sr-users

sr-users@lists.kamailio.org

36 participants
37545 discussions

[Users] textops from other module
by Wolfgang Hottgenroth 17 May '06

17 May '06

Hi, I want to perform a textops function, namely subst, over a SIP message. But I want to do this not from the openser script but from a module I'm about to implement. Unfortunately, the textops module did not provide an API to other modules. But I'm wondering whether it is more than simply removing the 'static' from the function declaration of the subst_f function in textops.c to make this function accessible for other modules. Or do I have a chance to set a pseudo-variable or AVP with the complete regex in one of my own modules functions and perform the subst using that pseudo-variable or AVP in the openser script directly after the call to my own function? Or is the only way to re-implement the subst_f functionality in my own module to use it from there? Thank you very much, Wolfgang

2 1

[Users] Pakistan Phone Numbers $12 Per Month from DIDX.org
by Muneeb Iqbal 17 May '06

17 May '06

DIDX.net now has high quality Pakistan Phone numbers available. Codec Support: g711 - g723, G729, ILBC. Price: $5 Setup, $12 Month You can try it for 36 Hours for FREE. For Complete Available DIDs stock, Please visit www.didx.org/did/ Thanks, Muneeb Iqbal msn = care(a)didx.org skype = DIDxnet Sip : muneeb(a)supertec.com Toll Free: 1-800-357-5800, Ext. 101003 Direct Number : 1-408-884-1966 Fax: 1-206-339-4203 Super Technologies Inc. www.supertec.com

2 1

[Serusers] multiple INVITE ACK
by Nhadie 17 May '06

17 May '06

Hi All, How can I eliminate multiple INVITE ACK of the same call? It's causing some problems on my accounting. PLeasee see attached file for example. Regards, Nhadie ________________________________________________ Message sent using UebiMiau 2.7

1 0

RE: [Serusers] How to add and use uri
by İlker Aktuna (Koç.net) 17 May '06

17 May '06

Hi, Thanks for the information. I didn't have any lookup_user check in the INVITE method. I added it before location check and now all uris seem to work fine. Thanks, ilker -----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Tuesday, May 16, 2006 5:54 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How to add and use uri I think, that this should be done using lookup_user (I think, that you have it in config, right?) Vaclav On Tue, May 16, 2006 at 05:49:53PM +0300, ?lker Aktuna (Koç.net) wrote: > Hi, > > Ser_uri works fine and adds the uri. In fact I add a default uri as : > 200000900568888885 200000900568888885(a)sip.test.net > > But then I add a new and short uri as: > 200000900568888885 0202(a)sip.test.net > > This one doesn't work. I think my configuration need something to add for looking up uris while looking up lookation. > What is the right command for that ? > > Thanks, > ilker > > > -----Original Message----- > From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] > Sent: Tuesday, May 16, 2006 5:42 PM > To: ?lker Aktuna (Koç.net) > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] How to add and use uri > > Hi, > I haven't try it, but it should work. > > Are your cmdline arguments ok? Shouldn't they be in different order? > (May be the syntax has changed few days ago.) Try to run your ser_uri without arguments and you will see. And you can run "ser_uri show" to see what was added... > > Vaclav > > On Tue, May 16, 2006 at 04:47:24PM +0300, ?lker Aktuna (Koç.net) wrote: > > Hi, > > > > Is this something that nobody has tried yet ? Or is it impossible ? > > If it's easy can someone tell me how to use it ? > > > > thanks, > > ilker > > > > ________________________________ > > > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] > > On Behalf Of ?lker Aktuna (Koç.net) > > Sent: Tuesday, May 16, 2006 11:45 AM > > To: serusers(a)lists.iptel.org > > Subject: [Serusers] How to add and use uri > > > > > > > > Hi, > > > > I add an extra uri to a user with ser_uri command: > > > > ./ser_uri add 200000900568888885 0202(a)sip.test.net > > > > When 200000900568888885 registers to ser I can call him by dialing > > 200000900568888885(a)sip.test.net Then I dial 0202(a)sip.test.net from my sip client but it fails at the lookup("location") . > > What should I add to the configuration to lookup the uris to find the location of the user ? > > > > Thanks, > > ilker > > > > > > > > C "-//W3C//DTD HTML 4.0 Transitional//EN"> Hi, > > > > Is this something that nobody has tried yet ? Or is it impossible ? > > If it's easy can someone tell me how to use it ? > > > > thanks, > > ilker > > > > ________________________________ > > > > From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] > > On Behalf Of ?lker Aktuna (Koç.net) > > Sent: Tuesday, May 16, 2006 11:45 AM > > To: serusers(a)lists.iptel.org > > Subject: [Serusers] How to add and use uri > > > > > > > > Hi, > > > > I add an extra uri to a user with ser_uri command: > > > > ./ser_uri add 200000900568888885 0202(a)sip.test.net > > > > When 200000900568888885 registers to ser I can call him by dialing > > 200000900568888885(a)sip.test.net Then I dial 0202(a)sip.test.net from my sip client but it fails at the lookup("location") . > > What should I add to the configuration to lookup the uris to find the location of the user ? > > > > Thanks, > > ilker <http://387555.sigclick.mailinfo.com/sigclick/060F060D/04054D07/03054D0A/157…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

