sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

DROUTING Tables
by Annus Fictus 08 Jun '17

08 Jun '17

Hello, I can't find DROUTING Tables on the standard kamailio database. dr_gateways dr_rules dr_groups Have I to create them manually? Thank you Regards

3 3

KAMAILIO STARTUP ERROR
by christopher kamutumwa 08 Jun '17

08 Jun '17

hello all, I am new to kamailio on centos 7 and i have finished installation following steps below; http://computingforgeeks.com/how-to-install-latest-kamailio-sip-server-on-c… but when i try to startup service i get fail with below how can this be resolved? [root@li1496-213 ~]# systemctl status kamailio.service -l ● kamailio.service - SYSV: Kamailio is a fast, reliable and flexible SIP Server. Loaded: loaded (/etc/rc.d/init.d/kamailio; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Wed 2017-06-07 12:16:26 UTC; 1min 59s ago Docs: man:systemd-sysv-generator(8) Process: 26015 ExecStart=/etc/rc.d/init.d/kamailio start (code=exited, status=1/FAILURE) Jun 07 12:16:26 li1496-213.members.linode.com kamailio[26015]: 0(26023) ERROR: <core> [core/cfg.y:3264]: yyparse(): cfg. parser: failed to find command handle_publish (params 0) Jun 07 12:16:26 li1496-213.members.linode.com kamailio[26015]: 0(26023) CRITICAL: <core> [core/cfg.y:3404]: yyerror_at(): parse error in config file //etc/kamailio/kamailio.cfg, line 715, column 18: unknown command, missing loadmodule? Jun 07 12:16:26 li1496-213.members.linode.com kamailio[26015]: 0(26023) ERROR: <core> [core/cfg.y:3264]: yyparse(): cfg. parser: failed to find command handle_subscribe (params 0) Jun 07 12:16:26 li1496-213.members.linode.com kamailio[26015]: 0(26023) CRITICAL: <core> [core/cfg.y:3404]: yyerror_at(): parse error in config file //etc/kamailio/kamailio.cfg, line 718, column 20: unknown command, missing loadmodule? Jun 07 12:16:26 li1496-213.members.linode.com kamailio[26015]: ERROR: bad config file (7 errors) Jun 07 12:16:26 li1496-213.members.linode.com kamailio[26015]: 0(26023) INFO: <core> [core/sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized Jun 07 12:16:26 li1496-213.members.linode.com systemd[1]: kamailio.service: control process exited, code=exited status=1 Jun 07 12:16:26 li1496-213.members.linode.com systemd[1]: Failed to start SYSV: Kamailio is a fast, reliable and flexible SIP Server.. Jun 07 12:16:26 li1496-213.members.linode.com systemd[1]: Unit kamailio.service entered failed state. Jun 07 12:16:26 li1496-213.members.linode.com systemd[1]: kamailio.service failed. regards chris

2 2

Docs: database structure
by Daniel-Constantin Mierla 07 Jun '17

07 Jun '17

Hello, I regenerated recently the document with the details for Kamailio's database structure, it is available at: * https://kamailio.org/docs/db-tables/kamailio-db-devel.html If you haven't read it so far, it is a good source to understand the purpose of the fields needed by kamailio from database. Contributions to the document are more than appreciated! You can update the xml files from src/lib/srdb1/schema/ and then make a pull request via github. Cheers, Daniel -- Daniel-Constantin Mierla www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - www.asipto.com Kamailio World Conference - www.kamailioworld.com

