sr-users

sr-users@lists.kamailio.org

52 participants
37559 discussions

Re: [Serusers] ser to ser relay
by Szabolcs Szasz 07 Jun '06

07 Jun '06

Hi Daniel! Thank you for your help. It's working fine. Szabolcs > > > On 06/06/06 14:41, Szabolcs Szasz wrote: >> Hi >> I have 2 SIP networks with 2 SERs like on this diagramm: >> >> UA1---------SER1-----------SER----------UA2 >> >> I authenticate all UAs and all calls (local, long distance and >> international) on both SERs. How can I relay the call from UA1 to UA2 ? >> If for example UA1 has local privileges, is there a posibility to relay >> the call to UA2 without any more authentication? There is an error 407 >> (Proxy Authentication Required). >> > You can check the source ip of the request and if it comes from proxy > SER1 then do not authenticate again the request. > > Daniel > > -- > http://www.openser.org > > >> Thank you in advance. >> >> Szasz Szabolcs >> >> >> >> >> > > > -- > This message was scanned for spam and viruses by BitDefender. > For more information please visit http://linux.bitdefender.com/ > -- This message was scanned for spam and viruses by BitDefender. For more information please visit http://linux.bitdefender.com/

1 0

[Serusers] Changing syslog facility.level in ser.cfg
by Graham Lewis 07 Jun '06

07 Jun '06

Is there a way to change the syslog facility from "daemon" to "local7" in ser.cfg In particular I'd like to set the output from the acc module to local7.notice. I see I can change the syslog level using "log_level" but is there a way to change the facility other than editing it in main.c and re-compiling? Graham Lewis This email was sent on behalf of Spitfire Technology Group. This e-mail is strictly confidential and intended solely for the addressee(s). It may contain personal and confidential information and as such may be protected by the Data Protection Acts 1984 and 1998. If you are not the intended recipient of this email you must: (i) Not disclose, copy or distribute its contents to any other person nor use its contents in any way or you may be acting unlawfully; (ii) Contact Spitfire immediately on +44 (0) 20 7501 3000 quoting the name of the sender and the addressee then delete it from your system. Any views or opinions expressed within this email are those of the author and do not necessarily represent those of Spitfire Technology Group. Email may be monitored for security purposes. Spitfire have scanned this email for viruses but does not accept any responsibility once this email has been transmitted. You should scan attachments (if any) for viruses.

2 1

[Users] Memory Leak in latest cvs version?
by Douglas Garstang 07 Jun '06

07 Jun '06

I'm wondering if there's a memory leak or something in the latest cvs version of openser. Only been running it for a while, processing very few calls, and this was appearing... Jun 7 08:10:58 apollo /usr/local/sbin/openser[7329]: ERROR: get_record: rdata parse error Jun 7 08:10:58 apollo /usr/local/sbin/openser[7329]: ERROR: get_record Jun 7 08:10:58 apollo /usr/local/sbin/openser[7329]: ERROR: build_req_buf_from_sip_req: out of memory Jun 7 08:10:58 apollo /usr/local/sbin/openser[7329]: ERROR:tm:print_uac_request: no pkg_mem Jun 7 08:10:58 apollo /usr/local/sbin/openser[7329]: ERROR:tm:t_forward_nonack: failure to add branches Jun 7 08:10:58 apollo /usr/local/sbin/openser[7329]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 424 Jun 7 08:10:58 apollo /usr/local/sbin/openser[7329]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 424 Jun 7 08:10:58 apollo /usr/local/sbin/openser[7333]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:01 apollo /usr/local/sbin/openser[7331]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:02 apollo /usr/local/sbin/openser[7327]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:02 apollo /usr/local/sbin/openser[7332]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:02 apollo /usr/local/sbin/openser[7330]: ERROR: dns_cname_parser: out of memory Jun 7 08:11:02 apollo /usr/local/sbin/openser[7330]: ERROR: get_record: rdata parse error Jun 7 08:11:02 apollo /usr/local/sbin/openser[7330]: ERROR: get_record Jun 7 08:11:02 apollo /usr/local/sbin/openser[7330]: ERROR: build_req_buf_from_sip_req: out of memory Jun 7 08:11:02 apollo /usr/local/sbin/openser[7330]: ERROR:tm:print_uac_request: no pkg_mem Jun 7 08:11:02 apollo /usr/local/sbin/openser[7330]: ERROR:tm:t_forward_nonack: failure to add branches Jun 7 08:11:02 apollo /usr/local/sbin/openser[7330]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 444 Jun 7 08:11:02 apollo /usr/local/sbin/openser[7330]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 444 Jun 7 08:11:03 apollo /usr/local/sbin/openser[7329]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:03 apollo /usr/local/sbin/openser[7333]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:04 apollo /usr/local/sbin/openser[7327]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:04 apollo /usr/local/sbin/openser[7332]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:04 apollo /usr/local/sbin/openser[7326]: ERROR: dns_cname_parser: out of memory Jun 7 08:11:04 apollo /usr/local/sbin/openser[7326]: ERROR: get_record: rdata parse error Jun 7 08:11:04 apollo /usr/local/sbin/openser[7326]: ERROR: get_record Jun 7 08:11:04 apollo /usr/local/sbin/openser[7326]: ERROR: build_req_buf_from_sip_req: out of memory Jun 7 08:11:04 apollo /usr/local/sbin/openser[7326]: ERROR:tm:print_uac_request: no pkg_mem Jun 7 08:11:04 apollo /usr/local/sbin/openser[7326]: ERROR:tm:t_forward_nonack: failure to add branches Jun 7 08:11:04 apollo /usr/local/sbin/openser[7326]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 441 Jun 7 08:11:04 apollo /usr/local/sbin/openser[7326]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 441 Jun 7 08:11:05 apollo /usr/local/sbin/openser[7328]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:05 apollo /usr/local/sbin/openser[7329]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:05 apollo /usr/local/sbin/openser[7333]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:06 apollo /usr/local/sbin/openser[7332]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:06 apollo /usr/local/sbin/openser[7326]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 379 Jun 7 08:11:06 apollo /usr/local/sbin/openser[7330]: ERROR: dns_naptr_parser: out of memory Jun 7 08:11:06 apollo /usr/local/sbin/openser[7330]: ERROR: get_record: rdata parse error Jun 7 08:11:06 apollo /usr/local/sbin/openser[7330]: ERROR: get_record Jun 7 08:11:06 apollo /usr/local/sbin/openser[7330]: ERROR: dns_srv_parser: out of memory Jun 7 08:11:06 apollo /usr/local/sbin/openser[7330]: ERROR: get_record: rdata parse error Jun 7 08:11:06 apollo /usr/local/sbin/openser[7330]: ERROR: get_record Jun 7 08:11:06 apollo /usr/local/sbin/openser[7330]: ERROR: build_req_buf_from_sip_req: out of memory Jun 7 08:11:06 apollo /usr/local/sbin/openser[7330]: ERROR:tm:print_uac_request: no pkg_mem Jun 7 08:11:06 apollo /usr/local/sbin/openser[7330]: ERROR:tm:t_forward_nonack: failure to add branches Jun 7 08:11:06 apollo /usr/local/sbin/openser[7330]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 424

