sr-users

sr-users@lists.kamailio.org

51 participants
37558 discussions

RE: [Users] Avpops tutorial
by Douglas Garstang 04 Jun '06

04 Jun '06

I'm not one of the developers. -----Original Message----- From: Juha Heinanen [mailto:jh@tutpro.com] Sent: Fri 6/2/2006 11:58 PM To: Douglas Garstang Cc: Bogdan-Andrei Iancu; Sam Lee; users(a)openser.org Subject: RE: [Users] Avpops tutorial Douglas Garstang writes: > I'm going to have to side with Sam. I've read the avpops tutorial > more times than I can remember, and it doesn't make much more sense > than it did six months ago. The tutorial is bad. perhaps you can write a better one. -- juha

2 1

[Serusers] openser+asterisk+voicemail
by ram 04 Jun '06

04 Jun '06

Hi Just started Learning OPENSER, installing at my office Now iam able to install and configured with my VoIP provider and iam able to make calls out, using Public IP, not tried yes NAT when i want to voice mail, openser, send email, But iam looking store and retrieve voice message, so i decided to install asterisk and send voice messages to Asterisk as per the site document i have configured iam running OPENSER 5060 port and Asterisk 5090 port on same server As guided document, maded Realtime config with my mysql, working Fine iam able to see both are contacting when i restart sip reload , so i able to see openser log, and console of asterisk Now the problem, when i call extention which is not registered I get fast busy tone, and i dont see any message in Asterisk console, but in the open ser log i can see User Not found can some one help me to achive this but when i dial *86, i can hear voice, saying that no messages, that means asterisk is working any help will be appriciated ram

1 0

[Users] Openser+Asterisk Voice mail
by ram 04 Jun '06

04 Jun '06

1 0

Re: [Users] Openser+Asterisk Voice mail
by Glenn Dalgliesh 04 Jun '06

04 Jun '06

Will look at it closer tomarrow sometime but a ngrep of the sip traffic would tell us if ser or asterisk giving user not found. --------------------- Sent with ChatterEmail True push email for the Treo Smartphone www.chatteremail.com -----Original Message----- From: "Glenn Dalgliesh" <glenn(a)routerboy.com> Date: Monday, Jun 5, 2006 7:36 pm Subject: Re: [Users] Openser+Asterisk Voice mail ok remove the route(1); and replace t_relay(); in the failure_route[2]; section as below failure_route[2] { if(!t_was_cancelled()) { revert_uri(); rewritehostport("asterisk-ip-voicemail:5090"); append_branch(); #PREVENT SOME CRAZY VOICEMAIL LOOP xlog("L_INFO", "INFO: CALL TO VOICEMAIL"); setflag(10); t_relay(); } ----- Original Message ----- From: ram To: Glenn Dalgliesh Cc: users(a)openser.org Sent: Monday, June 05, 2006 1:11 AM Subject: Re: [Users] Openser+Asterisk Voice mail Hi here is my config iam able to dial *86, i get voice message that no voice messages But the call rewriting when the user not available it should go to asterisks voice mail ram [root@sert openser]# more openser.cfg # # $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) log_facility=LOG_LOCAL7 fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/acc.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/group.so" loadmodule "/usr/lRe: [Users] Openser+Asterisk Voice mail"Glenn Dalgliesh" <glenn(a)routerboy.com>To: "ram" <talk2ram(a)gmail.com> Cc: users(a)openser.org

1 0

[Users] Avpops tutorial
by Sam Lee 03 Jun '06

03 Jun '06

Hi everyone, I'm a newbie when it comes to AVPops, so please bear with me. Am looking at the avpops tutorial , when i came across this web : http://www.voice-system.ro/docs/avpops/ar01s08.html#ex_bitmap_acl It teaches you how to use make use of avpops to create a bitmap acl. For the whole of the website, nothing was done to explain to you what each and every of those commands and the values in it are for. It just doesn't make sense to me ?! For example , they said place this in :- modparam("avpops","db_scheme","scheme0:username_col=username;domain_col= domain;value_col=acl;value_type=integer;table=subscriber") modparam("avpops","avp_aliases","acl=i:800") Can i ask what these 2 lines are talking about ??! Please help explain to me how to use that bitmap acl ! Anything that we need to change at the database? Thanks alot! REgards, Sam

