sr-users

sr-users@lists.kamailio.org

19 participants
37571 discussions

[Serusers] Problem with accounting
by Alejandro Sanchez 18 Apr '06

18 Apr '06

Hi. My problem is. In the detail fail only apear Start records but the stop records dosen't, i red in the documentation the necesary of drive the transaction in stateful mode but i don't understand very well how can i set up to SER in stateful mode, i think when finish the call the method BYE don't send de stop accounting to freeradius. Anybody knows something about this. I use: SER 0.9.6 freeradius 1.1.1 Mysql 5 Thank's Alex. ___________________________________________________________ Do You Yahoo!? La mejor conexión a Internet y <b >2GB</b> extra a tu correo por $100 al mes. http://net.yahoo.com.mx

1 0

[Users] can do SerWeb with openser...
by raviprakash sunkara 18 Apr '06

18 Apr '06

Hi Everybody, I Installed OPENSER-1.0.1 from CVS. Now I want to Work on SERWEB with OPENSER. How can I change the config.php file in serweb to reflect the openser. Can U help me in this regarding. please its very important and urgent for me. Thanks Sunkara Ravi Prakash Hyperion Techologies.

3 2

[Serusers] nat support and listening on two port
by Francesco Castellano 18 Apr '06

18 Apr '06

Hi all, I would like to setup a SER (as registrar and call router) listening on two port of the same interface, say 5060 and 5062. In order to manage NATed clients, I have to set a flag different for those client from 5060 and for those from 5062: that's ok. When SER gets an INVITE for a NATed client registered on port 5062, SER should use that port, delivering the SIP message to the called party. Is there a way to t_relay() using a particular port among those SER is listening on? Any suggestions? Thanks Francesco

