sr-users

sr-users@lists.kamailio.org

9 participants
37568 discussions

[Serusers] nat - mediaproxy problem only about patton hardware
by Rosario Pingaro 23 Apr '06

23 Apr '06

We are test nat conditions. We have a ser.cfg configured about mediaproxy and everything works fine in the following configuration: 1. natted sip client (all kind of client) to pstn gateway. GOOD 2. natted sip client (sipura) to natted sip client (all kind of client). GOOD I have only the problem form patton (4552) natted to natted sip client. In this case the i have NO audio streaming. For exemple if call from sipura natted client to patton natted client everything is OK. This is the dispatcher log: Apr 23 15:18:01 voip1 proxydispatcher[2526]: command request de241b08-640f38fd(a)192.168.0.9 192.168.0.9:12058:audio 83.211.248.158 voip.convergenze.it local 192.168.0.3 remote Sipura/SPA2100-3.2.5(d) info=from:0681140017@voip.convergenze.it,to:08281962101@voip.convergenze.it,fromtag:928f2b8c6099c249o1,totag: Apr 23 15:18:01 voip1 proxydispatcher[2526]: forwarding to mediaproxy on voicegw1.convergenze.it:25060: got: '194.247.167.90 35662' Apr 23 15:18:01 voip1 proxydispatcher[2526]: command execution time: 208.19 ms Apr 23 15:18:09 voip1 proxydispatcher[2526]: command lookup de241b08-640f38fd(a)192.168.0.9 192.168.0.3:4960:audio 83.211.248.158 voip.convergenze.it local voip.convergenze.it unknown Patton=20SN4552=202BIS=20EUI=20MxSF=20v3.2.8.45=2000a0ba0149b5 info=from:0681140017@voip.convergenze.it,to:08281962101@voip.convergenze.it,fromtag:928f2b8c6099c249o1,totag:c86e8fae20c094f Apr 23 15:18:09 voip1 proxydispatcher[2526]: forwarding to mediaproxy on voicegw1.convergenze.it:25060: got: '194.247.167.90 35662' Apr 23 15:18:09 voip1 proxydispatcher[2526]: command execution time: 105.27 ms Apr 23 15:18:21 voip1 proxydispatcher[2526]: command delete de241b08-640f38fd(a)192.168.0.9 info= Apr 23 15:18:21 voip1 proxydispatcher[2526]: forwarding to mediaproxy on voicegw1.convergenze.it:25060: got: '' Apr 23 15:18:21 voip1 proxydispatcher[2526]: command execution time: 97.82 ms If the same patton is making the call i got the problem about no media streaming. This is the dispatcher log in this seocnd xase: Apr 23 15:20:53 voip1 proxydispatcher[2526]: command request f80cfcdf1483c972ff7a14ebce972d7c(a)voip.convergenze.it 192.168.0.3:4964:audio,192.168.0.3:4966:image 83.211.248.158 voip.convergenze.it local 192.168.0.3 remote Patton=20SN4552=202BIS=20EUI=20MxSF=20v3.2.8.45=2000a0ba0149b5 info=from:08281962101@voip.convergenze.it,to:800987787@voip.convergenze.it,fromtag:ec7de0fd9378643,totag: Apr 23 15:20:53 voip1 proxydispatcher[2526]: forwarding to mediaproxy on voicegw1.convergenze.it:25060: got: '194.247.167.90 35664 35666' Apr 23 15:20:53 voip1 proxydispatcher[2526]: command execution time: 215.59 ms Apr 23 15:21:03 voip1 proxydispatcher[2526]: command lookup f80cfcdf1483c972ff7a14ebce972d7c(a)voip.convergenze.it 192.168.0.9:12062:audio 83.211.248.158 voip.convergenze.it local voip.convergenze.it unknown Sipura/SPA2100-3.2.5(d) info=from:08281962101@voip.convergenze.it,to:800987787@voip.convergenze.it,fromtag:ec7de0fd9378643,totag:592f7200dfc751c9i1 Apr 23 15:21:03 voip1 proxydispatcher[2526]: forwarding to mediaproxy on voicegw1.convergenze.it:25060: got: '194.247.167.90 35664 35666' Apr 23 15:21:03 voip1 proxydispatcher[2526]: command execution time: 106.28 ms Apr 23 15:21:17 voip1 proxydispatcher[2526]: command delete f80cfcdf1483c972ff7a14ebce972d7c(a)voip.convergenze.it info= Apr 23 15:21:17 voip1 proxydispatcher[2526]: forwarding to mediaproxy on voicegw1.convergenze.it:25060: got: '' Apr 23 15:21:17 voip1 proxydispatcher[2526]: command execution time: 105.77 ms The main difference is that patton try to send image stream also. But i am not able to figure out what is the main problem preventing mediaproxy (1.4.2) to work correctly. Regards Rosario