2 1

[Serusers] Problem in running Serweb
by sumit dengri 07 Jun '06

07 Jun '06

sir there is a problem in the user/admin login form.It shows following Warnings: Warning: virtual(): Unable to include '/usr/local/sumit/serweb-0.9.4/domains/_default/prolog.html' - request execution failed in /usr/local/sumit/serweb-0.9.4/html/page.php on line 79 192.168.1.7 user management Warning: virtual(): Unable to include '/usr/local/sumit/serweb-0.9.4/domains/_default/separator.html' - request execution failed in /usr/local/sumit/serweb-0.9.4/html/page.php on line 81. PLZ Suggest some way out to solve it. waiting for your reply. regards. Send instant messages to your online friends http://in.messenger.yahoo.com Stay connected with your friends even when away from PC. Link: http://in.mobile.yahoo.com/new/messenger/

2 1

[Serusers] "domain unknown" when add user
by Suranut Sappaso 07 Jun '06

07 Jun '06

After install ser, i can not add user to the system it show this message "domain unknown: use usernames with domain or set default domain in SIP_DOMAIN freebsd". Before install ser i've add SIP_DOMAIN in /etc/profile allready. Does anybody found this problem before? Please tell me how to fix this problem. ------------------------------------ Suranut Sappaso Computer Center, Khon Kaen University

2 1

[Serusers] Problem in running Serweb
by sumit dengri 07 Jun '06

07 Jun '06

1 0

[Users] lookup problem
by Jean-Michel Foucher 07 Jun '06

07 Jun '06

Hello, here is the situation : one openSER statefull and one openSER registrar on different ports; both db_mode are DB_ONLY. when a UAC A rings UAC B, everything's fine until openSER statefull receives ACK message : as a matter of fact, the domain name was changed before receiving ACK message, therefore, openSER needs to do /lookup("location"); /Unfortunately, openSER could not find the UAC A in database. i had a look to the mysql query made while ACK is treated and actually the username part of address_of_record disappeared : /select ... from location where username=''; /It seems that when /print_where/ (modules/mysql/dbase.c) writes "where" part in mysql query, this function calls /val2str/ (modules/mysql/val.c) which will translate the value to a string. Until this call, everything's just fine, but when /val2str /calls _/mysql_real_escape_string/_, this last function returns an empty string. Any clue? Has anyone already face this problem? Thanks for your help, -- Jean-Michel Foucher OpenWengo, the free and multiplatform VoIP client http://dev.openwengo.com/