3 2

[Users] Call Hunting: use Avpop or LCR module ?
by Rafael J. Risco G.V. 02 Jun '06

02 Jun '06

hi I would like to read some opinions to know which method its better to implement Call Hunting, using serial forking with 'avpops' or 'lcr' module 'load_contacts()/next_contact()' functions, does someone has an example of any of these methods? rafael

5 8

[Serusers] SER with Heartbeat in two node cluster
by Stephen Helfen 02 Jun '06

02 Jun '06

All, I am trying to implement a two-node cluster using heartbeat on two SIP SER proxies running on Linux. I am having a bit of trouble as it appears the two proxies are sharing messages rather than acting as an active and standby. Has anyone succesfully implemented this type of configuration and/or does anyone know a good reference for enabling this configuration? Thanks in advance. Steve

1 0

[Serusers] RE: Ser.cfg
by Sam Lee 02 Jun '06

02 Jun '06

First of all , check whether the users are on this domain ruh.ac.lk Place in the following :- alias=ruh.ac.lk Alias=<ip address of server> Then try registration again. If still cannot, ngrep is the way out. -----Original Message----- From: S.A.S. Lorensuhewa [mailto:aruna@cc.ruh.ac.lk] Sent: Friday, June 02, 2006 4:14 PM To: Sam Lee Cc: S.A.S. Lorensuhewa; serusers(a)lists.iptel.org Subject: Re: Ser.cfg Dear Lee, I found the SIP Gateway entry. But still there UA is not registering the server. Follwing is the ser.cfg setting. Is there any way to check registration from the commond line in the Linx box ( my ser and mysql are running in Fedor 5 box) Aruna # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("ruh.ac.lk", "subscriber")) { www_challenge("ruh.ac.lk", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Sam Lee writes: > There should be a Proxy address field in the configuration of the > X-Lite. Check thru the configs carefully. > > -----Original Message----- > From: S.A.S. Lorensuhewa [mailto:aruna@cc.ruh.ac.lk] > Sent: Friday, June 02, 2006 3:51 PM > To: Sam Lee > Cc: S.A.S. Lorensuhewa; serusers(a)lists.iptel.org > Subject: Re: Ser.cfg > > > Daer Lee, > > > Where to put Sip proxy address? > > Following entry I leave blank > Out bound Sip proxy: ???? > > > Aruna > > > > > Sam Lee writes: > >> Looks okay to me >> You should put in Authorization user as well. Just use aruna will do. >> Remember to put in your sip proxy address. >> >> -----Original Message----- >> From: S.A.S. Lorensuhewa [mailto:aruna@cc.ruh.ac.lk] >> Sent: Friday, June 02, 2006 3:43 PM >> To: Sam Lee >> Cc: S.A.S. Lorensuhewa; serusers(a)lists.iptel.org >> Subject: Re: Ser.cfg >> >> Dear Lee, >> >> How the client (X-Lite) locate the Sip server? >> >> X-Lite Configuration is give below >> >> >> 1. Sip Proxy - Default setting >> >> Enable: yes >> Display name: Aruna >> User Name: aruna(a)192.248.48.12 >> Authorization user: >> Password: arunaxyz >> Dmain: ruh.ac.lk >> >> 2. Network Setting >> >> Auto detect IP: yes >> Listen on IP: ????? >> Use x-NAT .... SIP/RTP ports: Never >> Listen Sip port: 5060 >> Listen RTP port: 8000 >> ... >> Primary DNS: >> >> Can you please check these things and correct me if any wrong or need >> adtional info. >> >> But I didn't put any DNS entry as I used >> >> export SIP_DOMAIN="192.248.48.12" >> >> Aruna >> >> >> Sam Lee