1 0

[Users] call forwarding problem
by Jayesh Nambiar 18 Apr '06

18 Apr '06

Hi all, I was enabling features like call forwarding and voicemail in my openser script. I also took some idea from the call forward configuration available at Onsip.org. But I find a strange problem: When the user has set his call forwarding to forwarding on no answer and if someone calls this user it rings for the request timeout period but after request timeout the invite goes again to the same user instead of the forwarded number and the phone keeps on ringing. Then I jus used the onsip.org configuration and again I face the same problem. Can someone help me on this please. I remember that this script worked well in the 0.9.5 version of openser but now I am using 1.1.x from the cvs and I am facing this problem. The problem somewhere seems to be with the append_branch function. I inserted the log function at different places in the script to check the flow, it behaves as needed but after the append_branch() I dont know what goes wrong but the call is not forwarded somehow. The blind forwarding concept works fine as it does not need any append_branch() in it. The ngrep after request timeout happens is given below: 202.XXX.60.XXX:5060 -> 202.80.XXX.XXX:1443 CANCEL sip:6468621545@192.168.2.18:8469 SIP/2.0..Via: SIP/2.0/UDP 202.XXX.60.XXX;branch=z9hG4bK39ec.b7193062.0..From: "jaye sh"<sip:6468621547@202.XXX.60.XXX>;tag=1b0d5617..Call-ID: 83236e2f50004a44@SkFZRVNI..To: <sip:6468621545@202.XXX.60.XXX>..CSe q: 2 CANCEL..User-Agent: OpenSer (1.1.0-dev16 -notls (i386/linux))..Content-Length: 0.... # U 202.XXX.60.XXX:5060 -> 202.80.XXX.XXX:2650 SIP/2.0 407 Proxy Authentication Required..Via: SIP/2.0/UDP 192.168.2.18:8466;received=202.80.XXX.XXX;branch=z9hG4bK-d8754 3-c63a9f56aa2b013d-1--d87543-;rport=2650..To: <sip:6468621545@202.XXX.60.XXX>;tag=71ff39c351286642530928b88b3f93ba.d71b..Fr om: "jayesh"<sip:6468621547@202.XXX.60.XXX>;tag=1b0d5617..Call-ID: 83236e2f50004a44@SkFZRVNI..CSeq: 2 INVITE..Proxy-Authent icate: Digest realm="202.XXX.60.XXX", nonce="4444ecd2d1559130637b185152e48a75efecca04"..Server: OpenSer (1.1.0-dev16 -notls (i386/linux))..Content-Length: 0..Warning: 392 202.XXX.60.XXX:5060 "Noisy feedback tells: pid=11598 req_src_ip=202.80.61. 10 req_src_port=5060 in_uri=sip:00919833171405@202.XXX.60.XXX out_uri=sip:00919833171405@202.XXX.60.XXX via_cnt==2".... # U 202.80.XXX.XXX:2650 -> 202.XXX.60.XXX:5060 ACK sip:6468621545@202.XXX.60.XXX SIP/2.0..Via: SIP/2.0/UDP 192.168.2.18:8466;branch=z9hG4bK-d87543-c63a9f56aa2b013d-1--d87 543-;rport..To: <sip:6468621545@202.XXX.60.XXX>;tag=71ff39c351286642530928b88b3f93ba.d71b..From: "jayesh"<sip:6468621547@20 2.80.61.10>;tag=1b0d5617..Call-ID: 83236e2f50004a44@SkFZRVNI..CSeq: 2 ACK..Content-Length: 0.... # U 202.80.XXX.XXX:2650 -> 202.XXX.60.XXX:5060 INVITE sip:6468621545@202.XXX.60.XXX SIP/2.0..Via: SIP/2.0/UDP 192.168.2.18:8466;branch=z9hG4bK-d87543-1b1c6b50b550ef43-1-- d87543-;rport..Max-Forwards: 70..Contact: <sip:6468621547@192.168.2.18:8466>..To: <sip:6468621545@202.XXX.60.XXX>..From: "jayesh"<sip:6468621547@202.XXX.60.XXX>;tag=1b0d5617..Call-ID: 83236e2f50004a44@SkFZRVNI..CSeq: 3 INVITE..