2 2

[Users] Auth and Auth-int in openser
by Padmaja RV 07 Jun '06

07 Jun '06

Hi all! Does anybody know how to turn on auth-int in openser? I have authentication enabled in openser but currently i can only see auth in the digest authentication. the server is not producing auth-int. in most other servers like sipcenter server etc,. when we register, they challenge us with auth and auth-int both. is there a separate module in openser that has to be loaded to enable the auth-int feature? Thanks a lot in advance, Regards, Padmaja ----- Original Message ----- From: <users-request(a)openser.org> To: <users(a)openser.org> Sent: Tuesday, June 06, 2006 12:51 AM Subject: Users Digest, Vol 13, Issue 20 > Send Users mailing list submissions to > users(a)openser.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://openser.org/cgi-bin/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)openser.org > > You can reach the person managing the list at > users-owner(a)openser.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Users digest..." > > > Today's Topics: > > 1. Re: Mixing uri_db and auth_db (Bogdan-Andrei Iancu) > 2. RE: Mixing uri_db and auth_db (Edgar Barbosa) > 3. RE: Mixing uri_db and auth_db (Douglas Garstang) > 4. RE: Avpops tutorial (Douglas Garstang) > 5. Openser 1.1 and forward() (Douglas Garstang) > 6. RE: Avpops tutorial (Juha Heinanen) > 7. RE: Avpops tutorial (Douglas Garstang) > 8. RE: Avpops tutorial - documentation (G.Jacobsen) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 05 Jun 2006 19:58:42 +0300 > From: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> > Subject: Re: [Users] Mixing uri_db and auth_db > To: Edgar Barbosa <edgar.barbosa(a)madetowork.com> > Cc: Users(a)openser.org > Message-ID: <448462C2.50502(a)voice-system.ro> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Edgar, > > can you get a backtrace of the core? Can you reproduce this crash or it > occurs randomly? > > regards, > bogdan > > Edgar Barbosa wrote: > >>Another info that may (or not) be helpful... >> >>If I set fork=no and restart openser, it crashes at that point: >> >>0(17790) db_init: Connection 'mysql://root@localhost/astbill' not found in >>pool >> 0(17790) new_connection: Opening MySQL connection: >>mysql://root:@localhost/astbill >> 0(17790) new_connection: Connection type is Localhost via UNIX socket >> 0(17790) new_connection: Protocol version is 10 >> 0(17790) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >> 0(17790) DEBUG:init_mod_child: CHILD , rank=1, module=uri_db >>/etc/init.d/openser: line 118: 17790 Segmentation fault >>start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- >>$OPTIONS >> >> >>Regards, >> Edgar >> >> >> >>-----Original Message----- >>From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On >>Behalf >>Of Edgar Barbosa >>Sent: segunda-feira, 5 de Junho de 2006 17:17 >>To: 'Bogdan-Andrei Iancu' >>Cc: Users(a)openser.org >>Subject: RE: [Users] Mixing uri_db and auth_db >> >>Bogdan, >> >>I think you're right about the max number of connections, since if I >>change >>the module load order it hangs in another module doing the same action >>(requesting a new connection). >> >>But I can't find where that limit may be... >>I already set the my.cnf max_connections from 100 to 500, but without >>success... >>I guess this restriction should be elsewhere... any ideas? >> >>Thanks, >> Edgar >> >> >> >>-----Original Message----- >>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >>Sent: segunda-feira, 5 de Junho de 2006 16:37 >>To: Edgar Barbosa >>Cc: Users(a)openser.org >>Subject: Re: [Users] Mixing uri_db and auth_db >> >>Edgar, >> >>my first guess is that the mysql server does not accept more >>connections. Is that the entire log with debug 9? I got more info, like: >> >>15(30460) DEBUG:init_mod_child: PROC_TCP_MAIN , rank=-4, module=auth_db >>15(30460) db_init: Connection >>'mysql://openser:openserrw@localhost/openser' not found in pool >>15(30460) new_connection: Opening MySQL connection: >>mysql://openser:openserrw@localhost/openser >>15(30460) new_connection: Connection type is Localhost via UNIX socket >>15(30460) new_connection: Protocol version is 10 >>15(30460) new_connection: Server version is 5.0.18-Debian_7-log >> >>what version are you running? >> >>regards, >>bogdan >> >>Edgar Barbosa wrote: >> >> >> >>>Hi Bogdan, >>> >>>Running with debug=9 it seems to hang here: >>> >>>8(16807) new_connection: Connection type is Localhost via UNIX socket >>>8(16807) new_connection: Protocol version is 10 >>>8(16807) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >>>8(16807) DEBUG:init_mod_child: CHILD , rank=6, module=uri_db >>>9(16808) new_connection: Connection type is Localhost via UNIX socket >>>9(16808) new_connection: Protocol version is 10 >>>9(16808) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >>>9(16808) DEBUG:init_mod_child: CHILD , rank=7, module=uri_db >>>10(16809) new_connection: Connection type is Localhost via UNIX socket >>>10(16809) new_connection: Protocol version is 10 >>>10(16809) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >>>10(16809) DEBUG:init_mod_child: CHILD , rank=8, module=uri_db >>>0(16789) new_connection: Connection type is Localhost via UNIX socket >>>0(16789) new_connection: Protocol version is 10 >>>0(16789) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >>>0(16789) DEBUG:init_mod_child: PROC_MAIN , rank=0, module=uri_db >>>11(16810) new_connection: Connection type