[Serusers] serweb : error Undefined class name 'errorhandler' in application_layer/page_co
by Americania .it 17 May '06

17 May '06

I'm trying to install serweb on Linux Suse 10 with apache2 , php , PEAR , PECL Runkit installed but when I call the page http://host_name/serweb/user/index.php I get the following error : Fatal error: Undefined class name 'errorhandler' in /srv/www/htdocs/serweb/application_layer/page_controler.php on line 102 What can I do ? I've got crazy trying to understand what is wrong ...! Thanks

2 1

[Serusers] Forking problem
by Frank W. Miller 17 May '06

17 May '06

Greetings, I'm new to this list so I don't know whether this should be here or on the developer's list. I've been running a test and come across a problem. I have three phones and the SER proxy. Two of the phones are softphones, the third is an ATA. The ATA is at 192.168.1.3, and the two softphones are at 192.168.1.4 and 192.168.1.5. SER is at 192.168.1.7. In the test, 192.168.1.3 and 192.168.1.4 register with the SER as AOR '100'. 192.168.1.5 then make a call to sip:100@192.168.1.7. The INVITE is forked properly however there is some strange behavior with the ACK handling. It appears that no matter which of the phones answers, the ACK is always sent to the first phone to have registered for the AOR, whether that was the phone that answers or not. I have included an Ethereal trace file that illustrates this behavior. If you graph the VoIP call you can clearly see this situation occuring. You should be able to load this file directly into Ethereal. I would be interested in anyones thoughts on whether this is a bug or not in SER or something else. Thanks, FM

2 2

[Users] Mediaproxy and RTP streams
by Marco Meinardi 16 May '06

16 May '06

Dear all, I'm testing OpenSER with mediaproxy and I want to force the use of mediaproxy in every situation (not only when one of the users is behind a NAT); for this reason I have modified the attached configuration, starting from features-callfwd.5.0.cfg by ONSip. I am experiencing the 3 following situations: 1. Caller is PUBLIC, called is PUBLIC. RTP stream passes through mediaproxy (I verified with tcpdump) 2. Caller is PUBLIC, called is PRIVATE (NATed) RTP stream from PUBLIC to PRIVATE is direct, from PRIVATE to PUBLIC passes through mediaproxy 3. Caller is PRIVATE, called is PRIVATE RTP stream is direct in both ways, no media proxy usage. This behaviour is somehow weird... do you have any idea of what could be the reason? I have tried to manipulate OpenSER configuration but I got no behaviour change. Thanks in advance for your help! -- Marco Meinardi <m.meinardi(a)reteitaly.com> ReteItaly S.r.l. www.reteitaly.com _____________________________________________ C.so Svizzera, 185 - 10149 Torino - Italy Tel. +39 011 7767694 - Mobile +39 335 7878604 Fax +39 011 746179 _____________________________________________ [...] modparam("auth_db|permissions|uri_db|usrloc|acc|domain", "db_url", "postgres://openser:openser@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 1) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("avpops", "avp_url", "postgres://openser:openser@localhost/openser") modparam("avpops", "avp_table", "usr_preferences") modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_flag", 2) modparam("acc", "db_missed_flag", 3) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); return; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); return; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("<MY OPENSER PBULIC IP>:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { setflag(2); end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { route(1); return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- setflag(3); if (!is_uri_host_local()) { if (is_from_local() || allow_trusted()) { route(1); } else { sl_send_reply("403", "Forbidden"); }; return; }; if (method=="CANCEL") { route(1); return; } else if (method=="INVITE") { route(3); return; } else if (method=="REGISTER") { route(2); return; }; lookup("aliases"); if (uri!=myself) { route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); setflag(2); if (!isflagset(8)) { setflag(8); log(1,"Uso Media Proxy"); use_media_proxy(); }; if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ----------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); return; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); return; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); return; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); return; }; consume_credentials(); }; if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; lookup("aliases"); if (uri!=myself) { route(1); return; }; if (avp_db_load("$ruri/username", "s:callfwd")) { setflag(22); avp_pushto("$ruri", "s:callfwd"); route(6); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; if (avp_db_load("$ruri/username", "s:fwdbusy")) { if (!avp_check("s:fwdbusy", "eq/$ruri/i")) { setflag(26); }; }; if (avp_db_load("$ruri/username", "s:fwdnoanswer")) { if (!avp_check("s:fwdnoanswer", "eq/$ruri/i")) { setflag(27); }; }; t_on_failure("1"); route(1); } route[6] { # -------------------------------------------------------------------- # Call Forwarding Reply Route Handler # # This must be done as a route block because sl_send_reply() cannot be # called from the failure_route block # -------------------------------------------------------------------- lookup("aliases"); if (!isflagset(22)) { append_branch(); }; if (uri!=myself) { route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); }; route(1); } onreply_route[1] { if ((status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } failure_route[1] { if (t_check_status("487")) { return; }; if (isflagset(26) && t_check_status("486")) { if (avp_pushto("$ruri", "s:fwdbusy")) { avp_delete("s:fwdbusy"); resetflag(26); route(6); return; }; }; if (isflagset(27) && t_check_status("408")) { if (avp_pushto("$ruri", "s:fwdnoanswer")) { avp_delete("s:fwdnoanswer"); resetflag(27); route(6); return; }; }; end_media_session(); }