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..Content-Type: application/sdp..Proxy-Authorization: Diges t username="6468621547",realm="202.XXX.60.XXX",nonce="4444ecd2d1559130637b185152e48a75efecca04",uri="sip:6468621545@202.80. 61.10",response="752c0923d00e9a7a4a8611835ea0c649",algorithm=MD5..Supported: eventlist..User-Agent: eyeBeam release 3010n stamp 19039..Content-Length: 235....v=0..o=- 18498030 18498049 IN IP4 192.168.2.18..s=eyeBeam..c=IN IP4 192.168.2.18..t= 0 0..m=audio 8470 RTP/AVP 8 18 5 101..a=alt:1 1 : 3E35CA80 000000D3 192.168.2.18 8470..a=fmtp:101 0-15..a=rtpmap:101 tele phone-event/8000..a=sendrecv.. # U 202.XXX.60.XXX:5060 -> 202.80.XXX.XXX:2650 SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP 192.168.2.18:8466;branch=z9hG4bK-d87543-1b1c6b50b550 ef43-1--d87543-;rport=2650;received=202.80.XXX.XXX..To: <sip:6468621545@202.XXX.60.XXX>..From: "jayesh"<sip:6468621547@202.8 0.61.10>;tag=1b0d5617..Call-ID: 83236e2f50004a44@SkFZRVNI..CSeq: 3 INVITE..Server: OpenSer (1.1.0-dev16 -notls (i386/linu x))..Content-Length: 0..Warning: 392 202.XXX.60.XXX:5060 "Noisy feedback tells: pid=11594 req_src_ip=202.80.XXX.XXX req_src _port=2650 in_uri=sip:6468621545@202.XXX.60.XXX out_uri=sip:6468621545@192.168.2.18:8469 via_cnt==1".... # U 202.XXX.60.XXX:5060 -> 202.80.XXX.XXX:1443 INVITE sip:6468621545@192.168.2.18:8469 SIP/2.0..Record-Route: <sip:202.XXX.60.XXX:5060;nat=yes;ftag=1b0d5617;lr=on>..Via: SIP/2.0/UDP 202.XXX.60.XXX;branch=z9hG4bK49ec.e5a8534.0..Via: SIP/2.0/UDP 192.168.2.18:8466;received=202.80.XXX.XXX;branch=z 9hG4bK-d87543-1b1c6b50b550ef43-1--d87543-;rport=2650..Max-Forwards: 69..Contact: <sip:6468621547@202.80.XXX.XXX:2650>..To: <sip:6468621545@202.XXX.60.XXX>..From: "jayesh"<sip:6468621547@202.XXX.60.XXX>;tag=1b0d5617..Call-ID: 83236e2f50004a44@SkFZR VNI..CSeq: 3 INVITE..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..Content-Type: app lication/sdp..Supported: eventlist..User-Agent: eyeBeam release 3010n stamp 19039..Content-Length: 236....v=0..o=- 184980 30 18498049 IN IP4 192.168.2.18..s=eyeBeam..c=IN IP4 202.XXX.60.XXX..t=0 0..m=audio 10108 RTP/AVP 8 18 5 101..a=alt:1 1 : 3 E35CA80 000000D3 192.168.2.18 8470..a=fmtp:101 0-15..a=rtpmap:101 telephone-event/8000..a=sendrecv.. # U 202.80.XXX.XXX:1443 -> 202.XXX.60.XXX:5060 SIP/2.0 200 OK..Via: SIP/2.0/UDP 202.XXX.60.XXX;branch=z9hG4bK39ec.b7193062.0..Contact: <sip:6468621545@192.168.2.18:8469>. .To: <sip:6468621545@202.XXX.60.XXX>;tag=023e0170..From: "jayesh"<sip:6468621547@202.XXX.60.XXX>;tag=1b0d5617..Call-ID: 83236 e2f50004a44@SkFZRVNI..CSeq: 2 CANCEL..User-Agent: eyeBeam release 3010n stamp 19039..Content-Length: 0.... # U 202.80.XXX.XXX:1443 -> 202.XXX.60.XXX:5060 SIP/2.0 487 Request Terminated..Via: SIP/2.0/UDP 202.XXX.60.XXX;branch=z9hG4bK39ec.b7193062.0..Via: SIP/2.0/UDP 192.168.2.1 8:8466;received=202.80.XXX.XXX;branch=z9hG4bK-d87543-c63a9f56aa2b013d-1--d87543-;rport=2650..To: <sip:6468621545@202.80.61 .10>;tag=023e0170..From: "jayesh"<sip:6468621547@202.XXX.60.XXX>;tag=1b0d5617..Call-ID: 83236e2f50004a44@SkFZRVNI..CSeq: 2 INVITE..User-Agent: eyeBeam release 3010n stamp 19039..Content-Length: 0.... # U 202.XXX.60.XXX:5060 -> 202.80.XXX.XXX:1443 ACK sip:6468621545@192.168.2.18:8469 SIP/2.0..Via: SIP/2.0/UDP 202.XXX.60.XXX;branch=z9hG4bK39ec.b7193062.0..From: "jayesh" <sip:6468621547@202.XXX.60.XXX>;tag=1b0d5617..Call-ID: 83236e2f50004a44@SkFZRVNI..To: <sip:6468621545@202.XXX.60.XXX>;tag=023 e0170..CSeq: 2 ACK..User-Agent: OpenSer (1.1.0-dev16 -notls (i386/linux))..Content-Length: 0.... # U 202.80.XXX.XXX:1443 -> 202.XXX.60.XXX:5060 SIP/2.0 180 Ringing..Via: SIP/2.0/UDP 202.XXX.60.XXX;branch=z9hG4bK49ec.e5a8534.0..Via: SIP/2.0/UDP 192.168.2.18:8466;recei ved=202.80.XXX.XXX;branch=z9hG4bK-d87543-1b1c6b50b550ef43-1--d87543-;rport=2650..Record-Route: <sip:202.XXX.60.XXX:5060;lr;n at=yes;ftag=1b0d5617>..Contact: <sip:6468621545@192.168.2.18:8469>..To: <sip:6468621545@202.XXX.60.XXX>;tag=f6570b78..From: "jayesh"<sip:6468621547@202.XXX.60.XXX>;tag=1b0d5617..Call-ID: 83236e2f50004a44@SkFZRVNI..CSeq: 3 INVITE..User-Agent: eyeB eam release 3010n stamp 19039..Content-Length: 0.... # U 202.XXX.60.XXX:5060 -> 202.80.XXX.XXX:2650 SIP/2.0 180 Ringing..Via: SIP/2.0/UDP 192.168.2.18:8466;received=202.80.XXX.XXX;branch=z9hG4bK-d87543-1b1c6b50b550ef43-1-- d87543-;rport=2650..Record-Route: <sip:202.XXX.60.XXX:5060;lr;nat=yes;ftag=1b0d5617>..Contact: <sip:6468621545@202.80.61.25 4:1443>..To: <sip:6468621545@202.XXX.60.XXX>;tag=f6570b78..From: "jayesh"<sip:6468621547@202.XXX.60.XXX>;tag=1b0d5617..Call-I D: 83236e2f50004a44@SkFZRVNI..CSeq: 3 INVITE..User-Agent: eyeBeam release 3010n stamp 19039..Content-Length: 0.... The one that I have made bold is the forwarded number. It recognises but it somehow again asks for proxy authentication after the call is forwarded. User 6468621545 has forwarded the call on no answer to 00919833171405. Please help me in this regard as many must have used that script. w/regards, jayesh. --------------------------------- Jiyo cricket on Yahoo! India cricket Yahoo! Messenger Mobile Stay in touch with your buddies all the time. --------------------------------- Jiyo cricket on Yahoo! India cricket Yahoo! Messenger Mobile Stay in touch with your buddies all the time.