1 0

[Users] Installing Open Ser Fedora Core 4
by openser＠comcast.net 23 Apr '06

23 Apr '06

Hi, I'm installing Openser on a Fedora Core 4 on my local machine, I got pass the point where you remove mysql from the string from the exclude_moudule. When type in make all, I get the following errors [root@localhost sip-server]# make all /bin/sh: gcc: command not found /bin/sh: gcc: command not found /bin/sh: gcc: command not found Makefile.defs:243: Unknown compiler gcc; supported compilers: gcc, sun cc, intel icc Makefile.defs:517: You are using an old and unsupported gcc version (unknown), compile at your own risk! bison -d -b cfg cfg.y make: bison: Command not found make: *** [cfg.tab.c] Error 127 Any ideas how to fix it. Thanks.

2 1

[Serusers] One Way Audio Issue
by Junaid Saeed Uppal 23 Apr '06

23 Apr '06

Hello There, I have the following setup Remote Incoming call on sip -> my asterisk at port 5060 -> my ser at port 8701 -> softphone registered on ser Now when the call comes in , the caller can hear the soft phone very easily and without any issue but the soft phone guy cannot hear the caller at all. I've done a debug of this and here is the log http://alliedtm.com/uppal.txt also , here's my ser.cfg http://alliedtm.com/ser.cfg Kindly help me out , as i cannot figure it out :( and have been trying for long. Thanks & Best Regards Junaid Saeed Uppal

1 0

[Serusers] Billing
by Anders Svensson 23 Apr '06

23 Apr '06

Hi all! Is there a billing software out there for SER. I need a simple solution where my customers can keep track of their calls and credit Thanks in advance Anders ------------------------------------ Talky Communications Anders Svensson Manager anders(a)talkycom.com Sjörrödsvägen 1 S-280 23 Hästveda tel: +46 40 608 2250 mobile: +46 703 17 13 06 ------------------------------------

1 0

[Serusers] ser high availability
by hgaillac-sip＠yahoo.fr 23 Apr '06

23 Apr '06

Hello, This question has been post many times ! Is there a solution to provide H-A between two ser ? Regards Harry ___________________________________________________________________________ Faites de Yahoo! votre page d'accueil sur le web pour retrouver directement vos services préférés : vérifiez vos nouveaux mails, lancez vos recherches et suivez l'actualité en temps réel. Rendez-vous sur http://fr.yahoo.com/set

1 0

[Serusers] What to do with OPTIONS?
by Jean-Michel Hiver 23 Apr '06

23 Apr '06

Hi, I wonder how to handle OPTIONS requests knowing that my proxy uses different gateways depending on the number which is called (so it can't simply forward the request to one of them since they might have different capabilities). Is it possible to configure SER to reply with a minimalistic options set (i.e. UPDATE, REFER) or something. Cheers, Jean-Michel. -- Jean-Michel Hiver - http://ykoz.net/ Découvrez la Réunion des Technologies IP & Telecom TEL: +262 (0)262 55 03 98 - RCS 434 273 330 SAINT PIERRE

1 0

[Users] avp question?
by Frogger 22 Apr '06

22 Apr '06

OK.. I looked at the logs and discovered that usrloc and registrar MUST have the same value. When I added both modparams for usrloc and registrar, OpenSER started without a problem. Thanks! __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Users] avp question?
by Frogger 22 Apr '06

22 Apr '06

When I use: modparam("registrar", "use_domain", 1) OR modparam("usrloc", "use_domain", 1) OpenSER will not start and I get an error. Any thoughts? __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Serusers] Failure route
by Jean-Michel Hiver 22 Apr '06

22 Apr '06

Hi Guys, I am trying to get ser to t_relay a communication to a given gateway, then t_relay to another one if that didn't work. I have tried t_on_failure and t_on_negative, and failure_route[1] and reply_route[1], but all I can manage to do is to break my SER config because - presumably - I'm using old or deprecated commands. How can I do this please? I'm using: version: ser 0.9.6 (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.197.2.1 2005/07/25 16:56:24 andrei Exp $ main.c compiled on 00:45:42 Jan 11 2006 with gcc 3.3.5 Thanks for helping! Jean-Michel. -- Jean-Michel Hiver - http://ykoz.net/ Découvrez la Réunion des Technologies IP & Telecom TEL: +262 (0)262 55 03 98 - RCS 434 273 330 SAINT PIERRE

1 2

[Serusers] CSeq field in 200OK for REGISTER Method
by Gaurav Kulshreshtha 21 Apr '06

21 Apr '06

Gents, I am using 0.9.7 for ser along with RTP proxy to do some performance numbers. I notice that 200 OK for REGISTER method has a Cseq field as opposed to CSeq field. I found this bug because the UAC I am using is case sensitive. Gaurav

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users