is Localhost via UNIX socket >>>11(16810) new_connection: Protocol version is 10 >>>11(16810) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >>>11(16810) DEBUG:init_mod_child: PROC_TCP_MAIN , rank=-4, module=uri_db >>> >>>Any idea of what may be wrong? >>> >>>Thanks, >>>Edgar >>> >>> >>>-----Original Message----- >>>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >>>Sent: terça-feira, 30 de Maio de 2006 8:45 >>>To: Edgar Barbosa >>>Cc: Users(a)openser.org >>>Subject: Re: [Users] Mixing uri_db and auth_db >>> >>>Hi, >>> >>>run openser in full debug (set debug=9) and see where it hangs. >>> >>>regards, >>>bogdan >>> >>>Edgar Barbosa wrote: >>> >>> >>> >>> >>> >>>>Hi all, >>>> >>>>I'm having a weird behaviour when mixing auth_db and uri_db. >>>> >>>>With the following openser.cfg, the xlog("L_INFO", "TEST\n") is never >>>>executed... seems that openser just hangs up... >>>> >>>>If I remove the uri_db it works... >>>>If I remove the auth_db it works too... >>>>The problem seems to happen when I mix both... >>>> >>>>Any idea of what may be wrong? >>>>I'm using the latest version (openser 1.0.1). >>>> >>>>Thanks >>>> >>>> >>>> >>>> >>>>debug=3 # debug level (cmd line: -dddddddddd) >>>>fork=yes >>>>log_stderror=yes >>>> >>>>reply_to_via=no >>>>check_via=no # (cmd. line: -v) >>>>dns=no # (cmd. line: -r) >>>>rev_dns=no # (cmd. line: -R) >>>>port=5060 >>>>children=4 >>>>fifo="/tmp/ser_fifo" >>>> >>>> >>>>loadmodule "/usr/lib/openser/modules/mysql.so" >>>>loadmodule "/usr/lib/openser/modules/sl.so" >>>>loadmodule "/usr/lib/openser/modules/auth.so" >>>>loadmodule "/usr/lib/openser/modules/auth_db.so" >>>>loadmodule "/usr/lib/openser/modules/uri_db.so" >>>>loadmodule "/usr/lib/openser/modules/xlog.so" >>>> >>>>modparam("uri_db", "db_url", "mysql://root@192.168.1.104/openser") >>>>modparam("auth_db", "db_url", "mysql://root@192.168.1.104/openser") >>>> >>>>route { >>>> >>>> xlog("L_INFO", "TEST\n"); >>>> >>>>} >>>> >>>> >>>>_______________________________________________ >>>>Users mailing list >>>>Users(a)openser.org >>>>http://openser.org/cgi-bin/mailman/listinfo/users >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >> >> >>_______________________________________________ >>Users mailing list >>Users(a)openser.org >>http://openser.org/cgi-bin/mailman/listinfo/users >> >> >> > > > > > ------------------------------ > > Message: 2 > Date: Mon, 5 Jun 2006 18:03:30 +0100 > From: "Edgar Barbosa" <edgar.barbosa(a)madetowork.com> > Subject: RE: [Users] Mixing uri_db and auth_db > To: "'Bogdan-Andrei Iancu'" <bogdan(a)voice-system.ro> > Cc: Users(a)openser.org > Message-ID: <20060605170324.823E4680085(a)gw.madetowork.com> > Content-Type: text/plain; charset="iso-8859-1" > > Bogdan, > > It occurs everytime I restart openser... > > A backtrace... how can I get one? > > Regards, > Edgar > > > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: segunda-feira, 5 de Junho de 2006 17:59 > To: Edgar Barbosa > Cc: Users(a)openser.org > Subject: Re: [Users] Mixing uri_db and auth_db > > Edgar, > > can you get a backtrace of the core? Can you reproduce this crash or it > occurs randomly? > > regards, > bogdan > > Edgar Barbosa wrote: > >>Another info that may (or not) be helpful... >> >>If I set fork=no and restart openser, it crashes at that point: >> >>0(17790) db_init: Connection 'mysql://root@localhost/astbill' not found in >>pool >> 0(17790) new_connection: Opening MySQL connection: >>mysql://root:@localhost/astbill >> 0(17790) new_connection: Connection type is Localhost via UNIX socket >> 0(17790) new_connection: Protocol version is 10 >> 0(17790) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >> 0(17790) DEBUG:init_mod_child: CHILD , rank=1, module=uri_db >>/etc/init.d/openser: line 118: 17790 Segmentation fault >>start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- >>$OPTIONS >> >> >>Regards, >> Edgar >> >> >> >>-----Original Message----- >>From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On > Behalf >>Of Edgar Barbosa >>Sent: segunda-feira, 5 de Junho de 2006 17:17 >>To: 'Bogdan-Andrei Iancu' >>Cc: Users(a)openser.org >>Subject: RE: [Users] Mixing uri_db and auth_db >> >>Bogdan, >> >>I think you're right about the max number of connections, since if I >>change >>the module load order it hangs in another module doing the same action >>(requesting a new connection). >> >>But I can't find where that limit may be... >>I already set the my.cnf max_connections from 100 to 500, but without >>success... >>I guess this restriction should be elsewhere... any ideas? >> >>Thanks, >> Edgar >> >> >> >>-----Original Message----- >>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >>Sent: segunda-feira, 5 de Junho de 2006 16:37 >>To: Edgar Barbosa >>Cc: Users(a)openser.org >>Subject: Re: [Users] Mixing uri_db and auth_db >> >>Edgar, >> >>my first guess is that the mysql server does not accept more >>connections. Is that the entire log with debug 9? I got more info, like: >> >>15(30460) DEBUG:init_mod_child: PROC_TCP_MAIN , rank=-4, module=auth_db >>15(30460) db_init: Connection >>'mysql://openser:openserrw@localhost/openser' not found in pool >>15(30460) new_connection: Opening MySQL connection: >>mysql://openser:openserrw@localhost/openser >>15(30460) new_connection: Connection type is Localhost via UNIX socket >>15(30460) new_connection: Protocol version is 10 >>15(30460) new_connection: Server version is 5.0.18-Debian_7-log >> >>what version are you