1 0

No private memory left
by Vuk Radovanovic 07 Jun '17

07 Jun '17

Hello, I am having trouble with userblacklist module. I am using mysql db, when globalblacklist table is empty or has couple of records kamailio loads fine. When I populate the table with cca 50k entries I get an error no private memory error as pasted below. I have edited both the init.d script and /etc/default cfg file to to have 1GB pkg and 2 GB SHM memory with no change. Init script change: SHM_MEMORY=2048 PKG_MEMORY=1024 Init script output. Jun 07 01:03:45 km systemd[1]: Starting Kamailio SIP Server... Jun 07 01:03:45 km kamctl[1377]: ** INFO: Starting Kamailio : Jun 07 01:03:46 km /usr/local/sbin/kamailio[1405]: ERROR: <core> [db_row.c:114]: db_allocate_row(): no private memory left Jun 07 01:03:46 km /usr/local/sbin/kamailio[1405]: ERROR: db_mysql [km_row.c:57]: db_mysql_convert_row(): could not allocate row Jun 07 01:03:46 km /usr/local/sbin/kamailio[1405]: ERROR: db_mysql [km_res.c:188]: db_mysql_convert_rows(): error while converting row #41249 Jun 07 01:03:46 km /usr/local/sbin/kamailio[1405]: ERROR: db_mysql [km_res.c:217]: db_mysql_convert_result(): error while converting rows Jun 07 01:03:46 km /usr/local/sbin/kamailio[1405]: ERROR: db_mysql [km_dbase.c:261]: db_mysql_store_result(): error while converting result Jun 07 01:03:46 km /usr/local/sbin/kamailio[1405]: ERROR: <core> [db_query.c:139]: db_do_query_internal(): error while storing result Jun 07 01:03:46 km /usr/local/sbin/kamailio[1405]: ERROR: userblacklist [db.c:129]: db_reload_source(): error while executing query on db table 'globalblacklist' Jun 07 01:03:46 km /usr/local/sbin/kamailio[1405]: ERROR: userblacklist [userblacklist.c:610]: reload_sources(): cannot reload source from 'globalblacklist' Jun 07 01:03:46 km /usr/local/sbin/kamailio[1405]: ERROR: <core> [core/sr_module.c:923]: init_mod_child(): Error while initializing module userblacklist (/usr/local/lib64/kamailio/modules/userblacklist.so) Jun 07 01:03:46 km /usr/local/sbin/kamailio[1405]: ERROR: <core> [core/pt.c:330]: fork_process(): init_child failed for process 1, pid 1405, "udp receiver child=0 sock=127.0.0.1:5060" Jun 07 01:03:46 km /usr/local/sbin/kamailio[1405]: CRITICAL: <core> [main.c:1606]: main_loop(): Cannot fork Jun 07 01:03:46 km /usr/local/sbin/kamailio[1403]: ALERT: <core> [main.c:741]: handle_sigs(): child process 1405 exited normally, status=255 Jun 07 01:03:48 km kamctl[1377]: ** ERROR: PID file /var/run/kamailio.pid does not exist -- Kamailio start failed Jun 07 01:03:48 km systemd[1]: kamailio.service: control process exited, code=exited status=1 Jun 07 01:03:48 km systemd[1]: Failed to start Kamailio SIP Server. Jun 07 01:03:48 km systemd[1]: Unit kamailio.service entered failed state. Regards, Vuk

2 4

Dispatcher - postponed GW restoration
by Ivan Matvieiev 07 Jun '17

07 Jun '17

Hello I'm trying to implement following scenario: - remote GW is Active (receives calls) and not Probed (no SIP Options are being sent); - in case if remote GW failes, it starts to be Probed and become Inactive ("ds_probing_threshold" does this); - when remote GW returns it remains in Probed and Inactive state for a while; - after probing for some amount of time (or a number of successful responses) it become Active and not Pobed (it can be achieved with "ds_inactive_threshold"); The issue I'm facing is that "ds_inactive_threshold" will bring GW back only after the number of successful responses that can't be provided using "ds_probing_mode" with value 2. It stops to produce SIP Options by successful reply before threshold of successful replies is reached. In case of "ds_probing_mode" with value 3 I haven't found a way to stop Probing when GW transits to state Active. Is there a way to make GW Active after it was Inactive and was successfully probed for arbitrary number of times? Some valuable information: Kamailio: v 4.4.2 ... modparam("dispatcher", "ds_ping_interval", 3) modparam("dispatcher", "ds_probing_threshold", 3) modparam("dispatcher", "ds_inactive_threshold", 60) modparam("dispatcher", "ds_probing_mode", 2) ... If I missed any information please tell me. With best regards Ivan

1 0

TLS to UDP translation
by 赵国杰 07 Jun '17

07 Jun '17

Hi everyone, I have a kamailio server with TLS enabled. I need to forword UAC request to a PSTN gateway which only support UDP. Is it possible that kamailio can translate this with proper configuration? How can i do this? many thanks Jesse

2 5

Using reserved keywords in cfg variables
by Paul Claudiu Boriga 07 Jun '17

07 Jun '17

Hello all, We found out that when using cfg variables certain keywords are not allowed, and Kamailio logs a generic error: <core> [cfg.y:3368]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 256, column 9-14: syntax error For example we cannot use words like enable/disable for var name or group name but we can use disabled or enabled: group_name.enable = 1 descr "test variable" Looking into the cfg.lex file, I noticed that these are keywords which will be interpreted as values (I don't have too much experience with flex/bison so I am not sure I got this right). We have been using Kamailio 4.4 to test this, but I think it is not specific to a version. Is this behavior documented somewhere? If not, where should it be documented? Also can we have a more specific log message in this case? Thank you, Claudiu Boriga.

