sr-users

sr-users@lists.kamailio.org

52 participants
37559 discussions

[Serusers] Statistics explanations
by Xavier TRENTIN 26 Apr '06

26 Apr '06

Hi all, please, can anybody tell me what's the meaning of each value in Transaction Statistics: *Curren*t: 0 (2 *waiting*) *Total*: 46 (0 *local*) *Replied localy*: 37 *Completion status* 6xx: 0, 5xx: 0, 4xx: 23, 3xx: 0,2xx: 22 and what kinds of failures are taken into account in Stateless Server Statistics : 200: 101 202: 0 2xx: 0 300: 0 301: 0 302: 0 3xx: 0 400: 0 401: 0 403: 0 404: 132 407: 0 408: 0 483: 1 4xx: 0 500: 0 5xx: 0 6xx: 0 xxx: 0 *failures: 0* Thanks a lot. Best Regards, Xavier.

1 0

RE: [Serusers] serctl moni
by Gould, Aaron 26 Apr '06

26 Apr '06

i'm running 0.8.12 ________________________________ From: Leo [mailto:leo@ltcjp.com] Sent: Tue 4/25/2006 4:29 PM To: Gould, Aaron; serusers(a)lists.iptel.org Subject: RE: [Serusers] serctl moni Aaron, I had the same question awhile back. The answer I got is that there is a bug and this "waiting" parameter doesn't work. I don't know if it has been fixed yet. I am running 0.9.4. Leo P. -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Gould, Aaron Sent: Monday, April 24, 2006 12:54 PM To: serusers(a)lists.iptel.org Subject: [Serusers] serctl moni when i monitor serctl with "serctl moni" i see Transaction status Current:0 (2 waiting) what is this 2 waiting? aaron _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Users] openser behind a proxy
by buxalex＠libero.it 26 Apr '06

26 Apr '06

Hello to everybody, I have a openser server installed behind a proxy. I know I shouldn't have it, but unfortunately I must, at least for now... If I open the port 5060, can openser work as if it is connected to a public IP? Can I then use mediaproxy or anything else to connect phones outside the proxy, or behinf other proxies? Thanks Alessandro

1 0

[Users] Is this correct?
by Helge Waastad 26 Apr '06

26 Apr '06

Hi, just a quick question this time. When you have several phones registered with the same account, is it correct that the 200 OK (Register reply) should include all registered contacts for that account? It seems that I have a problem with the new Cisco 7960 image (8.20) when more than one contact address is in the reply. br -- Helge Waastad Senior Konsulent Smartnet

2 2

[Serusers] db problems after update to latest CVS
by İlker Aktuna (Koç.net) 26 Apr '06

26 Apr '06

Hi Everyone, I decided to update to the latest CVS version after meeting some problems on presence events. It starts up fine but I see the following errors in the log file: /root/ser/sbin/ser[17332]: submit_query: Unknown column 'xcap_params' in 'field list' /root/ser/sbin/ser[17332]: db_query: Error while submitting query /root/ser/sbin/ser[17332]: db_load_rls: Error while querying presentity I guess some tables in the mysql needs change. How can I drop all tables and create suitable tables fonr new SER ? Thanks, ilker <http://387555.sigclick.mailinfo.com/sigclick/020C0507/040D4E01/030C4E00/214…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Users] 404 not found message
by B Boc 26 Apr '06

26 Apr '06

Hi, When the UA sends NOTIFY messages to the server it responds with "404 not found". what is it that it is not finding. The UA's info is in the "location" table. I am using the basic out of the box "quick start" cfg file with authentication and loacation enabled. thnx

3 2

[Users] 513 response
by B Boc 26 Apr '06

26 Apr '06

hi, If i try to register with a name that includes a domain name [sub-domain for sure] ala so: joe(a)pipe.plumbers.com i get a 513 response saying that the message is too big. the code below is what is generating the message: if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; If on the other hand if i register with joe(a)182.154.23.2 using the IP address it works well. I did not test a domain name that is not a subdomain. I am using version 1.0.1

2 1

[Users] startup messages
by B Boc 26 Apr '06

26 Apr '06

Hi, When the server starts I get these two messages : 1. INFO: no fifo_db_url given - fifo DB commands disabled! 2. WARNING: fix_socket_list: could not rev. resolve 64.18.11.4 other postings on the mailing say don't worry about the 1st one. cool. What's with the second one? mysql db is local to server. the server does authenticate and store locations I just wnat to know what the messages mean/imply especialy the db one thanks

2 1

[Users] docs and mysql passwords
by Mark Kent 26 Apr '06

26 Apr '06

Hello, I'm new to openser and am trying to get things set up with OSP on freebsd (5.4, but I'm open to using another version). I have one question and one suggestion: Suggestion: the docs at http://openser.org/docs.php should point at the manuals present at iptel.org (Admin guide and Developer's guide). Without that info, there is an enormous gap in what one has to know. In particular, 'man openser' says: Full documentation on openser is available at http://www.openser.org/. but, AFAICT, it's not "Full" without the critical foundation provided by these documents: http://www.iptel.org/ser/doc/seruser/seruser.pdf http://www.iptel.org/ser/doc/serdev/serdev.pdf Question: The INSTALL for openser-1.0.1 says: >> 8) default values (database url, users and passwords) are: >> - DEFAULT_DB_URL="mysql://openser:openserrw@localhost/openser" >> - r/w user: openser ; passwd: openserrw >> - r/o user: openserro ; passwd: openserro >> NOTE: for security reasons, do change the values of passwords >> after installation Once the passwords are changed in mysql (using mysql directly), what is the best and complete way to let openser know about the new passwords? The passwords seem to appear in openserctl and openser_mysql.sh. Are we really supposed to edit these scripts? Where else should we "record" these passwords? Thanks, -mark

2 2

[Users] Availability Of the $dd Pseudo Variable
by Tavis P 26 Apr '06

26 Apr '06

I've been using the $dd variable to apply some workarounds for NAT hairpinning problems (by forcing mediaproxy), however i just realized that 1. When the received column in the Location database isn't populated (ie the client is using stun and a lookup() is executed for that username, the $dd variable is null even though the ruri contains a vaild ip:port This makes the $dd variable not ideal to be used to check the destination IP address of locally registered clients Is it supposed to work this way? As an intern solution, i was able to execute "fix_nated_register()" for ALL registrations (previously i was only executing it for nat clients) tavis

3 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users