running? >> >>regards, >>bogdan >> >>Edgar Barbosa wrote: >> >> >> >>>Hi Bogdan, >>> >>>Running with debug=9 it seems to hang here: >>> >>>8(16807) new_connection: Connection type is Localhost via UNIX socket >>>8(16807) new_connection: Protocol version is 10 >>>8(16807) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >>>8(16807) DEBUG:init_mod_child: CHILD , rank=6, module=uri_db >>>9(16808) new_connection: Connection type is Localhost via UNIX socket >>>9(16808) new_connection: Protocol version is 10 >>>9(16808) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >>>9(16808) DEBUG:init_mod_child: CHILD , rank=7, module=uri_db >>>10(16809) new_connection: Connection type is Localhost via UNIX socket >>>10(16809) new_connection: Protocol version is 10 >>>10(16809) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >>>10(16809) DEBUG:init_mod_child: CHILD , rank=8, module=uri_db >>>0(16789) new_connection: Connection type is Localhost via UNIX socket >>>0(16789) new_connection: Protocol version is 10 >>>0(16789) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >>>0(16789) DEBUG:init_mod_child: PROC_MAIN , rank=0, module=uri_db >>>11(16810) new_connection: Connection type is Localhost via UNIX socket >>>11(16810) new_connection: Protocol version is 10 >>>11(16810) new_connection: Server version is 5.0.21-Debian_2.dotdeb.1-log >>>11(16810) DEBUG:init_mod_child: PROC_TCP_MAIN , rank=-4, module=uri_db >>> >>>Any idea of what may be wrong? >>> >>>Thanks, >>>Edgar >>> >>> >>>-----Original Message----- >>>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >>>Sent: terça-feira, 30 de Maio de 2006 8:45 >>>To: Edgar Barbosa >>>Cc: Users(a)openser.org >>>Subject: Re: [Users] Mixing uri_db and auth_db >>> >>>Hi, >>> >>>run openser in full debug (set debug=9) and see where it hangs. >>> >>>regards, >>>bogdan >>> >>>Edgar Barbosa wrote: >>> >>> >>> >>> >>> >>>>Hi all, >>>> >>>>I'm having a weird behaviour when mixing auth_db and uri_db. >>>> >>>>With the following openser.cfg, the xlog("L_INFO", "TEST\n") is never >>>>executed... seems that openser just hangs up... >>>> >>>>If I remove the uri_db it works... >>>>If I remove the auth_db it works too... >>>>The problem seems to happen when I mix both... >>>> >>>>Any idea of what may be wrong? >>>>I'm using the latest version (openser 1.0.1). >>>> >>>>Thanks >>>> >>>> >>>> >>>> >>>>debug=3 # debug level (cmd line: -dddddddddd) >>>>fork=yes >>>>log_stderror=yes >>>> >>>>reply_to_via=no >>>>check_via=no # (cmd. line: -v) >>>>dns=no # (cmd. line: -r) >>>>rev_dns=no # (cmd. line: -R) >>>>port=5060 >>>>children=4 >>>>fifo="/tmp/ser_fifo" >>>> >>>> >>>>loadmodule "/usr/lib/openser/modules/mysql.so" >>>>loadmodule "/usr/lib/openser/modules/sl.so" >>>>loadmodule "/usr/lib/openser/modules/auth.so" >>>>loadmodule "/usr/lib/openser/modules/auth_db.so" >>>>loadmodule "/usr/lib/openser/modules/uri_db.so" >>>>loadmodule "/usr/lib/openser/modules/xlog.so" >>>> >>>>modparam("uri_db", "db_url", "mysql://root@192.168.1.104/openser") >>>>modparam("auth_db", "db_url", "mysql://root@192.168.1.104/openser") >>>> >>>>route { >>>> >>>> xlog("L_INFO", "TEST\n"); >>>> >>>>} >>>> >>>> >>>>_______________________________________________ >>>>Users mailing list >>>>Users(a)openser.org >>>>http://openser.org/cgi-bin/mailman/listinfo/users >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >> >> >>_______________________________________________ >>Users mailing list >>Users(a)openser.org >>http://openser.org/cgi-bin/mailman/listinfo/users >> >> >> > > > > > ------------------------------ > > Message: 3 > Date: Mon, 5 Jun 2006 11:59:37 -0600 > From: "Douglas Garstang" <dgarstang(a)oneeighty.com> > Subject: RE: [Users] Mixing uri_db and auth_db > To: "Edgar Barbosa" <edgar.barbosa(a)madetowork.com>, "Bogdan-Andrei > Iancu" <bogdan(a)voice-system.ro> > Cc: Users(a)openser.org > Message-ID: > <645FEC31A18FE54A8721500CDD55A7B6031B8DDA(a)mail.oneeighty.com> > Content-Type: text/plain; charset="iso-8859-1" > > I just upgraded from 1.0.1 to the current cvs version. > > Ran openser and got this: > > Jun 5 11:54:47 apollo openser: parse error (156,21-24): syntax error > Jun 5 11:54:47 apollo openser: parse error (156,39-40): bad > forwardargument > > Here's the relevant section of openser.cfg. Line 156 is the line with: > forward(uri:host, uri:port); > > # > # Outgoing PSTN Calls - Dispatch to Audiocodes > # > if ( src_ip == xxx.187.142.203 || > src_ip == xxx.187.142.204 || > src_ip == xxx.187.142.232 || > src_ip == xxx.187.142.201 || > src_ip == xxx.187.142.231 ) { > sl_send_reply("100","Trying"); > xlog ("L_INFO","Outbound PSTN call. Dispatching to > Audiocodes"); > ds_select_dst("2","0"); > forward(uri:host, uri:port); > return; > } > > What's wrong with this? The example in the 1.1 documentation has the same > use of the forward() command! > > Douglas. > > > > ------------------------------ > > Message: 4 > Date: Mon, 5 Jun 2006 12:02:23 -0600 > From: "Douglas Garstang" <dgarstang(a)oneeighty.com> > Subject: RE: [Users] Avpops tutorial > To: <greg(a)thursday.com> > Cc: users(a)openser.org > Message-ID: > <645FEC31A18FE54A8721500CDD55A7B6031B8DDB(a)mail.oneeighty.com> > Content-Type: text/plain; charset="iso-8859-1" > > The documentation is not very good. > It's a wee bit difficult for others to write documentation when they can't > figure the software out, because the developers never wrote any good ones. > Eight months of openser and I'm still trying to work