2 1

RE: [Serusers] Running SER Server behind NAT
by Alan 16 May '06

16 May '06

Thanks for responding. I was referring to the SIP server interface defined with a non-routable class A (10.x.x.x) IP address for example. The PIX firewall is configured with a static NAT translation (12.x.x.x <--> 10.x.x.x) and an access control list which directs traffic destined for port 5060 outside global address to the NAT'ed inside address. The problem I have is when UA1 sends an invite to UA2. After the proxy sends the invite to UA2 the "Record Route" address is the local IP address (10.x.x.x). In result, both UA1 and UA2 never receive a BYE message. Please help. ~Alan -------------------------------------------------------------------------- | SER External | UA2 | UA1 | SER Internal | 12.xxx.xxx.xx | 192.168.215.103 | 151.xxx.xxx.xx | 10.181.0.35 | | | | |INVITE SDP | | | |------------------>| | | | | | | | 100 Trying| | | |<------------------| | | | | | | | 180 Ringing| | | |<------------------| | | | | | | | 200 Ok SDP| | | |<------------------| | | | |RTP | | | |------------------>| | | | | | | 200 Ok| | | |<------------------| | | | 200 Ok| | | |<------------------| | | | 200 Ok| | | |<------------------| | | | |RTP | | | |------------------>| | | |BYE | | | |-------------------------------------->| | |BYE | | | |-------------------------------------->| | |BYE | | | |-------------------------------------->| -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Michael Grigoni Sent: Thursday, May 11, 2006 3:50 AM To: serusers(a)lists.iptel.org Subject: Re: [Serusers] Running SER Server behind NAT Alan wrote: > Is it possible to run SER SIP server behind a NAT? If so, what type of > configuration changes am i looking at? My current scenario is as > follows. > > > Internet <-----> Pix (12.x.x.x translates to 10.x.x.x) <----> SIP Server We have been running ser 0.8.99-dev19 (sparc/openbsd) for more than a year on NAT; our solution required ser to run on the NAT border router so that it could service the public net interfaces and the internal NAT'ed interfaces. We use rtpproxy on the same box. I have not actively watched the lists for any developments involving running it on a host only on a private ip space. I don't know of a ser port to run on the Pix. All external UAs so far have been on public ip addresses; we haven't yet dealt with the issue of external UAs behind NAT (perhaps a STUN solution would work, or a VPN where feasible). Michael Grigoni Cybertheque Museum _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