writes: >> >>> Hi Aruna, >>> >>> The domain don't need to be a 'real' domain. It is NOT a Internet >>> domain, it is just an identifier to group all your sip client >> together. >>> Just make sure that your domain matches those sip accounts that you >>> are trying to authenticate. >>> In this case, you can even put sip.com for your domain (if you like >>> ;> >> >>> ). >>> So you will do a export SIP_DOMAIN="sip.com" >>> >>> Got it ? >>> >>> Sam >>> >>> -----Original Message----- >>> From: S.A.S. Lorensuhewa [mailto:aruna@cc.ruh.ac.lk] >>> Sent: Friday, June 02, 2006 3:20 PM >>> To: Sam Lee >>> Cc: S.A.S. Lorensuhewa; serusers(a)lists.iptel.org >>> Subject: Re: Ser.cfg >>> >>> Dear Lee and Others, >>> >>> My server hostname is Orange and domain is ruh.ac.lk. In that case I >>> need to to put ruh.ac.lk in this entry. Do I need to put DNS entry >>> With SRV to resolve when Clients need? >>> >>> In the initial setting in the /etc/profile I put following entry for >>> SIP_DOMAIN >>> >>> export SIP_DOMAIN="192.248.48.12" >>> >>> Now I think this need to be "ruh.ac.lk" (or "Ornage.ruh.ac.lk"). >>> >>> Can you help me in this problem. >>> >>> Regards >>> >>> Aruna >>> >>> >>> Sam Lee writes: >>> >>>> XX = your sip domain >>>> YY = "subscriber" >>>> >>>> So if your sip domain is abc.com >>>> It should read like this >>>> Www_authorize("abc.com","subcriber") >>>> >>>> -----Original Message----- >>>> From: serusers-bounces(a)lists.iptel.org >>>> [mailto:serusers-bounces@lists.iptel.org] On Behalf Of S.A.S. >>>> Lorensuhewa >>>> Sent: Friday, June 02, 2006 1:58 PM >>>> To: serusers(a)lists.iptel.org >>>> Subject: [Serusers] Ser.cfg >>>> >>>> Dear All, >>>> >>>> I have problem of registering from UA's. >>>> >>>> So I am going through all the setting in the ser.cfg. Can somebody >>>> tell me what should be in the www_authorize(" XX","YY ") function >>>> in > >>>> the route section. >>>> >>>> XX ? >>>> YY ? >>>> >>>> Aruna. >>>> _______________________________________________ >>>> Serusers mailing list >>>> Serusers(a)lists.iptel.org >>>> http://lists.iptel.org/mailman/listinfo/serusers >>> >>> >>> >>> ---------------------------------------------------------- >>> S. A. S. Lorensuhewa >>> Head, Department of Computer Science University of Ruhuna, Matara, >>> Sri Lanka >>> Telephone: 0094 (0)41 2227019 >>> Fax: 0094 (0)41 2222683 >>> Email: lorensuhewa(a)cc.ruh.ac.lk, aruna(a)cc.ruh.ac.lk >>> >> >> >> >> ---------------------------------------------------------- >> S. A. S. Lorensuhewa >> Head, Department of Computer Science >> University of Ruhuna, Matara, Sri Lanka >> Telephone: 0094 (0)41 2227019 >> Fax: 0094 (0)41 2222683 >> Email: lorensuhewa(a)cc.ruh.ac.lk, aruna(a)cc.ruh.ac.lk >> > > > > ---------------------------------------------------------- > S. A. S. Lorensuhewa > Head, Department of Computer Science > University of Ruhuna, Matara, Sri Lanka > Telephone: 0094 (0)41 2227019 > Fax: 0094 (0)41 2222683 > Email: lorensuhewa(a)cc.ruh.ac.lk, aruna(a)cc.ruh.ac.lk > ---------------------------------------------------------- S. A. S. Lorensuhewa Head, Department of Computer Science University of Ruhuna, Matara, Sri Lanka Telephone: 0094 (0)41 2227019 Fax: 0094 (0)41 2222683 Email: lorensuhewa(a)cc.ruh.ac.lk, aruna(a)cc.ruh.ac.lk