1 0

[Serusers] Authentication Problem with registerd users....
by fay butt 18 Apr '06

18 Apr '06

Hi, I am using SER.cfg file with the following configuration for the registerd users, if (method=="REGISTER" & proxy_authorize("localhost" , "subscriber")) { if (!check_to()) { log(1, "LOG: unregistered user registration attempt\n"); sl_send_reply("403", "Only registered users are allowed"); break; }; }; but it does not work and i gets this error, Stopping ser: [FAILED] Starting ser: 0(7109) loading module /usr/lib/ser/modules/mysql.so 0(7109) loading module /usr/lib/ser/modules/sl.so 0(7109) loading module /usr/lib/ser/modules/tm.so 0(7109) loading module /usr/lib/ser/modules/rr.so 0(7109) loading module /usr/lib/ser/modules/maxfwd.so 0(7109) loading module /usr/lib/ser/modules/usrloc.so 0(7109) loading module /usr/lib/ser/modules/registrar.so 0(7109) loading module /usr/lib/ser/modules/auth.so 0(7109) loading module /usr/lib/ser/modules/auth_db.so 0(7109) loading module /usr/lib/ser/modules/acc.so 0(7109) loading module /usr/lib/ser/modules/exec.so 0(7109) loading module /usr/lib/ser/modules/group.so 0(7109) loading module /usr/lib/ser/modules/print.so 0(7109) loading module /usr/lib/ser/modules/textops.so 0(7109) set_mod_param_regex: usrloc matches module usrloc 0(7109) set_mod_param_regex: found <db_mode> in module usrloc [/usr/lib/ser/modules/usrloc.so] 0(7109) set_mod_param_regex: usrloc matches module usrloc 0(7109) set_mod_param_regex: found <db_url> in module usrloc [/usr/lib/ser/modules/usrloc.so] 0(7109) set_mod_param_regex: auth_db matches module auth_db 0(7109) set_mod_param_regex: found <calculate_ha1> in module auth_db [/usr/lib/ser/modules/auth_db.so] 0(7109) set_mod_param_regex: auth_db matches module auth_db 0(7109) set_mod_param_regex: found <password_column> in module auth_db [/usr/lib/ser/modules/auth_db.so] 0(7109) set_mod_param_regex: rr matches module rr 0(7109) set_mod_param_regex: found <enable_full_lr> in module rr [/usr/lib/ser/modules/rr.so] 0(7109) find_export: found <mf_process_maxfwd_header> in module maxfwd_module [/usr/lib/ser/modules/maxfwd.so] 0(7109) find_export: found <sl_send_reply> in module sl_module [/usr/lib/ser/modules/sl.so] 0(7109) find_export: found <sl_send_reply> in module sl_module [/usr/lib/ser/modules/sl.so] 0(7109) find_export: found <record_route> in module rr [/usr/lib/ser/modules/rr.so] 0(7109) find_export: found <loose_route> in module rr [/usr/lib/ser/modules/rr.so] 0(7109) find_export: found <t_relay> in module tm [/usr/lib/ser/modules/tm.so] 0(7109) find_export: found <search> in module textops [/usr/lib/ser/modules/textops.so] 0(7109) find_export: found <sl_send_reply> in module sl_module [/usr/lib/ser/modules/sl.so] 0(7109) find_export: found <sl_send_reply> in module sl_module [/usr/lib/ser/modules/sl.so] 0(7109) find_export: found <www_authorize> in module auth_db [/usr/lib/ser/modules/auth_db.so] 0(7109) find_export: found <www_challenge> in module auth [/usr/lib/ser/modules/auth.so] 0(7109) find_export: found <save> in module registrar [/usr/lib/ser/modules/registrar.so] 0(7109) find_export: found <proxy_authorize> in module auth_db [/usr/lib/ser/modules/auth_db.so] 0(7109) find_export: <check_to> not found 0(7109) find_export: <check_to> not found 0(7109) parse error (139,21-22): unknown command, missing loadmodule? 0(7109) find_export: found <sl_send_reply> in module sl_module [/usr/lib/ser/modules/sl.so] 0(7109) find_export: found <lookup> in module registrar [/usr/lib/ser/modules/registrar.so] 0(7109) find_export: found <sl_send_reply> in module sl_module [/usr/lib/ser/modules/sl.so] 0(7109) find_export: found <t_relay> in module tm [/usr/lib/ser/modules/tm.so] 0(7109) find_export: found <sl_reply_error> in module sl_module [/usr/lib/ser/modules/sl.so] ERROR: bad config file (1 errors) 0(7109) DEBUG: tm_shutdown : start 0(7109) DEBUG: tm_shutdown : empting hash table 0(7109) DEBUG: tm_shutdown: releasing timers 0(7109) DEBUG: tm_shutdown : removing semaphores 0(7109) DEBUG: tm_shutdown : done 0(7109) shm_mem_destroy 0(7109) destroying the shared memory lock [FAILED] can any body help me in this matter, Best Regards --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

2 1

RE: [Serusers] Call Forward and Billing.
by Ricardo Martinez 18 Apr '06

18 Apr '06

Somone on this topic ? Thanks! Ricardo.- > -----Mensaje original----- > De: Ricardo Martinez [mailto:rmartinez@redvoiss.net] > Enviado el: Jueves, 13 de Abril de 2006 18:00 > Para: 'serusers(a)lists.iptel.org' > Asunto: [Serusers] Call Forward and Billing. > > > Hello list. > It is been a while since i wrote here, that's ok, it > means that my > SER box is working flawless. :) > Well, if is not to much problem i want to ask a > question about the > Diversion module and how the Forward procedure works. > > Suppose that i want to implement a Blind Call Forward > system, that > works catching the First INVITE and then changing the R-URI for the > forwarded number, like the "getting started" doc from onsip. > Something > like this example : > > INVITE sip:bob@sip.org SIP/2.0 > Via: SIP/2.0/UDP 1.2.3.4:5060 > From: "mark" <sip:mark@sip.org>;tag=ldgheoihege > To: "Bob" <sip:bob@sip.org> > Call-ID: adgasdkgjhkjha(a)1.2.3.4 > CSeq: 3 INVITE > Contact: <sip:mark@1.2.3.4> > Content-Length: 0 > > The INVITE message is diverted and the new destination is > sip:alice@sip.org > : > > INVITE sip:alice@sip.org SIP/2.0 > Via: SIP/2.0/UDP 5.6.7.8:5060 > Via: SIP/2.0/UDP 1.2.3.4:5060 > From: "mark" <sip:mark@sip.org>;tag=ldgheoihege > To: "Bob" <sip:bob@sip.org> > Call-ID: adgasdkgjhkjha(a)1.2.3.4 > CSeq: 3 INVITE > Diversion: <sip:bob@sip.org>;reason=user-busy > Contact: <sip:mark@1.2.3.4> > Content-Length: 0 > > How this new INVITE is reflected in the Start and Stop message for the > accounting ??. How the "divertor" is billed ? > Hope that someone can clarify this. > > Thanks in advance > > Ricardo Martinez > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Users] avpops-Flags
by Andreas Granig 18 Apr '06