out how all this > branch stuff works. Don't have a clue, and there's no books on this stuff > either. If you ask in the list you get half answers and riddles. > >> -----Original Message----- >> From: Greg Fausak [mailto:lgfausak@gmail.com] >> Sent: Monday, June 05, 2006 9:23 AM >> To: Douglas Garstang >> Cc: Juha Heinanen; users(a)openser.org >> Subject: Re: [Users] Avpops tutorial >> >> >> Douglas, >> >> The programmer did write documentation! That's what we >> currently have. Often it is a good idea for a non-programmer >> (ie. user) >> to write the documentation from their point of view. >> >> Anyway, this is open software and the more people that help >> develop it (and it's documentation) the better. If you don't write >> it I'm sure somebody will someday :-) >> >> >> -g >> >> >> On 6/5/06, Douglas Garstang <dgarstang(a)oneeighty.com> wrote: >> > > -----Original Message----- >> > > From: Juha Heinanen [mailto:jh@tutpro.com] >> > > Sent: Sunday, June 04, 2006 11:01 AM >> > > To: Douglas Garstang >> > > Cc: Bogdan-Andrei Iancu; Sam Lee; users(a)openser.org >> > > Subject: RE: [Users] Avpops tutorial >> > > >> > > >> > > Douglas Garstang writes: >> > > >> > > > I'm not one of the developers. >> > > >> > > you don't need to be. in fact, it would give developers' >> more time to >> > > develop, i.e., write code. >> > >> > How can I write the documentation when I don't understand >> how the software works? >> > Are you suggesting I learn C and look at the code? >> > >> > I'm of the opinion that developers should write >> documentation. If other people try to do it, they make bad >> assumptions based on what they THINK they know. They then >> write bad or wrong documentation which others read, and in >> turn also write bad documentation. It's not a good model. >> > >> > Doug >> > >> > >> > >> > >> > _______________________________________________ >> > Users mailing list >> > Users(a)openser.org >> > http://openser.org/cgi-bin/mailman/listinfo/users >> > >> >> >> -- >> Greg Fausak >> greg(a)thursday.com >> > > > > ------------------------------ > > Message: 5 > Date: Mon, 5 Jun 2006 12:04:29 -0600 > From: "Douglas Garstang" <dgarstang(a)oneeighty.com> > Subject: [Users] Openser 1.1 and forward() > To: "Edgar Barbosa" <edgar.barbosa(a)madetowork.com>, "Bogdan-Andrei > Iancu" <bogdan(a)voice-system.ro> > Cc: Users(a)openser.org > Message-ID: > <645FEC31A18FE54A8721500CDD55A7B6031B8DDC(a)mail.oneeighty.com> > Content-Type: text/plain; charset="iso-8859-1" > > I just upgraded from 1.0.1 to the current cvs version. > > Ran openser and got this: > > Jun 5 11:54:47 apollo openser: parse error (156,21-24): syntax error > Jun 5 11:54:47 apollo openser: parse error (156,39-40): bad > forwardargument > > Here's the relevant section of openser.cfg. Line 156 is the > line with: forward(uri:host, uri:port); > > # > # Outgoing PSTN Calls - Dispatch to Audiocodes > # > if ( src_ip == xxx.187.142.203 || > src_ip == xxx.187.142.204 || > src_ip == xxx.187.142.232 || > src_ip == xxx.187.142.201 || > src_ip == xxx.187.142.231 ) { > sl_send_reply("100","Trying"); > xlog ("L_INFO","Outbound PSTN call. Dispatching to > Audiocodes"); > ds_select_dst("2","0"); > forward(uri:host, uri:port); > return; > } > > What's wrong with this? The example in the 1.1 documentation > has the same use of the forward() command! > > Douglas. > > > > ------------------------------ > > Message: 6 > Date: Mon, 5 Jun 2006 21:08:51 +0300 > From: Juha Heinanen <jh(a)tutpro.com> > Subject: RE: [Users] Avpops tutorial > To: "Douglas Garstang" <dgarstang(a)oneeighty.com> > Cc: users(a)openser.org > Message-ID: <17540.29491.379923.715889(a)rautu.tutpro.com> > Content-Type: text/plain; charset=us-ascii > > Douglas Garstang writes: > > > It's a wee bit difficult for others to write documentation when they > > can't figure the software out, because the developers never wrote any > > good ones. Eight months of openser and I'm still trying to work out > > how all this branch stuff works. Don't have a clue, and there's no > > books on this stuff either. If you ask in the list you get half > > answers and riddles. > > i don't like your attitude. if you don't consider quality of openser or > its documentation good enough and are not willing to do anything about > it, i suggest you look for some other open source product or go for > commercial offerings. > > -- juha > > > > ------------------------------ > > Message: 7 > Date: Mon, 5 Jun 2006 12:20:48 -0600 > From: "Douglas Garstang" <dgarstang(a)oneeighty.com> > Subject: RE: [Users] Avpops tutorial > To: "Juha Heinanen" <jh(a)tutpro.com> > Cc: users(a)openser.org > Message-ID: > <645FEC31A18FE54A8721500CDD55A7B6031B8DDD(a)mail.oneeighty.com> > Content-Type: text/plain; charset="iso-8859-1" > >> -----Original Message----- >> From: Juha Heinanen [mailto:jh@tutpro.com] >> Sent: Monday, June 05, 2006 12:09 PM >> To: Douglas Garstang >> Cc: greg(a)thursday.com; users(a)openser.org >> Subject: RE: [Users] Avpops tutorial >> >> >> Douglas Garstang writes: >> >> > It's a wee bit difficult for others to write documentation >> when they >> > can't figure the software out, because the developers >> never wrote any >> > good ones. Eight months of openser and I'm still trying to work out >> > how all this branch stuff works. Don't have a clue, and there's no >> > books on this stuff either. If you ask in the list you get half >> > answers and riddles. >> >> i don't like your attitude. if