2 1

RE: [Serusers] PA error sending notifies
by İlker Aktuna (Koç.net) 02 Jun '06

02 Jun '06

Hi Samuel, Did you manage to get message rules from im-rules file ? Do you know which path does SER check if you write the authorize_message command as in below ? if (authorize_message("im-rules.xml")){ If you managed to make it work, which client do you use for this ? Did you make any change in the source ? Thanks, ilker -----Original Message----- From: samuel [mailto:samu60@gmail.com] Sent: Tuesday, May 16, 2006 10:53 AM To: İlker Aktuna (Koç.net) Cc: Vaclav Kubart; serusers(a)iptel.org Subject: Re: [Serusers] PA error sending notifies If you are using XCAP authentication for MESSAGEs, there's a function called authorize_message that needs to have as parameter the file name of the IM ruleset. For user sam, in xcap-root/im-rules/users/sam/im-rules.xml there are the rules for this function. The XML file is similar to the presence-rules but has important differences (correct me if I'm wrong, Vaclav!!!): *it only has a blacklist parameter (no whitelist!!) *the namespace is different (so be carefull in copy&paste from the presence-rules!!!) and, as Vaclav poitned out "proprietary" from iptel. About the structure I have: x86 debian testing. Libraries versions I don't know exactly but the ones in the testing repository EXCEPT a library which I had to get for serweb from the stable version...but it's not affecting SER part. Samuel. 2006/5/16, İlker Aktuna (Koç. net ) <ilkera(a)koc.net>: > > > > > Hi, > > What did you mean by following: > > >Instead of > >> > >> if (authorize_message("http://localhost/xcap")) { > > > >there should be > > > >if (authorize_message("im-rules.xml")){ > > Btw, did you receive my email with following questions : > > >> I have the same problem with notification and other presence > >> messages > with you. > >> Can you tell me which Linux distribution you are using Ser on ? > >> Also please include version numbers for libraries that are required > >> by > Ser. > >> > >> I am trying to find similarities between yours and my ser server. > > Regards, > ilker > > -----Original Message----- > From: serusers-bounces(a)iptel.org > [mailto:serusers-bounces@iptel.org] On Behalf Of samuel > Sent: Monday, May 15, 2006 7:13 PM > To: Vaclav Kubart > Cc: serusers(a)iptel.org > Subject: Re: [Serusers] PA error sending notifies > > Let's see if I can finish the e-mail before gmail decides it's > enough...:P > > 006/5/15, samuel <samu60(a)gmail.com>: > > Following with the handbook... > > > > > the authorize message in the sample confgi files has as parameter > > the xcap root while it should have the xml file containing the auth.rules. > > > Instead of > > > > > if (authorize_message("http://localhost/xcap")) { > > there should be > > if (authorize_message("im-rules.xml")){ > > > > > > > > > 2006/5/15, samuel <samu60(a)gmail.com>: > > > First of all, I have to thank you for the time you spent writing > > > the handbook, it's really really helpfull....I wish all SER > > > related parts had this docs.. > > > > > > I'll try to get familiar with the code of the notifications and > > > I'll try to