3.4.2 PORT 5060 I have confirmed the PID and it is bound to my public IP 22417 main process - attendant 22418 udp receiver child=0 sock=10.3.4.1:5060 22419 udp receiver child=1 sock=10.3.4.1:5060 22420 udp receiver child=2 sock=10.3.4.1:5060 22421 udp receiver child=3 sock=10.3.4.1:5060 22422 udp receiver child=4 sock=10.3.4.1:5060 22423 udp receiver child=5 sock=10.3.4.1:5060 22424 udp receiver child=6 sock=10.3.4.1:5060 22425 udp receiver child=7 sock=10.3.4.1:5060 22426 udp receiver child=0 sock=127.0.0.1:5060 22427 udp receiver child=1 sock=127.0.0.1:5060 22428 udp receiver child=2 sock=127.0.0.1:5060 22429 udp receiver child=3 sock=127.0.0.1:5060 22430 udp receiver child=4 sock=127.0.0.1:5060 22431 udp receiver child=5 sock=127.0.0.1:5060 22432 udp receiver child=6 sock=127.0.0.1:5060 22433 udp receiver child=7 sock=127.0.0.1:5060 22434 slow timer 22435 timer 22436 secondary timer 22437 ctl handler 22438 MI FIFO 22439 WEBSOCKET KEEPALIVE 22440 tcp receiver (generic) child=0 22441 tcp receiver (generic) child=1 22442 tcp receiver (generic) child=2 22443 tcp receiver (generic) child=3 22444 tcp receiver (generic) child=4 22445 tcp receiver (generic) child=5 22446 tcp receiver (generic) child=6 22447 tcp receiver (generic) child=7 22448 tcp main process How do i identify the issue ?

1 1

SIREMIS MANUAL
by Carlyle Edwards 27 Sep '16

27 Sep '16

Hi, is there a manual for SIREMIS?

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users