3 3

[Serusers] UAC support
by Dominique Pichon 16 May '06

16 May '06

Hi I try to play with msilo. I manage to have messages stored in the database but I do not manage to send them to the user when this one becomes on-line. When I look at /var/log/messages: ERROR: mk_proxy: could not resolve hostname: "xxx.fr" with xxx.fr the name of my domain the server is: sip.xxx.fr more details May 16 19:41:51 S /usr/local/sbin/ser[12042]: ERROR: mk_proxy: could not resolve hostname: "xxx.fr" May 16 19:41:51 S /usr/local/sbin/ser[12042]: ERROR: uri2proxy: bad host name in URI <sip:dom@xxx.fr:5062;transport=udp> May 16 19:41:51 S /usr/local/sbin/ser[12042]: ERROR: uri2sock: Can't create a dst proxy May 16 19:41:51 S /usr/local/sbin/ser[12042]: t_uac: no socket found Here is ser.cfg # # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes */ check_via=no # (cmd. line: -v) dns=on # (cmd. line: -r) rev_dns=off # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" listen=address v6 listen=sip.xxx.fr listen=address v4 alias="xxx.fr" alias="canonical name" alias="sip.xxx.fr" alias="v4 address" alias="v4 address" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/msilo.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "db_url","mysql://ser:xxxxx@localhost/ser") modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("msilo", "db_url", "mysql://ser:xxxxx@localhost/ser") modparam("msilo", "db_table", "silo") #modparam("msilo", "registrar", "sip:dom@xxx.fr") modparam("rr", "enable_full_lr", 1) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1 ) modparam("acc", "db_url", "mysql://ser:xxxxx@localhost/ser") modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 1) #modparam("acc", "log_fmt", "fisum") modparam("acc", "report_ack", 1) modparam("acc", "log_level", 5) modparam("acc", "failed_transactions", 1) modparam("acc", "report_cancels", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication log(1, "Prompting for login/pass\n"); if (!www_authorize("xxx.fr", "subscriber")) { www_challenge("xxx.fr", "0"); }; save("location"); m_dump(); # MSILO - dumping user's offline messages #if (m_dump()) #{ # log(1, "MSILO: offline messages dumped - if they were\n"); #}else{ # log(1, "MSILO: no offline messages dumped\n"); #}; break; }; if (!lookup("location")) { if ((method=="INVITE" || method=="ACK") && t_newtran() ) { t_reply("404", "Not Found"); #acc_request("404 Not Found"); break; }; if (method == "MESSAGE") { log(1,"Message recu en absence\n"); if (!t_newtran()) { log(1,"t_newtran MSILO\n"); sl_reply_error(); break; } log(1,"MESSAGE received -> storing using MSILO\n"); # MSILO - storing as offline message if (m_store("0")) { log(1,"MSILO: offline message stored\n"); if (!t_reply("202", "Accepted")) { sl_reply_error(); }; }else{ log(1,"MSILO: offline message NOT stored\n"); if (!t_reply("503", "Service Unavailable")) { sl_reply_error(); }; }; break; }; #if (method == "MESSAGE") { #log(1, "MSILO: message recu absent\n"); # }; #}else { #if (method == "MESSAGE") { #log(1, "MSILO: message recu present\n"); #}; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } If i add modparam("msilo", "registrar", "sip:dom@xxx.fr") then it complains May 16 19:39:36 S2 /usr/local/sbin/ser[11894]: MESSAGE received -> storing using MSILO May 16 19:39:36 S2 /usr/local/sbin/ser[11894]: MSILO: offline message NOT stored May 16 19:39:36 S2 /usr/local/sbin/ser[11895]: Warning: run_failure_handlers: no UAC support (0, 256) any hints are welcome!

1 0

RE: [Serusers] Which IM client
by İlker Aktuna (Koç.net) 16 May '06

16 May '06

Thanks. How do you connect to a SIP server with Windows Messenger 5.1 ? It only allows me to connect to Passport. -----Original Message----- From: Gould, Aaron [mailto:aaron.gould@ngc.com] Sent: Tuesday, May 16, 2006 4:47 PM To: İlker Aktuna (Koç.net); Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client http://www.microsoft.com/downloads/details.aspx?FamilyID=a8d9eb73-5f8c-4b9a… click the "continue" button ________________________________ From: serusers-bounces(a)lists.iptel.org on behalf of Ilker Aktuna (Koç.net) Sent: Tue 5/16/2006 6:42 AM To: Suraj Kumar; serusers(a)lists.iptel.org Subject: RE: [Serusers] Which IM client Hi, Where can I find Windows Messenger 5.1 ? Thanks, ilker -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Suraj Kumar Sent: Tuesday, May 16, 2006 3:32 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Which IM client Hi, a) Can any one suggest a free IM client that I can use to test SIP+SIMPLE using the ser + presence ? I tried with windows messenger 5.1, but it does not seems to be working with the ser + presence server configuration that I used the latest snap shot (ser-0.10.99-dev35-pa-4.1_src.tar.gz). b) Also, can any one suggest a working sample config for presence (without using the database)? Any suggestions on this is highly appreciated. Regards, Suraj _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers <http://387555.sigclick.mailinfo.com/sigclick/03090E07/07044904/04004500/201…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________ <http://387555.sigclick.mailinfo.com/sigclick/070F0500/07044E03/000E4E07/547…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users