find something....which I don't thing so :P. I'll also > > > merge the two functionalities (proxy + presence) in a unique > > > config file to see if it works. > > > I hope I can provide more info these following days. > > > > > > About the missing things in the presence handbook, probably the > > > most important is the new xcap module because in the sample config > > > files it's missing. > > > Another thing is that in the XCAP structure description, the > > > im-rules directory is missing, which might lead to > > > misunderstandings. I downloaded the structure from the iptel's ftp > > > and inside the im-rules there were several files corresponding to > > > presence-rules which should be either removed or updated with the > > > im-rules namespaces and removing the whitelist. > > > > > > Thanks, > > > > > > Samuel. > > > > > > > > > > > > > > > 2006/5/15, Vaclav Kubart <vaclav.kubart(a)iptel.org>: > > > > Hi, > > > > this problem I'm trying to solve with Ilker Aktuna. I try to > > > > simulate it on my machine and let you know. Or if you solve it, > > > > please > let me know. > > > > :-) > > > > > > > > Please, could you tell me, what things you were missing in > > > > presence handbook? I'm trying to do it as useful as possible and > > > > whatever ideas are welcome... > > > > > > > > Vaclav > > > > > > > > On Mon, May 15, 2006 at 01:38:02PM +0200, samuel wrote: > > > > > Hi all, > > > > > > > > > > I recently had a few hours and start installing the presence > > > > > staff and I have to say that I have it amost workign thanks to > > > > > the presence handbook, the mailing list and, obviously, a > > > > > little bit of code review..:P > > > > > > > > > > I have two SER instances, the "proxy" and the "presence server" > > > > > (both with last CVS code) co-located in the same host and I > > > > > have an issue when the "presence server" tries to send the > > > > > NOTIFY requests. Below there's an attched log showing the > > > > > problem (on IP a.b.c.d I've got the two instances): > > > > > > > > > > 3(30682) DEBUG notify.c:378: sending winfo notify > > > > > 3(30682) DEBUG notify.c:383: winfo document created > > > > > 3(30682) DEBUG notify.c:391: creating headers > > > > > 3(30682) DEBUG notify.c:398: headers created > > > > > 3(30682) DEBUG:tm:t_uac: > > > > > > next_hop=<sip:a.b.c.d;transport=tcp;ftag=c77b3f33;lr=on> > > > > > 3(30682) t_uac: no socket found > > > > > 3(30682) DEBUG notify.c:402: request sent with result -7 > > > > > 3(30682) ERROR: notify.c:404: Can't send watcherinfo > > > > > notification (-7) > > > > > > > > > > This problem appears in other places, not only in the > > > > > notifications for winfo so probably there's somthing in the > > > > > selection of the outgoing socket directing to the local IP. > > > > > > > > > > >From the proxy part I just ust t_forward_nonack for the "SIMPLE" > > > > > messages with record route....maybe adding the port in the > > > > > record route should help? > > > > > <http://387555.sigclick.mailinfo.com/sigclick/010A000C/0406440E/05054B0B/622…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] RE: Ser.cfg
by Sam Lee 02 Jun '06