18 Apr '06

Hi, What's the meaning of the flags in avp_copy()? There's no description available at http://www.openser.org/docs/modules/1.1.x/avpops.html#AEN387 g - copy all src_avps matching the name? d - delete src_avp after copy? n - ? s - ? Thanks, Andy

2 1

[Serusers] TLS...first steps
by samuel 18 Apr '06

18 Apr '06

Hi folks!! Finally I had time to test the new TLS module and faced lots of problems...probably due to my lack of security knowledge. If somebody can point me few links where I can gain some knowledge I'll appreciate it.. The problem: I create the cert,key and ca-list using the scripts present in openser's TLS module. I am using the latest CVS version and SER does not start giving the next error: ERROR: tls/tls_domain.c:200: TLSc<default>: Unable to load certificate file '/usr/local/etc/ser/certs/user-cert.pem' ERROR: tls/tls_domain.c:201: load_cert:error:0906D06C:PEM routines:PEM_read_bio:no start line Probably I did something wrong in the key creation or configure something wrong in ser.cfg....The config is taken from a thread present in serdev about the status of the SER TLS module and it's really simple so I don't think it's wrong but anyway, here it is: loadmodule "/usr/local/lib/ser/modules/tls.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/xmlrpc.so" listen=tls:a.b.c.d:5061 listen=tcp:a.b.c.d:5060 listen=udp:a.b.c.d:5060 alias=mydomain.com #modparam("tls", "tls_method", "TLSv1") modparam("tls", "tls_method", "SSLv23") modparam("tls", "verify_certificate", 1) modparam("tls", "require_certificate", 0) modparam("tls", "private_key", "/usr/local/etc/ser/certs/user-privkey.pem") modparam("tls", "certificate", "/usr/local/etc/ser/certs/user-cert.pem") modparam("tls", "ca_list", "/usr/local/etc/ser/certs/user-calist.pem") #modparam("tls", "config", "tls.cfg") route { if (proto == TLS && (method == "POST" || method == "GET")) { create_via(); # XMLRPC requests do not contain via, create it if (!(a)tls.peer.verified) { # Client did not provide certificate or it is not valid xmlrpc_reply("400", "Unauthorized"); break; } if (@xmlrpc.method == "core.kill") { # Make sure the client has the permission to execute the command if (@tls.peer != "SER-Killer") { xmlrpc_reply("400", "Access to core.kill denied"); break; } } dispatch_rpc(); break; } } Any comments are highly appreciated, thanks! Samuel.

3 13

[Serusers] Out-of-office-reply: Serusers Digest, Vol 36, Issue 17
by David.Monahan＠aepona.com 18 Apr '06

18 Apr '06

I'll be out of the office until Thursday 20th April. For urgent queries please contact Alan Taylor.

1 0

[Users] mhome problem
by Raymond Chen 18 Apr '06

18 Apr '06

Dear all we have a server setup with 2 ethernets, we use mhome=1 and wanted to send the message back to which ethernet it comes in, but doesn't seem to work. Did we misunderstood the mhome command? or just a configuration issue? thanks Ray

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users