you don't consider quality of >> openser or >> its documentation good enough and are not willing to do anything about >> it, i suggest you look for some other open source product or go for >> commercial offerings. > > What source do you recommend I use in writing my documentation? If you > could provide a source, I'd be happy to consider writing some. I did not > question the quality of OpenSER. I questioned the quality of the > documentation for OpenSER. > > Just because something is open source, does not immediately mean it has to > have bad documentation. > > Doug. > > > > ------------------------------ > > Message: 8 > Date: Mon, 5 Jun 2006 21:22:33 +0300 > From: "G.Jacobsen" <g_jacobsen(a)yahoo.co.uk> > Subject: [Users] RE: Avpops tutorial - documentation > To: "Users@Openser. Org" <users(a)openser.org> > Message-ID: <CPEBJFBCDCKKIHJAODHCEEJPCFAA.g_jacobsen(a)yahoo.co.uk> > Content-Type: text/plain; charset="iso-8859-1" > > Douglas, > >> > Are you suggesting I learn C and look at the code? > > Why not ? I looked the whole of last week through the source code and > learnt > a lot. > > If you have ever written a larger piece of software then you would know > that > for programmers every functionality is obvious - while for the users > nothing > is obvious. > > Writing good documentation is almost as time consuming as writing the > software. I suppose that Bogdan and colleagues need also to make money > rather than write extensive documentation. > > In any case, I think they are doing a great job supporting this project. > > Perhaps some simple things which wouldnt incurr an additional burden on > the > developers could help. > > 1. The whole documentation on openser could be in wiki format so users can > add their wisdom to every function as they stumple across it. To start > with > one could duplicate the existing module documentation pages as wiki so > that > everyone can add his comments. And I would also make such new wiki pages > the > default entry point for the documentation rather than the existing module > documentation itself. That way everyone would be reminded to add his > wisdom. > > 2. ALL functions and keywords of all modules could also be accessable on > ONE > page (possibly by extending the cookbook) which then links to the wikis > for > the modules. I often find myself hunting through several module docs, > websites and search engines to find insight into a function. > > Cheers > > Gerry > > > > > -----Original Message----- > From: users-bounces(a)openser.org [mailto:users-bounces@openser.org]On > Behalf Of Douglas Garstang > Sent: Montag, 5. Juni 2006 21:02 > To: greg(a)thursday.com > Cc: users(a)openser.org > Subject: [Bulk] RE: [Users] Avpops tutorial > > > The documentation is not very good. > It's a wee bit difficult for others to write documentation when they can't > figure the software out, because the developers never wrote any good ones. > Eight months of openser and I'm still trying to work out how all this > branch > stuff works. Don't have a clue, and there's no books on this stuff either. > If you ask in the list you get half answers and riddles. > >> -----Original Message----- >> From: Greg Fausak [mailto:lgfausak@gmail.com] >> Sent: Monday, June 05, 2006 9:23 AM >> To: Douglas Garstang >> Cc: Juha Heinanen; users(a)openser.org >> Subject: Re: [Users] Avpops tutorial >> >> >> Douglas, >> >> The programmer did write documentation! That's what we >> currently have. Often it is a good idea for a non-programmer >> (ie. user) >> to write the documentation from their point of view. >> >> Anyway, this is open software and the more people that help >> develop it (and it's documentation) the better. If you don't write >> it I'm sure somebody will someday :-) >> >> >> -g >> >> >> On 6/5/06, Douglas Garstang <dgarstang(a)oneeighty.com> wrote: >> > > -----Original Message----- >> > > From: Juha Heinanen [mailto:jh@tutpro.com] >> > > Sent: Sunday, June 04, 2006 11:01 AM >> > > To: Douglas Garstang >> > > Cc: Bogdan-Andrei Iancu; Sam Lee; users(a)openser.org >> > > Subject: RE: [Users] Avpops tutorial >> > > >> > > >> > > Douglas Garstang writes: >> > > >> > > > I'm not one of the developers. >> > > >> > > you don't need to be. in fact, it would give developers' >> more time to >> > > develop, i.e., write code. >> > >> > How can I write the documentation when I don't understand >> how the software works? >> > Are you suggesting I learn C and look at the code? >> > >> > I'm of the opinion that developers should write >> documentation. If other people try to do it, they make bad >> assumptions based on what they THINK they know. They then >> write bad or wrong documentation which others read, and in >> turn also write bad documentation. It's not a good model. >> > >> > Doug >> > >> > >> > >> > >> > _______________________________________________ >> > Users mailing list >> > Users(a)openser.org >> > http://openser.org/cgi-bin/mailman/listinfo/users >> > >> >> >> -- >> Greg Fausak >> greg(a)thursday.com >> > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > > ___________________________________________________________ > Try the all-new Yahoo! Mail. "The New Version is radically easier to > use" - The Wall Street Journal > http://uk.docs.yahoo.com/nowyoucan.html > > > > > ------------------------------ > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > End of Users Digest, Vol 13, Issue 20 > ************************************* >