02 Jun '06

There should be a Proxy address field in the configuration of the X-Lite. Check thru the configs carefully. -----Original Message----- From: S.A.S. Lorensuhewa [mailto:aruna@cc.ruh.ac.lk] Sent: Friday, June 02, 2006 3:51 PM To: Sam Lee Cc: S.A.S. Lorensuhewa; serusers(a)lists.iptel.org Subject: Re: Ser.cfg Daer Lee, Where to put Sip proxy address? Following entry I leave blank Out bound Sip proxy: ???? Aruna Sam Lee writes: > Looks okay to me > You should put in Authorization user as well. Just use aruna will do. > Remember to put in your sip proxy address. > > -----Original Message----- > From: S.A.S. Lorensuhewa [mailto:aruna@cc.ruh.ac.lk] > Sent: Friday, June 02, 2006 3:43 PM > To: Sam Lee > Cc: S.A.S. Lorensuhewa; serusers(a)lists.iptel.org > Subject: Re: Ser.cfg > > Dear Lee, > > How the client (X-Lite) locate the Sip server? > > X-Lite Configuration is give below > > > 1. Sip Proxy - Default setting > > Enable: yes > Display name: Aruna > User Name: aruna(a)192.248.48.12 > Authorization user: > Password: arunaxyz > Dmain: ruh.ac.lk > > 2. Network Setting > > Auto detect IP: yes > Listen on IP: ????? > Use x-NAT .... SIP/RTP ports: Never > Listen Sip port: 5060 > Listen RTP port: 8000 > ... > Primary DNS: > > Can you please check these things and correct me if any wrong or need > adtional info. > > But I didn't put any DNS entry as I used > > export SIP_DOMAIN="192.248.48.12" > > Aruna > > > Sam Lee writes: > >> Hi Aruna, >> >> The domain don't need to be a 'real' domain. It is NOT a Internet >> domain, it is just an identifier to group all your sip client > together. >> Just make sure that your domain matches those sip accounts that you >> are trying to authenticate. >> In this case, you can even put sip.com for your domain (if you like >> ;> > >> ). >> So you will do a export SIP_DOMAIN="sip.com" >> >> Got it ? >> >> Sam >> >> -----Original Message----- >> From: S.A.S. Lorensuhewa [mailto:aruna@cc.ruh.ac.lk] >> Sent: Friday, June 02, 2006 3:20 PM >> To: Sam Lee >> Cc: S.A.S. Lorensuhewa; serusers(a)lists.iptel.org >> Subject: Re: Ser.cfg >> >> Dear Lee and Others, >> >> My server hostname is Orange and domain is ruh.ac.lk. In that case I >> need to to put ruh.ac.lk in this entry. Do I need to put DNS entry >> With SRV to resolve when Clients need? >> >> In the initial setting in the /etc/profile I put following entry for >> SIP_DOMAIN >> >> export SIP_DOMAIN="192.248.48.12" >> >> Now I think this need to be "ruh.ac.lk" (or "Ornage.ruh.ac.lk"). >> >> Can you help me in this problem. >> >> Regards >> >> Aruna >> >> >> Sam Lee writes: >> >>> XX = your sip domain >>> YY = "subscriber" >>> >>> So if your sip domain is abc.com >>> It should read like this >>> Www_authorize("abc.com","subcriber") >>> >>> -----Original Message----- >>> From: serusers-bounces(a)lists.iptel.org >>> [mailto:serusers-bounces@lists.iptel.org] On Behalf Of S.A.S. >>> Lorensuhewa >>> Sent: Friday, June 02, 2006 1:58 PM >>> To: serusers(a)lists.iptel.org >>> Subject: [Serusers] Ser.cfg >>> >>> Dear All, >>> >>> I have problem of registering from UA's. >>> >>> So I am going through all the setting in the ser.cfg. Can somebody >>> tell me what should be in the www_authorize(" XX","YY ") function in >>> the route section. >>> >>> XX ? >>> YY ? >>> >>> Aruna. >>> _______________________________________________ >>> Serusers mailing list >>> Serusers(a)lists.iptel.org >>> http://lists.iptel.org/mailman/listinfo/serusers >> >> >> >> ---------------------------------------------------------- >> S. A. S. Lorensuhewa >> Head, Department of Computer Science >> University of Ruhuna, Matara, Sri Lanka >> Telephone: 0094 (0)41 2227019 >> Fax: 0094 (0)41 2222683 >> Email: lorensuhewa(a)cc.ruh.ac.lk, aruna(a)cc.ruh.ac.lk >> > > > > ---------------------------------------------------------- > S. A. S. Lorensuhewa > Head, Department of Computer Science > University of Ruhuna, Matara, Sri Lanka > Telephone: 0094 (0)41 2227019 > Fax: 0094 (0)41 2222683 > Email: lorensuhewa(a)cc.ruh.ac.lk, aruna(a)cc.ruh.ac.lk > ---------------------------------------------------------- S. A. S. Lorensuhewa Head, Department of Computer Science University of Ruhuna, Matara, Sri Lanka Telephone: 0094 (0)41 2227019 Fax: 0094 (0)41 2222683 Email: lorensuhewa(a)cc.ruh.ac.lk, aruna(a)cc.ruh.ac.lk

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users