2 6

Issue with Dispatcher Failover algorithm
by Cristi Constantin 07 Jun '17

07 Jun '17

Hello, I have an issue with the behavior of ds_select_dst() method in case of using algorithm 8 (dispatch based on priority). In case both destinations are available, they are used alternatively, instead of always using the one with the highest priority. By searching through the mailing list I found that the lower the priority number, the higher the priority (1 is first, 2 is second, etc.). Based on this, I set the following in dispatcher.list: 7 sip:10.126.54.51:5060;transport=sctp 9 1 7 sip:10.126.55.51:5060;transport=sctp 9 2 After running "kamcmd dispatcher.reload" and "kamcmd dispatcher.list", I have the confirmation that the priorities are correctly set: SET: { ID: 7 TARGETS: { DEST: { URI: sip:10.126.55.51:5060 ;transport=sctp FLAGS: AP PRIORITY: 2 } DEST: { URI: sip:10.126.54.51:5060 ;transport=sctp FLAGS: AP PRIORITY: 1 } } } The dispatcher settings from kamailio.cfg is the following: modparam("dispatcher", "list_file", "/etc/kamailio/dispatcher.list") modparam("dispatcher", "flags", 2) modparam("dispatcher", "ds_ping_interval", 10) modparam("dispatcher", "ds_ping_method", "OPTIONS") modparam("dispatcher", "ds_ping_from", "sip:kamailio@sdp-t-lb2") modparam("dispatcher", "ds_probing_mode", 3) modparam("dispatcher", "dst_avp", "$avp(AVP_DST)") modparam("dispatcher", "grp_avp", "$avp(AVP_GRP)") modparam("dispatcher", "cnt_avp", "$avp(AVP_CNT)") modparam("dispatcher", "sock_avp", "$avp(AVP_SOCK)") And the code which should do the displatch is the following: if (ds_is_from_list(7, 3, "$ru")) { remove_hf("Route"); if(!ds_select_dst("7", "8")) { send_reply("404", "No destination"); exit; } } With the settings above, I was expecting to always have the messages delivered to 10.126.54.51. Instead, they are dispathed to 10.126.54.51 and 10.126.55.51 alternatively. Thanks a lot, Cristian

6 15

Kamailio / Docker
by sain hassam caicedo 07 Jun '17

07 Jun '17

Dear Kamailio, My name is Sain, I from Colombia. I wonder if is possible to use Kamailio with Docker in Ubuntu 16 ? Also, respectfully do you have an easy installation manual or any recommendation to start doing some testing? I am interesting to learn more about Kamailio . Thank you very much

2 1

Auth_radius - digest auth problem
by Donat Zenichev 06 Jun '17

06 Jun '17

Hi all. Have a problem with radius authorization. I'm using auth_radius.so modparams, only path to client file: modparam("auth_radius", "radius_config", "/etc/radiusclient/radiusclient.conf") Freeradius installed and is working properly, radtest authentication from kamailio host succeed . How authorization block looks like: if (!is_present_hf("Authorization")) { xlog("L_NOTICE", "----- Athorization HF is not found - passing the challenge -----\n"); if (nat_uac_test("2")) { force_rport(); } www_challenge("$fd", "1"); exit; if (!radius_www_authorize("$fd","$fU")) { if (nat_uac_test("2")) { force_rport(); } xlog("L_NOTICE", "----- Registeration $au@$ar ($fU) from $si:$sp Rejected. Code: $rc -----\n"); sl_send_reply("401","Unauthorized"); exit; Radius log is filled by rows like: Auth: [digest] Cleartext-Password or Digest-HA1 is required for authentication. Tried to use radius_www_authorize without $fU - didn't change anything. Tried to use www_challenge without qop - didn't change anything. So, this solution is quite simple, but I have a fail while digest authentication. Any ideas? -- -- BR, Donat Zenichev Wnet VoIP team Tel: +380(44) 5-900-808 http://wnet.ua

4 8

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users