2 2

[Users] Segmentation fault on openser
by Edgar Barbosa 07 Jun '06

07 Jun '06

Hi, I'm having problems when defining both the auth_db:db_url and the uri_db:db_url parameters. Openser crashes when restarting (everything goes ok if I set just one). I've restricted my openser.cfg to the minimum, to filter other sources of problems. With the following cfg, openser crashes on my machine (logs in attachment) with a segmentation fault error. ============================== debug=9 fork=no log_stderror=yes loadmodule "/usr/lib/openser/modules/mysql.so" loadmodule "/usr/lib/openser/modules/sl.so" loadmodule "/usr/lib/openser/modules/xlog.so" loadmodule "/usr/lib/openser/modules/auth.so" loadmodule "/usr/lib/openser/modules/auth_db.so" loadmodule "/usr/lib/openser/modules/uri_db.so" modparam("auth_db", "db_url", "mysql://root@localhost/openser") modparam("uri_db", "db_url", "mysql://root@localhost/openser") route { xlog("L_WARN", "TEST"); } ============================== I'm using the latest version, and tried the debian package and compiling from the source... same result... Seems the problem may be related to the number of database connections... but I've expanded it on mysql, with no success... Anyone could reproduce this problem? Any suggestions of how can I solve it? Thanks, Edgar

2 4

Re: [Users] ACC module detect-direction
by Glenn Dalgliesh 07 Jun '06

07 Jun '06

Ok, checked record-router and it is present with ftag but from to revesed . What debug output should I look at next. --------------------- Sent with ChatterEmail True push email for the Treo Smartphone www.chatteremail.com -----Original Message----- From: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> Date: Monday, Jun 5, 2006 8:19 pm Subject: Re: [Users] ACC module detect-direction Hi Glenn, For this feature to work, you need to be sure that you do record_route() on the INVITE and that "append_fromtag" RR module param is not disable. regards, bogdan Glenn Dalgliesh wrote: > modparam("acc", "detect_direction", 1) in CVS headI tried this option thinking that it would cause radius records to maintain the same values for username,to,from as the initial INVITE. ie. if the number you called hangup and not you the would still reflect your username and the called partyIs this correct? and if so this might be a bug this it seems to have no effect...Thanks > _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users